Biesse Akron 1440 nakup rabljenega (661)

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support Nwsdpfxsidqd Ts Abrsh No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports Nwodpfeidqf Rox Abrjh No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction Nodpfx Absvnq Txerowh NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit on upper drilling support No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Digital display for position data (axes) Total connected load (kW): 25 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. Nwedpfsi D D Tfjx Abroh The CNC control system manages the movement (Y-axis) of the stops. OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), Electronic machine, CNC-controlled, PC control type NC 500 – Tooling System software No. 2 pass-through motorized conveyor belts – feed speed (m/min) approx. 35 - 75 No. 2 horizontal drilling units Drilling spindles per horizontal drilling unit (Qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling units Drilling spindles per lower vertical drilling unit (Qty) 2 x 1.8 HP No. 3 upper vertical drilling units Spindles per upper drilling unit (Qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 endless screws for chip removal Nsdpfx Abehvi Dusrowh CNC controls the movement (X-axis) of the horizontal drilling units CNC controls the movement (Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axis Y1 and Y2) of the drilling spindles CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC control manages all programming of automatic work cycles

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Nedpfx Absu Rc Anjrjwh Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Nwedpfxju Rc Hye Abroh Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: zelo dobro (rabljeno), Flexible N.C.-Automatiklinie zum Bohren, Fräsen und Einsetzen (Beschläge). Numerische Steuerung mit Albatros-Software. Bestehend aus: Nedpfxoidmkre Abrjwh KZ2046) Einlauf mit Stachelmagazin (Puffer) für 18 Positionen KZ2047) Übergabestation mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabestation mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabestation mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabestation mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn ebenfalls mit motorisierten Bändern (zum Wenden der Platten um 180° zur Weitergabe an die Montagelinien)

Stanje: zelo dobro (rabljeno), Spalt- und Nutmaschine (gebraucht zum Nuten und/oder zum Teilen eines einzelnen Paneels in zwei Teile) - Minimale Werkstücklänge: ca. 250 mm - Maximale Werkstücklänge: ca. 2.700 mm - Minimale Werkstückbreite: ca. 124 mm - Maximale Werkstückbreite: ca. 1.200 mm - Werkstückdicke (min./max.): ca. 10 / 60 mm - Max. Vorschubgeschwindigkeit: ca. 50 m/min - Installierte Gesamtleistung: 82 kW Mit folgenden Aggregaten: POS. 1 Untere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 2 Obere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 3 Untere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 4 Obere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm Nodpfx Abjyx S N Uerjwh POS. 5 Untere Hauptsägeeinheit (Rotax Elektromotor 11 kW), max. Sägeblattdurchmesser ca. 450 mm POS. 6 Obere Hauptsägeeinheit (Rotax Elektromotor 11 kW), max. Sägeblattdurchmesser ca. 450 mm OPTIONAL: Schalldämm- und Schutzeinhausung (Kabine)

Stanje: zelo dobro (rabljeno), Delovni center z enoto za lepljenje robov v zelo dobrem stanju. Nsdeylcgpjpfx Abrjwh Tehnični podatki bodo kmalu posodobljeni.

Stanje: rabljeno, številka stroja/vozila: 008113, Maks. širina panela: 3800 mm Maks. dolžina panela: 3200 mm Nwsdpjw Iddhsfx Abroh Maks. izteg glavnega žaginega lista: 75 mm Število vpenjalnih klešč: 8

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 5.900 mm, pomik osi Y: 1.560 mm, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 60 m/min, največja hitrost vrtenja: 20.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Nsdpfxeyxm Swe Abrjwh Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles (X direction): 6 Horizontal drilling spindles (Y direction): 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: positioned on the head MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8173

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood Code: RU0006888 - Manufacturer Code: C0151A07 - Condition: Used - Functionality: Fully operational - Weight: 25KG - Dimensions: 70X46X34 cm - If interested, we offer an overhaul service. Please contact us. Njdpfeu H H Erjx Abrowh

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 Nodpfxoyxndbj Abrswh TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: rabljeno, BIESSE SAND REGAL 1350 je industrijski širokotrak brusilni stroj, namenjen za kalibracijo in fino brušenje ploščatih kosov v pohištveni in ploščni industriji. Serija REGAL predstavlja robustno proizvodno rešitev, primerno za srednje in velike proizvodne obsege. Stroj je zasnovan modularno in omogoča kombinacijo kalibracijskih ter končnih obdelovalnih operacij v enem prehodu, kar občutno poveča produktivnost. Nwedpeynb Rfjfx Abrsh

