Demag Kranbahn Kbk2 500Kg 10X7M Zub Žerjav Nadstrešek Žerjav Notranji Žerjav Žerjavska Steza nakup rabljenega (12.201)

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Clamping force: 2000 kN, holding force: 2200 kN, max. opening stroke: 570 mm, min. mould installation height: 310 mm, max. mould installation height: 660 mm, max. distance between platen faces: 1230 mm, platen dimensions: 830 x 830 mm, clear tie bar distance: 560 x 560 mm, max. mould weight: 3.3 t, max. weight on moving platen: 1.7 t, max. weight on fixed platen: 2.5 t, ejector stroke: 180 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 45 mm, L/D ratio: 20, injection pressure at 400°C: 2402 bar, shot volume: 358 cm³, shot weight (PS): 330 g, max. dosing stroke: 225 mm, max. nozzle stroke: 400 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 80 kN, installed cylinder heating: 13 kW, material hopper capacity: 70 l, oil tank capacity: 500 l, screw drive: 32 kW, clamping unit drive: 32 kW, pump unit power: 15 kW, total installed power: 92 kW, continuous sound pressure level: 74 dB(A), length: 5700 mm, width: 1700 mm, height: 2200 mm, weight: 11 t, SPS operating hours: 36,734 h, cylinder heating: 25,665 h, pump: 18,222 h, documentation available. An on-site inspection is possible. A Wittmann robot cell is optionally available. Hodpfxjy Tx Rbe Af Ten

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Clamping force: 3000 kN, holding force: 3300 kN, max. opening stroke: 670 mm, min. mould installation height: 330 mm, max. mould installation height: 710 mm, max. distance between platen surfaces: 1380 mm, platen size: 1040 x 950 mm, clear column spacing: 720 x 650 mm, max. mould weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2426 bar, shot volume: 530 cm³, shot weight (PS): 480 g, max. dosing stroke: 270 mm, max. nozzle stroke: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed cylinder heating: 14.8 kW, material hopper volume: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric drive clamping unit: 37 kW, pump aggregate power: 22 kW, installed total power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6500 mm, width: 2000 mm, height: 2300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, cylinder heating: 35,656 h, pump: 27,922 h, documentation available. An on-site inspection is possible. Hedpfx Ajy Tx Rnjf Ton

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18616 Manufacturer: DEMAG Model: IntElect 80/370-100 NC4 Year of manufacture: 2007 Clamping Unit Clamping force: 80 t Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4,750 kg Additional information: Technology that sets new standards in energy efficiency: Lower power consumption, higher precision The Demag IntElect series pioneered the introduction of fully electric drive technology to the plastics injection molding sector in the late 2000s. In contrast to conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is only activated when movement is actually required. This fundamental difference provides energy savings of 50–70% compared to hydraulic machines, significantly reducing annual operating costs. Hodpfx Ajzabkvef Tsn Motor system — Siemens MOTICS 3 Main drive motor: water-cooled servo motor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor: water-cooled servo motor Based on the same Siemens MOTICS 3 platform, this motor ensures homogeneous material melt through precise speed and torque control; the water-cooled design enables stable operation during continuous high-volume production. 5-axis fully servo-controlled system The machine features five independent servo motors. Clamping, injection, screw retraction, ejection, and plasticizing are all fully servo-controlled. Because each axis can be programmed independently, all movements can be performed simultaneously. This architecture delivers repeatedly precise, micrometer-level accuracy, reduced cycle times, and minimal mechanical wear compared to hydraulic configurations. NC4 control system The keypad-based NC4 control system manages all machine parameters—including injection profile, mold protection, and cycle analysis—via a single display.

Stanje: rabljeno, Leto izdelave: 2003, (1) Stroj za brizganje plastike, Ravnanje: Sepro Robotique | Success 7 | 2016 Nadzor temperature: HB Therm | Razno: 1x Zaščitni ohišje 1x Transportni trak, podjetje RAU Maschinenbau 1x Regulator vročih kanalov 1x Transportni trak, podjetje SAS Grillet Hjdpfx Aey N R U Rjf Tsn 1x Transportna enota, podjetje Motan Tehnične podrobnosti: Velikost stroja: 500/370-200 Napajanje: 3/N/PE AC 400 V Frekvenca (Hz): 50 Tok (A): 94 Teža (t): 3,3 Tlak (bar): 210 Pretok (l/min): 130

