Dvovretenska Vrtalna Naprava nakup rabljenega (13.027)

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Ponujamo CNC-erozijsko strojno orodje. Gibi po osi X/Y/Z: pribl. 565 mm/400 mm/415 mm, velikost mize: 840 mm/600 mm, največja teža obdelovanca: pribl. 1000 kg, največja višina dielektrika nad mizo: pribl. 360 mm. Dimenzije stroja X/Y/Z: pribl. 1110 mm/1840 mm/2780 mm, teža stroja: pribl. 2750 kg. Ogled stroja na lokaciji je možen. Fodjzrhg Tepfx Acdogf

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, obratovalne ure: 4.577 h, Funkcionalnost: popolnoma funkcionalen, moč: 390 kW (530,25 KM), leto zadnje generalne obnove: 2026, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC Directive 50 mm EC towing eye including coupling shoe Tires: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side fenders) Fgsdpfjyhckmsx Acdof Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust directed upwards Load-dependent control of material feed including automatic scraper floor reversal Fuel tank: 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - double lock Standard: “Streusel plus” flail tip Centrally positioned slide bars Electric pump for cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold in/out rear belt, release travel drive) when engine is off 24-V electric control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh size between 30 - 280 mm, grade on request), including one-piece rear door Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor 4 m, 1,800 mm wide “classic” Antimagnetic centerpiece on rear discharge conveyor Reinforcement plates on feed hopper (Hardox material) on both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Optional Equipment: Hydraulic travel drive Fuel tank 600 l Flail tip C1 “Bear Claw” with carbide Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separated drive for feed roller and scraper floor – "Twin Drive" Duomatic coupling Smooth impact plate Fine-shredding basket Delivery date to be agreed

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, obratovalne ure: 5.189 h, Funkcionalnost: popolnoma funkcionalen, moč: 390 kW (530,25 KM), leto zadnje generalne obnove: 2026, Equipment: Basic package Inventhor 9: MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard Auxiliary hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gearbox 380 kW – VARIO – Load-sensing system Fuel tank 950 liters Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally arranged slide strips 24-V electrical control Additional electric pump for operating the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb hatch, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding hopper” Complete radio remote control Fgjdpfsyu Snuex Acdof Large lateral GRP service doors Service-friendly engine compartment with LED light Hydraulically reversible fan Loading protection on both sides Fire extinguisher Service ladder Toolbox Audible start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Additional equipment: 500 mm track undercarriage unit, flat Watering system with hopper extension H=300 mm on both sides Shredding system Size "L" -VARIOMAT (Variomat system L600/4 - 42 teeth) Rear conveyor length 7 m, 1,200 mm wide Size "L" - "Limiter" (20 pieces) LED light package, engine compartment and rear Central lubrication with pump Delivery date by arrangement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, SCHUKO, tip VALIDUS 160-2330/25/207/BK Letnik proizvodnje: 2017, Pretok zraka: pribl. 80.000 m³/h Fjdpezrk T Njfx Acdsgf Površina filtrov: pribl. 207 m²

Stanje: rabljeno, Flexible milling cell with 6-axis ABB industrial robot - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary table changer featuring 2 workstations, robot cell Serial No. 24-51541 Year of construction: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 Controller: ABB model IRC5 with Tech-In panel High-frequency milling spindle PERSKE model KRS 35.3-2, output 1.2 kW, speed 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight (net): 380 kg Table size (Table 1) with aluminum top: 500 x 500 mm Table size (Table 2) with Pertinax top: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The entire system is designed as a compact milling cell with a rotary table - Switch cabinet and robot control cabinet all mounted compactly on the milling cell Fgodpfx Acjyaq Nujdjf - Motorized rotary indexing table (presumably WEISS make) with fixed indexing step = 2 stations = 180° - Rotary table, 180° rotation angle, with partition wall and two clamping surfaces for fixtures - While the milling cycle is running, one side of the rotary table can be loaded with new workpieces - Front safety guard with light curtain for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Approximate weight of milling cell: 4,000 kg Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge finishing, milling cut-outs, drilling, etc. Also suitable for machining plastics or similar materials. If interested, please request a video from us.

