Schenk Filterbau Gmbh Zhf-S 25 nakup rabljenega (115.523)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, volumenski pretok: 90 m³/h, skupna širina: 2.950 mm, skupna dolžina: 3.800 mm, skupna višina: 2.300 mm, poraba energije: 1 kWh, Innovative band filter technology for maximum process reliability The RESY KBF compact band filter system represents a pioneering advancement in the field of automatic band filter units. Key advantage: There is no relative movement between carrying belt, filter fleece, disc wheels, and sludge scrapers. This ensures that the filter fleece is not damaged, even when processing large quantities of chips or solid particles. Compared to conventional flat-bed filters, the compact band filter offers: - Up to 80% less space requirement - Higher degree of purity - Consistent filtration performance - Reduced maintenance intervals - Maximum process stability Operating principle of the compact band filter A robust, endless metal-link belt is half-shell-shaped guided over two rotating disc wheels and driven by a geared motor. The filter fleece is positioned between the belt and the wheels. The contaminated medium is fed via a central inlet pipe directly into the completely sealed filtration tank. In the calm zone, solid particles settle and form a filter cake. This filter cake acts as an additional natural filter layer and continuously improves separation efficiency. As contamination increases, the liquid level rises—depending on the design, up to 500 mm. When a predefined maximum value is reached, the system automatically advances fresh filter fleece without interrupting the filtration process. At the same time, the following are reliably discharged: - Used fleece - Sludge Bedjy Evxyepfx Agtslg - Chips - Coarse particles An integrated sensor continuously monitors the diameter of the fleece roll and signals in time when a roll change is necessary. The entire filtration process is fully automatic and energy-efficient. Custom-tailored configuration for your application Actual filtration performance depends on several process parameters, including: - Throughput volume - Medium (e.g., emulsion, oil, process water) - Inlet concentration - Desired filtration fineness - Particle size and material properties The compact band filter is configured individually according to your technical requirements. Typical applications - Metalworking - Grinding processes - Turning and milling operations - Coolant preparation - Process water treatment - Chip and sludge filtration

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 28 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2380029, skupna višina: 2.600 mm, skupna širina: 1.500 mm, skupna dolžina: 3.410 mm, skupna masa: 4.200 kg, premer rotorja: 330 mm, vrsta vhodnega toka: Klimatska naprava, dolžina rotorja: 800 mm, moč: 30 kW (40,79 KM), Function: The input material is drawn in by two slow-running, counter-rotating shafts (resulting in low dust and noise emissions), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. Should the machine become overloaded or foreign objects enter the cutting mechanism, the control system reverses operation. The precise cutting gap of the cutter discs ensures energy-efficient shredding of the material. The mounted clearing comb prevents wrapping and uplift of the material being shredded. The width of the blades and the number of cutting edges determine the output size of the shredded material. Applications: This robust and heavy-duty machine, designed for maximum durability, enables the cost-effective shredding of not only special waste, metal chips, electronic scrap, and steel drums, but also various containers filled with liquids. All types of industrial waste, steel and plastic containers Production waste, file folders, paper, cardboard Blodpfx Agoyw N Aceteg Electronic scrap, electric cables, metal chips Food, kitchen waste, biogenic waste, wood Glass, plastics, various liquid-filled containers, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary valve, each with cover • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying Bledet S Rduopfx Agtog • Big Bag base plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Leto izdelave: 1985, stanje: pripravljen za uporabo (rabljen), Stroj za izdelavo tlačnih vzmeti. Večina strojev znamke Schenker, kakor tudi nekateri stroji Bamatec, je na voljo pri nas. Blsdpfx Agef I Uumstog

