Cronosstech Cehp - Tb - 250 nakup rabljenega (11.922)

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 800 t, hod: 800 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description Blodpfxjx N T Nkj Agtjg The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-slider H-frame design ensures balanced distribution of high forces generated during pressing, offering maximum rigidity and long-lasting use. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with the demands of heavy industry in mind. The frame and main load-bearing components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise operation throughout the ram movement. ⚙️ Standard Equipment Steel construction, 8-guide H-type press body Stress-relieved frame by vibration Bronze Zr14 slide bearings TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronically monitored filter contamination warning Display of hydraulic unit oil temperature and system status on screen Cooling system Off-line filtration Two-hand control system Light curtain (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relieving Welding: WPQR and WPS certified, EN ISO 15614-1/2017, accredited by TÜRK-AK (welds are supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø390 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height of Press: 6000 mm Approximate Width of Press: 3350 mm Approximate Depth of Press: 2700 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with high rigidity, developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guideway H-frame structure provides stable and long-lasting operation by evenly distributing the high forces generated during pressing. The CHP 600 model is designed for reliable performance in manufacturing processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty working conditions. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure precise load distribution and high accuracy throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in conformity with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components Bedpjx N T Iaofx Agtslg 📐 Technical Specifications – CHP 600 - Type: Steel construction, H-frame type with 8 guideways - Frame Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 600 Tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Vertical Clearance: 100 mm - Max. Vertical Clearance: 900 mm - Welding Stress Relief: Via vibration - Welding Application: WPQR and WPS accredited by TÜRK-AK, EN ISO 15614-1/2017 certified, supervised by welding coordination engineers certified according to EN ISO 14731 - Max. Operating Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø550 mm – Ck45 - Pot Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Machine Height: 5,900 mm - Approx. Machine Width: 3,250 mm - Approx. Machine Depth: 2,300 mm - Lower Table Height from Floor: 1,400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 28 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 500 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures balanced load distribution during pressing, providing stable and repeatable operation. The CHP 500 model is specifically designed for long-term, reliable performance in heavy-duty production processes that require high tonnage. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty service in mind. The frame and carrier components are stress-relieved by vibration. The Zr14 bronze slide bearings ensure uniform load distribution and long-term precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components via vibration - Zr14 bronze slide bearings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on display - Cooling system - Offline filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guide H-frame press type - Frame Material: St52 – ERDEMIR - Slide Bearings: Zr14 bronze - Capacity (Ram): 500 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5800 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Offline Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 Tons Production Note Bodpjx N T H Asfx Agtjlg This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions designed with high rigidity for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 slide guides ensures that high forces generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 400 model is engineered to deliver long-lasting and reliable performance for heavy-duty applications requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operations. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide even load distribution throughout ram movement, which ensures sustained precision over time. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slide guides - Stress-relieved frame and supporting components by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and produced in accordance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system Blsdpfxex N T Hps Agteg - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration unit - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relief Welding Application: TÜRK-AK accredited WPQR and WPS certified to EN ISO 15614-1/2017 welding practices (certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guided H-frame structure, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium-to-high tonnage production processes. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved via vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution during ram movement, contributing to long-term precision retention. Blodpox N T E Ejfx Agtjg ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved frame and supporting parts - Bronze Zr14 guide bushings - WPQR & WPS approved welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in conformity with CE standards - PLC-controlled hydraulic system - 7'' DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status display - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 300 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress-relieved Welding Procedure: TÜRK-AK accredited and WPQR & WPS certified welding according to EN ISO 15614-1/2017 (supervised by certified welding coordination engineers as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 4400 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7'' Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200 H-Frame Single-Acting Hydraulic Press – 8-Guided General Description Blsdex N T D Uopfx Agtjg The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibratory stress-relieved frame and load-bearing components - Bronze Zr14 slide bearings - WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7") - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration stress relief Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial-grade presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing operations. Thanks to its 8-guide H-frame construction, the press delivers stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-capacity applications, aiming for reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial environments. The frame and load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and long-term stable performance. ⚙️ Standard Equipment: • Steel construction, H-type press body with 8 slide guides • Stress-relieved frame and load-bearing parts (vibration treated) • Bronze Zr14 slide bushings • WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Machine frame designed and manufactured according to CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • Monitoring of hydraulic oil temperature and system status on screen • Cooling system • Off-line filtration Bjdpfox N T Dzjx Agtjlg • Two-hand control system • Light curtain (standard operator safety) • SIEMENS and SCHNEIDER electrical switchgear 📐 Technical Specifications – CHP 150 • Type: Steel construction, 8-guide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bushing: Bronze Zr14 • Capacity (Ram): 150 Tons • Movable Table Dimensions: 800 × 1000 mm • Fixed Table Dimensions: 800 × 1000 mm • Parallelism Tolerance: 120 micron/meter • Squareness Tolerance: 60 micron/meter • Stroke (Ram): 500 mm • Minimum Daylight: 100 mm • Maximum Daylight: 600 mm • Weld Stress Relief: Vibration treated • Welding: WPQR & WPS approved, TÜRK-AK accredited, complies with EN ISO 15614-1:2017 supervised by certified welding coordination engineers (EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 18.5 kW – IE3 • Main Pump: 32 cm³ – REXROTH or PARKER • Movable Table Fast Descent Speed: 150 mm/sec • Movable Table Pressing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø280 mm – Ck45 • Approx. Height: 3650 mm • Approx. Width: 2950 mm • Approx. Depth: 2000 mm • Lower Table Height from Floor: 1250 mm • Pre-fill Valve: NG 100 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Distance Encoder: NOVATECHNIK or TURCK • PLC: DELTA • Touch Panel: DELTA 7” • Switchgear: SIEMENS – SCHNEIDER • Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved via vibration. Bronze Zr14 material is used for the slide bearings, providing long-lasting and stable operation. Key Advantages - 8-guided H-frame structure - Vibration stress-relieved steel construction - Welding applications in compliance with ISO standards - PLC-controlled operation with touch screen interface - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Stress-relieved frame and support components by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured to meet CE standards - PLC-controlled hydraulic system - Touch panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination indicator - Monitoring of hydraulic unit oil temperature and system conditions via display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Ton Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Clear Opening: 100 mm Max. Clear Opening: 600 mm Stress Relief Method: Vibration stress relief Welding Certification: Accredited WPQR and WPS by TÜRK-AK; welding application certificate per EN ISO 15614-1/2017 (monitored by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Bljdpfsx N Tx Sox Agtsg Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), stiskalna sila: 300 t, hod: 200 mm, širina mize: 700 mm, dolžina mize: 1.200 mm, globina grla: 370 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Eccentric presses are mechanical press types operated by an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Ready-to-use with PLC control and dual-hand/foot pedal operation Areas of Application - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-way guide slide • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel Bjdpsx N Nfhsfx Agtelg • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Designed according to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual-hand/foot pedal operation system • Mechanical safety system • Emergency motor reverse feature • Complies with occupational safety regulations • CE compliance ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch-screen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die according to requirements • 8-way slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Bed–ram distance: 530 mm Ram–table distance: 650 mm Distance between side frames: 470 mm Ram adjustment (shut height adj.): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchor dimension: 940 mm Side anchor dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamping slot diameter: Ø60 mm Ram