Demag Električno Dvižno Vrv 1125 Kg nakup rabljenega (69.704)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, nosilnost: 250 kg, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! TEHNIČNI PODATKI Nosilnost: 250 kg Dolžina portala: 1.300 mm PODROBNOSTI O STROJU Mere in teža Dimenzije (D x Š x V): 1.700 x 1.300 x 3.500 mm Teža: 350 kg Zunanja referenca: 27 Ppjdpfxsy D Tdds Agxsr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Ppjdpfx Ageyz Af Eoxor Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Tlak zraka: 9 bar Zračni pretok: 28 m³/min Nazivna moč motorja: 260 kW Obratovalne ure: 36.170 h Električna napetost: 400 V Električna frekvenca: 50 Hz Najv. delovna temperatura: 65 °C Hladilno sredstvo: 407C 7,5 kg PODATKI O STROJU Model stroja: DEMAG MARATHON 301 Tip: MA301/9AS Serijska številka: 50557900 Letnik izdelave: 1994 Model stroja: SUŠILEC ZRAKA PARKER HIROSS POLESTAR SMART Tip: PST460 Serijska številka: 398037030001 Letnik izdelave: Moč motorja: 6,26 kW Pedpfx Aoy Iapnogxepr Teža: 525 kg OPREMA *Na voljo dodatni sistemi

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Ppsdpfx Ajhx Elfjgxor Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical Data: Max. clamping force: 3,500 kN Max. holding force: 3,850 kN Opening stroke: 725 mm Min. mould installation height: 400 mm Max. mould installation height: 900 mm (extended) Clamping platen (h x v): 1,168 x 1,144 mm Clear tie bar spacing (W x H): 830 x 830 mm Max. mould weight: 6,600 kg Max. weight on moving clamping platen: 3,800 kg Max. weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure control during dosing stroke programmable Installed cylinder heater: 23.1 kW Material hopper capacity: 110 l Weight: approx. 21 t Podjy Hmfyepfx Agxepr Options/accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C-) axis pneumatic 0° - 90°, incl. quick changer Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle, without mixing element and non-return valve; • The plasticizing cylinder must not be used for continuous compact injection moulding; • Interface (communication, emergency stop interface); • Software with function display pages for control of the MuCell function; • Adapted nozzle area safety guard; • High speed, position-controlled screw (analogous to ZE388) Conveyor belt: Width: 870 mm Effective width: 800 mm Length: 3,500 mm Height: 880 – 1,220 mm Capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Tunnel clear height: 500 mm This injection moulding machine is fully equipped!! Condition: As new, only 5,290 operating hours

Stanje: pripravljen za uporabo (rabljen), Approx. 120 units = 480 linear meters of safety conductor lines Number of conductors/poles: 5 Standard length: 4 m Conductor rail cross-section: 10 mm² Podpfxod Hurbe Agxopr For mains voltage up to: 500 V Continuous duty current rating (100% duty cycle): 60 A Weight per meter: 2.1 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Ppedeu Tha Iepfx Agxjr Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Ppedpfx Agou Thh Esxsr Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Pjdsx A U Ncopfx Agxspr Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Schließkraft: 100 t Öffnung max: 500 mm Formenhöhe: 250 mm Plattengröße: 590x600 mm Abstand zwischen den Säulen V: 420 mm Abstand zwischen den Säulen H: 420 mm Typ: Horizontal Antrieb: Hydraulisch Schneckendurchmesser: 30 mm Einspritzgewicht: 103 g Einspritzvolumen: 115 cm³ Einspritzdruck: 2755 Zusatzausstattung: Pjdsx Tdwyopfx Agxspr 1. 2 hydraulische Kernzugkreise an der beweglichen Aufspannplatte (Proportionalventile) 2. Zusätzliche Anschlüsse für 2 Kernzüge an der festen Aufspannplatte 3. Pneumatischer Kernzug (2 Kreise) an der beweglichen Aufspannplatte 4. 4-Zonen-Kühlwasserdurchflussregler mit Temperaturanzeige 5. Druckluftblasventile an der festen und beweglichen Aufspannplatte (programmierbar) 6. Integrierte Heißkanalregelung, 8 Zonen 7. Schnittstellen für externe Düsenheizbänder 8. Schnittstelle für integrierte Temperiergeräte (bis zu 6 Kreise) 9. Schnittstelle für Werkzeugtemperaturüberwachung (2 Kreise) 10. EUROMAP 67 für Automatisierungsgeräte