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour Bodpfx Agex A U Ncetelg – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, skupna masa: 16.000 kg, Stacionarni kladivni mlin - Leto izdelave: 2001 - Višina dovoda: 350 / 400 mm - Širina dovoda: 1.600 mm - Premer rotorja: 1.200 mm - Ločena hidravlična enota Bedpsyzn S Defx Agtelg - Teža: 16 t - Možna pogonska moč: 160 - 400 kW - Pretok do 60 t/h, odvisno od motorja in materiala Veliko delov obnovljenih (ležaji rotorja in valjev, verige, kladiva, protinoži, valji, sito itd.). Opcijsko: pogonski motor, električna krmilna omara, dovajalni sistem.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Stacionarni kladivni mlin - Leto izdelave: 2001 - Višina dovoda: 350 / 400 mm - Širina dovoda: 1.600 mm - Premer rotorja: 1.200 mm Bledpjyzn H Iefx Agteg - Ločena hidravlična enota - Teža: 16 t - Možna pogonska moč: 160 - 400 kW - Pretok do 60 t/h, odvisno od motorja in materiala Veliko delov obnovljenih (ležaji rotorja in valjev, verige, kladiva, protinoži, valji, sito itd.). Opcijsko: pogonski motor, električna krmilna omara, dovajalni sistem.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 13.500 kg, premer rotorja: 470 mm, dolžina elektro omare: 2.800 mm, širina krmilne omare: 600 mm, višina krmilne omare: 2.100 mm, dolžina rotorja: 2.000 mm, moč: 220 kW (299,12 KM), največja hitrost vrtenja: 80 obr/min, širina odprtine za polnjenje: 1.650 mm, dolžina polnilne odprtine: 2.060 mm, perforacija sita: 50 mm, vhodna napetost: 400 V, Najzmogljivejši model: Micromat 2000 V2 Pogonski motor: 2 x 110 kW, 400 V/50 Hz Krmilna omara: kompletna s frekvenčnim pretvornikom Bledpfxsyxxk So Agtsg Hitrost rotorja: pri 50 Hz cca 80 obr/min Rotorski noži: 104 kos, novi Oblika rotorskega noža: 43x43x19,5 mm Vstopna odprtina (D x Š): 2030 x 1650 mm Dolžina rotorja: 2030 mm Krog rotorjevega premera: 560 mm Strgalo: da Protinov: da Hidravlična enota: kompletna Hidravlični cilinder za sito kaseto: sita 50x50 mm Skupna teža cca 13,5 t Dimenzije (D x Š x V): cca 6500 x 2970 x 2660 mm Ogled in preizkus možen po dogovoru. Vključno z lijakom Dobavni rok: takoj

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, designed to optimally support companies with the highest quality standards. Thanks to its high-quality construction and wide range of applications, it offers intuitive operation that efficiently and reliably optimises your tube filling processes. The powerful drives and user-friendly colour touchscreen control system enable maximum flexibility when changing formats and products, significantly simplifying tube filling. The machine features memory slots for quick and reproducible adjustment of all relevant machine parameters. If you want to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. Bedpoyq Hgksfx Agtolg System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling Range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1% Output: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, obratovalne ure: 38.650 h, Funkcionalnost: popolnoma funkcionalen, Solvent system, completely overhauled. 3 tanks. Immersion with ultrasound / spraying / vapor degreasing / vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Basket dimensions: 4x T520 x W320 x H200 mm. Filling volume: 1000 L. Bedpfx Agjwndu Ujtjlg

Stanje: novo, Leto izdelave: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on beech workbench top - Lifting operation (up/down) via hydraulic foot pump - Load capacity: 350 kg - Base height: 540 mm - Useful lift: 610 mm - Maximum height: 1150 mm - Sturdy platform upper frame (970 x 590 mm) beneath the workbench top - Heavy-duty scissor lift construction with finger protection - Total weight: approx. 160 kg - 2 swivel castors with brake, 2 swivel castors without brake - Wheel diameter: 125 mm - On each narrow side, 2 adjustable support feet with swivel foot plate and rubberised contact area. Thus, the lift table can be used as a stationary or mobile workstation. - Powder-coated base frame and platform frame in light grey RAL 7035, scissors in violet blue RAL 5000 * Incl. widened foot pedal, enabling operation even when the table is fully lowered with the assembled workbench top. Product data – Workbench: Bjdperr Twmofx Agtelg Workbench made from solid beech (50mm thick), load capacity 200kg on the planing bench Front vice approx. 520 x 70 mm Front and rear vices fitted with spindles, ensuring precise and stable clamping jaw guidance Rear vice and workbench top feature holes for bench dogs Front edge of the workbench top: 130mm high Bench drawer at the rear, running the full length of the workbench, for tool storage; includes 4 matching round bench dogs Usable top length: 1,490 mm Usable top width: 620 mm Overall length: 1,700 mm Overall width: 790 mm Workbench top thickness: 50 mm Front edge of workbench top: 130 mm high Workbench top weight: approx. 90 kg

