Hako Hako Scrubmaster B45 Tb510 Nova Baterija nakup rabljenega (2.532)

Stanje: rabljeno, obratovalne ure: 10.420 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ES2234, prevoženi kilometri: 74.155 km, moč: 75 kW (101,97 KM), prva registracija: 05/2016, skupna masa: 4.900 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x2, največja dovoljena obremenitev: 1.900 kg, lastna masa: 3.000 kg, naslednji pregled (TÜV): 01/2027, gorivo: dizel, voznikova kabina: dnevna kabina, vrsta prenosa: hidrostat, emisijski razred: Euro 5, Oprema: filter saj, hidravlika, nizka raven hrupa, * Hako Citymaster 2000 suction-sweeper * Single ownership / former municipal vehicle * Registered as a self-propelled work machine, 50 km/h (exempt from environmental badges) * Upon request, we will provide a complimentary full engine service upon sale, including timing belt, water pump, oil, and filters * New disc brooms * Low-emission Euro 5 * 7,299 working hours * 10,420 total operating hours * 74,155 kilometres * VW 2.0 TDI industrial engine (4-cylinder) * Diesel particulate filter * Reversing camera * Switchable all-wheel steering * Adjustable sweeping width from 140 cm to 260 cm * Fresh and recirculation water pumps * 350-litre fresh water tank * Tiltable stainless steel debris container * ISRI suspension driver's seat * Yellow rotating beacon Nodpfx Ahjmnp Afs Usct * Ready for immediate use --- We sell exclusively under our terms and conditions, excluding any warranty. Subject to errors, modifications, and prior sale. --- * We are available Monday to Friday from 9:00 am to 5:00 pm without interruption, Saturdays by appointment. Outside these hours, telephone arrangements are possible. * We gladly accept your current used machine/vehicle as part exchange. * Priority is given to sales to traders and exporters—this applies to our entire vehicle stock. * All information provided is non-binding. Subject to errors, modifications, and prior sale.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 22.348 km, moč: 55 kW (74,78 KM), prva registracija: 04/2018, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x4, lastna masa: 1.950 kg, naslednji pregled (TÜV): 05/2026, gorivo: dizel, medosna razdalja: 1.600 mm, voznikova kabina: drugo, vrsta prenosa: hidrostat, emisijski razred: Euro 5, obratovalne ure: 3.979 h, Oprema: filter saj, hidravlika, klimatska naprava, pogon na vsa štiri kolesa, Hako Citymaster 1600 as winter service vehicle From first owner – former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge by us prior to sale Machine version with new drive pedal system 2,293 operating hours 3,979 total engine hours 22,348 kilometers Including Kif front broom type CM 1600, 1,300 mm wide, year of manufacture 2019 (like new/never used for snow) Including Gmeiner salt spreader type Husky 500V FS, year of manufacture 2019 (as new/used twice for testing) Nsdpfx Asx Dlb Seh Ujct 4×4 all-wheel drive – hydrostatic all-wheel drive system Reversing camera Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,950 kg Permissible total weight: 3,500 kg Dimensions (LxWxH): 4,016 mm / 1,210 mm / 1,970 mm (without attachments) Driving speed: 0-40 km/h Working speed: 0-24 km/h Noise insulation package Selectable working speeds: 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive system 2-circuit high-pressure hydraulics • Circuit 1 (front): 0–50/0–70 l/min, 225 bar • Circuit 2 (rear): 0–20/25/30 l/min, 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg The spreader is powered and operated by the vehicle’s hydraulic system. Other possible applications with additional attachments from HAKO such as rotary broom, snow plough, and lawn mower (not included in delivery) Subject to errors, change, and prior sale. We sell exclusively on the basis of our Terms and Conditions and exclude any form of warranty. Subject to errors, change, and prior sale. We are available Monday - Friday from 9:00 am to 5:00 pm without interruption, Saturday by appointment, outside these hours appointments by phone are possible. We are happy to accept your current used device/vehicle as trade-in. Sales to commercial customers and exporters are given priority, this applies to our entire vehicle stock. The above information is non-binding, subject to error/change and prior sale!

