Tarča Za Napraševanje nakup rabljenega (97.532)

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: Minimum temperature: 1 °C Maximum temperature: 199 °C Electrical specification – Voltage/Frequency: 380 / 50 V/Hz Hedpfx Aiou Nw E Ueqou Heating capacity: 1.8 kW (1800 Watts) Protection class: IP 54 Total power requirement: 16.2 kW Machine weight approx.: 0.93 t Dimensions (L x W x H): 2.85 x 2.0 x 1.4 m Pre-polymerization Tunnel – Heat Treatment Tunnel Application: Drying for washing and painting lines – continuous operation Sold as is and as described! Additional features: - Manufacturer's recommended maximum temperature: 80°C; safety setting: 90°C; heater: 230V - With chain conveyor/feeder line made of Teflon - Chain width: 200 mm - Maximum workpiece width: 150 mm Pass-through (W x H): 150 x 110 mm, conveyor height: 600 mm; drive: SEW Eurodrive motor (gear motor) output 0.18 kW Loading opening (W x H): 500 x 800 mm Discharge door (W x H): 600 x 1200 mm Access door (W x H): 800 x 980 mm with safety interlock Interior height: 1400 mm

Stanje: rabljeno, Technical Details: Grinding table: Tilt: none degrees Power supply: 220 V Approx. machine weight: 44 kg Space requirement approx.: 0.3 x 0.45 x 1.1 m Right disc: Ø 150 mm x W: 50 mm; disc equipped with abrasive flaps Left disc: Ø 125 mm x W: 50 mm; disc equipped with abrasive flaps Bilateral support Machine mounted on stand with base plate. Operation via on/off switch Hodpfx Aiou Ng Sqjqju

Stanje: rabljeno, Technical details: Saw blade diameter: 420 mm Maximum cutting length: 5000 mm Cutting range (H x W): 180 x 100 mm Required air pressure: 6 bar Hsdpfeu Nigwjx Aiqsu Mitre cuts on both sides: 45° - 90° (manual) Operating voltage: 380 / 220 V Total power requirement: approx. 8.0 kW Machine weight: on request Machine dimensions (L x W x H): approx. 6.4 x 1.3 x 2.0 m Circular saw with 2x sawing supports for cutting profiles with mitre cuts up to 45°. Microprocessor positioning control BECKHOFF E 70-300 with absolute encoder Digital display Travel distance per sawing support = 2350 mm, motorized Clamping cylinder for each horizontal and vertical axis, manual Spray device Hydropneumatic feed Use of carbide tipped saw blades

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 Hodpfxjvc Akls Aiqju A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2001, Technical Details: Grinding length: 2,500 mm Grinding width: 800 mm Workpiece height: 800 mm Table movement horizontal, longitudinal stroke: 2,700 mm Table movement horizontal, cross stroke: 800 mm Table speed: longitudinal: 1 - 35 m/min / cross: 0 - 3 m/min Feed rate: vertical: 0.001 mm/stroke / cross: 0.0025 mm/stroke Magnetic chuck size: 2,500 x 800 mm automatic grinding wheel infeed: 0.001 mm Distance table to spindle center: 900 mm Grinding spindle speed: n/a rpm Grinding wheel dimensions: 400 x 76 x 127 mm Total power consumption: 36 kW Machine weight approx.: 13.5 t Machine dimensions (LxWxH): approx. 7.5 x 2.8 x 2.7 m Cooling system dimensions (LxWxH): 1.8 x 1.0 x 0.92 m Hydraulic system dimensions: 1,900 x 800 x 1,500 mm Transport dimensions machine (LxWxH): 8.0 x 2.4 x 2.85 m The machine is currently located in the technical department! Equipment: - Currently mounted grinding wheel = Ø 340 x 81 mm Hodevbgr Repfx Aiqsu - Hydraulic unit - Dressing device - Separated working area (2-sided sliding door) - Machine interior lighting Accessories: Various grinding wheels Ø 400; Ø 310; Ø 300 as well as Ø 200 mm Various magnetic inserts and filter cartridges

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. Hjdpfju Id H Aex Aiqsu About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Rotary Table: Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Best regards.