Stanje: rabljeno, Booklet Maker Duplo System 5000 Year of Manufacture: 2008 - Serial No.: 080100007 Counter: 7,600 folds/stitches System consists of: Air Suction Collator DC-10/60 - 2 x 10 Station Feeders Paper size: min. 120mm x 148mm - max. 350mm x 500mm Paper weight: 40-300g/m² Infeed height per station: 60mm Maximum speed: 5,000 products/hour Booklet Maker DBM 500 Stitching and folding Paper size: min. 120 x 170mm; max. 350 x 500mm 2 Universal Stitching Heads Hohner 48/5S Pressing Station DBM 500-P Fgjdpfx Acexdfblsdjf Trimmer DBM 500T Delivery Band DBM-LS Bridge/Lifting Unit LUL-HM Including Rietschle Compressor Online video inspection via WhatsApp, MS Teams, Zoom, or Telegram. Located in Emskirchen/Nürnberg - Immediately Available - Test Runs Possible.

Stanje: rabljeno, Schmedt PRÄDRY je razširljiv sušilnik za knjižne bloke lepljene vezave (perfect bound). Infrardeča sušilna naprava Schmedt PräDry HHS 12: PRÄDRY je razširljiv sušilnik za knjižne bloke lepljene vezave. Tristopenjski infrardeči oddajnik (650, 850 in 1.500 W) omogoča hitro in nežno sušenje. Spletni video ogled preko WhatsApp – MS Zoom – Telegram. Na zalogi v Emskirchen/Nürnberg – Na voljo takoj – Možnost testiranja. Fedpfxjxp H S Ao Acdogf

Stanje: rabljeno, Etiketirni stroj ETMA EM 01 Leto izdelave: 1993 Prehodna širina: 200 mm Natančnost zaustavitve: +/- 0,5 mm Minimalna dolžina etikete: 10 mm Fedexnb E Iepfx Acdogf Minimalna širina etikete: 10 mm Spletni video ogled prek WhatsApp - MS Zoom - Telegram Na zalogi v Emskirchen/Nürnberg - Na voljo takoj - Možnost preizkusa

Stanje: zelo dobro (rabljeno), CNC flexible system for drilling and dowel insertion. Machine control: BECKHOFF Consisting of: A) Plate storage ‘Igel’ for loading B) 1st pass-through CNC, model BAT-DTW C) 2nd pass-through CNC, model BAT-DTW D) 3rd pass-through CNC, model BAT-DTW E) 4th pass-through CNC, model BMA-DLS, for drilling, assembly, glue application, and insertion F) Conveyor technology G) Buffer section and RW feed automation, model RWA/RWZ-CNC H) Feeding and turning unit, ZWA-1-CNC I) Body press, model KP-3-CNC Fsdem Uyngjpfx Acdogf L) Conveyor technology / final assembly

Stanje: rabljeno, številka stroja/vozila: 45208, Marking device for folding machine - Stahl MKE 86, Serial No. 29903/86 - 115148 Online video inspection via Skype video We would be very pleased to welcome you for a visit – more machines available in stock. Available immediately – viewing possible Fgedpfjh Ax Rbex Acdsf In stock in Emskirchen / Nuremberg – test runs can be performed

Stanje: rabljeno, Leto izdelave: 1986, številka stroja/vozila: 29903, Marking device for folding machine - Stahl MKE 86, year of manufacture 1986, serial no. 29903/86 - 115148 Maximum working width: 860 mm Equipped with marking unit Online video inspection possible via Skype video We would be pleased to welcome your visit – additional machines in stock Available immediately – ready for inspection In stock at Emskirchen / Nuremberg – Can be tested Fsdpfx Ash Ax Rfjcdjgf

Stanje: potreben popravila (rabljeno), Prodajamo večje število motorjev in generatorjev za kogeneracijske sisteme (BHKW). Generatorji delujejo normalno. Motorji potrebujejo popravilo. Gre za motorje GM V8 in generatorje ABB z močjo 45 kW. Fgsdpfxezlf N Ee Acdsf Skupno je na voljo 4 motorje in 3 generatorje.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2022, obratovalne ure: 8.000 h, Prodajamo motor MAN E3262 E302. Žal je motor poškodovan zaradi požara. Oljna posoda je počena. Cena je podlaga za pogajanja. Notranje stanje je bilo do požara zelo dobro. Fgedpfszlf Disx Acdef