Stanje: pripravljen za uporabo (rabljen), obratovalne ure: 3.979 h, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 22.348 km, moč: 55 kW (74,78 KM), prva registracija: 04/2018, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x4, lastna masa: 1.950 kg, naslednji pregled (TÜV): 05/2026, gorivo: dizel, medosna razdalja: 1.600 mm, voznikova kabina: drugo, vrsta prenosa: hidrostat, emisijski razred: Euro 5, Oprema: filter saj, hidravlika, klimatska naprava, pogon na vsa štiri kolesa, Hako Citymaster 1600 as Winter Service Vehicle - From 1st owner – former municipal/government vehicle - Major engine service with timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale - Machine version with new drive pedal system - 2,293 hydraulic hours - 3,979 total operating hours - 22,348 kilometers - Includes Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (as new/never used in snow) - Includes Gmeiner salt spreader, type Husky 500V FS, year 2019 (nearly new/used twice for testing) - 4x4 all-wheel drive – hydrostatic all-wheel drive Nsdpjx Dlahsfx Ah Uect - Rear view camera - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,950 kg - Permissible total weight: 3,500 kg - Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) - Driving speed 0-40 km/h - Working speed 0-24 km/h - Noise insulation package - Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: Water-cooled 4-cylinder VW industrial diesel engine - Low-emission Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar, Circuit 2 (rear) 0–20/25/30 l/min 195 bar - Hydraulic service brake operated via foot pedal - Cabin with air-suspended driver’s seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Unladen weight: 1,950 kg - Spreader is powered and operated by the machine hydraulics - Additional attachments from HAKO, such as sweepers, snow ploughs, and lawnmowers are possible (not included) - Errors, changes, and interim sales reserved We sell exclusively under our terms & conditions and excluding any warranty. Errors, changes, and interim sales reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. without interruption. Saturdays by appointment. Outside these hours, appointments by phone are possible. We gladly accept your used machine/vehicle in trade-in. Sales to commercial customers and exporters are preferred. This applies to our entire vehicle inventory. All details are non-binding; subject to errors, modifications, and prior sale!

Stanje: rabljeno, obratovalne ure: 1.567 h, skupna masa: 150 kg, HAKO Scrubber Dryer Model: HAKOMATIC B 650 Drive: ELECTRIC Walk-behind Condition: Good Currently 20 units in stock Item No.: B 650 Manufacturer: HAKO Year of manufacture: see photo – good visual condition Hour meter reading: 1567 2 new brushes Electrically powered Battery with full capacity Weight: approx. 150 kg Original price approx. €13,900 Price indicated is for collection from stock at 47441 Moers Various cleaning and scrubber-dryer machines in stock We offer the item as pictured. Inspection is explicitly encouraged. General Information: We offer various items here, describing them as accurately as possible and providing informative photos. Further details on this item cannot be given. Opportunity for inspection every Tuesday and Thursday from 9 a.m. to 4 p.m. by prior telephone arrangement. Immediate collection possible if needed. Unless otherwise expressly stated, this is a USED item. Nsdpoxp I S Dsfx Ah Ujct We offer the item as pictured. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packing and shipping costs. (Shipping costs are approx. €150 net, depending on distance) All dimensions are approximate.

Stanje: rabljeno, obratovalne ure: 1.500 h, 15 units HAKO floor scrubber-dryer Model: HAKOMATIC B 650/07 Drive: ELECTRIC Walk-behind Condition: good Item No.: B 650 / 07 Manufacturer: HAKO Year of manufacture: see photo – visually in good condition Operating hours vary 2 brushes Electric powered Battery with full power Integrated charger Weight: approx. 320 kg Original price approx. €13,900 Price stated is per unit when purchasing the entire quantity Collection from warehouse 47441 Moers Various cleaning and scrubbing machines in stock Nodpfx Aew Ufxmjh Usct We sell as pictured. Inspection explicitly encouraged. General information: We offer various items here, described as accurately as possible and with informative photos. No further specifications about the item can be provided. Inspection is possible by prior telephone appointment on Tuesday and Thursday between 9 am and 4 pm. Items can be taken immediately if required. Unless otherwise stated, this offer is for USED EQUIPMENT. We sell as shown in the photos. All offers ex-stock 47441 Moers. If shipping is required, please contact us to discuss packaging and shipping costs. All dimensions are approximate. Further offers in catering equipment, warehouse technology, trolleys, etc. can also be found in our shop.

