Ticab Asphalt Recicling Machine Ra-800 nakup rabljenega (79.980)

Stanje: dober (rabljeno), Bosch Scara SR 800 robotski zglobni manipulator Proizvajalec: Bosch Št. naročila: 384291811 Serijska št.: 54400094 Maksimalna nosilnost na prirobnici prijemala: 5 kg Hod 3. osi: 480 mm Obratovalni tlak: 4-8 bar Teža: 100 kg Območje nihanja glejte diagram Montaža na osnovno ogrodje iz aluminijastih profilov. Stanje artikla: rabljeno Nwodpfx Ashtyznoh Ueg Roboti so bili vsi skladiščeni pri velikem avtomobilskem dobavitelju kot rezervni stroji za nadomestitev v primeru izpada, zato so v zelo dobrem stanju. Poleg približno 50 paternosterjev je na voljo še nešteto drugih strojev, kot so stiskalnice, roboti, peči, industrijski sesalniki itd. Delavniška oprema, delovne mize, vozički, orodje, viličarji in regali so na voljo v veliki količini. Skupno se razgrajuje in prodaja 24.000 m² proizvodnih površin. Oglejte si tudi naše druge ponudbe. Po nakupu je znesek zapade v plačilo v 7 delovnih dneh. Druge artikle – nove in rabljene – najdete v naši spletni trgovini! Stroški mednarodne dostave po povpraševanju!

Stanje: dober (rabljeno), Bosch Turbo Scara SR 800 Rotacijski robotski ročaj Proizvajalec: Bosch Št. naročila: 3842291811 Serijska št.: 469801012 Največja obremenitev na prirobnici prijemala: 100 N Nwedpfxeg A N Tdj Ah Usg Hod 3. osi: 320 mm Obratovalni tlak: 4–8 bar Teža: 100 kg Delovno območje zasuka Nameščen na osnovnem okvirju iz alu-profila. Stanje artikla: rabljeno Vsi roboti so bili pri velikem avtomobilskem dobavitelju skladiščeni kot nadomestni stroji za primer okvar, zato so v zelo dobrem stanju. Poleg približno 50 paternostrov je na voljo veliko dodatnih strojev, kot so stiskalnice, roboti, peči, industrijski sesalniki ipd. Delavniška oprema, delovne mize, vozički, orodja, viličarji in regali so na voljo v obilju. Skupaj se razstavlja in prodaja 24.000 m² proizvodnih površin. Oglejte si tudi naše ostale ponudbe. Po nakupu je znesek zapade v plačilo v roku 7 delovnih dni. Več novih in rabljenih izdelkov najdete v naši spletni trgovini! Stroški mednarodne pošiljke na zahtevo!

Stanje: rabljeno, Leto izdelave: 1982, Oprema: kabina, MB-Trac 800 Njdjxrivpopfx Ah Uowg Sredinski menjalnik Hidravlika Gozdarska oprema je bila nameščena šele po obnovi. Vozilo nikoli ni delalo v gozdu!

Stanje: zelo dobro (rabljeno), Visokokakovostno in zelo čisto stanje – dobro vzdrževana avtomatska linija za termo skrčno pakiranje, ki jo sestavljata stroj za termo skrčno pakiranje Lady Pack Auto 60 in tunel za krčenje Madax. Gre za zanesljivo industrijsko rešitev za pakiranje, primerno za širok spekter izdelkov, vključno s škatlami, tiskovinami, kozmetiko, živili in splošnim potrošniškim blagom. Stroj omogoča popolnoma avtomatsko delovanje, s čimer je idealen za učinkovito in enakomerno pakiranje v proizvodnih okoljih. Glavne značilnosti: • Proizvajalec: Lady Pack (Italija) • Model: Auto 60 • Avtomatski stroj za termo skrčno pakiranje • Vključen krčni tunel: Madax • Popolna linija za pakiranje • Industrijsko kakovostna zasnova • Enostavno upravljanje in vzdrževanje Stanje naprav: Stroji so v dobrem delujočem stanju. Bili so uporabljeni v proizvodnji in redno vzdrževani. Logistika: Stroji so na voljo za takojšnji prevzem. Omogočena pomoč pri nakladanju. Nahajajo se na Finskem. Dodatne informacije: • Primerno za industrijsko in komercialno pakiranje • Zanesljiva in preverjena tehnologija • Kompaktna in učinkovita linija Kapaciteta je višja v primerjavi s polavtomatskimi stroji. Nedpfxeywpabs Ah Ujwg Možnost priklopa in testiranja pred nakupom. Stroji so zelo čisti, dobro vzdrževani in pripravljeni za uporabo v proizvodnji. Ključne besede: Stroj za termo skrčno pakiranje Avtomatski stroj za skrčno ovijanje Lady Pack Termo krčni tunel Stroj za pakiranje L-zapiralec