size: 780×400 mm Floor-to-table height: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 3 kW (4,08 KM), stiskalna sila: 35 t, hod: 70 mm, širina mize: 400 mm, dolžina mize: 600 mm, skupna masa: 1.500 kg, prebijalna sila: 35 t, nastavitev hoda: 45 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control + dual hand/foot control Applications: - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide guides • Nodular cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 heat-treated steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double-coil safety valve • Manually adjustable stroke • Light curtain hand/finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor operation • Complies with occupational safety regulations • CE standard compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD (standard for 150–300 ton) • Hydraulic safety lock (standard for 200–300 ton) Bjdpfox N Nd Rox Agtolg • Spare bolster plate • Decoiler, feeder, and straightener • 1 set of die/tools as requested • Eight-point slide guiding ✅ TECHNICAL SPECIFICATIONS (35 TON) Capacity: 35 Ton Usable lower bolster area: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Distance bolster–ram: 330 mm Adjustment of ram: 45 mm Lower bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety lock: Mechanical safety lock Lubrication system: Automatic lubrication PLC: Yes Safety barrier: Yes Operation system: Pneumatic clutch–brake system Installation type: Floor-mounted Frame type: C-frame steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approx. machine dimensions (L×W×H): 1100×1400×1800 mm Approx. weight: 1500 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, prebijalna sila: 200 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 60 mm, nastavitev hoda: 180 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready use with PLC control and dual hand/foot controls Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-surface slide guides • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Central, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-solenoid safety valve • Manually adjustable stroke • Light curtain hand–finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor movement • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Decoiler, feeder, and straightener • One set of tooling/custom die as requested • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Bed–ram distance: 500 mm Slide–bed distance: 600 mm Distance between uprights: 510 mm Ram adjustment (shut height): 130 mm Blodpjvtyx Ijfx Agtsg Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchor distance: 920 mm Side anchor distance: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping slot diameter: Ø60 mm Ram size: 620×350 mm Floor to bed height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: If you require any changes to the technical specifications, please let us know. ✅ MANUFACTURING / SUPPLY NOTE: This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 160 t, širina mize: 920 mm, dolžina mize: 660 mm, globina grla: 320 mm, prebijalna sila: 160 t, vrtina cilindra: 55 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) Bedpsvtywdofx Agtelg - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Areas of Application - Cold punching and cutting operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-point slide guiding • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Light curtain finger-hand safety system • PLC control system • Dual hand/foot pedal operation system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Complies with CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster table • Decoiler, feeder, and straightener • One set of dies per requested specifications • 8-point slide guiding ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table-ram distance: 500 mm Slide-table clearance: 540 mm Distance between side frames: 500 mm Ram adjustment: 120 mm Approx. press width: 1,600 mm Approx. press depth: 2,280 mm Approx. press height: 2,750 mm Front anchor dimension: 840 mm Side anchor dimension: 1,300 mm Table hole diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1,450 rpm Approx. weight: 7,100 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 130 t, širina mize: 750 mm, dolžina mize: 1.000 mm, prebijalna sila: 130 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 55 mm, nastavitev hoda: 140 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for series production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance due to centralized automatic lubrication • Production-ready use with PLC control + dual hand/foot control Application Areas • Cold cutting and punching operations • Cold breaking applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel frame body Blsdpfx Ajvtyvgjgteg • Four-face guided slideways • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection safety system with light curtain • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliance with occupational safety regulations • CE standard conformity ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of dies manufactured to customer requirements • Eight-way slide guiding ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 tons Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between uprights: 450 mm Ram adjustment (regulation): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring size: 790 mm Side anchoring size: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, širina mize: 670 mm, dolžina mize: 950 mm, prebijalna sila: 100 t, prebojna odprtina v mizi: 180 mm, vrtina cilindra: 45 mm, nastavitev hoda: 120 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Presses are