Stanje: rabljeno, obratovalne ure: 172 h, skupna masa: 1.500 kg, vrsta goriva: električni, HAKO Scrubber-Dryer Cleaning Machine Model: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / EXCELLENT condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see image – visually in excellent condition Hour meter: "172" hours 4 brushes Electric operation Battery: full power 36 V DC / 5.5 KW Weight: 1,500 kg Original price approx. €39,900 Price quoted is for collection from our warehouse, 47441 Moers Various cleaning and scrubber-dryer machines in stock. Sale as pictured. Inspection expressly offered. General Information: We offer various items described as accurately as possible with detailed photos. No further information about the item can be provided. Nodpfx Ahjwfflve Ujct Viewing is possible by prior telephone arrangement on Tuesdays and Thursdays between 9 a.m. and 4 p.m. Immediate collection is possible if required. Due to time constraints, we can only respond to inquiries about this item if you include your telephone number in your request. Unless otherwise explicitly stated, this offer refers to USED EQUIPMENT. Items are offered as shown in the images. All offers ex stock 47441 Moers. If shipping is required, please contact us to discuss packaging and shipping costs. (Shipping costs are approx. €350 net, depending on distance) All dimensions are approximate.

Stanje: rabljeno, obratovalne ure: 4.446 h, vrsta goriva: električni, barva: rdeča, HAKO Scrubber Dryer Model: HAKO B 750 R Drive: ELECTRIC Condition: see photos / good condition Used item characteristics (defects can be discussed by phone) Battery charges fully Wheels replaced – good tread Item No.: B 750 R Manufacturer: HAKO Year of manufacture: see photo – visually excellent Operating hours meter shows "4446" 2 brushes Electric powered (Charger not included in the offer) New price approx. €22,900 Price quoted for collection from warehouse at 47441 Moers Various cleaning and scrubber dryers in stock We offer as pictured. Inspection is expressly encouraged. General: We offer various items and describe them to the best of our ability, with detailed photos. No further information about the item can be provided. Viewing is possible by telephone appointment on Tuesdays and Thursdays between 9 am and 4 pm. If required, the item can be taken immediately. For time reasons, we can only respond to enquiries about this item if you include your telephone number with your request. Ncedpfxswffw So Ah Ujt Unless explicitly stated otherwise, this is a USED ITEM. We sell as pictured. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approx. €350 net, depending on distance) All measurements are approximate.

Stanje: rabljeno, obratovalne ure: 3.163 h, vrsta goriva: dizel, gorivo: dizel, HAKO Floor Cleaning Machine / Sweeper-Suction Machine Model: HAKO JONAS 1450 D Drive: Diesel Condition: OK, see photos Used equipment features (details of defects available by phone) Battery fully charged Large collection hopper With hydraulic discharge container Sweeping brushes replaced Item no.: 1450 D Manufacturer: HAKO Year of construction: see photo – visually in good condition Operating hours counter: "3163" 2 brushes Fuel: Diesel Price is for collection from warehouse, 47441 Moers Various cleaning and scrubber-dryer machines in stock Offered as shown. Inspection is expressly offered. General information: We offer various items here, which we describe as accurately as possible, along with detailed photos. Further details about the item cannot be provided. We offer the possibility to inspect the item by appointment, Tuesdays and Thursdays between 9 a.m. and 4 p.m. Collection possible immediately if required. We can only respond to inquiries regarding this item if you provide a phone number. Unless explicitly stated, this is a USED ITEM. Offered as shown in the pictures. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs approximately €650 net, depending on distance) All dimensions are approximate. Ncedpfx Ahjwffaaj Ujt

