Sind 200Mm nakup rabljenega (1.930)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg Kodpfx Aemhh Dhebxolu - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) Kedpfx Abomhhx Iexjlu - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard Kjdpfomhh Anox Abxslu - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. Kodoh Ek Daopfx Abxslu According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. Ksdpfomhhf Sjx Abxolu When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Ksdpfxomhhl Hs Abxjlu Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments Kjdpfx Abemkixwsxjlu - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Kjdpfx Abjmhh Dtexjlu Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: novo, Leto izdelave: 2020, obratovalne ure: 45 h, nosilnost: 1.300 kg, dvižna višina: 4.500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.140 mm, Fabrikant + model: HUBTEX / GENKINGER EGP 13/44 So Mast: 3F4500 ID: 24053.0388 Cat.: Nieuw Mast: 3F4500 Vorken: 1200/2000 mm Ingeklapte hoogte: 2140 mm Hefhoogte: 4500 mm Capaciteit: 1300 kg Bouwjaar: 2020 Uren: 45 uur Batterijcapaciteit: 24 V / 345 Ah Opties: ZEER unieke SPECIALE uitvoering BREEDSPOOR !!! - HEFVERMOGEN 1300 KG @ 1200 MM - Uitgevoerd met spreider !! - VETTER klikvorken 1200 -> 2000 mm !! - Proportionele hef- en daalventielen - Met vrijdragende lepels - Geschikt voor alle soorten pallets - Breedte tussen de steunpoten 1340 MM !! Klodpjzafqyofx Abxsu STUURBEKRACHTIGING, volledig als NIEUW !!

Stanje: rabljeno, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Holp Profile Bucket / PL.060.120 / MS03 / 1,200 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €1,850.00 net / €2,201.50 gross - Suitable for excavators up to: 6 t - Own weight: approx. 170 kg - SAE capacity: 200 liters - Cutting width: 1,200 mm - Back width: 700 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage during rotation thanks to chamfered corners - Optimal design due to multiple bends - Robust substructure - Minimal weight due to optimized design - Excellent material flow in the bucket Kodpoy Rdmvjfx Abxelu - Extended bucket floor for optimal filling - Durable cutting edge made from Hardox 450 When precision is required, the Profile Bucket delivers the perfect edge in any workflow: No other bucket shapes and profiles more precisely or delivers comparable efficiency for your projects than this expertly engineered specialty bucket. We have a large selection of Holp products in stock and available immediately! Simply contact us at / for more details. Financing options available on request. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp product range! Errors and prior sale excepted! = More information = New: Yes Application: Construction Unladen weight: 170 kg For more information, please contact Marius Herden.

Stanje: rabljeno, Leto izdelave: 2026, skupna višina: 600 mm, skupna dolžina: 2.400 mm, skupna širina: 1.200 mm, Couleur : gris Kljdeynzy Hjpfx Abxou Table de soudure / table de bridage * Trous percés ! * Quadrillage en diagonale ! Dimensions : 3000 x 1500 mm Épaisseur du plateau : 15 mm Diamètre des trous : 28 mm Accessoires également disponibles avec supplément : - 4x coin 3D 300 mm - 6x butée 150 mm - 6x butée 225 mm - 1x rapporteur d’angle - 2x prisme - 1x excentrique - 1x coin plat - 12x goujons de serrage - 12x brides - Année de fabrication : 2026 - Documentation disponible : Non - Certificat CE : Non - Longueur de table [mm] : 2400 - Largeur de table [mm] : 1200 - Épaisseur du plateau [mm] : 15 - Dimensions de transport : 2400 mm x 1200 mm x 600 mm (L x l x h) Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement du secteur industriel Lukas van Rossum

Stanje: dober (rabljeno), Vpenjalni kotnik, pripomoček za vpenjanje -Vpenjalni kotnik: za pritrjevanje obdelovanca -Debeljina stene: 31 mm -Dimenzije: 265/150/V200 mm -Teža: 18,7 kg Ksdpfx Absy Iwp Eoxolu

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), 1 piece flat belt conveyor Straight lower section length: 2200 mm Inclined section length: 14,200 mm Conveying height: 9700 mm Kodpfomrtx Rjx Abxelu Belt width: 650 mm Drum motor: Rulmeca Drive power: 2 x 1.5 kW Voltage: 400 Volt Belt speed: 0.4 m/s Pneumatically tensioned pressure rollers Includes several new spare parts and rollers.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FR Jungheinrich, Leto izdelave: 2020, nosilnost: 1.000 kg, dvižna višina: 6.200 mm, vrsta goriva: električni, tip droga: teleskopski, gradbena višina: 2.600 mm, dolžina vilic: 1.200 mm, stanje pnevmatik: 95 odstotek, Oprema: bočni pomik, osvetlitev, zaščita za glavo, Jungheinrich EFG 550 Električni čelni viličar 450 ur, letnik 2020, dvig 6200 mm Pogonska vrsta: električni Nosilnost: 1.000 kg Leto izdelave: 2020 Delovne ure: 485 - se lahko spremeni, naprava je še v uporabi Tehnično stanje: zelo dobro Optično stanje: zelo dobro Dvižni steber: ni navedenega tipa / višina dviga: 6.200 mm Gradbena višina: 2.600 mm Prosti dvig: 1.800 mm Nosilec vilic / bočni pomik Dolžina vilic: 1.200 mm Vključuje polnilec Kledpfx Aopq Id Rjbxju Zelo dobro stanje Prevzem možen le po predhodnem dogovoru v 79111 Freiburg Možna dostava preko špediterja, povprašajte z vašo poštno številko