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Nwsdpsywk Elofx Abrsh Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1000007687, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 60 mm, skupna širina: 4.400 mm, skupna dolžina: 7.290 mm, moč: 20 kW (27,19 KM), največja hitrost vrtenja: 18.000 obr/min, Popolnoma delujoč. Še vedno v uporabi. Nwjdex I A A Rspfx Abrsh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, številka stroja/vozila: 1000017221, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 900 mm, pomik po osi Z: 60 mm, model krmilnika: BSuite3, število vreten: 17, TEHNIČNI PODATKI Delovno območje osi X: 2.500 mm Delovno območje osi Y: 900 mm Nwedpfx Aoyzpcdjbreh Delovno območje osi Z: 60 mm Število osi: 3 Orodje: ISO 30 Vretena Skupno število vreten: 17 6 vertikalnih v osi X 5 vertikalnih v osi Y 4 horizontalna v osi X 2 horizontalna v osi Y PODROBNOSTI O STROJU Numerično krmiljenje: Programska oprema BSolid - BSuite3 OPREMA Samodejna naprava za razkladanje Vgrajeno rezilo za izdelavo utorov Sprednji varnostni in zaščitni sistemi z varnostnimi preprogami Obodna zaščitna ograja Zunanja referenca: MME002

Stanje: zelo dobro (rabljeno), PC kontrola tipa NC 500 (Software Tooling System) Br. 2 motorizovanih transportnih traka Br. 2 horizontalnih nosača za bušenje Br. 2 bušaće jedinice za svaki horizontalni nosač Maks. radna širina (mm) 3200 - Min. radna širina (mm) 205 (približno) Br. 8 donjih vertikalnih nosača za bušenje Br. 2 bušaće jedinice za svaki donji vertikalni nosač Br. 4 gornjih vertikalnih nosača za bušenje Nedpfx Asyvrrqsbrswh Br. 2 vretena za svaku bušaću jedinicu na gornjem nosaču Br. 5 gornjih vertikalnih stega za radne komade Br. 2 beskonačna puža za odvod strugotine Digitalni prikaz pozicijskih podataka (osa) Ukupna priključna snaga (kW) 48 CNC kontrola upravlja pomeranjem (osa X) horizontalnih nosača za bušenje CNC upravlja pomeranjem (osa X) transportnih traka CNC kontrola upravlja pomeranjem (osa Y) graničnika CNC upravlja pomeranjem (osa Z) svih vertikalnih nosača za bušenje

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Komponente ADVANTAGE C prečni podajalnik: avtomatski ROTACIJSKA NAPRAVA (flipar): na voljo Nwodoy Ui Rnspfx Abrsh BIESSE FTT: s 4 glavami, vrtanje in rezkanje, avtomatska menjava orodij BIESSE FHT: 2 DELOVNI ENOTI za vodoravno vrtanje in vstavljanje moznikov WANDRES: krtačno čiščenje od zgoraj ADVANTAGE SC prečni odvzemnik: avtomatski Dimenzije plošč Dolžina plošče: 240 – 3.200 mm Širina posamezne plošče: 140 – 1.550 mm Širina plošče: 140 – 800 mm Debelina plošče: 12 – 60 mm Vrtalne enote Vrtalne glave FTT 800: 2 obdelovalna centra s 4 vrtalnimi enotami – 5 delovnih miz Navpična vretena (v smeri X): 14 neodvisnih na glavo Navpična vretena (v smeri Y): 18 neodvisnih na glavo Vodoravna vretena (v smeri X): 3 neodvisna, z dvojnim izhodom Vodoravna vretena (v smeri Y): 3 neodvisna, z dvojnim izhodom Sistem menjalnika orodij Revolverski nosilci: 2 Pozicij v kaseti: 56 Uporaba: Avtomatska menjava orodij navpičnih vreten na 4 vrtalnih enotah dveh obdelovalnih centrov A in B. Rezkalna vretena Elektro vreteno 1: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Elektro vreteno 2: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Lateralne pozicionirne enote Delovna mesta: 2 za vzporedno obdelavo identičnih ali zrcalno obrnjenih plošč Levi pozicionirni element: fiksiran za bočno referenco Desni pozicionirni element: pomičen v smeri X, na spodnjih nosilcih, linearno voden Nastavljanje: avtomatsko glede na X-dimenzijo plošče Pogon: brezkrtačni motor z digitalnim nadzorom Funkcija: zaznavanje dejanske dolžine X v obdelovalnem centru, avtomatska korekcija vrtalnih pozicij Maks. hitrost premika: 120 m/min Nakladanje in razkladanje Vhodni sistem: 1 pasovni transporter s prečnim dovodom, lasten pogon Izhodni sistem: 1 pasovni transporter s prečnim izhodom, lasten pogon Dodatno: čistilni ventilator v območju izhoda Vrtalne glave FHT (vodoravne): Obdelovalni centri z 2 delovnima enotama (1 LH / 1 RH enota) – 3 delovne mize. VODORAVNE VRTALNE ENOTE s 24 neodvisnimi vreteni za montažo na 2 delovni enoti VODORAVNE VSTAVITVENE ENOTE Z 5+5 APLIKATORJI LEPILA IN VLOŽKI ZA MOZNIKE PREMERA 8 mm DRŽALO ZA ORODJA za hitro menjavo vreten vrtalnih enot ENOTA ZA VBRIZGAVANJE LEPILA IN VSTAVLJANJE MOZNIH 8 mm: za vgradnjo moznikov premera 8 mm in dolžine 25-35 mm (enota je predpripravljena za te dimenzije). Potrebne so enote za vstavljanje moznikov premera 8 mm. OPOMBA: Enota za vstavljanje moznikov ni bila nikoli uporabljena in ni testirana. Preskus ni mogoč. ADVANTAGE C 3200 TRASV. 1 POS – nakladanje ADVANTAGE SC 3200 TRASV. 1 POS – razkladanje Varnostne lastnosti Standardi: CE skladni Varnostna oprema: obsežna zaščitna ohišja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Stroj za obdelavo robov iz leta 2008. BIESSE Edge Stream B1 je opremljen z obsežnim kompletom orodij, ki vključuje PU-lepilno enoto, predrezalno enoto, rezalnik robov in enoto za fino rezkanje. Poleg tega ima stroje za zaobljenje robov, potezne nože za robove, nihajne ščetke in grelec za robove. Če iščete visokokakovostne možnosti obdelave robov, priporočamo stroj BIESSE Edge Stream B1, ki ga imamo na voljo za prodajo. Za več podrobnosti nas kontaktirajte. • Sistem za pršenje tekočin (ADZ) • Predrezalna enota (RT) • PU-lepilna enota (SP10, Nordson) • Rezalnik robov (IT90) • Uravnoteženi rezkalnik orodja (RS10) • Fina rezkalna enota (RF40) • Enota za zaobljenje (AR60) • Odstranjevalec robov (RB40) • Enota za odstranjevanje lepila (RC20) • Nihajne ščetke Nwodoyw Nu Eepfx Abreh • Grelec za robove (PH10)