Stanje: dober (rabljeno), Nova BioProfile Flex Automated Cell Culture Analyzer The BioProfile is an automated cell culture analyzer that measures up to 15 key cell culture parameters. By combining up to five separate instruments into one user-friendly device, the BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to using multiple instruments. The FLEX automatic sampler withdraws samples from its two fermenters and transfers them to the FLEX analyzer’s measurement unit. Data received by the FLEX autosampler were compared with manually collected samples from the reactor and subjected to statistical analysis. Specifications Sample analysis time: 2.5 minutes (gases only – pO₂ + pCO₂), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests) Operating temperature range: 15–30 °C (59–86 °F) Relative operating humidity range: 20–85 % Sample volume: 1 ml (for all modules) Sampling options: Individual via syringe/cup; automated batch with 20-position sample tray; online, automated from up to ten bioreactors Electrical requirements: 90–264 VAC, 50 to 60 Hz (universal power supply) System size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without reagents Selectable modular test menu options: - Chemistry/gases - Cell density/viability - Osmolality - IgG System integration options: - Online autosampler - Sample collection system - OPC connectivity Find more items—new and used—in our shop! Ncsdpfx Aheq Tp Tds Uet International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2010, prevoženi kilometri: 1.081 km, moč: 15 kW (20,39 KM), prva registracija: 04/2010, skupna masa: 1.787 kg, vrsta goriva: električni, barva: rdeča, konfiguracija osi: 4x2, največja dovoljena obremenitev: 1.080 kg, lastna masa: 707 kg, zavore: drugo, voznikova kabina: drugo, vrsta prenosa: drugo, emisijski razred: noben, število sedežev: 1, * German vehicle * Condition as shown in photos * Ideal for large halls, parking garages, etc... * Only 1,081 original operating hours * Perfect for use in large halls, logistics centers, and parking garages thanks to zero emissions from electric drive * Compact high-performance scrubber-dryer for wet scrubbing and vacuum-drying in a single pass * Combination machine with additional sweeping system and dust extraction * Hako B1100 Sweeping and Scrubber-Dryer Machine * Maximum theoretical surface coverage: up to 7,000 m²/h * Wet-cleaning unit * Working width, brush head: 102 cm * Brush diameter (2 pieces): 53 cm * Brush speed: 210 rpm Nsdpfxovhqiyo Ah Uoct * Brush motors (2 units): 2 x 700 W * Adjustable brush pressure up to 540 N * Squeegee (working width): 126 cm * Clean/dirty water tanks: 185/185 liters * Sweeping and suction unit: * Working width: 138 cm * Electrical system * Rated voltage: 36 V * Drive battery: 36 V/640 Ah5 PzS * Drive motor: 2,000 W * Travel speed: up to 8.0 km/h * Sweeping and suction – Fine and coarse debris are reliably collected in the dry section ahead of the scrub deck. * Wet scrubbing – Even stubborn encrustations are effectively removed by the rotating disc brushes * Vacuum-drying – The floating, parabolically shaped squeegee leaves the floor immediately dry and ready for use * Large tank capacity – Long working times and short set-up intervals thanks to a flexible partition between clean and dirty water sections. * Dirty-water recycling system for multiple use of cleaning water. – In combination with the detergent dosing system, ensures consistently high cleaning quality. – Significantly reduces set-up times and water consumption. – Option to use fresh water or recycled dirty water. The clean water tank always stays clean If a new TÜV (roadworthiness) inspection is required, we are happy to provide an offer via our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV inspection, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Please note: We offer and strongly recommend a viewing and inspection of the goods so that buyers have a clear understanding of their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in the listing. Buyers are obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta aktuacije: električni, Kapaciteta proizvodnje dušikovega plina: 30 Nm3/h Iztocni tlak dušika: 200 BARG Čistost dušikovega plina: 99,999 % Nsdpfexrcausx Ah Ujct Urna poraba energije: 42 kWh Set razdelilnika dušika: 2 kosa

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Combi floor cleaning machine Hako B43 S with accessories: Ncodpfxety Su Ej Ah Ust Manufacturer: HAKO Werke GmbH Germany S/N 740671353081 Fully functional Suction pump, scrub brush, or squeegee Battery charger 24 V charging voltage 800 W 90 kg CE marked

