Seidner Form & Test Preizkusna Naprava, Preizkusni Stroj nakup rabljenega (55.330)

Stanje: rabljeno, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer maintenance carried out Hjdjzii A Dopfx Aqtjt General Information For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test stand operated in single-shift use, and all maintenance was regularly performed by the manufacturer. Special features: - Robust construction for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance record available - Ideal for research, testing, and development applications Technical Data – Test Stand Feature / Value Total height of test stand: 1215 mm (without clamping device) Width of test stand: 2005 mm Depth of test stand: 1205 mm Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy, min.: Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value Total height of control cabinet: approx. 1800 mm Tabletop height: 1080 mm Control cabinet width: 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Control cabinet depth: 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight: 152 kg (small tabletop), 187 kg (large tabletop), with granite tabletop 247 kg Location Requirements Feature / Value Required space: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load capacity: 234 N/cm² Electrical Requirements Feature / Value Voltage: 400 V three-phase with neutral conductor and protective earth Phase rotation: clockwise Voltage fluctuations: ≤ ±10 % Short interruptions: < 20 ms Limits for continuous disturbances: Radio interference level A in accordance with VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / ground resistance: < 0.3 Ω Connection and Protection Feature / Value Power supply: 400 V / 50 Hz (clockwise rotation) Connection plug: CEE socket, 5-pin, 16 A Protection: 16 A Test stand weight: approx. 3.6 t Maximum clamping device weight: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data; all information provided without liability!) If you have any further questions, we are happy to assist you by phone.

Stanje: rabljeno, SincoTec Type: Exciting Mot Resonance Test Stand POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test stand is designed as a dual-mass oscillator. It consists of a vibration head, excited by an unbalanced motor via a frequency-controlled asynchronous motor, which is installed in the upper part of the machine to generate the dynamic amplitude. The vibration head is supported on the upper traverse by preloaded coil compression springs and centrally guided. The central load drive is located in the lower part of the machine and provides the static preload using a geared motor and spindle drive. The specimen chamber is located above the clamping table and is limited upwards by the adjustable traverse. Control of the test stand is handled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and complies with protection class IP 50 according to EN 60529. Technical Data: General Test Stand Data: - Total height: 1840 to 2240 mm - Machine table height: 1030 mm - Test stand width: 800 mm - Test stand depth: 1500 mm - Maximum specimen chamber height: 600 mm (without force transducer) - Free column passage: 550 mm - Maximum force amplitude: 10,000 N - Maximum total force: ±20,000 N - Maximum oscillation stroke: ±5 mm - Test frequency: 30 to 110 Hz - Sensor accuracy: min. class 1 (according to DIN EN 10002-3) - Weight: approx. 1880 kg Hsdpfxezii Aws Aqtst - Max. clamping device weight: 150 kg Control Cabinet Data: - Total height: 1900 mm - Table top height: 1080 mm - Width: 650 mm - Depth: 700 mm - Weight: 152 kg - Color: RAI 9006 (White Aluminium), table top Midnight Installation Requirements: - Required space: 2.5 x 2.5 m - Required ceiling height: 2.8 m - Floor load capacity: 170 N/cm² - Power supply: 400 V / 50 Hz (right-hand phase sequence) - Connection plug: CEE socket, 5-pin, 16 A - Fuse protection: 16 A Connection and Environmental Conditions: Network requirements: - Voltage: 400 V three-phase with neutral conductor and protective earth, right-hand phase sequence - Voltage fluctuations: < ± 10% - Short interruptions: < 20 ms - Limits for continuous interference: radio interference level A (according to VDE0871) - Frequency: 50 Hz ± 1% - Protective earth resistance: < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data. All information is non-binding!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Stroj za hladno preoblikovanje za ravnanje, rezanje, hladno preoblikovanje in brušenje konic Hedpfx Aszdr Ncoqtst za proizvodnjo baterijskih kontaktnih zatičev Obseg žične debeline: 0,2 - 2,5 mm Dolžina zatičev: 2,5 - 50 mm Zmogljivost: maks. 600 kosov/min Teža: 1.300 kg.