Stanje: rabljeno, Leto izdelave: 2000, (1) Brizgalni stroj, rokovanje: Wittmann | WX142-0325 | 2023 Razno: 1x zaščitni pokrov 1x rokovalni sistem, podjetje Wittmann, serija 9 1x transportni trak z možnostjo menjave zabojev 1x V2A drč za izmet 1x Euromap 12/67 predelava 1x zunanji sistem vročih kanalov, podjetje Mold Masters M1-06-12 (leto izdelave 2016), 12 con 1x transportna enota, podjetje Motan Hsdpoy N R Uqsfx Af Ten Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 196 Tok 2 (A): 110 Tok 3 (A): 86 Tok 4 (A): 67 Teža (t): 9,7 Tlak (bar): 190 Pretok (l/min): 190

Stanje: rabljeno, Leto izdelave: 2014, (1) Stroj za brizganje, Ravnanje: Sepro Robotique | Success 22 | 2016 Kontrola temperature: GWK Razno: 1x zaščitni pokrov 1x transportni trak, 1x transportna enota, podjetje Somos FG 204; leto izdelave 2022 Tehnične podrobnosti: Sila zapiranja (kN): 2100 Razmak veznih stebrov (mm): 580 Brizgalna enota: 430 Napajanje: 3/400 V Frekvenca (Hz): 50 Tok 1 (A): 175 Tok 2 (A): 116 Tok 3 (A): 59 Teža (t): 8,93 Hedjy N R R Eepfx Af Tjn Tlak (bar): 190

Stanje: rabljeno, Leto izdelave: 2003, (1) Brizgalni stroj, Ravnanje: Wittmann | W621 | 2003 Nadzor temperature: HB Therm | HB-100 Z1 | 2013 Razno: 1x Zaščitni ohišje 1x Transportni trak 1x Krmilnik vročih kanalov, podjetje Mold Masters, 1x Transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Hodpsy N R Iqjfx Af Ton Frekvenca (Hz): 50 Tok 1 (A): 189 Tok 2 (A): 152 Tok 3 (A): 37 Teža (t): 10,1 Tlak (bar): 190 Pretok (l/min): 206

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Hydraulic injection moulding machine from 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mould height of 1530 mm. It is equipped with a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking for a high-quality injection moulding machine, you should consider the DEMAG 420/810 - 2300 we are offering for sale. Please contact us for further details. • Tie bar distance (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mould height: 820 mm • Max. mould height: 1530 mm • Max. daylight between platens: 1530 mm • Max. weight of the moving mould half: 2200 kg • Diameter/height of the centring ring: 160 × 15 • Sprue bush radius: R19 • Diameter of the ejector coupling thread: M24 • Shot volume: 1090 cm³ • Hot runner zones: 8 • Air cascade (quantity): 6 • Cascade hydraulics (quantity): 6 • Hydraulic core pulls: 2 • Oil fill capacity: 730 • Power supply: 217 A • Connected load: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002 Hedpfx Afey Nyflo Ton

Stanje: zelo dobro (rabljeno), nosilnost: 5.000 kg, DEMAG P-Zug Hsdjy Swb Aopfx Af Tsn Nosilnost 5 t Hod poti kavlja 5,5 metra 2 hitrosti dviga: 4/0,4 m/min Električni voziček Zelo dobro ohranjen, uporabljen le občasno.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 2.000 mm, nosilnost: 1.500 kg, Prodam vrtljiv žerjav z verižnim vitlom Demag, višina stebra je 286 cm, dolžina roke od vrtljivega čepa 320 cm. Hedpfxsymv T Se Af Ton

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech 80-310 Compact Schließkraft: 80 Tonnen Baujahr: 1995 Holmenabstand: 400 x 400 mm Schneckendurchmesser: 40 mm Schussgewicht: 196 g Hedswav Htjpfx Af Tjn

Stanje: rabljeno, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase linear-rotor motor DEMAG Type: KBA 125 B Motor no. 3926599 Speed: 915 rpm Motor power: 4.7 kW Mains connection: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement in direct drive 1 unit three-phase linear-rotor motor DEMAG Type: KBA 80 A Motor no. 3926599 Speed: 1360 rpm Motor power: 0.83 kW Mains connection: 400 Volt, 50 Hz - Brake disconnects via armature thrust movement when driving - When stationary, the brake operates via the reduction gearbox on the motor - Output speed via the gearbox: 174 rpm Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no. 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor rotor: Ø 32 mm Shaft stub length: 80 mm Hsdey N D E Ajpfx Af Tjn Pilot diameter on motor: Ø 125 mm Bolt circle diameter on motor: Ø 150 mm / 4xM12 internal thread Dimensions LxWxH: 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Stanje: rabljeno, Leto izdelave: 1978, Doseg 5.500 mm Nosilnost 250 kg Višina 3.800 mm Dvižna višina 3.800 mm Hsdsyqvlijpfx Af Ten Številka žerjava 1.30 Tehnični podatki so podatki proizvajalca ali upravljavca in so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; izključno veljajo naše poslovne in prodajne pogoje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna zmogljivost 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: zelo dobro (rabljeno), DEMAG verižni dvigalo Tip PK 2 N-F Dvižne hitrosti: 10 in 2,5 m/min Hedpfx Afsy Sldlj Tsn 380 V 0,5 kW Pogon vozička: 380 V 0,5 kW

Stanje: novo, 5x5 m Storage Platform, Load Capacity: 500 kg/sqm, Underside Height: 2.5 m, approx. 25 sqm Modular Mezzanine Floor Specifications: - Length: approx. 5 m - Width: approx. 5 m - Underside of platform: approx. 2.5 m - Top edge of platform: approx. 2.88 m - Total surface area: approx. 25 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm particle board P6, natural finish on top, white underneath - Support grid: 5.0 m x 5.0 m - NO CROSS BRACING, reinforcement via tie beam - New from factory, plus freight costs depending on postal code Scope of delivery: - 02 x C profile 5000 mm, sendzimir galvanized - 08 x S profile 4800 mm, sendzimir galvanized - 04 x Support post 2500 mm, RAL 7016 - 03 x Tie beam 2517 mm, RAL 7016 - 12 x Particle board 2400 x 1000 x 38 mm natural/white P6 - 04 x Base plates for columns - 04 x Anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL GLADLY PROVIDE YOU WITH A NON-BINDING QUOTE, TAILORED TO YOUR REQUIREMENTS. Price: Hsdpfx Afey U Ua Ue Tjn €4,988 net plus legally applicable VAT You will receive an invoice stating VAT separately. Optional on request: - Impact protection - Handrail - Transfer station - Stairs - Floor anchors - Steel structure can be coated in your desired RAL colour (standard RAL 7016) Transport: Delivery is available on request through our partner forwarding company. Costs depend on postal code. Installation: Our trained staff are available to professionally assemble and disassemble your facility on request. Our recommendation: Let us know your requirements... We are happy to assist you with your project — from planning to ordering to installation.

Stanje: novo, 10x10m mezzanine platform, load capacity: 500kg/sqm, clearance height: 2.5m, approx. 100sqm modular storage platform Technical Data: - Length: approx. 10m - Width: approx. 10m - Clearance height (underside of platform): approx. 2.5m - Top edge of platform: approx. 2.88m - Total area: approx. 100 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard P6, natural finish on top, white on bottom - Support grid: 5.0m x 5.0m - NO CROSS BRACING, reinforced with purlin - New, ex-works, plus freight dependent on postal code Scope of delivery: - 08 x C-profile 5000 mm, Sendzimir galvanized - 28 x S-profile 4800 mm, Sendzimir galvanized - 09 x column 2500 mm, RAL 7016 - 03 x purlin 2517 mm, RAL 7016 - 47 x chipboard panel 2400 x 1000 x 38 mm, natural/white, P6 - 09 x base plates for columns - 09 x anchor bolt sets for columns Our planning department will gladly provide you with a non-binding, customized quote according to your requirements. Price: €12,904 net Plus VAT at the current legal rate. You will receive an invoice showing VAT separately. Optional on request: - Collision protection - Guardrail Hedpfx Aoy U Ua Ijf Ton - Goods transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in your preferred RAL colour (Standard RAL 7016) Shipping: Delivery can be arranged through one of our partner forwarding agents on request. Shipping costs depend on your postal code. Assembly: Our trained personnel are available to assist you with the professional installation and dismantling of your warehouse equipment if required. Our recommendation: Let us know your requirements ... We are happy to assist you with your projects, from planning and ordering through to assembly.