mechanical press machines that operate with force generated via an eccentric mechanism, designed for cold forming operations such as punching, cutting, and shaping with dies. Thanks to their high production speed and repeatability, they are efficient and reliable solutions for mass production lines. CRONOSSTECH C-Type Eccentric Press 100 Ton is designed for stable performance in cold forming applications. Featuring a rigid steel frame construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers dependable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) Bledpfx Agovtx Instjg - Low maintenance need with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slideway guides • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts from 4140 tempered steel • Central full automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor movement • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster • Decoiler, feeder, and straightener • One set of dies according to customer specs • 8-sided slideway guides ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between uprights: 420 mm Ram adjustment (shut height): 85 mm Approx. machine width: 1400 mm Approx. machine depth: 1900 mm Approx. machine height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Stroke per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 80 t, širina mize: 660 mm, dolžina mize: 860 mm, prebijalna sila: 80 t, prebojna odprtina v mizi: 180 mm, nastavitev hoda: 110 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guideways • Spheroidal graphite cast iron connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulation compliant Bedpfovtx H Rex Agtjlg • CE standard compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set manufactured to requested specifications • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Tons Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed distance: 420 mm Distance between uprights: 400 mm Ram adjustment: 85 mm Approximate width: 1400 mm Approximate depth: 1735 mm Approximate height: 2220 mm Front anchorage size: 670 mm Side anchorage size: 1040 mm Bolster hole diameter: Ø190 mm Bolster dimensions: 540×740 mm Die fixing hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Should you require changes to technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 60 t, širina mize: 590 mm, dolžina mize: 800 mm, prebijalna sila: 60 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 40 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming with dies. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual hand/foot pedal control Application Areas: - Cold cutting and punching operations - Cold forging applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rods and gear housings • Crankshaft and transmission shafts from 4140 tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination Blodpfx Agevtx D Notjg • CE safety compliant • Double-coil safety valve • Manual adjustable stroke • Finger–hand protection with light curtain safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • Custom-designed die set • Eight-slide guide ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Table–ram distance: 360 mm Ram–table distance: 395 mm Distance between walls: 380 mm Ram adjustment (stroke): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchorage: 630 mm Side anchorage: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die clamping slot diameter: Ø40 mm Ram size: 340×220 mm Floor to table height: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 SPM Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please notify us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 4 kW (5,44 KM), stiskalna sila: 40 t, širina mize: 440 mm, dolžina mize: 700 mm, prebijalna sila: 40 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 35 mm, nastavitev hoda: 80 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press used in cold forming operations such as punching, cutting, and forming with dies. It operates by transmitting force through an eccentric mechanism. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance thanks to centralized automatic lubrication - Production-ready use with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold notching applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-point guided ram • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Compliant with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as specified • Eight-point guided ram ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between side frames: 330 mm Ram adjustment (setting): 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage dimension: 575 mm Side anchorage dimension: 740 mm Blodovtx Axspfx Agteg Table hole diameter: Ø150 mm Table size: 440×630 mm Die holder slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10–70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: For any requests to modify the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, hod: 300 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 90 mm/s, višina mize: 900 mm, proizvajalec krmilnikov: ESA, model krmilnika: ESA S830, delovna širina: 3.100 mm, upogibna sila (maks.): 160 t, razdalja med stojali: 3.345 mm, vrsta upravljanja: CNC krmiljenje, število osi: 4, vrsta aktuacije: električni, Bending Capacity: 3100 mm / 160 Tons (E160 Model) STANDARD FEATURES CNC-controlled belt-driven servo press brake Y1 – Y2 – X – R axes CNC-controlled (4 axes) CNC control unit (ESA S830 – 10” touchscreen, 2D graphical display) Automatic bending calculation and collision prevention functions High-precision synchronized servo drive system Belt-driven ram movement system, oil-free and low maintenance