Stanje: dober (rabljeno), 410 RABLJEN stroj za bagete, valjar, model SKT - 63. ZUNANJE MERE (v cm): - višina: 136, - širina: 117, - dolžina: 185 (raztegnjena: 335), - levo krilo: 109/70, - desno krilo: 71/64. Hedpfx Aozdybgoqtet Naprava je pripravljena za ogled v našem skladišču (36-068 Bachórz, Poljska). Na voljo plačljive možnosti: prenova / prevoz / montaža / zagon. Naveden znesek je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO IN UKRAJINSKO.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, obratovalne ure: 15.620 h, Funkcionalnost: popolnoma funkcionalen, širina na sredini: 1.400 mm, višina središča: 500 mm, središčna višina pri ročični gredi: 500 mm, moč vretenovega motorja: 30.000 W, skupna dolžina: 4.560 mm, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 2.200 obr/min, premer tulec: 70 mm, poteza s peresom: 750 mm, sila podajanja os X: 65.000 N, podajalna sila osi Z: 65.000 N, dolžina podajanja os X: 310 mm, dolžina podajanja os Z: 600 mm, hitrost pomika os X: 6 m/min, hitrost podajanja os Z: 6 m/min, teža obdelovanca (maks.): 1.100 kg, vhodna napetost: 400 V, moč: 45 kW (61,18 KM), trajanje garancije: 12 meseci, Stroj je v odličnem stanju, saj smo ga temeljito obnovili. Ponujamo 12-mesečno garancijo. Po želji nudimo tudi namestitev, zagon in usposabljanje. Hodpfx Ajzluh Reqtjt Usposabljanje na področju obdelave kovin ali razvoj izdelkov je seveda mogoče in se ponuja kot ločena storitev. Stroj je opremljen s krmilnikom Sinumerik 840 D CNC, vključno s programsko opremo za predvajanje.

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 1.200 mm, število osi: 3, Ta triosna Reform ravnalna brusilka je bila izdelana leta 1989. Ima delovno območje 1.200 mm x 500 mm, kar omogoča dovolj prostora za različna brusilna opravila. Stroj je v zelo dobrem stanju in popolnoma delujoč. Če iščete visokokakovostno ravnalno brusilko, priporočamo, da upoštevate Reform brusilko, ki jo imamo v ponudbi. Za dodatne informacije nas kontaktirajte. - Proizvajalec: Reform - Delovno območje: 1.200 mm x 500 mm - Leto izdelave: 1989 - Stanje: Zelo dobro / Popolnoma delujoče Hsdpfxozb Erao Aqtot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Št: 11136. Scodix Ultra Pro, leto izdelave 2018 Digitalni tiskarski stroj B2+ za nanášanje dekorativnih elementov, zasnovan za nanašanje reliefnega UV-premaz, selektivnega laka, kovinskih efektov, folije in drugih vrhunskih efektov na digitalno ali ofsetno natisnjene liste. Uporablja se za luksuzno embalažo, knjižne naslovnice, čestitke, vrhunski komercialni tisk itd. Lastnosti: Ultra Pro se razlikuje od standardnega modela Ultra, saj ponuja: • Do 4 rezervoarjev za polimer • Avtomatsko preklapljanje med polimeri • Možnost preklapljanja med različnimi polimeri za dekoracijo brez ročnega čiščenja • Podpora za več vrst dekorativnih elementov na eni platformi Zaradi tega je stroj veliko bolj produktiven, če pogosto preklapljate med: • Reliefnim Scodix Sense efektom • Ravnim selektivnim UV-premazom • Kovinskimi efekti • Digitalno folijo • Drugimi specialnimi polimeri Ultra Pro lahko ustvari: • Reliefni selektivni UV-premaz (Scodix Sense) • Ravni selektivni UV-premaz • Digitalno folijo • Kovinske efekte • Spreminjanje podatkov (VDP/VDE) • Oblivanje in strjevanje • Kristalne efekte • Braillovo pismo • Visoko sijoče teksture Specifikacije: Maksimalna velikost lista: 545 × 788 mm (B2+) Minimalna velikost lista: 297 × 420 mm Hodpozq Hmpsfx Aqtst Maksimalna površina tiska: 504 × 748 mm Hitrost: do 1.250 listov B2 na uro Ločljivost: do 2.540 × 450 dpi Registracija: 4 CCD kamere Scodix RSP™ (Rotate, Scale & Position) Debelina polimera: 5–250 mikronov Gramatura papirja: 135–675 g/m² Maksimalna debelina papirja: 700 mikronov (0,7 mm) Podprti materiali: ofsetni, digitalni, laminirani, premazani, plastike in PVC Spreminjanje podatkov: PDF delovni tok z izbirnim sistemom črtne kode Dimenzije stroja: 6.327 × 1.788 × 1.889 mm Teža: približno 4.400 kg Napajanje: trifazno, 220 V, povprečno 13,5 kVA (maks. 30 kVA) Komprimirani zrak: 7 barov, regulirano

Stanje: rabljeno, Testing device, personal grounding tester, Safety Pips - Manufacturer: Wolfgang Warmbier, personal grounding tester Ovp - Model: Safety Pips Ref.: 7100.181 - Operation: Battery powered, 9V - Box dimensions: 115 x 110 x H70 mm - Weight: 0.2 kg Hjdpfx Ajtuyc Deqtst

Stanje: dober (rabljeno), Vibratory Finishing Machine Pre-filter Unit, Filtration System, Pre-filter Tank, Water Filter for Rotary Vibrator, Vibratory Finishing Machine, Vibratory Finishing System, Rotary Vibrator, Trowalizing System, Continuous Trough Vibrator Hedsigamuspfx Aqtot - Pre-filter unit: suitable for vibratory finishing machines or other applications - Transport frame: mobile, equipped with 2 filter cartridges - Collection tank: capacity approx. 350 liters - Overall dimensions: 1400/620/H920 mm - Weight: 106 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 748 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5231847, vrsta vhodnega toka: trifazni, skupna širina: 3.988 mm, skupna dolžina: 4.740 mm, skupna višina: 3.440 mm, vhodna napetost: 400 V, priključek za stisnjen zrak: 6 letvica, skupna masa: 2.700 kg, Ploščna termoformirna naprava Naprava za obdelavo polizdelkov Maksimalna velikost plošče: 1.000 x 700 mm Minimalna velikost plošče: 300 x 210 mm Maksimalna debelina plošče: 12 mm Minimalna debelina plošče: 0,5 mm Naprava je popolnoma opremljena in pripravljena za priključitev ter avtomatsko podajanje materiala. Hodpsznbp Tefx Aqtot Funkcija za zgornji in spodnji orodni del, vodno hlajeni kalupi. Pametno upravljanje s shranjenimi parametri materiala. V ceno je vključena horizontalna žaga GEISS, horizontalna tračna žaga HBS 1000.

Stanje: rabljeno, Leto izdelave: 1990, Oznaka stroja: Rabljeni stroj za pakiranje (termoformirna linija) Proizvajalec: Adolf Illig Tip: SB 53C - DIN Leto izdelave: 1990 Pogon motorja: 1,24 kW Dimenzije: D 1.600 x Š 1.135 x V 2.710 mm Lastna teža: 500 kg Tehnična dokumentacija: Da Opomba: Ogrevalna moč: 4,5 kW (15 keramičnih ploščatih grelcev) Vakuumska enota: največja stopnja vakuuma 0,95 kp/cm² Formati: Oblikovalna površina: 405×500 mm Velikost kartona: 400×495 mm Širina folije: 445 mm Pozitivna globina vleka: 150 mm Negativna globina vleka: 150 mm Višina pakiranja: 150 mm Premer folijskega valja (blister): 400 mm Premer folijskega valja (skin): 350 mm Notranji premer valja: 70 mm Stanje: Rabljeno Hsdpfoxm Sa Hsx Aqtst Cena: Na zahtevo

Stanje: zelo dobro (rabljeno), RS Simulators Model: ST2K320/45 K Water-cooled shock test chamber Temperatures in upper test chamber: Hedpfx Ajzgbuteqtot Temperature range: +40 °C to +180 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Temperatures in lower test chamber: Temperature range: -40 °C to +100 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Humidity in upper test chamber: Climatic temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (±2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical supply: Total power: 13 KVA Current draw: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 950 kg Important information for you as the buyer for your safety! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), RS Simulators Type: ST2K320/45 Water-Cooled Shock Test System Operating Climate Range Temperatures in Upper Test Chamber: Hsdpezgbumefx Aqtot Temperature range: +40 °C to +180 °C Temperatures in Lower Test Chamber: Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical Supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A / 2.5 kg Weight (Chamber): approx. 850 kg For your security as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data, all information is non-binding!) For further questions, we are happy to assist you by phone.

Stanje: skoraj kot novo (rabljeno), Carbon Zapp GDU.2R (45F) – 2021 – Odlično stanje Naprodaj je profesionalna diagnostična naprava Carbon Zapp GDU.2R (45F), namenjena testiranju in diagnostiki bencinskih injektorjev za neposreden vbrizg (GDI). Hjdszkkk Eopfx Aqtet Naprava je iz leta 2021 in je v praktično tovarniškem stanju – uporabljena je bila le 1,8 ure, zato je skoraj kot nova. Tehnični podatki: * Proizvajalec: Carbon Zapp * Model: GDU.2R (45F) * Leto proizvodnje: 2021 * Delovni čas: samo 1,8 ure * Najvišji testni tlak: 450 bar * Testiranje 1 injektorja naenkrat * Napajanje: 100–240 V AC, 50/60 Hz * Potrebno stisnjeno zračno: 6,5–10 bar (suh in brez olja) Uporaba: Naprava omogoča profesionalno diagnostiko in preverjanje delovanja bencinskih injektorjev GDI, ki se uporabljajo, med drugim, v naslednjih vozilih: * Volkswagen / Audi / Škoda / SEAT (TSI, TFSI, FSI) * BMW * Mercedes-Benz * Ford EcoBoost * Opel SIDI * Hyundai / Kia GDI * Mazda Skyactiv-G * Toyota D-4 / D-4S * Honda Earth Dreams * Nissan DIG * Volvo Drive-E in pri mnogih drugih proizvajalcih, ki uporabljajo injektorje Bosch, Denso, Delphi, Continental/VDO in Hitachi. Najpomembnejše prednosti: * Profesionalna diagnostika bencinskih injektorjev GDI. * Natančna meritev parametrov in učinkovitosti injektorjev. * Avtomatizirani testni postopki. * Intuitivna programska oprema. * Visoka natančnost in ponovljivost rezultatov. Stanje naprave: Naprava je v odličnem tehničnem in vizualnem stanju. Zaradi uporabe le 1,8 ure jo lahko praktično obravnavamo kot novo. Idealna rešitev za servisno delavnico ali podjetje, ki se ukvarja z diagnostiko in regeneracijo bencinskih sistemov za vbrizg.

Stanje: rabljeno, Leto izdelave: 2021, Sistem Canon CX-1, vključno z računalnikom, zapakiran v originalnih embalažah proizvajalca. Hodpfx Ajzmxqroqtjt Serijska številka: 210141 – Leto nakupa: 2022 Sistem je bil kupljen za kratkotrajno klinično študijo in je bil zelo malo uporabljen; v odličnem je stanju.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Nanxing NB875A je profesionalna 2-u-1 kantirka koja kombinira ravno kantiranje i softforming tehnologiju u jednom stroju – idealno rješenje za vrata bez ručki i moderne fronte namještaja. Opremljena kompletnim setom jedinica za pretglodanje, grijanje, pritiskanje i završnu obradu, NB875A pruža fleksibilnost, visoku produktivnost i vrhunsku kvalitetu kantiranja. Potpuno automatski upravljački sustav i intuitivan softver omogućuju brzo prebacivanje između 14 različitih profila (puni C, lijevi/desni J, centralno konkavni, lijevi/desni konkavni, W-profil, dijamantni profili itd.). Ključne značajke - Višenamjenski stroj za ravno i softforming kantiranje u jednom prolazu. - 14 automatski izmjenjivih profila putem servo upravljanja. - Energetski učinkovita funkcija – automatski standby nakon neaktivnosti. - Napredno industrijsko PC upravljanje s 24” touchscreenom, online povezivanje, opcija čitača barkoda. - Potpuno zatvoreni stroj sa zvučno apsorbirajućim materijalom za tihi rad. - CE certificiran, s ugrađenim komponentama međunarodnih marki. Hsdpfx Ajxcwrmoqtet Radne jedinice i oprema - Jedinica za pretglodanje s 2 elektro-pneumatska motora, H35 mm glodalima. - Dva seta jedinica za profiliranje J & C (4 motora – 7,5 kW + 3,5 kW) s automatskim prebacivanjem. - Predgrijavanje panela + 2 jedinice za nanošenje ljepila (panel + rub). - Softforming i stanicu za prešanje s preciznim čeličnim valjcima i sustavom predgrijavanja trake. - Servo pogon napajanja trake i pneumatsko krajnje blanjanje (Ø180×3,5×60T pile, 12.000 okr/min). - Jedinice za grubo i fino obrezivanje, jedinice za struganje radijusa i ravno struganje. - Dvije polirne jedinice za savršen sjajni završetak. - Nezavisne usisne haube (9 × Ø125 mm) za sve radne jedinice. - Automatski sustav podmazivanja i potpuna sigurnosna zaštita (detekcija debljine panela, nadzor ulaza, E-STOP). Tehničke specifikacije - Minimalna veličina panela: 300 × 150 mm (središnje konkavno ≥ 400 mm) - Debljina panela: 18 mm (ravno), 18–25 mm (softforming) - Debljina kant trake: 0,5–0,6 mm (softforming), 0,5–1,2 mm (ravno) - Brzina pomaka: 8 m/min - Napajanje: 380V / 50Hz - Tlak zraka: 0,7 MPa - Instalirana snaga: 68 kW - Neto masa: cca 6.000 kg - Dimenzije stroja: 11.015 × 1.000 × 1.940 mm Primjene - Proizvodnja vrata bez ručki za kuhinje, ormare i kupaonski namještaj - Kompleksne kantarsko/radne operacije u srednjoj i velikoserijskoj proizvodnji - Vrhunska obrada ruba s nevidljivom linijom ljepila Prednosti za proizvođače - Maksimalna svestranost: jedan stroj za sve ravne i softforming profile kantiranja. - Vrhunska završna obrada: glatki rubovi, savršeno prianjanje ljepila. - Visoka učinkovitost: automatski rad, brzo mijenjanje profila. - Smanjenje troškova: manje strojeva, minimalni zastoji.

