Systemtechnik Hölzer Gmbh Depanelizacija / Obdelava Tiskanih Vezij nakup rabljenega (72.448)

Stanje: zelo dobro (rabljeno), Professional electric motor by the renowned German manufacturer AC-Motoren GmbH. Robust design intended for continuous operation in machines, pumps, fans, gearboxes, and industrial equipment. The motor is in good visual and technical condition. Flange-mounted (B5) type. Shaft with keyway. Technical data: • Manufacturer: AC-Motoren GmbH • Type: FCA 112M-4 • Power: 4.8 kW • Supply: 3~ / three-phase • Speed: 1440 rpm – 50 Hz • Speed: 1728 rpm – 60 Hz • Voltage 50 Hz: 380-420V / 660-720V • Voltage 60 Hz: 380-480V / 660-830V • Current: 8.36 A / 4.82 A • Cos φ: 0.82 • Duty cycle: S1 • Protection class: IP55 • Standard: IEC 34-5 • Mounting: B5 flange • Shaft diameter: 28 mm • Shaft length: approx. 62 mm • Shaft with keyway • Aluminium housing Kedpfx Asy Rr Inoh Uelt Applications: • Pumps • Fans and blowers • Production machinery • Gearboxes and drives • Workshop equipment Condition: Used item, shows normal signs of use and storage. The motor is in very good visual condition. Included: • Motor as shown in the photos

Stanje: novo, številka stroja/vozila: 0770, lastna masa: 2.800 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 640 mm, velikost pnevmatike: 450x300x305, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, obratovalna teža: 22.800 kg, Transportni voziček TPW 20 AL-AS Tip: TPW 20 AL-AS Nosilnost: 20.000 kg Letnik izdelave: 2025 Ksdpfxshbh Rtj Ah Uslt Dimenzije: Dolžina nakladalne površine: 6000 mm Širina: 2000 mm Višina: 620 mm Transportno dno: 40 mm douglasija Krmiljenje: Vse kolesa vodena – krmilna os Pnevmatike: 450x300 obroči s kovinskimi platišči in dvosmernim stožčastim ležajem Vlečna ruda: 1.600 mm z vlečno zanko 40 mm in varovalom proti izpadu Barva: RAL 2000 Po 6 pritrdilnih blokov na vsako vzdolžno stran za varovanje tovora Dvojno delujoča stabilizacijska naprava montirana na okvirju #Prevoz težkih tovorov #Notranji transportni sistemi #Prikolica za težka bremena 6–100 ton #Težkotovorne prikolice od 3 do 100 ton #Težkotovornična platforma #Platformne prikolice za težka bremena #Vse kolesa vodeno #Transportni voziček #Nizkopodna platforma

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: System-S/N: H 01 07 000-1 / Motor-S/N: 0141708310002, skupna masa: 1.200 kg, The Pregler hydraulic power unit is a reliable and high-performance solution for supplying hydraulic systems in various industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit offers flexible application possibilities and can be easily integrated into existing systems, providing a long service life thanks to its durable construction. Klodpfowtgwiox Ah Ujt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, We are offering a used rotary indexing table by Weiss. The rotary table features a load capacity of approx. 30 tons, a diameter of roughly 3.5 meters, and a net weight (including motor) of around 6,500 kg. The control unit for the rotary table is included as well, equipped with an SEW frequency inverter, braking resistor, etc. All documentation is available. Klodpfxeni Awpe Ah Ujt