Stanje: pripravljen za uporabo (rabljen), Italdibipack Polavtomatski stroj za ovijanje s skrčljivo folijo + Skrčljiv tunel Popolna linija za skrčljivo pakiranje – pripravljena za takojšnjo uporabo! Visokokakovostna italijanska linija za ovijanje s skrčljivo folijo znamke Italdibipack, sestavljena iz polavtomatskega ovijalnega stroja in ločenega tunela za skrčljivo folijo. Ta zanesljiv pakirni sistem je idealen za pakiranje izdelkov, kot so škatle, tiskovine, prehrambni izdelki, kozmetika, tehnično blago in številni drugi trgovski ali industrijski artikli. Stroji so trenutno nameščeni na euro paletah in so pripravljeni za takojšnji prevzem. Glavne značilnosti: • Proizvajalec: Italdibipack (Italija) Nwedpfxsywn Nbs Ah Ueg • Polavtomatski stroj za ovijanje s skrčljivo folijo • Ločen tunel za skrčljivo folijo • Popolna pakirna linija • Zanesljiva industrijska konstrukcija • Enostavni upravljalni paneli • Primerno za različne vrste izdelkov • Takojšnja dobavljivost Tehnični podatki: Skrčljiv tunel: • Višina odprtine tunela: 150 mm • Širina transportnega traku: 330 mm • Tip transportnega traku: rotirajoči trak • Napajanje: 3-fazno Stroj za ovijanje: • Polavtomatsko delovanje • Napajanje: enofazno Stanje: Stroji so v dobrem, rabljenem stanju in so bili uporabljeni v proizvodnji. Prodajajo se zaradi zaprtja prejšnje lokacije. Obe enoti sta že postavljeni na euro palete, kar omogoča enostavno natovarjanje in transport. Dostava: • Takojšnji prevzem mogoč • Stroji so pripravljeni za transport • Nahajajo se na Finskem Idealno za: • Podjetja za pogodbeno pakiranje • Proizvajalce hrane • Tiskarne • E-trgovino in pakiranje • Mala in srednje velika proizvodna podjetja Kontakt: Za dodatne informacije, slike ali dogovor o transportu nas kontaktirajte. Stroj je mogoče pred nakladom preizkusiti pod napetostjo. Cena po dogovoru za hitro sklenitev posla. Ključne besede: Italdibipack, stroj za ovijanje s skrčljivo folijo, skrčljiv tunel, ovijalec s skrčljivo folijo, tunel za skrčljivo folijo, L-zapiralni stroj, polavtomatski ovijalec s skrčljivo folijo, pakirni stroj, Smipack ovijalec s skrčljivo folijo, rabljeni stroj za ovijanje s skrčljivo folijo - prodaja stroja Italdibipack, skrčljiv tunel pakirni stroj, Smipack, Minipack Torre.