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it achieves up to 13,000 bottles per hour and supports scalable outputs for medium- to high-speed lines. The machine is optimized for PET containers and is suitable for a range of beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones’ engineering ensures outstanding reliability, consistent bottle quality, and smooth changeovers. Designed as a versatile component for a used bottling line or as a stand-alone blow molder, this pre-owned system delivers precise preform handling, stable heating, and efficient blow performance. It features an Alaska neck finish, an 8-cavity configuration, and a clockwise operating direction, making it a proven choice for beverage manufacturing and industrial packaging applications where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Year of Manufacture: 2004 Configuration: Rotary Maximum Speed: 13,000 bph Container Material: PET Current Bottle Format: 0.5L No. of Cavities: 8 Thread/Neck Finish: Alaska Maximum Container Height: 350 mm No. of Grippers (infeed/outfeed): 6 Hodpfx Aox H Tf Teqtst No. of Mandrels: 180 Operating Direction: Clockwise Operating Height: 1470 mm Power Supply: 400 V, 3-phase, 50 Hz Operating Current: 331 A Operating Pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation and Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and rapid diagnostics. The control architecture supports stable preform heating profiles, precise blow cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are built into safeguard and access points to support consistent production with minimal downtime. Production Line Integration Capabilities This blow molding machine can be operated as a stand-alone unit or seamlessly integrated into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Changeovers are streamlined around the 8-cavity rotary platform, while the Alaska neck finish provides compatibility with a wide range of closures and filling monoblocks throughout the beverage production process.

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: SO128, Used Contiform Stretch Blow Moulding Machine This used Krones Contiform S14 stretch blow moulding machine is designed for high-capacity production of PET bottles in modern beverage manufacturing. With a maximum output of up to 25,000 bottles/hour, it is an excellent choice for businesses looking to increase capacity or upgrade a used bottling line with reliable second-hand industrial packaging equipment. The machine features a Siemens PLC and a Krones HMI for robust automation and user-friendly control. Neck-handling transfer ensures stable bottle guidance across formats, while the rotary design provides consistent performance in beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks (CSD), milk, edible oil, beer, wine, and spirits. The current setup is optimized for the 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated filling lines. Technical Specifications & Performance Data Hedpfxsx H Tgdj Aqtot Manufacturer: Krones Series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Table height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (moulds): 14 Number of mandrels: 7 Number of grippers (infeed/outfeed): 7 Working direction: Counterclockwise Power supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine is equipped with a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V, 50 Hz, with 3 PH + N ensures stable, industry-grade performance. Safety guards and interlocked access points enable safe operation during production and format changeovers. The neck-handling design contributes to smoother format changes and reduces bottle scuffing. Integration into Production Lines This Krones Contiform S14 can operate as a standalone stretch blow moulding machine or be integrated into a complete beverage production line. It can be seamlessly connected with preform handling systems, high- and low-pressure air supplies, and downstream conveyors, leading to filling, labelling, and packaging equipment. The rotary platform and neck-handling transfer guarantee compatibility with typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink production.