Spring-loaded ram structure supporting energy recovery O-type rigid frame design (minimum deformation) 300 mm stroke 410 mm throat depth Servo motorised backgauge system (X + R axes) Backgauge positioning accuracy: ±0.03 mm Backgauge travel: X axis: 750 mm R axis: 250 mm Hardened ball screws and linear guides 2 adjustable backgauge fingers, 3-step European type quick-clamp upper tool holder (Promecam type) European type narrow lower table Standard upper tool (H: 67 mm – 85° – R: 0.8 mm) Standard lower die (60×60 mm – 4 V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) Bledpox Nquwjfx Agtog High-precision optical linear scales LED work area lighting Sliding front support arms Double foot pedal Emergency stop buttons CE-compliant safety equipment OPTIONAL FEATURES Additional backgauge axes (Z1 – Z2 – X5) Backgauge distance extension to 1000 mm Motorized crowning system Hydraulic upper and lower tool clamping systems Front safety laser system (AKAS or DSP type) Rear safety light barrier CNC-controlled sheet support arms Laser bending line Laser angle measurement system Automatic angle measurement systems Electrical cabinet with air conditioned cooling system Additional backgauge fingers Custom die and table solutions TECHNICAL SPECIFICATIONS (E160 / 3100 MODEL) Bending force: 160 tons Bending length: 3100 mm Distance between side frames: 3345 mm Stroke: 300 mm Throat depth: O-type frame Daylight opening (upper–lower beam): 515 mm Table height: 900 mm Speeds Approach speed: 90 mm/s Bending speed: 10 mm/s (CE standard) Return speed: 90 mm/s Backgauge X axis travel: 750 mm R axis travel: 250 mm X axis speed: 400 mm/s R axis speed: 100 mm/s Z axis speed: 600 mm/s General Main motor power: 2 × 7.5 kW Machine weight: ~9,500 kg Machine dimensions (L×W×H): approx. 4600 × 2100 × 2700 mm

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, višina mize: 965 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, STANDARD FEATURES CNC-controlled hydraulic press brake Y1 – Y2 – X – R axes CNC controlled (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Bsdpex Nqqrefx Agtelg Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo motorized backgauge Backgauge travel distances: X axis: 750 mm R axis: 250 mm Backgauge system with ball screws and linear guides Sliding type front support arms Manual crowning system (wedge type) European-style narrow bottom table European-style quick upper tool clamping system (Promecam type) High-precision linear scales Standard upper tool (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4-groove V: 16 / 22 / 35 / 50 mm) Laser front safety system LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Backgauge systems with 4 / 6 / 8 axes starting from X + R Extension of backgauge X axis distance to 1000 mm Additional backgauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide bottom table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet air conditioning cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (daylight): 515 mm Throat depth: 410 mm Table height: 965 mm Backgauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/s Working speed: 140 mm/s Return speed: 10 mm/s Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 2 °, frekvenca hodov (min.): 15 obr/min, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke, and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic adjustment of cutting angle according to material type and thickness Automatic stroke reduction for short sheet cutting (higher speed) CNC software infrastructure to reduce operator errors Heavy-duty steel construction frame subjected to stress-relieving process Hardened guides and roller-equipped upper beam movement system 1,000 mm CNC-controlled, motorized, and programmable backgauge Backgauge features: - Programmable retract function - Lift-up feature for long parts - ±0.1 mm positioning accuracy Ball transfer front support table Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special linkage system minimizing maintenance requirements Front squaring arms with ruler, T-slots, and stops (1,000 mm) Cutting line illumination and shadow wire Front finger guard (retractable type) Front and side safety guards Foot pedal Movable control pendant Emergency stop buttons Safety equipment conforming to CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with forward feeding) Angle-adjustable front gauge (0–180°) Front squaring arms in custom lengths Full-length front finger guard (openable) Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Bsdex Nqp Iepfx Agtslg Laser cutting line indicator Oil heater or oil cooler Automatic or manual central lubrication system Electrical cabinet with air-conditioned cooling system CNC-controlled front sheet support and feed arms Custom throat depth (500 mm) Light-duty safety guards TECHNICAL SPECIFICATIONS (MODEL C 06 / 3100) Cutting capacity (450 N/mm²): 6 mm Cutting capacity (700 N/mm²): 4 mm Cutting length: 3,100 mm Cutting angle: 0.5° – 2° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge stroke (X axis): 1,000 mm Cutting speed: 10 – 15 strokes/min Motor power: 10 kW Oil tank capacity: 200 liters Machine weight: ~6.7 tons Machine dimensions (LxWxH): approx. 4,830 x 2,995 x 1,975 mm