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.680 mm, obratovalni tlak: 6 letvica, končni tlak: −0,6 letvica, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, hitrost dviga: 166 mm/s, 2x Hova Column Slewing Crane • 2220847.03 • Max. load capacity: 50 kg • Outreach: 4 m • Custom aluminium jib lengths (depending on load capacity) • Smooth-running trolleys with guide and counter-pressure rollers • Custom load capacities • Slewing range up to 270°, adjustable • Standard fitted with HOVA chain hoist and vacuum lifter • Special solutions thanks to in-house production • Top-mounted aluminium column slewing jib cranes • Suspended aluminium column slewing jib cranes • Telescopic slewing jib cranes • Articulated arm slewing jib cranes • Mobile version for transport by forklift or crane 2x HOVAMAT Vacuum Lifter HV 50kg/90° • 2220847.01 • Horizontal and vertical handling of panels of all materials • Custom load capacities with overload protection • Lifting speed steplessly adjustable from 0–10 m/min • Operating voltage: 1x230V/50Hz • Operating pressure: min. 6–7 bar filtered compressed air • HOVA special handling grip for one-handed operation, with all controls for hoist and vacuum lifter • Low dead weight due to compact design • Suction pad arrangement as required with longitudinal and transverse beam Bledpfjt I S Slsx Agtsg • also suitable for gripping with magnets, mechanical or pneumatic grippers • Additional safety with HOVAMAT+ and continuous weight monitoring via scale. Lowering cut-out in case of slack chain, load release only after deposit, optional weight display possible • Optional: energy-saving unit 2x Vacuum Lifters: €6,000 each 2x Column Slewing Jib Cranes: €6,500 each Sale is made under exclusion of any warranty.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta hlajenja: zrak, valovna dolžina laserja: 1.064 nm, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. Laser marking has become indispensable in many industries for permanent labeling. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without advanced programming skills. Serial and part numbers can be automatically incremented by the software following initial setup. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard configuration includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30-watt, 20-watt, or 50-watt options • Laser class 1 • Wavelength: 1064nm Bledpfxowlc Sts Agteg • Marking field size: 150x150mm (larger sizes optional) • Signal lamp for operating status indication • Optional: rotary axis (3-jaw chuck) • Optional: extraction system (incl. activated carbon filter) • Optional: digital height measuring system • Optional: autofocus system for automatic determination of focus distance • Marking software EZCAD in German / English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. component height: approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminum profiles • Air-cooled • Door width: approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without the need for extensive programming expertise. Serial and article numbers can be automatically incremented by the software after a simple initial setup. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) directly from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking area size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Power supply 230V Bodpfx Agew Et Iletslg - Air cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. The use of lasers for permanent marking has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Lot and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also supported. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side arms for marking long parts, movable Z-axis, drawer systems, etc., are available. Programmable, software-controlled axes (X, Y, Z axes) and database connectivity are also possible. Made in Germany Fiber laser: 30 W, 20 W or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optionally available) • Marking software: EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic focal distance determination • Optional: programmable X, Y, and Z axes (software-controlled) • Pilot laser (easy preview, contour preview) • Focus finder (for easy focus adjustment) • Signal beacon for operating status display Blsdpfx Aowkpvvegtsg • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard support • Frame made of aluminum profiles • Air cooled • Door width approx. 700 mm / Pass-through door height: 400 mm • 230 V power connection • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) Blsdov Sybyjpfx Agtsg • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SPE-Spero QTX-340, Naprava je bila uporabljena za raziskovalne namene, SPE-Spero QTX-340, MIR-mikroskop s funkcijo „Hyper Spectral Imaging“. Spektralna pokritost področja prstnih odtisov (1900 - 950 1/cm). High-Res-IR objektiv: 12,5X; NA:0,7, 650μm FOV. Enhanced LowMag-Lens Za vidno svetlobo: 4,0X; NA:0,13, 650μm FOV. 480*480 slikovnih pik, širokopasovna mikrobolometerska kamera. Kamera za vidno svetlobo. QT-Laser-Performance-Paket vključno z visoko natančnim avtomatiziranim odrom (< 1μm ponovljivost natančnosti). Hitro zajemanje podatkov. Joy Stick, kontrolni računalnik, Win10. »Diskretna frekvenčna IR-slikovna« v realnem času. Delovanje v transmisiji in refleksiji. 4000 ur aktivnega laserja. Bsdpfx Ajy Dcd Hegtjlg