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, X working range: 6,170 mm Y working range: 1,380 mm Z working range: 155 mm Main motor power: 7.5 kW Maximum spindle speed: 24,000 rpm Aggregate heads 4th axis C axis Tool changer positions: 10 Vertical drilling heads: 20 Horizontal drilling units X: 6 Horizontal drilling units Y: 2 Arm structure Nodper E A U Iefx Abrewh Worktable Console table Number of rails: 10 Positioning aid Vacuum pump capacity: 2 x 125 m³/h Chip conveyor

Stanje: rabljeno, CNC machining center for drilling and milling of wood panels, wood-based materials, plastics, and non-ferrous alloys. Working area X - Y: 3685 - 1508 – 150 mm Continuous worktable Lateral and front reference stops Pendulum (alternating) machining 2 independent working zones enabling simultaneous processing of 2 identical, mirrored, or different workpieces Five-sided workpiece machining "C-frame" design machine 4-axis HSD routing unit, HSK F 63 spindle connection Max spindle speed: 24,000 rpm Inverter 10-position tool magazine mounted on head – max tool diameter 215 mm – max tool weight 4 kg Biesseworks software Easy programming File import capability Remote control panel/console Teleservice and video diagnosis for real-time support Automatic guideway lubrication Vacuum pump: 1 x 250 m³/h Central extraction duct diameter: 250 mm Safety devices Side guards for unit protection Nwodpjywxc Ssfx Abrjh Safety light barriers instead of mats Perimeter guarding with access door Compressed air consumption: 400 NI/min Operating pressure: 7–7.5 bar Air consumption for extraction: 5300 m³/h Machine weight: 4,600 kg Machine documentation: operating and maintenance manual, software manual, spare parts catalog, electrical diagram, and EC declaration of conformity.

Stanje: novo, Leto izdelave: 2025, Različni lepilni rezervoarji za lepilne trakove in obrezovanje na strojih za lepljenje robov. Dobavljamo nove lepilne rezervoarje ali obnovimo vaše rabljene. Prodajamo tudi posamezne nadomestne dele. Scm, Stefani, Idm, Ima, Biesse. Nodpef Tc Rqefx Abrowh

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0062 - Koda proizvajalca: 6314A0111 - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Združljiv stroj: CNC BIESSE ROVER 23/24/27/30/346 - Če ste zainteresirani, nudimo storitev obnove, kontaktirajte nas. Teža in dimenzije za prevoz: 2,5 kg 20x20x20 cm Nodpsvu Auuefx Abrewh