Stanje: novo, Leto izdelave: 2025, skupna širina: 780 mm, skupna dolžina: 1.240 mm, skupna višina: 1.330 mm, skupna masa: 480 kg, Stroj za odstranjevanje kablov CBR A3 je posebej zasnovan za odstranjevanje zunanjega izolacijskega materiala s kablov vseh velikosti, kar olajša odstranjevanje prevodnega materiala v notranjosti. Ta serija ponuja vrhunsko zmogljivost na; kable z jeklenim oklepom (SWA), kabli z dvojno jekleno prevleko, jeklene trakove, kabli, prevlečeni s PVC, kable, prevlečene s svincem, debeli kabli, prevlečeni z gumo, kabli, prevlečeni z najlonom, nizkokakovostni kabli, TT kabli in drugi. Posebej obdelana rezila z edinstveno zasnovo omogočajo dolgotrajno rezanje in odstranjevanje kablov poljubne dolžine, ne da bi se rezila obrabila. Vse električne in elektronske komponente v seriji CBR A3 so znamke Siemens. Naši izdelki so izdelani in certificirani v skladu s standardi CE in EAC. Tehnične specifikacije MOČ 5,5 KW dimenzije kabla 1-120 mm Nwjdpfx Ahoff H Ims Uog Hitrost rezanja 25 m/min DOLŽINA 1240 mm ŠIRINA 780 mm Višina 1330 mm TEŽA 480 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Root peeler AE-800, Allgemein: Der Wurzelgemüseschäler ist ein fortschrittliches Gerät, das speziell für das effiziente Reinigen und Schälen von Wurzelgemüse wie Kartoffeln, Ingwer und Karotten entwickelt wurde. Mit einer weichen Bürstenaufsatz kann er darüber hinaus empfindliche Früchte mit dünner Schale schonend säubern. Dieses Gerät zeichnet sich durch hohe Effizienz, fortschrittliche Automatisierung und exzellente Schälresultate aus. Es steigert die Produktionsleistung erheblich und senkt die Arbeitskosten, indem es Schalen schnell und effektiv entfernt. Der Wurzelgemüseschäler nutzt verschiedene Schältechnologien wie Dampfschälen, Scheuern und Bürsten. Diese Methoden gewährleisten eine gründliche Entfernung der Schale bei gleichzeitiger Erhaltung der Produktqualität und -integrität. Seine Vielseitigkeit ermöglicht die Anpassung der Schälstärke und der Methoden an verschiedene Gemüsegrößen und -sorten. Hauptmerkmale: • Effizientes Schälen: Ausgestattet mit rotierenden Hochgeschwindigkeitsbürsten und Impulsmechanismen sorgt der Schäler für eine schnelle und gründliche Entfernung der Schale. • Multifunktional: Neben dem Schälen kann das Gerät Gemüse reinigen, sortieren und schneiden und deckt damit unterschiedlichste Verarbeitungsanforderungen ab. • Anpassungsfähigkeit: Die Maschine lässt sich mit wenigen Handgriffen auf unterschiedliche Größen und Sorten von Gemüse einstellen. Nsdpfot Av Igex Ah Ujwg • Bedienerfreundlichkeit: Dank automatischer Steuerung ist die Bedienung, das Verständnis und das Management des Geräts unkompliziert. • Arbeitsersparnis: Der Einsatz dieses Schälers reduziert den manuellen Arbeitsaufwand erheblich und steigert damit die Gesamtproduktivität. • Hygienisch und umweltfreundlich: Hergestellt aus lebensmittelechtem 304er Edelstahl erfüllt die Maschine die Anforderungen an Lebensmittelhygiene, ist leicht zu reinigen und umweltfreundlich. Regelmäßige Reinigung und sachgemäßer Umgang sind notwendig, damit das Gerät reibungslos und sicher funktioniert und das Risiko von Unfällen durch unsachgemäße Nutzung minimiert wird. Insgesamt ist dieser Wurzelgemüseschäler eine robuste und vielseitige Lösung für die effiziente Verarbeitung von Wurzelgemüse und empfindlichen Früchten – ein unverzichtbares Werkzeug in jedem lebensmittelverarbeitenden Betrieb.

Stanje: rabljeno, Večglava rezalna linija TRA2000/7/7, proizvajalca MAIR Vključuje: 1) Paketni podajalnik z dozirnikom cev/cev 2) Večglavni rezalni stroj s 7 rezalnimi glavami 3) Večkratno izhodno žlebišče 4) Električna upravljalna omara z napajanjem in krmiljenjem Po naročilu je možno izdelati tudi: 5) Izvozna žlebišče z dvojnim izhodom 6) Nov električni upravljalni panel s frekvenčnimi pretvorniki za rezalne motorje 7) Pokrov za zaščito pred hrupom in za varnost Največja dolžina cevi: 7.500 mm Največja nosilnost: 2.000 kg Okrogle cevi (zunanji premer): 12 - 50 mm Kvadratne cevi (višina x širina): 12×12 – 40×40 mm Pravokotne cevi (višina x širina): 12×16 – 50×30 mm Nwodpfx Ajymaypsh Ujg Največja debelina: 2,5 mm Dolžina cevi za rezanje: 330 - 7.400 mm Število rezalnih glav: 7