Stanje: novo, Extra-long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and distortion-free, making them durable and consistently flat - Simultaneous opening & closing of the jointer tables with single-point locking - Powerful industrial motor - Fixed mounted extraction hood - Robust steel/cast iron construction - Large fence 1200 x 150 mm (standard with auxiliary fence) Ncjdjcq E Uuepfx Ah Uot - Material feed with four speeds via separate motor - Thicknessing table raised on four sturdy columns, protected by dust bellows - Helical gear infeed roller on the thicknesser - Rubber outfeed roller at the exit of the thickness planer - Preparation for slot mortiser attachment - Digital display for thickness height adjustment (accuracy 0.1 mm) - Automatic star-delta switch Technical Data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thickness table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter/planer knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 - 40 %, 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Includes options: - "Teresa" cutterblock Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of thickness table with digital display - Thickness table with 2 swing-away idle rollers

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Options included: - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Njdped Akygefx Ah Uect Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Ncodpfx Aecuwpteh Uot Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, DEMONSTRATION MACHINE For sale is a TEKNATOOL Nova Nebula 230 DVR wood lathe, featuring direct drive with a speed range of 50 – 4,000 RPM. The demonstration machine is in excellent condition. Technical Data: - Center height: approx. 230 mm - Distance between centers: max. 680 mm - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Taper in headstock and tailstock: MT2 - Infinitely variable speed (direct drive): 50 – 4,000 RPM - 24-position indexing system - Motor power: 1.7 kW / 2.3 HP (230 V), with forward and reverse - Tailstock quill travel: 120 mm (with scale and trapezoidal thread) - Weight: 204 kg - Shipping weight: approx. 225 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Nodpfx Ahoy N R A Ij Usct Austria: €105.00 incl. VAT Germany: €125.00 incl. VAT South Tyrol: €150.00 incl. VAT Related terms: wood lathe, metal lathe, lathe, turning lathe, woodturning, turning tools, wood turning, lathing, machine Reference: R-A0117

Stanje: dober (rabljeno), Leto izdelave: 2017, Koda: 0384 Znamka: SCM Model: SI 400 EP NOVA – CE Standard Elektronsko krmiljena 3-osna formatna žaga s predrezilom za obdelavo plošč, pohištva, po meri izdelanega pohištva, okenskih in vratnih okvirjev, lesenih vrat, mizarskih del, plastike in kompozitnih materialov – CE standard – letnik 2017 Tehnični podatki: Dolžina vozička iz aluminijeve zlitine: 3200 mm Dimenzije fiksne mize: 1040 x 630 mm Kapaciteta formatiranja: 3200 x 3200 mm Nagib žaginega lista od 90° do 45° Maksimalni premer žaginega lista: 400 mm, izvrtina 30 mm Premer predrezila: 120 mm, izvrtina 30 mm Maksimalna višina reza pri 90°: 140 mm Maksimalna višina reza pri 45°: 99 mm Hitrost vrtenja žaginega lista: 3000/4000/5000 obr/min Hitrost vrtenja predrezila: 8500 obr/min Širina reza z vzdolžnim vodilom: 1270 mm Moč motorja glavnega lista: 7 kW Moč motorja predrezila: 0,9 kW Premer sesalnega priključka pod mizo: 120 mm Premer sesalnega priključka na visečem zaščitnem pokrovu: 80 mm Ncedpfsy R N Sdsx Ah Uet Razširitev mize Paralelogramska zaščita 3 krmiljene osi: dvig žaginega lista – nagib žaginega lista – vzdolžno vodilo Skupne dimenzije sestavljenega stroja: 3400 x 3900 x 1600 mm (V) Transportne dimenzije: 3400 x 2200 x 1600 mm (V) Teža: 780 kg

Stanje: novo, Prodajam profesionalno črpalko italijanskega proizvajalca LOWARA (Xylem). Model BGM11/C E2 – nova, neuporabljena črpalka, skladiščna zaloga. V kompletu so originalna embalaža in navodila. Črpalka je idealna za vodne, hišne in industrijske instalacije. Tehnični podatki: Proizvajalec: LOWARA Njdpfx Ahoyvambj Uoct Model: BGM11/C E2 Moč P1: 1,34 kW Napajanje: 230 V (1 faza) Frekvenca: 50 Hz Pretok: 20–70 l/min Dvižna višina: 30–45,5 m Maks. tlak: približno 8 bar Stopnja zaščite: IPX5 Temperatura tekočine: do 40°C Material: nerjaveče jeklo (inox) Teža: cca 14 kg