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 4.000 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, frekvenca hodov (min.): 12 obr/min, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (according to material type and thickness) Automatic stroke reduction feature (increased speed for short cuts) High precision, stress-relieved steel frame Hardened guideways and roller-equipped upper beam movement system 1,000 mm CNC-controlled, motorized and programmable back gauge Back gauge features: Blodpfjx Nqphsx Agtsg - Programmable retraction - Lifting function for long pieces - ±0.1 mm positioning accuracy Ball screw-driven sheet support front table Upper blade: double-edged / Lower blade: four-edged High alloy steel knives Special articulated system reducing maintenance requirements Front support arms with ruler, T-slot, and stopper (1,000 mm) Cutting line illumination and shadow wire Front finger guard (openable type) Front and side safety covers Foot pedal Movable control pendant Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with forward feeding feature) Adjustable front squaring arm (0–180°) Front support arms in custom lengths Full-length openable front finger guard Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line indicator Oil heater or oil cooler Automatic or manual central lubrication system Climate-controlled cooling system for electrical cabinet CNC-controlled front sheet support and feeder arms Custom throat depth (500 mm) Light-duty guard TECHNICAL DATA (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Back gauge travel distance (X axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 4.000 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, frekvenca hodov (min.): 12 obr/min, najv. debelina pločevine: 16 mm, najv. debelina jeklene pločevine: 16 mm, Standard Features • ELGO P40T Touchscreen NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade gap, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized back gauge • 250 mm throat depth • Programmable back gauge retraction function • Back gauge lift feature for parts longer than 1,000 mm • Adjustable cutting length from the control panel to increase the number of cuts in short cuts • Ball transfer sheet support table • Upper blade with 2 cutting edges / lower blade with 4 cutting edges • Special pivot system reducing maintenance requirements • 1,000 mm front support arms with rulers, T-slots, and stops • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control lever and enclosure cabinets • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front delivery (Type 2) • Adjustable angle square 0-180º • Custom-length front support arms • Special throat depth 500 mm • Full-length openable front finger guard cover • Front finger safety light curtain Blsdex Npd Ropfx Agtog • Special blade • Laser cutting line • Oil heater or oil cooler • Automatic or manual centralized lubrication • Electrical cabinet cooling with air conditioner • CNC front sheet support arms • Rear light barrier compliant with CE standards • Light-duty safety guard TECHNICAL SPECIFICATION VALUE Cutting Capacity (450 N/mm²) 16 mm Cutting Capacity (700 N/mm²) 10 mm Cutting Length 4,000 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 6 / 12 spm Throat Depth 250 mm Back Gauge Travel (X) 1,000 mm Table Length Table Width Motor Power 30 kW Weight 21.5 tons

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, frekvenca hodov (min.): 13 obr/min, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract function • Backgauge lifting function for parts longer than 1,000 mm • Adjustable cutting length from the control panel to increase the number of cuts in short sheet cutting • Ball transfer sheet support table • Upper blade with 2 cutting edges / Lower blade with 4 cutting edges • Special pivot system reducing maintenance requirements • 1,000 mm front support arms, with ruler, T-slots and stoppers • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control arm and safety enclosures • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front delivery (Type 2) • Adjustable angle square 0-180º • Front support arms at required lengths Bsdpfsx Npddsx Agtslg • Special throat depth 500 mm • Full-length openable front finger guard • Front finger safety light curtain • Special blade • Laser cutting line • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front sheet support arms • Rear light barrier complying with CE standards • Light type safety guard TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 7 / 13 spm Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 Tons

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), hod: 310 mm, obratovalna hitrost: 8 mm/s, hitrost vzvratne vožnje: 80 mm/s, višina mize: 985 mm, globina grla: 510 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 400 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system Bljdox Npalspfx Agtjg • Manual crowning system (Original WILA cam) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options, starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove tooling • Backgauge X travel: 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Descent Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22500 Main Motor Power (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, višina mize: 935 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 175 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system Bledsx Nn U Ujpfx Agtjg • Manual crowning system (Original WILA wedge type) • Narrow bottom table (European type) • GIVI brand linear scales • Standard top punch (H: 67, 850 R:08) • Standard bottom die (60x60 mm, 4 channels V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic top and bottom die clamping • Wide bottom table for multi-channel tooling • Backgauge X-axis travel up to 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge stop TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 175 Bending Length (mm) 3100 Clearance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 180 Machine Weight (kg) 9700 Main Motor Power (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey