York Hladilni Stroj nakup rabljenega (29.175)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg Hjdpfx Ast Dx U Sjlfsfg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Hfodpfsfbr S Rjx Alfeg Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Hjdpfx Aobahd Ejlfsfg Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Hjdpfx Aouxqzuolfefg Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Hfjdett Da Depfx Alfjg Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Hfsdov Hm Nmopfx Alfsg Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Strapping Machine SIVORON / GIGANT Model S 669 L - Integrated strap spool - Strap width: 6 / 9 / 12 / 15.5 mm - Electrical connection: 230 V, 50 Hz - Adjustable strap tension - Heat-sealing system - Idle rollers in worktable - Mobile with swivel castors Hjdpfx Alouxm Haefsfg Dimensions (L x W x H): 1460 x 600 x 1600 mm Weight: approx. 70 kg Note on used machines: • Technical details and interim sale subject to change and errors excepted. • All prices quoted are ex works – loading free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. Hsdpfx Alsg Nn E Nefsfg • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: Bodor, vrsta laserja: vlakenski laser, Uporabni material: kovina Stanje: novo Hsdpeg Ev T Eofx Alfefg Tip laserja: vlakenski (fiber) laser Delovno območje: 3000 x 1500 mm Hitrost rezanja: 0–40.000 mm/min Podprte grafične oblike: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Debelina rezanja: 0–30 mm CNC: da Način hlajenja: vodno hlajenje Krmilna programska oprema: Bodor Pro Država izvora: Kitajska Blagovna znamka: Bodor Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: IPG/MAX Blagovna znamka laserske glave: bodorgenius Blagovna znamka krmilnega sistema: bodorpro Teža (kg): 2.200 kg Ključna prodajna prednost: ležišče iz varjene plošče tipa utor-pero (tenon-and-mortise) Garancija: 3 leta Moč laserja: 1.000 W Napajalna napetost: 110V/220V/380V, 50Hz/60Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Zelo dobro ohranjen stroj malo delovnih ur, Kontak možen tudi preko WatsApp, Govorimo Angleško Nemško in ex YU jezike. Strj se nahaja v Nemčiji. Vsa specifikacija mašine je v prilogi pdf Hfodpfor Idkwox Alfeg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Odlično ohranjen stroj, trifazni priklop malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Hjdpoy R Ep Eefx Alfsfg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Hfedpfsxwuryex Alfeg Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Stanje: novo, Leto izdelave: 2024, Naprodaj je nova formatna krožna žaga Felder K540S z višino reza do 140 mm. Hfjdpfsy R N Apex Alfeg Stroj je razstavljen v našem razstavnem prostoru in je zato kot nov (polna garancija). Tehnični podatki: - Višina reza 140 mm - Žagin list D= 300-400 mm - Motor 5,5 kW / 7,5 KM - Formatna drsna miza X-Roll, dolžina reza 2800 mm - Paralelni rez 800 mm - Podaljšana miza 1300 mm - Dolžinski prislon na podaljšku 2600 mm - Vodilo s segmentnim nagibanjem "Easy-Glide" - Zgornje zaščitno ohišje v skladu s CE - 3x 400 V / 50 Hz Stroj je na voljo v A-5431 Kuchl in ga lahko kadarkoli ogledate v času naše odprtosti. Vmesna prodaja pridržana! Sorodni pojmi: formatna žaga, formatirka, krožna žaga, mizarska žaga, stroj za obdelavo lesa, Felder Referenca: R-A0117

Leto izdelave: 1900, stanje: rabljeno, Rabljeni stroj A2/35”. Minimalni premer 80 mm, največji 900 mm. Minimalna dolžina hloda 180 cm. Cena velja za stroj v trenutnem stanju. Podajalne verige in verižniki so lahko obnovljeni ali dobavljeni z doplačilom. Hedowqmyfjpfx Alfofg

Stanje: rabljeno, OTT MEGAtronic 11 Lack Širokopasovni umerjevalno-fini brusilni avtomat Hfedpoy Nl Skofx Alfog 1. Brusilna enota s umerjevalnim valjem DM 150 mm, 90° Shore 2. Brusilna enota z elektronsko krmiljenim, segmentiranim membranskim brusnim čevljem Delovna širina 1.100 mm MEGA paket za brušenje laka Nastavljiva hitrost podajalnega traku 3-15 m/min Moč motorja 1. brusilne enote 11 kW Moč motorja 2. brusilne enote 11 kW z drugo hitrostjo traku 4,5 m/s Dodatna posebna oprema: VAKUUMSKA MIZA VAKUUMSKA NAPRAVA 3 kW Odpih traku Togi brusilni čevelj za masivno in okvirno brušenje Stroj je delavniško obnovljen in v vrhunskem stanju iz obrtnih delavnic Na zalogi v Liebochu