Stanje: novo, Prodajam profesionalno industrijsko črpalko LOWARA BG9/D. Črpalka je nova, nikoli uporabljena, skladiščni kos. V kompletu je originalna embalaža in navodila. Znamka LOWARA (Xylem) je ena najboljših v industriji industrijskih črpalk. Idealna za vodne inštalacije, industrijo, kmetijstvo, tlačne sisteme ter kot vodna črpalka. Tehnični podatki: Ncsdpfsyval Rjx Ah Ust Proizvajalec: LOWARA Model: BG9/D Moč: 1,1 kW Izhodna moč: 0,9 kW Napajanje: 3 faze 400V Frekvenca: 50 Hz Pretok: 20–65 l/min Dvižna višina: 28,6–41,1 m Maksimalni tlak: 8 bar Material: nerjaveče jeklo (inox) Priključki: 1 1/4" / 1" Teža: cca 14,7 kg Stanje: Novo – skladiščno Možne manjše sledi skladiščenja na embalaži

Stanje: rabljeno, Leto izdelave: 2003, Tlak 250 t Hod 20 - 190 mm Število hodov 25 - 140 /min Izsev 460 mm Prehod med stenami ohišja 590 mm Vgradna višina 690 mm Površina mize 1500 x 880 mm Prehodna odprtina v mizi 950 x 250 mm Višina mize nad tlemi 900 mm Površina batnice 870 x 725 mm Nastavitev batnice 120 mm Pogonska moč 30,0 kW Teža 32,0 t Nsdpfjvuun Tex Ah Uect Prostorske zahteve pribl. 2,34 x 2,38 x 3,99 m x m x m s tekoče nastavljivim pogonom, svetlobno pregrado (znamka Sick), hidravlično sklopko/ zavorno kombinacijo, hidravličnim protivzorčnim varovanjem v batnici, samodejno nastavitvijo hoda, motorizirano nastavitvijo batnice, pnevmatskim izravnalnikom teže batnice, fiksno mizo, pnevmatsko vlečno blazino v mizi (20 t), motorizirano centralno mazanje, upravljalna konzola z dvoročnim upravljanjem Svetla širina med veznimi vijaki 940 mm Stranski prehod 900 mm

Stanje: rabljeno, Leto izdelave: 2007, Tlak 40 t Hod 12 - 100 mm Število hodov 60 - 150 /min Iztegnitev 220 mm Montažna višina 340 mm Površina mize 650 x 480 mm Površina drsnika 370 x 300 mm Nastavitev drsnika 70 mm Pogonska moč 4,0 kW Teža 3,0 t Dimenzije (ŠxGxV) 1,2 x 1,5 x 2,3 m S kontinuirno nastavljivim pogonom, pnevmatsko sklopko/zavorno kombinacijo, svetlobno zaveso (Sick), hidravlično zaščito pred preobremenitvijo, pnevmatskim uravnoteženjem mase drsnika, ročno nastavitvijo hoda, ročno nastavitvijo drsnika, centralnim mazanjem, fiksno mizo, dvoročno in nožno upravljanje. Ncjdpfx Aoyx Inteh Ujt

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, kapaciteta baterije: 875 Ah, preostala kapaciteta baterije: 85 odstotek, napetost baterije: 24 V, skupna dolžina: 830 mm, skupna širina: 430 mm, skupna višina: 630 mm, skupna masa: 610 kg, Viličarska baterija 24V 7PzS875, baterija testirana na 85% Teža: 610 kg Dimenzije: 827 mm x 430 mm x 630 mm Baterija je bila servisirana in testirana s strani strokovnega podjetja. Kapacitetni test (C5 izpustni test): 744/875 Ah Ncjdpfx Aey Ry Hxsh Ust Preostala kapaciteta: 85% Z Aquamatik polnilnim sistemom (BFS) S polskimi vijaki, vendar BREZ končnega odvoda