Stanje: zelo dobro (rabljeno), Mostno dvigalo, dvoransko dvigalo, kolutna zavora, žerjavna zavora, kolutne, bobenske in nevihtne zavore, zavora mostnega dvigala, zavorni obroč, stožčasti zavorni kolut Podpfx Aexc Eupogxepr -Proizvajalec: Demag, zavorni obroč s stožčastim zavorni kolutom neuporabljen -Tip: 628 626 44 RIW -Dimenzije: glej fotografije -Mere: Ø 310 x 40 mm -Teža: 0,9 kg

Stanje: zelo dobro (rabljeno), Tehnološki modul za brizganje: Psdjqxdnlspfx Agxopr TX DIAS RX DIAS PLUS..... 2 kom. krmilne kartice Demag

Stanje: rabljeno, Ugodno zaradi prenehanja obratovanja Ppjdjyyarmjpfx Agxjr

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: dizel, skupna masa: 550 kg, največja dovoljena obremenitev: 500 kg, stanje verige: 100 odstotek, Leto izdelave: 2025, Oprema: gumene gosenice, hidravlika, Track Dumper 500S The Professional Lift Dumper for Maximum Efficiency on the Construction Site The Track Dumper 500S delivers powerful material transport, precise unloading, and reliable engineering. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct unloading into containers, trailers, or raised loading platforms – efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust design, the Track Dumper 500S is perfect for confined construction sites, rough terrain, and professional continuous operation. Your Advantages: - Hydraulic lift and tilt function (90°) for convenient unloading - Lifting height up to 1,200 mm – ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimal traction from wide crawler undercarriage - Durable, low-maintenance, and robust construction - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Operating weight: 550 kg Payload: 500 kg Skip volume: 200 l Podpfjyml D Hox Agxopr Skip dimensions: 1,050 × 730 × 730 mm Lifting & Dumping Function: Max. lift height: up to 1,200 mm Dump height: 1,050 mm Dump reach: 220 mm Dump angle: 90° Operation: hydraulic Undercarriage: Type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Gradeability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Track Dumper 500S impresses wherever reliability, maneuverability, and lifting capacity are required: - Structural and civil engineering - Landscaping and gardening - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Inspection by appointment possible Save now – better price possible! Take advantage of our attractive offers. Enquiries are worthwhile!

Stanje: generalkompletno obnovljen (rabljeno), Gebrauchte K + G Wetter WW 130 mm Winkelwolf ist ein zuverlässiges und langlebiges Gerät, das sowohl zum Verarbeiten von frischen als auch leicht gefrorenen Produkten konzipiert wurde. Ideal für kleine und mittelgroße Produktionsbetriebe. Komplett aus Edelstahl gefertigt, was höchste Arbeitshygiene und einfache Wartung garantiert. Ausgestattet mit zwei Leistungsstufen: 11/19 kW Lochscheiben: 2, 3, 5, 8, 10, 12 mm Psdpfxok Tzwle Agxopr Hersteller: K+G Wetter Modell: WW 130 Höhe: 1950 mm Breite: 1400 mm Länge: 1500 mm Gewicht: 800 kg Fassungsvermögen: 185 l Stromversorgung: 400V 50Hz 3N Gesamtleistung: 11/19 kW Einfülltrichter-Durchmesser: 130 mm

Stanje: zelo dobro (rabljeno), DEMAG pogonski motor 36/20 K6P za električni žični vitel P1600. Po želji z zobniško sklopko in zavorno ploščo. Tip 36/20 K6P, motor v dobrem, preizkušenem stanju. Pjdpfxsv Uai As Agxopr Rotor / sidro / tekalec, pokrovi ležajev, sklopka, zavora tudi posamično. Ohišje P2000, boben za vrv, vodilo za vrv.