Stanje: rabljeno, Tehnične podrobnosti: Premer obdelovanca nad posteljo: 340 mm Premer obdelovanca nad podpijo: 190 mm Dolžina obdelovanca: 700 mm Razdalja med centri: 700 mm Število vrtljajev: 55–2350 vrt/min, 8 stopenj, mehanska nastavitev Premer vretena: 50 mm Nastavitev nosilca vretena: 120 mm Hjdpfou Ixw Aex Aiqeu Nosilec vretena: MK3 mm Navor na vretenu: 350 Nm Največja teža obdelovanca: 50 kg Skupna poraba moči: 3,0 kVA Teža stroja: približno 0,79 t Dimenzije stroja (približno D x Š x V): 1,6 x 0,9 x 1,4 m Stroj je bil redko v uporabi, v popravilni delavnici. 3-čeljustna glava Forkardt, premer 200 mm (zunanje vpenjanje) Pomik vzdolžne sani, X-os: 600 mm; pomik vzdolžno 0,045 – 0,787 mm pri 20 stopnjah; metrični navoj Pomik prečne sani, Y-os: 220 mm; pomik 0,023 – 0,406 mm pri 20 stopnjah Zgornja sana, nagib desno 60° in levo 120° Rezanje navojev Osvetlitev stroja Brez dovoda hladilne tekočine (pripravljeno za namestitev) Dodatna oprema: 3 kompleti vrtalnih glav 3 x držalo orodja Multifix 2 x vrtalna glava 1 x vodilni konični nastavek 3 kosi strojne podlage

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: Swing diameter over bed: 460 mm Swing diameter over carriage: 388 mm Turning length: 1016 mm Centre distance: 1016 mm Centre height (measured in bed): 230 mm Hjdpfx Aeu Ixzbsiqeu Swing diameter in gap: 640 mm Spindle bore: 52 mm Spindle speed range: 30 - 2000 / 12 steps rpm Feeds – longitudinal: 0.032 - 0.898 mm/rev Feeds – cross: 0.016 - 0.449 mm/rev Tailstock quill taper: MK 4 Tailstock quill travel: 120 mm Total power requirement: 3.75 kW Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.5 m Switchable gear transmission 3-axis digital readout system Quantum Compound slide adjustment +/-90° Quick-change tool post Multifix 3-jaw chuck, Ø 200 mm Live centre in tailstock Thread cutting: inch threads, metric threads, trapezoidal threads, module threads Accessories: Change gears, machine feet, 1x fixed centre

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Hsdpeu Ix Arsfx Aiqou Swing diameter over bed: 1000 mm Swing diameter over saddle: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Length of gap: 800 mm Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Hodpfx Aou Ix D Asiqsu Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: rabljeno, Leto izdelave: 2025, Tehnične podrobnosti: Prostornina: 1000 m³ Izkoristek v barih: 11 Skupna potrebna moč: - kW Prostornina posode: 1000 l Delovni tlak: 11 bar Hjdpfey I Rr Tex Aiqsu Dimenzije stroja, približno V x Š x G: 2,32 x 0,8 x 0,8 m Teža: 260 kg • Funkcija: Služi kot odziralnik in medij za shranjevanje v postajah za stisnjeni zrak, ločuje kondenzat in zmanjšuje pogostost vklapljanja kompresorja. • Standardi kakovosti: Izdelano v skladu z evropsko direktivo o tlačnih napravah (2014/68/EU) ali 2014/29/EU (enostavne tlačne posode) ter smernicami AD 2000. • Zaščita površine: Običajno je notranja in zunanja površina vroče pocinkana po standardu DIN EN ISO 1461 za maksimalno zaščito pred korozijo in dolgo življenjsko dobo. • Delovni parametri: Zasnovano za temperature od -10 °C do +50 °C (delno do +80 °C) in standardni delovni tlak 11 bar ter preizkusni tlak 16 bar. • Izvedba: stoječa izvedba z varjenimi vzdolžnimi in obodnimi varjenimi spoji.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Naprava za rokovanje s plošči. Hedpfx Asz Dp Rhoiqju