Stanje: zelo dobro (rabljeno), Naprodaj je rabljena Felder KFS-36 krožna žaga s rezkalnim vretenom in tremi rezkalnimi hitrostmi. Stroj je v zelo dobrem stanju, obnovljen in pregledan s strani našega strokovnega osebja. (Popolnoma funkcionalen) Hjdpfx Alsy Nmq Iefofg Tehnični podatki: - Krožna žaga in rezkar nagibna 90-45° - Litoželezni pomični voziček z kotnim vodilom - Konzolna miza - 3 rezkalne hitrosti: 3800/6100/7800 vrt/min - Vrtalna podpora - 3 motorji po 2,2 kW / 3 KM Stroj se nahaja v A-8561 Söding in si ga lahko ogledate kadarkoli v času naših delovnih ur. Vmesna prodaja pridržana! Sorodni pojmi: žaga, krožna žaga, rezkar, kombiniran stroj, kombinirka, rezkalni stroj Referenca: R-C0723

Stanje: novo, Polirne krtače iz perlona 45/25x4 Hodpsy R R H Nofx Alfofg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Hfjdpfx Aloy Iwlajfeg

Stanje: rabljeno, Leto izdelave: 2004, Double-end profiler and rebating automatic machine for window and door production Hfodpfx Aledfx Hcjfjg Working width: 4000 mm 3 units on each side 1 x saw/chipper 2 x milling spindles - spindle stroke 800 mm! Rebating automatic machine with 16 spindles NC-controlled Many spare parts included Further specifications available upon request Note on used machinery: • Errors in technical specifications and intermediate sale reserved. • Stated prices are ex-works, loaded free onto truck. • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!) Hfsdpfec Tmygsx Alfog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 20.045 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 300 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 60.000 obr/min, hitrost vretena (min.): 9.000 obr/min, obremenitev mize: 300 kg, skupna masa: 4.500 kg, pomik osi W: 450 mm, Oprema: dokumentacija / priročnik, Naprodaj rabljeni koordinatni brusilni stroj Hauser S35-400, letnik 1997, v vzdrževanem stanju z raznim dodatkom po slikah. Hodpfx Ajyywb Selfefg Premiki: X-os: 500 mm Y-os: 300 mm W-os: 450 mm Hitrost pomika Z (brezstopenjsko): 0,5-14000 mm/min Mere mize: 600 x 380 mm Največja obremenitev mize: 300 kg Krmiljenje: GE Fanuc Series 16-M Mere (d/š/v): 4,25 m × 4 m × 3,25 m Skupna teža: 4500 kg Stroj je takoj na voljo! Cena vključuje nakladanje na tovornjak!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, laserska moč: 2.400 W, najv. debelina pločevine: 8 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, maks. debelina aluminijaste pločevine: 4 mm, potovalna razdalja osi X: 3.085 mm, pomik osi Y: 1.740 mm, skupna masa: 23.000 kg, skupna dolžina: 9.100 mm, skupna širina: 7.900 mm, skupna višina: 2.400 mm, Oprema: CE označba, dokumentacija / priročnik, nujno zaustavitev, varnostna svetlobna zapora, Stroj je v dobrem stanju. Hedpfx Asymrn Ejlfjfg

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 082429, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.260 kg, leto zadnje generalne obnove: 2025, Oprema: CE označba, SCM Olimpic K500 – Robna lepilka – Leto 2008 Naprodaj robna lepilka SCM Olimpic K500, letnik 2008, zanesljiv in robusten stroj, idealen za mizarska in industrijska dela. Hfodpfx Asy Sph Iolfsg ✔️ Popolnoma delujoča ✔️ Pripravljena za uporabo, ne potrebuje posegov ✔️ Vzdrževanje vedno opravljeno skrbno ✔️ Odlično splošno stanje Stroj bo na voljo od junija. Popolna rešitev za vse, ki iščejo profesionalno robno lepilko, takoj pripravljeno za delo. 📍 Možnost ogleda in preizkusa po dogovoru. 📞 Za več informacij nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, Univerzalni stroj COMEC RCG 900 za obnovo glav, blokov, bobnov in diskov osebnih in gospodarskih vozil. Širina obdelave: 320 mm Dolžina obdelave: 900 mm Največja delovna višina: 370 mm Največji hod mize: 1200 mm Pomik: 0,8 - 450 mm/min Največji premer zavornih bobnov: 1400 mm Hfodpfxjy Rffyo Alfeg Glavni motor: 5,5 Hp Obrati za obdelavo zavor: 35-70-50-100 vrt/min Približna teža z dodatki: 1700 kg Dimenzije: 2300 x 790 x 1700 mm (V)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2728, leto zadnje generalne obnove: 2023, Pakirni stroj za zavijanje v toplinsko krčljivo folijo oziroma flow pack pakiranje. Delovanje vključuje avtomatski dovod in iznos izdelkov. Obnovljen stroj je bil kupljen leta 2023 in nikoli uporabljen. Hsdpeyk Ulhofx Alfefg