Leto izdelave: 2025, stanje: novo, Universal Testing Machine PM50 Force: 50 kN Bedeydazuepfx Agtslg Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, stanje: novo, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. Blodpfx Aod R Dp Eegteg This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 6.650 h, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.550 mm, pomik po osi Z: 400 mm, višina obdelovanca (maks.): 290 mm, teža obdelovanca (maks.): 500 kg, število mest v zalogovniku orodij: 15, proizvajalec krmilnikov: Bosh Rexroth, skupna masa: 5.500 kg, dolžina mize: 4.000 mm, širina mize: 1.300 mm, moč vretenovega motorja: 10.000 W, nazivna (navidezna) moč: 25 kVA, število vreten: 1, hitri pomik na osi Z: 20 m/min, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, največja hitrost vrtenja: 24.000 obr/min, vrtljajska hitrost (min.): 1.200 obr/min, nos vretena: HSK63F, hitrost vretena (min.): 1.200 obr/min, dolžina orodja: 240 mm, teža orodja: 6.000 g, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, ArtisX6 SHORT DESCRIPTION. 1 working electrospindle with 10 kW power; constant power in the range of 12,000 to 24,000 rpm; operating range: 12,000–24,000 rpm. Tool holder: HSK63F. Axis travel ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis = 360° Axis rapid traverse speeds: X/Y plane = 85 m/min; Z = 20 m/min Clearance under gantry: 290 mm 1 automatic disc-type tool changer, 15 positions. Max. tool length: 240 mm, max. tool mass: 6 kg Drilling unit in L configuration, 2.2 kW power, spindle speed 4,500 rpm, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm. 2 x 4 pneumatically retractable positioning pins (Ø25 mm, stroke 115 mm). Tool set included (some never used) Table divided into two stations for alternate work 1 vacuum pump with 250 m³/h capacity and a 500 l compensation tank Machine safety (EU standard): BUMPER bumper system (no mats, light barriers, etc.) Control: Bosch Rexroth PNC, industrial PC BTV 16, Pentium III processor, 256 MB RAM, 10 GB HDD, network card Drive control via Profibus SERCOS system Data input: USB stick, local network Operating system: Windows 2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Mobile control panel with manual control panel Remote diagnostics Interpolation: 5-axis linear, 2 ½ D circular Bsdpfx Aowh Aidjgtslg Connected load: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% operational. Storage location: Northern Poland.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za polnjenje in zapiranje steklenic Holdefleiss tip 12/3. Stroj je pripravljen za 0,5 l Euro in 0,33 l Long-Neck steklenice, vključno z HDE. Stroj je brez predvakuumskega sistema, opremljen z dolgocijevnimi polnilnimi ventili. Polnilni ventili bodo na novo zatesnjeni. Izvedeta se test tesnosti in tlačni preizkus. Blsdpfx Agjyycudstjg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, trajanje garancije: 12 meseci, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg Blsdsyycqxepfx Agteg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Blsdpfx Agsyz Sn Netjg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 39 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MZ-7321/19 / 11024, skupna višina: 2.198 mm, skupna širina: 1.648 mm, skupna dolžina: 3.500 mm, skupna masa: 3.500 kg, premer rotorja: 400 mm, širina rotorja: 850 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, največja hitrost vrtenja: 100 obr/min, moč: 30 kW (40,79 KM), Kot novo enovalni rezalnik / drobilna naprava z manjšimi sledmi uporabe. Uporabljena samo za testne namene. Gred rotorja je opremljena s površinskim oklepom. Kasetni sistem za rotorske nože 34 x 34 mm. Elektromotor 30 kW, skupna inštalirana moč 37 kW, hidravlična moč 3,75 kW, 400 V, 3-fazni. Poleg tega so na voljo novi rezalni noži za rotor in stator kot rezervni deli. Navodila za uporabo v nemščini. Statorski noži so tridelni in nastavljivi. Lijak je zaprt, perforirana plošča 40 mm. Stroj je možno prikazati pod napetostjo. Po nakupu ni garancije. Prosto nakladanje iz obrata – Raesfeld. Podrobne slike so na voljo na zahtevo. Pridržujemo si pravico do vmesne prodaje. Cene so neto. Bljdpfx Agoy E S S Aotog

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Letnik izdelave: 2025 Bsdpeyybh Asfx Agtslg Stanje: novo ID kategorije: 679 Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.