Stanje: rabljeno, MULTI-HEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR + RA1 Manufactured by MAIR Nedpfx Asymax Eeh Uewg SCOPE OF SUPPLY 1. Loading table equipped with: - Motorized sling bundle loader for complete bundle loading - Side chain conveyor for feeding tubes individually - Upper support with vertical adjustment (prevents dual loading when working with small diameters) - Length stop and tube loader 2. TRA3000 cutting machine with: - 7 independent cutting heads - All cutting heads are independently liftable - Linear guideway with scale for cutting head positioning - Centralized tube transport system with produciton cycle adjustment 3. Individual collecting cradle RA1, including: - Independent cradles for collecting cut tubes - Lateral cradle dividers to adapt cradle length to tube length - Motorized endless slings for collecting soft tubes 4. Main electrical cabinet and operator control panel 5. Safety barriers around the machine, light curtains, and emergency line. Note: The owner installed safety barriers to ensure the machine complies with "safety conformity" standards. TECHNICAL SPECIFICATIONS Manufacturer: MAIR RESEARCH Model: TRA 3000/7/7/CAR + RA1 Annual maintenance: performed by MAIR Spain Maximum tube entry length: 7000 mm Bundle loader: 3 tons Maximum loading capacity: 3000 kg Round tubes (external Ø): 12-60 mm Square tubes (height x width): 12x12-50x50 mm (see note) Rectangular tubes (height x width): 12x16-60x40 mm (see note) Min.-max. thickness: 0.8 - 4.0 mm (depending on yield strength) Cutting lengths: 330-6900 mm Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380/50 V/Hz, 3 phases Compressed air: Must be supplied filtered and lubricated at 6 bar. Total installed power: Approx. 21kW – 50Amp

Stanje: rabljeno, MULTI-HEAD PIPE CUTTING MACHINE TRA3000/7/8, manufactured by MAIR Scope of supply: 1. Loading table with: - Motorized sling loader for loading a complete bundle - Side chain conveyor for feeding tubes one by one - Upper arm with vertical adjustment (to prevent loading two tubes at once when working with small diameters) - Longitudinal stop and tube loader 2. TRA3000 Cutting Machine: - 7 independent cutting heads - All heads can be raised independently - Linear guide with scale for positioning the cutting heads - Centralized tube transport system with production cycle adjustment 3. Double RA3 collection cradle, featuring: Nwsdpfeymaw Ujx Ah Ueg - Independent cradles for collecting cut tubes - Side spacers in the cradles to adjust the length to the tube - Endless motorized slings for gentle tube collection Note: The double cradle system allows packaging and strapping in cradle 1 while production continues, eliminating the need to stop the machine. 4. Main electrical cabinet and control panel. NOTE: - This machine has operated very few hours. - Mechanical condition is very good. - Only cleaning and repainting are required to be “like new.” Max. input tube length: 8,000 mm Bundle loader capacity: 3 tons Max. loading capacity: 3,000 kg Round tubes (outer Ø): 12–60 mm Square tubes (HxW): 12x12–40x40 mm Rectangular tubes (HxW): 12x16–50x30 mm Min.–max. wall thickness: 0.8–3.0 mm (depending on yield strength) Cutting lengths: 330–7,900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motor power: 2.2 kW Cutting disc diameter: 300 mm

Stanje: rabljeno, Automatic Packaging Machine MAIR, MPS RH150/D/4/SL & SIGNODE Automatic Strapping Unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL The MPS RH150/D/4/SL Pat. model automatically packs round tubes into hexagonal bundles. The machine enables automatic strapping operations at a fixed position, with the bundle laterally moved and automatically stopping at pre-programmed strapping positions. It consists of: - Four-tube chain conveyors with support teeth and intermittent drive for lifting one tube at a time from the threading machine to the alignment area. - A powered roller for aligning the tube against an adjustable end stop before forming the row. - Two holding areas for the tube row; necessary during the bundle evacuation cycle. - A robust welded structural steel frame, forming a bridge. - A tube row handling system that collects one row of tubes at a time from the second-row storage and places it on the bundle formation supports. - Handling is performed using a series of electromagnets that rotate during the row transfer cycle; - Four powered vertical supports for forming and holding the bundles. These feature adjustable blades according to the required size and shape of the bundle and lower to allow the bundle to be placed on the evacuation cart. - Powered evacuation cart sliding on rails fixed to the floor and equipped with powered lower rollers and pairs of free vertical retention rollers. - Powered flat conveyor for transporting the bundle after the strapping area. - Powered storage chains suitable for advancing the bundles to the selected count. - Draining station for lifting the bundle, allowing coolant to exit the tubes; equipped with two hydraulically operated devices powered by a hydraulic power unit. - Control cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred by the powered rollers of the evacuation cart to the automatic strapping system. It stops at programmed strapping positions to allow the automatic application of steel strapping. It consists of: - SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping - Pneumatic floating strapping head for 32 mm (1¼”) wide steel strap with 0.9 mm wall thickness; - 450 kg strap dispenser with electric payoff - Control panel 3. WEIGHING STATION, model KG8/DY The station weighs tube bundles using load cells. Powered storage chains transfer the bundles into the weighing position. The weighing station is located below the pneumatic lifting devices that raise the bundle for weighing. It consists of: - Lower frame for floor fixation, complete with four supports, couplings, and load cells - Upper clamping frame, able to receive the bundle lifting devices - Compact weight transmitter 4. SOFTWARE, model DATAPACK 3/T Nsdpfx Ahsymahye Uswg The Datapack Management System software enables the operator to: - Monitor and supervise tube production in real time - Set new bundle configuration according to the required parameters