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026-078, delovna širina: 1.600 mm, delovna višina: 100 mm, največja širina rezanja: 1.600 mm, število mest v zalogovniku orodij: 2, Used CNC Cutter/Plotter Cutting area in X and Y: 1,500 x 1,600 mm (demonstration machine) Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Equipment included with the used machine: • 1 cutting gantry and 1 multifunctional tool head • Multifunctional tool head for mounting 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard equipped with a grey conveyor belt table • Maximum material height: 100 mm Additional tool options available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT powered rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angled cutting knife • Printer mark recognition • Camera registration • Punch tool for notches or holes • Router with extraction unit User-friendly design: • Easily exchangeable cutting tools, "PLUG & CUT" • Intuitive user interface • Quick blade change • Vacuum zones can be activated with one click Rapid return on investment: • Low operating costs with high added value • Optimal material utilization with nest expert software modules (not included) • High-speed performance • Consistent precision Technical data: • Short cutting times due to high positioning speed up to 90 m/min • Repeatability: +/- 0.25 mm • Single or multi-layer cutting • Suitable for both sheet and roll materials (expandable with roll off unit) • Fast return on investment (Product image for reference) Kjdpewgc I Rofx Ah Uslt The machine is CE-certified.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 45 h, številka stroja/vozila: 202023-062, Multifunkcijski CAM sistem za razrez s tehnologijo čistega vodnega curka – brez abrazivov (stroj za rezanje z vodnim curkom). 2 rezalna portala z 2 rezalnima glavama, vključno z Z-osjo. 1 glava za 2D rez, 1 glava za 2D rez. Za razrez pene, plastike, tehničnih tekstilij in drugih ploščatih, prožnih, nemetalskih materialov. Največja višina obdelave: 140 mm. Površina razreza v X in Y osi: 2850 mm × 2750 mm. Razred zaščite: IP54. Vključuje visokotlačno črpalko BFT 40.22 (pribl. 650 delovnih ur). (Slika izdelka je primer) Stroj je CE certificiran. Kjdpfx Aewrn Iyoh Uslt

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 45 h, številka stroja/vozila: 202023-078, Multifunkcijski CAM rezalni sistem na osnovi čiste vodne cure – brez abraziva (vodni rezalnik / vodni rezalni sistem). 2 rezalna mostova z 2 rezalnima glavama, vključno z osjo Z 1 glava z možnostjo poševnega reza 1 glava za 2D rezanje Klodpfxefhgvwj Ah Uot Za rezanje pene, plastike, tehničnih tekstilij in drugih ploskovitih, fleksibilnih, nemetalnih materialov. Največja višina materiala: 140 mm Rezalna površina v X in Y: 2850 mm * 2750 mm Stopnja zaščite: IP54 Vključno z visokotlačno črpalko BFT 40.22 (Produktna fotografija je primer) Stroj ima CE certifikat.

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, Used Machine CNC Cutter/Plotter Cutting Area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a powered rotary knife, electrically oscillating knife, and milling spindle (including extraction unit) • Multifunctional tool head for up to 2 interchangeable tools • High-performance vacuum blower for material fixation • Standard equipped with grey conveyor belt table. Turquoise exchange conveyor (offers high contrast for dark materials) available upon request. Additional tools available for expansion (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT powered rotary knife • UCT universal (drag) knife • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Printer mark detection • Camera registration • Punching tool for notches or holes • Milling spindle with extraction unit User-friendly • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade change Kedpfoif Ek Rex Ah Ujlt • Vacuum zones can be activated with a click Fast return on investment • Low costs with high added value • Optimum material utilization through nest expert software modules (not included in delivery) • High speed • Consistent precision Data: • Short cutting times due to high positioning speed up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet goods and roll material (expandable with suitable unwinder) • Fast amortization (Product image as example) The machine is CE-certified.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2002-045, Used CNC Cutter/Plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Ksdpefnlkwofx Ah Uolt Features of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for print mark detection • Multifunctional tool head for holding 2 interchangeable tools • High-performance vacuum blower for fixing the material • Equipped as standard with a gray conveyor belt table (conveyor). Blue-green replacement conveyor available (offers high contrast for dark materials) Further tools can be added (on request): • EOT electric oscillating tool • POT pneumatic oscillating tool • PRT powered circular knife • UCT universal cutting tool (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutting knife • Print mark detection • Camera registration • Punching tool for notches or holes • Milling tool with extraction device User-friendly: • Easily exchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade change • Vacuum zones can be activated by click Rapid amortization: • Low costs with high added value • Optimal material utilization via nest expert software modules (not included) • High speed • Consistent precision Specifications: • Short cutting times due to high positioning speed up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll material (expandable with optional unwinder) • Rapid amortization (Product photo as example) The machine is CE certified.