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Fodpfxsv Si Sze Acdogf Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, CORMAK MP180 je tlačna kabinska čistilna naprava, zasnovana za učinkovito čiščenje močno umazanih mehanskih, kovinskih in industrijskih komponent. Kombinacija visokega tlaka, segrevanja čistilnega sredstva in konstrukcije iz nerjavečega jekla zagotavlja visoko učinkovitost čiščenja, vzdržljivost in udobje pri vsakodnevnem delu. Zaprt cikel čistilne tekočine omogoča ekonomično uporabo čistilnega sredstva, možnost segrevanja tekočine do 70 °C pa povečuje učinkovitost odstranjevanja trdovratnih nečistoč, kot so olja, masti, umazanija in obloge. Čistilna naprava MP180 je zasnovana za profesionalne delavnice, servise in industrijska obratovanja, kjer so pomembni natančnost, vzdržljivost in učinkovitost postopka čiščenja. Glavne prednosti kabinske čistilne naprave MP180 Čiščenje v zaprtem ciklusu s segrevanjem tekočine – učinkovito odstranjevanje trdovratnih nečistoč zaradi delovne temperature do 70 °C. Visok delovni tlak do 8 bar – omogoča temeljito čiščenje težko dostopnih površin in močno umazanih delov. Konstrukcija iz nerjavečega jekla – zagotavlja visoko odpornost proti koroziji, vlagi in intenzivni uporabi. Dvofunkcijska čistilna pištola – omogoča delo samo s stisnjenim zrakom ali z mešanico zraka in tekočine, kot tudi sušenje komponent po končanem čiščenju. Nastavljive nogice za izravnavo – omogočajo stabilno postavitev naprave tudi na neravni podlagi. Koncentrat za čiščenje delov je vključen v paket Z napravo MP180 prejmete 2 litra koncentrata za delavniške čistilne naprave. Pri pripravi raztopine s 10-odstotno koncentracijo lahko pridobite do 20 litrov pripravljene delovne tekočine. Najboljši učinki čiščenja se dosežejo pri uporabi vodne raztopine s temperaturo od 40 do 70 °C. Priporočeno koncentracijo je treba izbrati glede na vrsto površine, naravo nečistoče in uporabljeno metodo čiščenja. Priporočena koncentracija raztopine Fgjdpfx Aceztwa Sodef kopel v raztopini: 5–10 %, čiščenje z nizkim tlakom: 2–10 %, čiščenje z visokim tlakom: 2–5 %, pH koncentrata: 12,8. Konstrukcija in tehnologija čistilne naprave MP180 Čistilna naprava za dele MP180 je opremljena z prostorno delovno komoro in sistemom za segrevanje čistilnega sredstva. Povečana temperatura tekočine poveča učinkovitost postopka čiščenja in pomaga pri hitrejšem odstranjevanju trdovratnih nečistoč. Robustna konstrukcija iz nerjavečega jekla zagotavlja visoko odpornost proti vlagi, nečistočam in zahtevnim delovnim pogojem. Zahvaljujoč temu je naprava primerna za redno uporabo v delavnicah, servisih in industrijskih obratih. Tlačna pištola omogoča natančno usmerjanje curka na čiščeni del. Možnost delovanja samo s stisnjenim zrakom omogoča tudi prepihovanje in sušenje očiščenih delov. Standardna oprema dvofunkcijska pištola – zrak / tekočina + zrak, sistem za segrevanje čistilne tekočine, delovna komora s prostornino 180 l, konstrukcija iz nerjavečega jekla, nastavljive nogice za izravnavo, 2 litra koncentrata za delavniške čistilne naprave. Tehnični podatki Prostornina čistilne naprave: 180 l Napetost: 230 V Frekvenca: 50 Hz Masa: 56 kg Višina z nogami: 1450 mm Višina brez nog: 920 mm Notranja širina: 740 mm Notranja višina do odprte pokrovke: 410 mm Notranja globina: 500 mm Višina nakladanja: 360 mm Širina nakladanja: 700 mm

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, moč: 45 kW (61,18 KM), Ponujamo kompletno napravo za napenjanje z dodatno opremo za dovajanje materiala. Po dodatnem plačilu lahko kupite tudi premično dno. Fgodpfezldbgox Acdef Naprava je že razstavljena in se nahaja v Južni Tirolski. Dostava ni problem.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Naprodaj je sistem za kemično obdelavo z uporabo kopeli s soljo, vključno z žerjavom in sesalnim sistemom ter raznim dodatnim opremi. Sistem za kemično obdelavo je bil izdelan lastnoročno in ima ustrezno odobritev, vendar nima oznake CE. Dimenzije posode: dolžina: 990 mm, širina: 490 mm, višina: 680 mm Sestavljen iz 6 posod. Celotne dimenzije: dolžina: 4,70 m, širina: 1,40 m, višina: 0,95 m Žerjav in sesalni sistem sta vključena v ceno. + 6 dodatnih grelnih palic. Fgodezkf E Ropfx Acdsf Demontažo in prevzem izvede kupec sam! Ogled je mogoč po predhodnem dogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.900 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 16.000 kg, moč: 308 kW (418,76 KM), Willibald MZA 3500/ drobilnik/ sekljalnik/ stroj za mletje • Proizvajalec: Willibald • Tip: MZA 3500 • Leto izdelave: 2000 • Delovne ure: 10.900 h • Motor: MAN D 2876, 6-valjni dizel • Moč: 308 kW / 418 KM • Prehod: 500 mm • Število osi: 2 tandem • Zavorni sistem: zračne zavore • Število kladiv: 48 • Hitrost rotorja: 1.300 min⁻¹ • Vlečna kljuka: 40 mm • Vlaknenje organskega materiala za kompostiranje do premera 30 cm Fedpfx Aozdtzmecdjgf • Drobljenje starega, odpadnega lesa do premera 30 cm • Skupna masa: 16.000 kg • Nemški stroj • Takoj pripravljen za uporabo • Ta ponudba je nezavezujoča in prosta sprememb. - Vmesna prodaja pridržana, - Možne so napake in tiskarske napake. - Prodaja po naših splošnih pogojih poslovanja.

Stanje: dober (rabljeno), nosilnost: 3.000 kg, Protec Reiss varilni vrtljivi pripomoček, opcijsko z mizno ploščo z luknjami, velikost po želji 360° rotacija Fgsdpfx Acoziyh Dedjf Nastavitev osi po želji Uporaba možna brez mizne plošče z luknjami za lastne dele strank ali z mizno ploščo Višina mize zgornji rob 1,16 m Na zalogi imamo več takšnih vrtljivih naprav Doplačilo za novo mizno ploščo z luknjami 2.600 € (2,0 x 1,0 x 0,2 m)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Naprava za rezanje z vročo žico. Fedpfxeznli Dj Acdogf Proizvajalec: MANZ, krmiljenje SPS, zaslon na dotik Siemens.

Stanje: rabljeno, številka stroja/vozila: 008399, Največja obdelovalna širina: 1350 mm Fedpfx Acoy I Tm Hedogf Delovna miza: fiksna višina Število delovnih enot: 4 kos

Stanje: rabljeno, številka stroja/vozila: 007613, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 3 mm Delovna miza: nastavljiva Vakuumski tepih: da Število delovnih agregatov: 3 kos. Fgodpfox A Tagex Acdsf

Stanje: rabljeno, številka stroja/vozila: 005687, Maximum panel width: 3200 mm Maximum panel length: 1200 mm System for 180-degree tilting of the panel: yes Fodpfx Aoktdtpscdsgf

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, MBM ASAS ME Naprava za odstranjevanje blata za stroj za rezanje z vodnim curkom Rabljeno, letnik 2012 Fjdozh U Naepfx Acdjgf

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Millipore Milli-Q pure water system IQ 7000. Fgjdswutuqspfx Acdof Without cartridges. Includes MilliQ Q-Pod. Unused. Including functional warranty.