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Complete plant with primary impact crusher, feed opening 2320x1700 mm, mobile. Nwodelwya Nepfx Ah Ueg Production capacity: 800 tons/hour, output 0-40 mm, limestone. Secondary stage consists of two Laron Lau 8 hammer mills, feed opening 1620x700 mm.

Stanje: rabljeno, SIGNODE AUTOMATIC STRAPPING STATION, Model M400 The completed package is automatically transferred via the motorized rollers of the evacuation carriage to the automatic system. It stops at the programmed strapping positions to allow the automatic application of steel straps. Nwjdpfx Ahswxxz Rj Usg The system consists of: - SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping - Pneumatic floating strapping head for 32 mm (1¼") wide steel strap, 0.9 mm wall thickness - 450 kg strap dispenser with electric uncoiler - Control panel SIGNODE automatic strapping machine: Model M400/PA/TSM for vertical strapping Pneumatic floating strapping head: for 32 mm (1¼") wide, 0.9 mm wall thickness steel strap 450 kg strap dispenser: with electric uncoiler Control panel: Included

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2011, MINIPACK-TORRE SC55 – STROJ ZA SKRČNO OVITJE Nwsdpfxswu Hczs Ah Usg LETO 2011

Stanje: rabljeno, Leto izdelave: 2018, skupna višina: 4.000 mm, skupna dolžina: 5.100 mm, skupna širina: 3.800 mm, skupna masa: 20.000 kg, POS POSmill H 800 U 5-Axis Machining Center features a swiveling axis in the range of -120° to +120° and a rotary table with an infinitely rotating 360° C-axis. A separate A-axis is not included. The working area is equipped with a high-quality Kessler rotary table with a diameter of 800 mm; a pallet changer is not installed. Particular highlights include the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. Combined with the integrated 50-bar through-spindle coolant system, the machine is perfectly suited for demanding applications in tool and die manufacturing and the automotive sector. Operating Data: Control power on: approx. 25,280 h Machine power on: approx. 24,730 h Program run: approx. 9,150 h Spindle running hours: approx. 8,555 h Spindle speed: 18,000 rpm Y-axis travel: 820 mm Dimensions (LxWxH) approx.: 5,100 x 3,800 x 4,000 mm Weight approx.: 20,000 kg Control: Heidenhain ITNC 530 Z-axis travel: 600 mm Nwedoy An A Espfx Ah Ueg X-axis travel: 670 mm 5-axis machining: Yes Year of manufacture: 2018 Condition: fully functional Payment Terms: 100% prepayment before collection Delivery Terms: Ex-foundation Under power: Yes

Stanje: rabljeno, Radial drilling machine with platen table WEBO type HRH 100 / 3000 Machine no. 10009555/7 -- 1110185 -- 6046 Year of manufacture: 1979 Drilling capacity Ø 100 mm in ST 60 at feed 0.5 mm/rev Nominal arm reach 3000 mm Maximum arm reach max. 3100 mm Spindle taper MT 6 Spindle speed 22.4 - 1600 rpm, 36 steps Feed 0.05 - 2.5 mm/rev, 18 steps Distance spindle - base plate 970 - 2335 mm Quill stroke 325 mm Boom swing range 360° Travel on bed, bed length 7500 mm Clamping surface of platen field 8000 x 2100 mm - Electric central clamping - Drilling unit movable longitudinally on the machine bed by electromotor - Platen field made of 2 clamping plates with 7x T-slots (length 4000 x width 2100 x plate thickness 360 mm) Required space (L x W x H) 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 t Transport dimensions platen field (L x W x H) 4000 x 2100 x 900 mm (2 plates stacked) Transport weight platen field approx. 14 t Good condition Nedpfx Ahofbt Hue Uewg