Stanje: rabljeno, Ex-protected filter system, extraction unit, central cartridge pulse filter – P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Mach. No. 10011932 Year of manufacture: 2020 – as new, unused Airflow: 3,300 m³/h Airflow: 0.9 m³/sec Filter area: 20 m² (1x cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction inlet at filter entrance: 2x Ø 150 mm Exhaust outlet at filter exit: fitted with acoustic enclosure Compressed air connection: approx. 8 bar Motor power: 3 kW Electrical connection: 400 Volt, 50 Hz - Explosion-proof version, ATEX II 2Db 125°C / 3G T4 - Pneumatic rotary filter cleaning, manual activation via push button - Manometer for differential pressure indication (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1x filter cartridge, Ø 325 mm, length 900 mm, P-RIES, type: cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (with acoustic enclosure) equipped with 9x activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Radial fan mounted inside at the top, type IE 3-Premium Efficiency, 12% improved efficiency - Sturdy steel construction, RAL 7035 light grey antistatic powder coated - Dust collection container: retractable drawer, approx. 70 liters (440 x 530 x 300 mm) - EC Declaration of Conformity, operating manual with electrical schematic available Klsdpey N Duqofx Ah Uet Required space (L x W x H): 670 x 700 x 2430 mm Weight (extraction unit): 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg Condition: as new, unused from stock

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: AT4-F 32x16/32x16 - wetterfest, Oprema: hladilna enota, Prezračevalna enota AL-KO Kledpfsxvdi Ssx Ah Uot

Stanje: novo, skupna dolžina: 5.000 mm, skupna širina: 2.000 mm, Leto izdelave: 2026, velikost sprednje pnevmatike: 559, velikost zadnje pnevmatike: 559, nosilnost: 30.000 kg, Težko tovorna prikolica Nosilnost 30.000 kg na 60 % tovorne površine Mere 5000 x 2000 x pribl. 850 mm Oprijemalni trakovi: 559 x 300 Krmiljenje: prednja os - obračalna plošča Kledpfx Aoiwlw Rjh Ujt Zadnja os toga Transportna tla iz smreke, debelina 40 mm, poglobljena, privita Barvanje v RAL 2000 Vlečna ojnica z vlečnim očesom 40 mm, varovalom in nastavitvijo višine Dvojno delujoči zagozdni klin Privarjeni nosilci po 4 na vsaki vzdolžni strani za pritrditev tovora

Leto izdelave: 2013, stanje: rabljeno, Proizvajalec: PAUL VON DER BANK GMBH, Tip: Robotska varilna naprava, Leto izdelave: 2013, Serijska št.: 13.536, Varilni vir, proizvajalec Fronius, tip CM TransPuls Synergic 4000, Hladilna naprava, Varilna enota VR7000CMT, Programirni terminal RCU5000I, Obratna miza, Varilni robot, proizvajalec KUKA, tip KR5-2ARC, Robotska krmilna enota KRC4, Odsesovalna naprava, proizvajalec Plymovent – naprava ni priključena Klsdpfjyx Exvsx Ah Ust

Stanje: rabljeno, Technical Data – Input Hopper with Hydraulic Walking Floor and Bag Opener for Recyclables from Yellow Bags and Commercial Waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Machine Condition: The input hopper with bag opener was previously used at a large recycling facility, where recyclables from yellow bags or commercial waste were loaded into the hopper by wheel loaders. The bags were opened by the bag opener, with the recyclables either fed into a sorting plant or commercial waste transferred for further processing in a metered manner. The system operated flawlessly until it was dismantled and replaced with a larger unit with higher throughput capacity. The machine was disassembled into individual components in our workshop, partially refurbished, reassembled, and tested under operating conditions. The following refurbishment work was carried out and the following spare parts were replaced: - Disassembly of input hopper and bag opener into individual components; cleaning, partial sandblasting, priming, and painting of steel parts. - Various wear and cover plates were newly fabricated and installed. - Removal of worn ends (approx. 40 cbm) of walking floor tubes. Welding and smoothing of new tubes. - Complete replacement of the sliding plastic plates for the hydraulic walking floor. - Removal of the hydraulic unit from the walking floor, draining of the hydraulic oil tank, replacement of oil filters, refill with new hydraulic oil. - Renewal of all three hydraulic blocks, all valves, sight glass and all hydraulic hoses from the hydraulic unit. - On all three walking floor hydraulic cylinders, the seal sets and hydraulic hoses were replaced. - All six end switches (proximity sensors) of the walking floor were replaced. - The conveyor chains on both left and right sides of the drag chain conveyor were renewed. - Seven driver slats of the drag chain conveyor were replaced. - The drive motor of the tearing discs was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. Ksdpfx Aoy S Rw Doh Ujlt - All sliding plastic plates for the hydraulic adjustment of the bag opener were replaced. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without utilizing the bag opener. - On both sides, the lateral collision protection plates were replaced. - Various wear parts of the bag opener were replaced. - The entire system was electrically rewired and connected. - The system control in the switch cabinet was retrofitted by BRT Hartner to autonomous single control and the standard program was reinstalled into the control system. - The system was commissioned and tested by BRT Hartner, see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical information or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, leto zadnje generalne obnove: 2025, Technical Data Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Feed opening chute: 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Processing capacity for empty beverage cans: - One press stroke: approx. 1.7 t/hour - Two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight of press: approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made from wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tinplate cans, sheet metal scrap, steel sheet, as well as aluminum, brass, and copper waste. Condition of the baling press: Kedpfxjy S Rv Ts Ah Uelt The baling press has been completely overhauled in our workshop. The press is in very good condition – see functional video after refurbishment. During relocation of the machine, there was transport damage. The control cabinet was damaged and slightly dented by a forklift, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical details or possible errors.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: 7007490, Lastna teža: 14.300 kg, Dimenzije: dolžina: 6,9 m, širina: 2,5 m, višina: 2,55 m, Dimenzija zabojnika: 6,5 m, Številka drobilca: 103334 Klsdpfx Ahoy Rvlqj Ust