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, kapaciteta baterije: 625 Ah, preostala kapaciteta baterije: 89 odstotek, napetost baterije: 48 V, skupna dolžina: 830 mm, skupna širina: 630 mm, skupna višina: 630 mm, skupna masa: 899 kg, vrsta goriva: električni, Viličarska baterija 48V 5PzS625, 89% PREVERJENA Letnik: 2021 Dimenzije (d x š x v): 825mm x 625mm x 630mm Teža: 899kg Nedpfsy Ryy Sjx Ah Uect Baterijo je vzdrževalo in testiralo strokovno podjetje. Test kapacitete (C5 test praznjenja): 559/625 Ah Preostala kapaciteta: 89% Z Aquamatik polnilnim sistemom (BFS) S polnimi vijaki, brez končnega odvoda

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, kapaciteta baterije: 465 Ah, preostala kapaciteta baterije: 100 odstotek, napetost baterije: 48 V, skupna dolžina: 1.030 mm, skupna širina: 350 mm, skupna višina: 785 mm, skupna masa: 770 kg, vrsta goriva: električni, Forklift Battery 48V 3PzS465, 100% TESTED Year of manufacture: 2022 Dimensions (LxWxH): 1030mm x 350mm x 785mm Weight: 770kg Battery serviced and tested by a specialist company. Capacity test (C5 discharge test): 489/465Ah Remaining capacity: 100% With Aquamatic filling system (BFS) With terminal bolts but WITHOUT end discharge cable Suitable for models from: ATLET: UHE, ULS 120, ULS 140, UND 120, UNE Baumann: EVU, EVU 20-30 Bison: P2004, P 2504 Caterpillar: NOH 10 K C, NOH 10 NH, NR 16 C Crown: ESR 5220-1.4 DIMOS: EFY P 1004-R Ford: FOR 410 Hyster: R 1.4, R 1.6 N, R 1.4 Indos: S 16 Jungheinrich: ETM 12.5, ETM 13.5, ETM 14, ETM 20, ETM/V-Q 13.5-20, ETV 10, ETV 12.5, ETV 13.5, ETV 14, ETV 16, ETV 20, ETV 220, ETV-Q 20, ES15 Komatsu: FB 14 RW-3E, FB 16 RW-3E LAFIS: LEV 16, LEV 20, LEV 25, LEV 30 Lansing: EKH 10.3, ERT 12/13.5, ERT 12/16, V 10 E 01, V 10 E 02 Linde: A (CHASSIS 1120), R 10 BN, R 10 CN, R 10 N, R 12 BN, R 12 CN, R 12 N, R 14 CN, R 14 N, R 14 SN, R 16 CN, R 16 N, R 16 SN, R 20 N, R 20 W, V 10 E, MIC, WR 14, WR 16 Mitsubishi/NYK: OPBH 10 KC, OPBH 10 NH, RB 16 NC Nacco: A 350 Nichiyu: FBRF 14, FBRF 16 Pimespo: THESI A, XR 12N, XR 14 N ROCLA: PHS 10, PHX 10, TEC, STB, WR 12, WR 13, WR 14, WR 16 Still/Saxby/Wagner: FM 14 N, FM 17 N, FM-X 10 N, FM-X 12 N, FM-X 14 N, FM-X 17 N, FRER 12, GX-X Ncedsy Ryu Njpfx Ah Uot Unicarriers/Nissan/Atlet: UNG C-SIZE U4 LIGHT YALE: MO 10 S, MR 14, MR 16, MR 16 N

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, kapaciteta baterije: 225 Ah, preostala kapaciteta baterije: 74 odstotek, napetost baterije: 24 V, skupna dolžina: 645 mm, skupna širina: 195 mm, skupna višina: 575 mm, skupna masa: 193 kg, Viličarska baterija 24V 3PzB225 - baterija testirana na 74% Za Toyota & BT z zaklepom baterije Leto izdelave: 2022 Teža: 193 kg Mere: 645 mm x 195 mm x 575 mm Baterijo je servisiralo in testiralo strokovno podjetje Test kapacitete (C5 test praznjenja): 168/225 Ah Preostala kapaciteta: 74 % Z Aquamatik sistemom za polnjenje (BFS) Ncsdpfx Aoy Ryimsh Uet S polnimi vijaki, vendar BREZ končnega odvoda