Stanje: rabljeno, Technical details: Table length: 865 mm Table width: 780 mm Table height: 40 mm Height above floor: approx. 815 mm Machine weight approx.: 140 kg Space requirement approx.: 0.87 x 0.8 x 0.82 m Hsdpou Nkn Asfx Aiqju Marking-out plate – Surface plate Marking-out plate with 3 legs

Stanje: rabljeno, Technical details: Hjdpfxou Nkrne Aiqju Length: 640 mm Width: 465 mm Thickness of clamping plate: 90 mm Approximate machine weight: 70 kg Marking plate – Surface plate – Steel plate

Stanje: rabljeno, Technical details: Number of drawers: 6 units Tool holders: 36 units Dimensions HxWxD: 930x710x650 mm Weight: approx. 20 kg The cart is suitable for tool holders SK40 and/or SK50. Organize as you wish! Hodpfx Aieu Nkyloqju Sale without tools shown in the pictures. As per illustration. *

Stanje: rabljeno, Technical details: Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m BRUSHING MACHINE for deburring / brushing pipe ends / welded profile tubes / pipe bodies on the face side Hedpfx Aowiu Smjiqsu

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Premer cevi: 6 mm Maks. premer cevi: 16 mm Maks. kotni upogib: 90 ° električna izvedba – napetost/frekvenca: 220 / 50 V/Hz Skupna priključna moč: 0,75 kW Teža stroja cca.: 0,145 t Dimenzije stroja D x Š x V: cca. 1,0 x 0,8 x 1,2 m Področje uporabe: Hjdewivn Nopfx Aiqou Mini cevni upogibalnik s prostim upogibnim vodilom. Obdelava preciznih jeklenih cevi po DIN 2391/C, material 35.4 NBK Ø 6 - 16 mm. -s hidravličnim pogonom -8x predizbor upogibnih kotov do 180° -cevni prislon 1 m gumb za zaustavitev v sili -pomični z nožno zavoro -vrtalna glava nihajna (navpično v vodoravnem položaju) potrebno hidravlično olje = cca. 20 litrov (npr. Esso Nuto 32) Pribor: različna orodja za upogibanje

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Hjdpfx Aievvvrpeqeu Operating pressure: 12 bar Tank volume: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sand blasting unit Pressure of blast vessel up to 12 bar Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Including 10 m nozzle hose (internal diameter)

Stanje: rabljeno, Leto izdelave: 2006, Technical Details: Workpiece weight: 1.1 t Control system: RobAssist via makro-Technik / VME-Bus-CPU Rotary table: Ø 800 mm Rotary table swiveling: 370° Table tilting: 115° Total power requirement: 35 kVA Total weight approx.: 4,000 kg Dimensions (L x W x H) Robot: approx. 2.5 x 4.5 x 3.8 m Dimensions control cabinet: approx. 600 x 800 x 2,200 mm Hedpfx Aiovzq Hreqou Dimensions (L x W x H) Extraction unit: approx. 0.7 x 0.8 x 2.7 m Dimensions (L x W x H) Rotary module: approx. 1.4 x 1.4 x 1.1 m The system is currently located in the technical department. Welding robot system consists of: - Gantry with robot: Reis Robotics, RVL20-16, 3.3 kVA, maximum reach approx. 1,600 mm, speeds: Axis 1: 3 m/sec, Axis 2: 185°/sec, Axis 3: 150°/sec, Axis 4: 450°/sec, Axis 5: 450°/sec, Axis 6: 500°/sec - 2x columns: Centre distance 3,300 mm, columns on base plate 900 x 900 mm; column diameter Ø 350 mm - Rotary/tilt table module: Model RIS, Type RDK11 Max. torque tilt axis = 4,200 Nm and rotation axis 2,200 Nm Speed tilt axis = 19°/sec and rotation axis 45°/sec - Welding power source: Fronius, Type TPS 2700; Welding current range: MIG/MAG 3-270 A, electrode 10-270 A, TIG = 3-270 A; protection class IP 23 - Fume extraction unit: Teka, Type DUST Buster DB-302 R, max. air volume flow 300 m³/h, filter class Category C, filter surface 2.2 m² - Cooling unit: Type FK 4000 R, output 2 kW, protection class IP 23, pressure 4 bar Equipment: - Safety light curtain with transmitter and receiver - Teach pendant