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 98 20 262, Tehnični podatki na kratko GEISS, Seßlach Tip 2800 x 1400 Leto izdelave 1998 Krmiljenje Siemens Sinumerik 840. Delovno področje cca. 2.800 x 1.400 mm Osi: 5-osna obdelava (B- in C-os v glavi rezkalnega stroja) Moč 43 kW Teža cca. 5.900 kg Priključek 400 V / 66 A / 50 Hz Prej bila tandem različica. Tandem različica je bila strokovno deaktivirana. Obratovalna. Stroj si je mogoče ogledati kadarkoli. Razstavljanje in nakladanje na lastno odgovornost. Njdpfxjyim Szo Ah Ujwg

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: ET223, Used labelling machine AXTRA 720-H9SA4 up to 8000 bph General configuration and operational performance The used labelling machine AXTRA 720-H9SA4, with a capacity of up to 8000 bottles per hour, provides powerful in-line labelling for glass containers and can be configured for PET or other packaging materials upon request. This refurbished labelling machine ensures reliable and precise operation in industrial environments that require consistent labelling quality. Specifically, the AXTRA 720-H9-SA4 model achieves speeds of up to 8000 containers per hour, depending on sample confirmation by the customer. Operating direction and functional layout The machine operates clockwise, with containers entering from the left and exiting right relative to the conveyor. This configuration supports integration with most standard filling lines found in modern production environments. Additionally, operators can easily adapt the layout to existing upstream and downstream installations. Labelling system and roll handling The used labelling machine AXTRA 720-H9SA4 up to 8000 bph features three non-stop labelling stations designed for 400mm rolls and one standard station for 300mm rolls. Each station is equipped with sensors for accurately detecting opaque labels, ensuring precise placement even with low-transparency materials. This guarantees consistent labelling quality across different formats. The machine accommodates container sizes with diameters from 45 to 115 mm and heights from 180 to 330 mm. Precision engineering and integrated settings The machine employs electromechanical plates to guarantee high operational precision. Additionally, an electric vertical adjustment system for the upper carousel allows the operator to perform quick format changes with minimal downtime. This automation improves productivity and reduces manual intervention. The system also includes a pre-installed optical centring system for accurate alignment with containers bearing printed reference marks, ensuring high visual consistency of label placement. The machine supports continuous production with 9 active plates, maintaining constant throughput and reducing interruptions. Nwsdpfjw Az Dijx Ah Uog Compatible materials and reconfiguration options Currently, the machine is configured for labelling glass containers, but our team can modify it upon request to handle PET or other materials. We can also adapt the system for different container shapes and label types.

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Funk F800 Flake Ice Maker, year 2021, with an output of approximately 700 to 800 kg of ice per 24 hours. The machine was in use for only about 3 years and still has its protective film attached (see photo). Ultrafine flake ice is scraped from an internally cooled evaporator drum, making it ideal for incorporation into dough without clumping and providing excellent cooling performance. Features the patented 'Funk EasyClean' system for simple cleaning, satisfying high international HACCP standards. The stainless steel cover can be easily removed to access all parts requiring cleaning; the unit complies with DVGW regulations. Simple, manual operation with no electronics or computers required; manual rinse function included. The machine is fully functional and perfectly suited for regulating dough temperature during warmer periods by adding flake ice. The ice does not cause (mechanical) problems in dough mixers. Ready to connect (plug & play) and mobile on swivel castors. Nwsdpfxey T Eg Ns Ah Uog Refrigerant: R 449 A, electrical connection rating: 2.3 kW Dimensions: approx. 100 x 80 x 100 cm (W x D x H), weight approx. 220 kg.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, 🥟 AUTOMATIC DUMPLING MACHINE – HIGH OUTPUT Professional, automatic machine for the production of dumplings, samosas, empanadas, and other filled products – ideal for: - restaurants - catering companies - medium and small production facilities - commercial kitchens This dumpling machine will significantly accelerate your production, reducing manual labor and increasing overall efficiency. ⚙️ TECHNICAL SPECIFICATIONS - Output: approx. 4500–4800 pcs/h - Power supply: 220 V / 110 V - Power: 1.5 kW - Material: food-grade stainless steel - Dimensions: 650 × 450 × 800 mm - Weight: approx. 120 kg - Condition: new, 12-month warranty ✅ KEY ADVANTAGES ✔ Fully automatic – minimal operation required ✔ Fast production of dumplings and other filled shapes ✔ Stable and robust construction suitable for continuous operation ✔ Materials compliant with food safety standards ✔ High production efficiency Nodpfx Aheyhh Nnj Uowg 🚚 DELIVERY INCLUDED 📦 Shipping at no additional cost within Poland. Safe delivery to the specified address available. 💼 ADDITIONAL INFORMATION - Made to order - VAT invoice - One forming die of your choice included free 📹 Additional information: - Individually tailored orders - Video demonstration of the machine available - Brand new, professional equipment