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, skupna dolžina: 2.300 mm, nosilnost: 16.000 kg, dolžina vilic: 2.400 mm, lastna masa: 1.100 kg, gradbena višina: 1.230 mm, Vilice Težišče tovora: 1200 Širina vilic: 200 mm Debelina vilic: 100 mm Tehnično stanje: dobro Kedsytklcopfx Abxjlu

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Prodajam 1 do 6 kompletov Znamka: Miller Model: Proheat 35 – skoraj kot nov. Kjdpfx Asyr Idtjbxjlu Grelec za hrano z indukcijskim grelnim elementom, 400–460 V, CE oznaka Nova cena kompleta: 54.000 evrov Prodaja samo pravnim osebam (B2B) + DDV ali neto za izvoz Pridržujemo si pravico do napak.

Stanje: dober (rabljeno), Long-link roller chains, conveyor chain, roller chain, drive chain Kodpfjd Tih Rox Abxelu - Chain length: 10 m - Pitch: 200 mm - Inner width: 48 mm - Dimensions: 1200/1000/100 mm - Weight: 176.5 kg

Stanje: dober (rabljeno), Long Link Roller Chains, Conveyor Chain, Roller Chain, Drive Chain - Chain length: 9600 mm - Pitch: 200 mm - Inner width: 48 mm - Dimensions: 1140/920/100 mm Kodpfsd Tih Tox Abxjlu - Weight: 166.5 kg

Stanje: dober (rabljeno), Long-link roller chains, conveyor chain, roller chain, drive chain - Chain length: 10.4 m - Pitch: 200 mm Kjdpfx Absd Tih Nsxjlu - Inner width: 48 mm - Price: per unit - Quantity: 2 units - Dimensions: 1140/960/100 mm - Weight: 180 kg/unit

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Three-jaw chuck Brand: Röhm Diameter: 200 mm With individually adjustable jaws Short taper size: 6 Taper diameter: 106.390 mm Bolt circle: 133.4 mm Weight: 24.5 kg Kjdpod Th I Tjfx Abxjlu Year of manufacture: estimated

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10809/2, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, SAV sinusna magnetna miza 400 x 200 mm, rabljena, popolnoma funkcionalna Klsdpfxow T Rg Ho Abxsu

Stanje: novo, Maksimalna dolžina brušenja 3200 mm Delovno območje (dolžina*širina) 3180*180 mm Velikost brusnega kolesa 200*100*32 mm (možno izbrati po zahtevi) Vodilni sistem stroja: Vodila + obrabno odporni trak Hladilni sistem: Rezervoar za vodo z vgrajeno vodno črpalko za pršilo obtočno hlajenje Natančnost brušenja ≤0,05 mm/m Obratovalna napetost 380V 50Hz Kedpsy Hgw Asfx Abxjlu Brusilna glava stroja hitrost povratka Približno 17 m/min Prenosni tip brusilne glave: Pogon na jermen Moč brusilne glave (poseben motor za brusilni stroj): 4,0 kW Moč motorja za premik: 0,75 kW Moč vodne črpalke: 0,125 kW Skupna moč: približno 5,5 kW Skupna teža: približno 2800 kg Skupne dimenzije: 5350*1300*1300 mm CE

Stanje: pripravljen za uporabo (rabljen), * Lijaki: z NOVIMI valji Kljdpfx Aboywl Tkoxou * Za trak: 1200 mm * NOVI valji, dimenzije: 465 mm L x 89 mm ∅ * Cena: 56 € na kos * Na zalogi: 250 kosov

Stanje: pripravljen za uporabo (rabljen), * Model: viseči valji * Za trak: 1200 mm * Valji velikosti: 465 mm dolžina x 133 mm ∅ * Cena: 36 € na kos * Zaloga: 300 kosov. Kodoywl Tdepfx Abxelu

Stanje: novo, Stroj za valjanje testa Ital Form Robustna konstrukcija Veliki valji zagotavljajo odlično valjanje, zanesljivost ter dolgo življenjsko dobo Dimenzije odprtega stroja: 3380 x 1010 x 1160 mm Dimenzije zaprtega stroja: 1080 x 1010 x 2250 mm Kljdpfxsuuguzj Abxju Dolžina traku: 1200 mm Električna moč: 0,75 kW / 1,1 kW Napetost: 400 V 50 Hz Največja količina testa za obdelavo: 8 kg Teža stroja: 250 kg