Stanje: rabljeno, Demag Ergocontrol IBED NC4 - odstranjen iz Demag Ergotech El-Exis S 60/370-310 - odvzet iz stroja v obratovanju Ppodeyxg Swspfx Agxjr - en pokrov manjka - nima vpliva na funkcionalnost - popolnoma funkcionalen Proizvajalec: Demag Tip: NC4 Št. rezervnega dela: 89380065 Št. proizvajalca: D Če se rezervni del prodaja v postopku izmenjave, sledi delno dobroimetje po prejemu in pregledu poškodovanega dela s strani proizvajalca. Pridržujemo si pravico do zavrnitve dobroimetja glede na stanje oziroma starost vrnjenega dela. Poškodovani del mora biti v stanju, primernem za popravilo, dobroimetje sledi po potrditvi proizvajalca.

Stanje: rabljeno, We are offering a used drive-through scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used Podpfx Agoy Ep Thoxspr PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACTS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment terms will be agreed upon with the order. The price is per unit/net price, or as indicated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveying technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trades. We continuously offer attractive used equipment from a variety of manufacturers/brands at competitive prices. If you have any questions, please feel free to contact us. Four wins – The four success pillars of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Namen uporabe: Gradbeništvo Pogon: Kolesa Lastna teža: 48.000 kg Dvižna zmogljivost: 220.000 kg Serijska številka: 82609 Pedpjwk Aw Hsfx Agxjpr Stanje prednjih pnevmatik: 90 Stanje zadnjih pnevmatik: 90 Transportne mere (D x Š x V): 15,3x3x4 Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 57.628 h, vpenjalna sila: 800 kN, premer vijaka: 35 mm, injekcijska masa: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. With a clamping force of 800 kN and a screw diameter of 35 mm, it is suitable for processing a range of materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann linear robot and a Gravimax 14R gravimetric mixer. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine DEMAG SYSTEC 80/420-310, which we offer for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar spacing: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (PLC): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle count: 5,058,031 • Voltage: 400 V Ppsdpsyyyuusfx Agxsr • Frequency: 50 Hz • Current: 114 A • Maximum pressure (Pmax): 235 bar • Maximum flow rate (Qmax): 104 l/min • Mold installation height: 300 mm • Maximum daylight between platen: 750 mm • Availability: mid-2026 Additional equipment • Wittmann linear robot (handling/robot) • Gravimax 14R gravimetric mixer • TORO Systems material loader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, injekcijska masa: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. Featuring a clamping force of 1500 kN and a screw diameter of 45 mm, it is suitable for processing various materials such as PA, PP, PE, and ABS. The machine offers a maximum pressure of 190 bar and a shot volume of 358 cm³. If you are looking for a high-quality injection moulding machine, we recommend considering the hydraulic DEMAG ERGOTECH 1500-840, which we have available for sale. Contact us for further details. • Shot volume: 358 cm³ • Processed materials: PA, PP, PE, ABS, etc. • Barrel temperature: up to 450 °C • Maximum pressure: 190 bar • Maximum flow rate (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A Psdpjyyyn Uefx Agxjpr • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of manufacture: 1999 • Availability: mid-2026 Additional Equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) – X-stroke: 550 mm – Y-stroke: 1200 mm – Z-stroke: 2000 mm – Weight: 300 kg • Wittmann W633 – Robot no: W633 – X-stroke: 500 mm – Y-stroke: 1400 mm – Z-stroke: 2000 mm – Weight: 475 kg • Wittmann W743 – Robot no: W743 – X-stroke: 1200 mm – Y-stroke: 2000 mm – Z-stroke: 4000 mm – Weight: 835 kg – Connected load: 18 A / 12.5 kVA – Voltage: 400 V

Stanje: rabljeno, DEMAG P625 H13 10t. Psdpfx Agey D I Anjxopr

Stanje: pripravljen za uporabo (rabljen), DEMAG DH2100 H18 - 40t Ppjdpsy D Iwxofx Agxor

Stanje: skoraj kot novo (rabljeno), DEMAG plašč H20 - P1000/1200 Podpfx Agey D Ikrsxspr

Stanje: skoraj kot novo (rabljeno), DEMAG boben H40 - P1000/1200 Podpfx Agoy D Ii Isxopr