Stanje: dober (rabljeno), Leto izdelave: 2017, Manufacturer: MIBA Type: NC Milling Machine Control: Siemens TOUCH Year of manufacture: 2017 Z Axis: 1100 mm X Axis: 1310 mm C Axis: Endless Working range stage 1: 4000 - 8500 mm Working range stage 2: 4000 - 11,500 mm Specifications Metric US Standard There are (currently) no specifications available for this machine. Dimensions (Estimated) Length: 14,400 mm Nwjdpfx Aowq Hwdsh Usg Width: 12,000 mm Height: 6,000 mm Weight: 24,000 kg Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Bordirni stroj LUCAS - RD-3800 R ID stroja: 9280 Proizvajalec: LUCAS Tip: RD-3800 R Krmiljenje: Siemens Simatic Nwjdexta E Rspfx Ah Usg Leto izdelave: 2014 Največji premer: 3800 mm Najmanjši premer: 710 mm Debelina 40 N/mm² do 6 mm Debelina 30 N/mm² do 8 mm Debelina 70 N/mm² do 5 mm Višina robu: 90 mm Delovna hitrost obdelave robov: 0–20 m/min Delovna hitrost rezanja: 0–30 m/min Komplet orodij vključen Prosimo, upoštevajte: Informacije na tej strani so bile po najboljših močeh pridobljene iz naših podatkov in, kadar je bilo mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar njihova natančnost ni zagotovljena. Zato ne predstavljajo formalne izjave ali pogodbenega pogoja. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: dober (rabljeno), Leto izdelave: 2014, skupna širina: 600 mm, skupna dolžina: 1.000 mm, skupna višina: 600 mm, Manufacturer: MIBA Model: RNF-65 Year of manufacture: 2014 Milling cutter laser-guided Njdpfewq Hp Tox Ah Uowg Working range: 2000 - 8000 mm Designed for mobile use on 3000 mm gauge Specifications Metric US Standard No specifications are (yet) available for this machine. Dimensions (estimated) No dimensions are (yet) available for this machine. Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute any representation or contractual terms. We recommend verifying all important details independently.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 3.100 mm, pomik po osi Z: 1.600 mm, hitrost pomika os X: 25.000 m/min, hitrost podajanja osi Y: 25.000 m/min, hitrost podajanja os Z: 25.000 m/min, največja hitrost vretena: 4.000 obr/min, dolžina mize: 8.000 mm, širina mize: 2.500 mm, obremenitev mize: 15.000 kg, Chain-type tool changer with 80 positions Rotary table 1500 x 1500 mm with V-axis 1500 mm Table load capacity: 15,000 kg Optional box table 3500 x 1000 x 1000 mm Electrically powered X-axis travel: 8,000 mm Y-axis travel: 3,100 mm Z-axis travel: 1,600 mm Table length: 8,000 mm Table width: 2,500 mm Table load capacity: 15,000 kg Spindle power: 43 kW Spindle speed: 4,000 rpm Tool holder: 50 ISO / BT / MK X-axis feed rate: 25,000 mm/min Y-axis feed rate: 25,000 mm/min Z-axis feed rate: 25,000 mm/min Control system: iTNC530 Nodpfxsxm Suds Ah Ujwg Milling head auto-index: 2.5 x 2.5° Length: 14,000 mm Width: 6,000 mm Height: 6,000 mm Weight: 68,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Nwjdpfx Aherx Rxtj Usg Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg