Timken Hh421246 C nakup rabljenega (54.728)

Stanje: pripravljen za uporabo (rabljen), Indramat MAC 090C-0-KD-2-C/110-B-0/S001 trifazni servomotor s permanentnim magnetom, serijska številka po fotografiji, rabljen, močno vidne sledi uporabe, 100% delujoč, dobava po fotografijah. Dodpfx Aji D Ih Ajb Hekn

Stanje: pripravljen za uporabo (rabljen), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 SN: 68351 Trefazni servomotor s permanentnim magnetom, razmak pritrdilnih izvrtin: 152x152 mm, premer pogonske gredi: 32 mm, rabljen, z običajnimi sledmi uporabe, 100% delujoč, stroške pošiljanja prosimo povprašajte posebej! Dkjdpfxji D Ii Do Ab Hsn

Stanje: pripravljen za uporabo (rabljen), Indramat MAC093A-1-WS-2-C/130-A-0/S005 motor s trajnim magnetom SN:MAC093-56032, rabljen, z močnimi sledovi uporabe, 100% delujoč, dobava po fotografijah. Dsdpfxji D Im Ss Ab Hskn

Stanje: pripravljen za uporabo (rabljen), Indramat 112A-0-ZD-4-C / 130-B-0 / WI572LV / S005 permanentni izmenični servomotor + Heidenhain Rod 1424.003-600 rotacijski dajalnik. 250 040 12, serijska številka skladno s fotografijo, rabljeno, strokovno v celoti obnovljeno in preizkušeno z 12-mesečno garancijo, 100% delujoče, dobava po fotografijah. Dkodpfoi D Ipqox Ab Hjn

Stanje: novo, Indramat MAC112C-0-ED-3-C / 130-A-0 motor s permanentnim magnetom, serijska št.: 10106, neuporabljen, 100% delujoč, obseg dobave po slikah. Dksdpji D Iqcsfx Ab Hon

Stanje: novo, Indramat MAC112C-0-ED-3-C / 130-B-1 motor s permanentnim magnetom, serijska številka: 81912, nerabljen, 100 % delujoč, obseg dobave po slikah. Dksdpfx Abei D Iqgo Hon

Stanje: pripravljen za uporabo (rabljen), Indramat MAC 071A-0-ES-2-C / 095-A-0 trifazni servomotor s trajnim magnetom, SN:35588, strokovno v celoti obnovljen in preizkušen z 12-mesečno garancijo, 100 % delujoč, dobava po fotografijah. Za ta artikel dogovorjeni prodajni popusti ne veljajo. Za ceno prosimo povprašajte posebej! Dodpei D Ig Eefx Ab Hjkn

Stanje: pripravljen za uporabo (rabljen), Indramat MAC090B-0-PD-2-C / 110-A-0 // SN:39974, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100% delujoč, obseg dobave po fotografijah. Za ta artikel dogovorjeni popusti ne veljajo. Cena na zahtevo! Dkodpjtt U Afefx Ab Hon

Stanje: pripravljen za uporabo (rabljen), Rexroth MAC071B-0-TS-3-C / 095-A-1 / S001 motor s permanentnim magnetom MNR: R911224309, SN: MAC071-43580, rabljen, z izrazitimi sledmi uporabe, 100 % delujoč, dobava po slikah. Dodpfx Abji D Nfmo Hekn

Stanje: novo, Rexroth MAC117B-0-WS-4-C/130-A-1/WI1521LV motor s permanentnim magnetom, MNR: R911245926 , SN:MAC117-00854 , neuporabljen z sledovi skladiščenja, 100 % delujoč, dobava po slikah Dkodpfxoi D Ngno Ab Hen

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Dsdpfohp Rdlex Ab Hekn Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Dkedpfxolht H Ee Ab Hon Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Dedpfxey Ehrxs Ab Hekn Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Dedpfjhp Rcrex Ab Hjkn Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Dsdpfx Aedqzh Tob Hjkn Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Your Advantages - Stable pressing mechanism with low-wear, chrome-plated pliers - Press chamber wear bushing - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control - Screw channel with discharge auger - Separate oil tank with pump motor and valve control - Safety switch for oil temperature - Mounted on a stable base frame with rubber feet - Briquette length monitoring Robust design, low-maintenance technology, minimal space requirement: The machines of the C-series are particularly suitable for small and medium-sized businesses with a required throughput rate not exceeding 50–80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, such as wood, styrofoam, foam materials, paper, or biomass. All machines are available in left- or right-handed configurations. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Throughput rate up to (kg/h): 50 (depending on material) Hydraulic motor (kW): 5.5 Dedpfscnz U Eox Ab Hskn Auger motor (kW): 0.55 Oil volume (liters): 100 Weight (approx. kg): 800 Outstanding Features at a Glance - Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor designed for long operating periods - Briquette length monitoring: Controls briquette length for uniform sizing - Press chamber wear bushing: Prevents wear in the pressing area Location: Ex works – free loaded

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Dodpfx Astnz Hbeb Hjkn Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted lid - Control cabinet with PLC control Hydraulics: - Separate oil tank with pump motor and valve control - Oil temperature safety switch Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Dkjdpfx Absbtnf Es Hjn Briquette length monitoring Automatic On-Off Location: 54634 Bitburg