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) Hsdpfx Aiev A Sqheqsu MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Stanje: rabljeno, Leto izdelave: 2010, Technical details: Machine weight approx.: 1,400 kg Machine dimensions approx. LxWxH: 6.6 x 0.9 x 3.8 m Total power requirement: 0.75 kW Manufactured from robust sheet steel construction. This is a scraper belt conveyor. Feed width: F1 = 480 mm; Feed length: 750 mm Discharge: Height = 3,200 mm Infeed (underfeed to the machine): Height = B = 370 mm + superstructure 300 mm = 670 mm, width F = 580 mm, length A = 2,230 mm Hedpeu Nun Hefx Aiqju The chip conveyor is to be positioned stationary.

Stanje: rabljeno, Technical details: Belt width: 135 mm Conveying height: 1020 mm Control voltage: 380 V Approx. machine weight: 165 kg Approx. machine dimensions (LxWxH): 3.3 x 0.5 x 1.5 m Scraper belt conveyor made of sheet steel construction Additional technical specifications: - Profile height (B1): 160 mm - Profile width (F): 300 mm - Chip inlet width (F1): 160 mm - Chip inlet length (A): 1700 mm Hedou Nuquopfx Aiqeu - Floor clearance (I): 20 mm - Discharge length (D): 200 mm - Discharge height above floor (C): 1020 mm - Discharge width: 200 mm - Insertion/underfeed length (A): approx. 2000 mm - Insertion height (B): 180 mm Operation via hand switch Rotating scraper brushes at the discharge and laterally on the left/right of the feed bar

Leto izdelave: 1971, stanje: rabljeno, Technical details: Max. gear diameter: 300 mm Hodpfxsvc Apbo Aiqeu Max. module: 5 Min. module: 0.5 Max. workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions: 1800 x 1850 x 2500 mm Control cabinet dimensions No. 1: 1930 x 400 x 1920 mm Control cabinet dimensions No. 2: 800 x 230 x 1950 mm Dimensions of exhaust system: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine For modules up to 5 and diameters of 240–300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30` Max./min. helix angle at 24 teeth: 6000 / 200 mm Max. double-sided helix angle: 45° Grinding worm speed: 1900 rpm Without dressing device Equipment: Approx. 77 various change gears, tube extensions and assorted accessories Two of these machines are available for sale. Both machines are supplied via two shared control cabinets and an exhaust system.

Stanje: rabljeno, Leto izdelave: 1995, Technical details: Table size: 920 x 620 mm Voltage: 220 / 50 V / Hz Total power requirement: 0.77 kW Machine weight approx.: 0.11 t Dimensions (L x W x H): approx. 0.92 x 0.62 x 0.80 m STRAPPING MACHINE – Semi-automatic Suitable for plastic strapping (approx. Ø 500 x 17 mm) Strap dispenser located in the machine base cabinet Tabletop made of 1.5 mm folded chrome sheet Hodsvc Axcopfx Aiqou With adjustable stop (L x W x H: 345 x 80 x 20 mm), adjustment range approx. 32 mm Tension setting via indicator on linear scale The packaging machine is mobile and easily movable, equipped with 4 swivel castors (2 of which are braked).

Stanje: rabljeno, Leto izdelave: 1989, Technical details: Table length: 1600 mm Table width: 920 mm Height above floor: 200 mm Approx. machine weight: 0.69 t Clamping table with 4 through-holes, Ø 22 mm Material: cast steel T-slots according to DIN 650: T-slot pitch: 250 mm T-slot edge distance (right and left): 120 mm Hedpfsu N Ebqjx Aiqsu a = 22 mm; h = 38.5 mm; b = 40 mm; c = 18 mm T-slot length = 1380 mm