Leto izdelave: 2025, stanje: novo, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips. Hjdsd R Dp Espfx Aqtjt

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Universal Testing Machine PM3 Force: 3 kN Crosshead Stroke: 1200 mm Working Depth: 66 mm Total Height: 1677 mm Weight: approx. 55 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" even without a PC. For tests requiring data storage and recording of the curve progression, our basic software offers control and evaluation capabilities. This enables you to generate various test sequences and create a test protocol. Furthermore, you can export raw data for further processing in your own software. Hedeyc U Rbspfx Aqtot Options: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Compression plates, bending fixtures, shearing devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Stanje: zelo dobro (rabljeno), 391 RABLJEN aparat za rogljičke, podaljševalnik testa, stroj za bagete. ZUNANJE MERE (v cm): - višina: 115, - širina: 250, Hsdpfszard Tsx Aqtjt - dolžina: 120, - levo krilo: 116/60, - desno krilo: 116/60. Naprava, pripravljena za ogled, se nahaja v našem skladišču (36-068 Bachórz, Poljska). Na voljo so plačljive možnosti: obnova / prevoz / montaža / zagon. Cena je navedena brez DDV. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO, UKRAJINSKO.

Stanje: zelo dobro (rabljeno), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA is a universal weathering instrument for testing the lightfastness and weather resistance of materials under standard, high-temperature, and high-performance conditions. - XENOSENSIV gearbox - Lamp output control in W/m² - XENOCHROME 320 35–100 W/m² - Sample chamber temperature regulated up to 80°C - Measurement sensors at sample level XENOSENSIV E(300–400 nm) - Humidification / spraying - Water supply with integrated water tank - Sample chamber temperature: ambient – 80°C - Black standard temperature: surface – 130°C - Relative humidity: 10% – 95% Hodpfx Aqezdtkustjt - Electrical configuration: 3/N/PE AC 400V ±10% 50–60 Hz - Power connection: 32A - Power consumption: approx. 12kVA - Nominal xenon lamp power: 2200VA - Xenon lamp output: 2800VA - Rated current: 16A - Maximum lamp current: 20A - Dimensions: width 900 mm x depth 1200 mm x height 1800 mm - Maximum sample area: 4000 cm² - Weight: approx. 400kg - Type: Heraeus Atlas Xenotest BETA LM - Condition: used - Scope of delivery: (see picture) (Changes and errors in technical data, specifications reserved!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), RMS Vibrations Test System We offer you an RMS electrodynamic vibration test system. RMS Vibrations Test System Hedpfjzdtc Dsx Aqtet Test Manager SWR 900 Vibration Exciter SW 3006 30V-50A-3434 N Power Amplifier TGA 3000-000.00 Condition: used Untested! Tests could not be performed. Scope of delivery: (see picture) (Technical data, specifications subject to change and errors!) For further questions, we are happy to assist you by phone. Written orders can be placed via email or fax.

Stanje: dober (rabljeno), Zwick Type: BZ1.0 / TH1S Zwick Tabletop Testing Machines Zwick with a maximum force of 1.0 kN. Traverse path: 1150 mm. Test speed: 0.1 ... 1800 mm/min Hjdpfx Aqszdryzotot Scope of delivery: (see pictures) (Subject to change and errors in the technical data and information!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 389 RABLJENA stroj za rogljičke, podaljševalnik, stroj za bagete. Hedpfx Aqoy Uvxfstet ZUNANJE MERE (v cm): - višina: 135, - širina: 295, - dolžina: 125, - levo krilo: 135/65, - desno krilo: 141/65. Naprava, pripravljena za ogled, se nahaja v našem skladišču (36-068 Bachórz, Poljska). Na voljo plačljive opcije: obnova / transport / montaža / zagon. Navedena cena je neto. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOŠKO, RUSKO, UKRAJINSKO.