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Pogon: kolesni Lastna teža: 22.000 kg Hodpfx Afowwqbyo Tjn Dvižna zmogljivost: 30.000 kg Dimenzije tovornega prostora: 830 x 240 x 345 cm Serijska številka: 86584 Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Za dodatne informacije se obrnite na skupino PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Namen uporabe: Gradbeništvo Pogon: Kolesa Lastna teža: 48.000 kg Dvižna zmogljivost: 220.000 kg Serijska številka: 82609 Stanje prednjih pnevmatik: 90 Stanje zadnjih pnevmatik: 90 Hodpewk T Uijfx Af Tjn Transportne mere (D x Š x V): 15,3x3x4 Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information. Hodpfswk Aw Hox Af Ton

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Hedpey Ub D Tofx Af Ten Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information & extras Core pull: 1 pc. Additional information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, fully electric injection moulding machines developed specifically for technical plastic components, automotive applications, electronic parts, and demanding serial production. All main machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector functions are performed entirely electrically, allowing for highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. At the same time, the low heat generation reduces the cooling requirement and lowers overall operating costs. The machine features a direct servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticising and stable process conditions, especially with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision components * Suitable for fast serial production Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains among the most sought-after fully electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 ton Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Hedpfx Afjy Ub D He Ton Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components, and demanding mass production requirements. All major movements of the machine are driven by direct-drive servo-electric motors. Injection, dosing, mould movements, as well as ejector functions are fully electric, providing the highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the reduced heat generation lowers the cooling requirements and further reduces overall operating costs. The machine is equipped with a direct servo injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features 4 heating zones to ensure homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance effort * Clean production environment * Ideal solution for technical and precision parts * Suitable for rapid mass production Thanks to its long service life, consistent production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market even today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18620 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2180 bar Dimensions and Weight Dimensions (L x W x H): 4.8 x 1.4 x 2.2 m Machine weight: 5500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components as well as demanding high-volume production. All main movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements and ejector functions are fully electric, thus providing maximum precision, excellent repeatability and outstanding process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on application. Low heat generation also reduces cooling requirements and lowers overall operating costs. This machine is equipped with a direct servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit features 4 heating zones to ensure homogeneous plasticising and stable process conditions, particularly for technical plastics. Key Advantages of the IntElect Series: * Fully electric direct-drive servo technology * Very low energy consumption Hsdpfx Asy Ub Dyef Tjn * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast serial production Thanks to its long service life, stable production output and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight PS: 76 g Injection pressure: 2180 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, all-electric injection moulding machines designed specifically for technical plastic parts, automotive applications, electronic components, and demanding series production. All main movements of the machine are driven by direct-drive servo electric motors. Injection, dosing, mould movements, and ejection functions are fully electric, enabling maximum precision, outstanding repeatability, and optimal process stability. The IntElect series is particularly known for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% to 80% can be achieved, depending on the application. At the same time, minimal heat generation reduces cooling requirements and thus overall operating costs. The machine features a direct servo injection and dosing system, which allows for extremely fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous melt plasticisation and stable process conditions, especially for technical polymers. Hodpoy Ub Dtjfx Af Ten Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low noise and vibration levels * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed series production Due to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2012, Ref. No.: 18610 Manufacturer: DEMAG Model: IntElect 160/520-340 NC5 Year of manufacture: 2012 Clamping Unit Clamping force: 160 t Opening stroke: 495 mm Tie bar spacing (h x v): 520 x 520 mm Minimum mould height: 275 mm Maximum mould height: 585 mm Hodpjy Ub Dmofx Af Ten Platen size (h x v): 760 x 785 mm Injection Unit Screw diameter: 35 mm Shot volume: 156 cm³ Shot weight PS: 139 g Injection pressure: 2180 bar Dimensions and Weights Dimensions (LxWxH): 5.4 x 1.5 x 2.1 m Machine weight: 7600 kg Additional Information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, fully electric injection moulding machines developed specifically for technical plastic parts, automotive applications, electronic components, and demanding high-volume production environments. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements and ejector functions are performed entirely electrically, delivering maximum precision, outstanding repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and its high production accuracy. Depending on the application, energy savings of approximately 60% up to 80% can be achieved compared to conventional hydraulic injection moulding machines. At the same time, lower heat generation reduces cooling requirements and cuts overall operating costs. The machine features a direct servo-driven injection and dosing system which provides very fast response times and highly accurate injection control. The injection unit is equipped with four heating zones, ensuring a homogeneous melt and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume productions Thanks to its long service life, stable production performance and outstanding energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Concept 125/475-320 Zatezna sila: 125 ton 2 x izvleki jedra na premičnih ploščah Hsdpfexd Sz Esx Af Ton + Robot Demag W621-1831: X-550, Y-1000, Z-2000 (2004)