Leto izdelave: 1991, stanje: pripravljen za uporabo (rabljen), Pomik X/Y/Z: 380mm/280mm/300mm, delovne dimenzije X/Y/Z: 580mm/450mm/340mm, največja teža elektrode: 50kg. Dimenzije stroja X/Y/Z: pribl. 2100mm/1650mm/1750mm, teža: pribl. 3500kg. Ogled na lokaciji je možen. Dksdpfx Aozb Nlwjb Hon

Stanje: rabljeno, Leto izdelave: 2006, · Working area: 2,650 x 1,240 mm · Travel path X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure consists of a monolithic design made from thick-walled steel. It is reinforced with welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing components features a wide base—this is the key to lasting precision and stability. The machine layout enables optimal workflow for the operator, even with minimal space requirements. This construction provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile aggregate carrier is built from a solid monoblock. It is positioned along the X-axis with prismatically ground rails and recirculating ball carriages. On this mobile carrier, the working unit itself is mounted on similarly ground, prismatic rails with a recirculating ball carriage. Description of aggregates and accessories (base configuration): Drilling Unit: Drilling head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Drill holder: M10 with 11 mm fitting Grooving Saw Unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main Milling Unit (Position 2): · Tool holder: HSK 63F · Speed: 1,500 - 24,000 rpm, stepless via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation Dodsx Twccjpfx Ab Hokn · Ceramic bearings · Includes: 4 tool holders (right side) without collets Tool Changer R8L: Automatic tool changer for 8 tools, mounted on the rear aggregate carrier for quick access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight all tools: 22 kg · Slot for one angle gear · Travels with X-axis Horizontal Milling Unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 - 18,000 rpm, stepless via inverter · 1 output for collet 3–20 mm (ER32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. cutter diameter front milling: 20 mm · Max. cutter length front: 110 mm · Max. cutter diameter rear: 12 mm · Max. cutter length rear: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work Table: The worktable is designed to guarantee maximum freedom of movement for the operator. The vacuum quick-clamping system provides maximum flexibility, precise positioning, and optimal holding of workpieces. · 6 supports, 1,000 mm, stepless, pneumatically adjustable in X · 12 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 6) · Retractable reference stops are CNC-controlled · Pendulum processing standard (2 work zones) --- Other clamping systems optionally available --- Axis Movement: Drive system in X, Y, and Z uses ground recirculating ball screws.

Stanje: rabljeno, številka stroja/vozila: 007965, Maks. širina panela: 1300 mm Maks. dolžina panela: 2500 mm Maks. višina sklada panelov nad tlemi: 1600 mm Dvižna zmogljivost: 50 kg Delovna zmogljivost: 8 ciklov/min Sistem premikanja: z vakuumskimi sesalnimi elementi Dkedpfx Absw Ic Ryo Hsn

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS climate test chamber for temperature and climatic tests in industrial, research, development, and quality assurance applications. Condition / Display: Used unit, optical condition as shown in the pictures. Display shows Manual Operation / Stop. Actual temperature: 16.59 °C Set temperature: 5.00 °C Actual humidity: 39.7 % r.h. Water reservoir: 11.0 l Special feature: Extended temperature range up to +210 °C (many standard models only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % r.h. Dew point range: -10 °C to +94 °C Temperature rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerants: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on configuration) Equipment: Observation window Stainless steel test chamber Digital set/actual value display Specimen protection / temperature limiter Deionized water connection Condensate drain Tubing ports RS232 interface Digital outputs for specimen control Scope of delivery: CTS climate test chamber C-70/600 Scope of delivery as shown Dkjdey I Tdxepfx Ab Hen Service / preparation: Function test and replacement of necessary components Recharging with legally compliant refrigerant (if necessary) Leak test with certificate Documented test run Miscellaneous: Inspection by appointment possible Loading can be organized Commercial sale – sold without warranty. (Subject to change and errors)

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Application in research, development, and quality assurance. Operating Status Display: Manual operation / Stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7% RH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration system Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber Dedpfx Aoy H H D Ajb Hskn Digital display of set/actual values Test specimen protection / temperature limiter Water connection (DI water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of delivery CTS Climate Test Chamber C-70/600 Documentation (if available) Service prior to delivery (optional) Function check Refrigerant service Leak test Trial run with protocol Condition Used. Please refer to pictures for condition. Note Used unit, sale without warranty. Inspection by appointment possible. Loading and transport can be organized on request. Subject to changes and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from CTS. Suitable for temperature and climatic testing. Intended for use in industry, research, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection rating: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C Dksdpfx Absy H Hl He Hsn PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test object protection / temperature limiter Water connection (deionized water) Condensate drain Pipe leadthroughs RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS climate test chamber C-70/600 Documentation (if available) Service before delivery (optional) Functional check Refrigerant service Leakage test Trial run with protocol Condition Used. Visual condition as shown in images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be organized upon request. Subject to prior sale and technical modifications. If you have any questions, please contact us.

Stanje: rabljeno, Brizgalni stroj ARBURG 420 C - 1300 350/350 Stanje: rabljeno / glej slike... Dkodpfsy Uzdgjx Ab Hon