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: CS418-03-08, Lastna teža: 7900 kg, priključna moč: 15 kW, mere kontejnerja: dolžina: 6,5 m, širina: 2,3 m, višina: 2,64 m Kedsy Rvmnspfx Ah Uelt

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Dressing Machine for Grinding Wheels: Simple manual operation, robust and precise Technical specifications: Diamond grinding spindle: HSK-50 or as per customer request (e.g. SK-40, Perfect Arbor, etc.) Max. dressing wheel diameter: ø300mm Max. dressing wheel width: 20mm Max. grinding wheel diameter: up to ø250mm Grinding wheel speed: 0-1500 rpm (infinitely variable) Travel range left/right: 135mm Travel range forward/back: 135mm Dressing wheel diameter (silicon carbide): ø180x10xΨ32mm Approx. 98 degrees traversable on both sides Dressing wheel speed: 0-2800 rpm (infinitely variable) Oscillation frequency of dressing wheel: 0-50 cycles/min (infinitely variable) Dressing wheel oscillation stroke: 0-50mm (adjustable) X/Y axis optical scale resolution: 0.001mm Capabilities: profiling of radii, dressing multiple wheel sets Electrical connection: 380V, 50Hz, total power approx. 1.5kW DXF import included Klodpfxjha Eh He Ah Uet Camera system with live transmission via 23" monitor included Latest software generation GWDress-Studio with automatic AI measurement included

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to a diameter of 250 mm. Thanks to selectable manual or automatic control, dressing processes can be flexibly and highly efficiently configured. Performance Data: - Rotary and feed axes, CNC-controlled - Diamond grinding spindle: HSK-50 or per customer request (e.g., SK-40, Perfect Arbor, etc.) - Max. dresser wheel diameter: ø300 mm - Max. dresser wheel width: 20 mm - Max. grinding wheel diameter: up to ø250 mm - Grinding wheel speed: 0–1500 rpm (infinitely variable) - Range of motion, left/right: 135 mm Kodpfxow E E S As Ah Ujlt - Range of motion, forward/backward: 135 mm - Dresser wheel dimensions (silicon carbide): ø180x10xΨ32 mm - Approx. 98 degrees traversable on both sides - Dresser wheel speed: 0–2800 rpm (infinitely variable) - Dresser wheel oscillation frequency: 0–50 cycles/min (infinitely variable) - Dresser wheel oscillation length: 0–50 mm (adjustable) - X, Y axis optical scale system: 0.001 mm - Capabilities: Profile dressing, disc pack dressing - Connection: 380V, 50Hz, total power approx. 1.5 kW - DXF import included - Camera system with live transmission to a 23" monitor included - Latest software generation GWDress-Studio with automatic AI measurement included - Country of origin: Austria

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 Klsdpjwf Rg Sefx Ah Ust --> Water cooling unit for the welding torch: integrated

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Kledpfswf Rg Ejx Ah Ujt Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Kedpfswf Rgxsx Ah Uslt Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). Kljdpfx Ahswf Rgre Uot --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: Kedpfx Asw Ivqmjh Ujlt a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Klsdpfxeu Ey Dls Ah Uet Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.