Ridgid 1/2" Bspt nakup rabljenega (108.352)

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion Klsdpfx Aboy Auh Ioxsu * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: zelo dobro (rabljeno), Rabljene regalne police, vtični regali Stojala tip S3 Višina: cca 446 cm (možno tudi skrajšati) Globina: 50 cm Dolge prečke tip S1 Dolžina: 150 cm Dvonadstropne police 90 cm + 60 cm Ksdpfxsxxdkuj Abxelu Cena velja za 11 stojal in 100 polic, skupaj 15 m regala Na voljo večkrat Možna dostava

Stanje: rabljeno, Leto izdelave: 2001, Tehnične podrobnosti: Premer kolesa - maks.: 50 mm Širina kolesa: 20 mm Modul - maks.: 4 mm Modul - min.: 0,1 mm Klodpfexxl Sgex Abxou Skupna priključna moč: 12,5 kW Teža stroja ca.: 4000 kg Potrebni prostor ca.: 2,2 x 2,5 x 2,3 m Dolžina obdelovanca - maks.: 300 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Continuous CNC Processing Centre for Furniture Parts Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By appointment Double-sided continuous CNC processing centre FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for the finishing of solid wood furniture components. The machine combines multiple processing operations in one production line: • End trimming & squaring • End drilling • Vertical and horizontal drilling • CNC routing • Glue application & glue injection • Dowel insertion Production capacity: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Continuous processing centre IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with light barrier • Infeed via servo-driven pusher shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Work stations 1st station – Scoring/Trimming B 2/B 8 • 2× 3 kW motors • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End Drilling M • 3 kW motor • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC Vertical Routing J 3D • 8 kW electric motor • 9,000–12,000 rpm • Automatic X-axis, manual Y/Z • Tool holder HSK63C 4th station – CNC Vertical Routing J 3D (second unit) • Identical configuration as station 3 5A. Station – Glue Injection R 4 • Electronically adjustable glue quantity • 2+2 glue injectors • Inclination ±30° 5B. Station – Dowel Insertion Unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed section – Drilling Bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swivel table • Automatic workpiece transport • Chip conveyor with auger Kljdpfx Abjyk Empexsu Equipment • Acoustic enclosure • Safety fence • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical / pneumatic diagrams: English The photos show examples of products that can be produced with this machine. Price: €290,000 excluding VAT, freight and dismantling.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, barva: drugo, prostornina tovornega prostora: 25 m³, VAN HOOL 20FT ISO cisternski kontejner 24.500L / 2 predelka Predel 1: 12.500L Predel 2: 12.500L IMO1 spodnje praznjenje parno ogrevanje test 2.5Y- + CCS veljaven do 08-2028 = Dodatne informacije = Splošne informacije Leto izdelave: avg. 1995 Modelno leto: 1995 Mere Dimenzije (D x Š x V): 606 x 244 x 259 cm Teže Lastna teža: 4.700 kg Nosilnost: 29.300 kg Skupna dovoljena masa: 34.000 kg Kodpfjy Eqq Iex Abxelu Funkcionalno Znamka nadgradnje: Van Hool 24.720L TC, 2 predelka (11.950L/12.770L), L4BN, IMO1, T11 Število prekatov: 2 Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za dodatne informacije kontaktirajte Arne Honingh.

Stanje: dober (rabljeno), Leto izdelave: 1999, Dvoranski žerjav, žerjav, električna vitel s jekleno vrvjo, ročni voziček, valjčni voziček, voziček žerjava, voziček mačka, tekalni voziček, voziček žerjava, voziček za progo, viseča proga-voziček, dvižni mehanizem, -Proizvajalec: Stahl, voziček žerjava z električnim vitlom za jekleno vrv -Vitel: tip AS 3016-16 2/1 -Nosilnost: 3200 kg -Glavno dvigovanje: 8 m/min -Fino dvigovanje: 1,35 m/min -Pogon vozička: FA-C 3728 133-1 Klsdpfx Abstlzdqexsu -Hitra počasnost vožnje: 5/20 m/min -Razmak valjev: 1400 mm, mere glejte slike -Hitrost bobna: 16,0 / 4,0 m/min -Količina: na voljo 1 voziček žerjava -Cena: na kos -Transportne mere: 1670/1200/V470 mm -Teža: 462 kg/kos.

Stanje: dober (rabljeno), Leto izdelave: 1999, Halski žerjav, žerjav, električni vitel z jeklenico, ročni pogon, kolesno podvozje, voziček za žerjav, žerjavno podvozje, tekalni mehanizem žerjava, vozeča mačka, podvozje nosilca, podvozje viseče proge, dvižni mehanizem, -Proizvajalec: Stahl, žerjavno podvozje z električnim vitlom -Vitel: tip AS 2008-16 2/1 -Nosilnost: 1.500 kg -Hitrost vožnje: m/min -Razmak med valji: 153 mm, mere glej fotografije Klsdpfjq Tvpxjx Abxou -Hitrost bobna: 16,0 / 4,0 m/min -Dvižna višina: ca 8,5 m -Transportne mere: 1120/1020/V380 mm -Teža: 251 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, Hatlenski žerjav, žerjav, električni vitel z jeklenico, ročni voziček, kolutni voziček, voziček žerjava, žerjavna vožnja, mehanizem vozička žerjava, žerjavni voziček, voziček po tirnici, nosilni voziček, viseči voziček, dvižni mehanizem. -Proizvajalec: Stahl, pogon žerjava z električnim jekleničnim vitlom -Jeklenični vitel: tip AS 2008-16 2/1 Kjdpfx Astnlz Uobxelu -Nosilnost: 1500 kg -Razmak med kolesi: 153 mm, mere glejte slike -Hitrost bobna: 16,0 / 4,0 m/min -Glavno/precizno dviganje: 8,0/2,0 m/min -Višina dviga: pribl. 9,0 m -Pogonska enota: FU-A 11 43 22 -Hitrost premikanja: 20,0/5,0 m/min -Prevozne mere: 1120/1020/H380 mm -Teža: 226 kg

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Kledpfx Abet Hwylsxju Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Leto izdelave: 1995, stanje: rabljeno, Diameter 0 mm Workpiece length 1000 mm Workpiece width 875 mm Kljdet Hwu Nopfx Abxeu CNC deburring cell, with 2 pallets / 10 WW / 510 - 5 axes CNC - SIEMENS 510 controlled flexible brushing and deburring center

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 931216, Technical Specifications: - Edge sanding machine for edge processing on welded cabinets, enclosures, safes, etc. - SIEMENS control system for automatic feed and oscillation - Max. sanding height approx. 1200 mm - Sanding belt dimensions: 100 x 2240 mm - Sanding belt speed: 12 + 24 m/s - Sanding unit can be swivelled - 2 magnetic clamping plates - Motor-driven dust extraction for sanding - Pneumatic connection: 6 bar - Drive: 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm Klodpfx Aeggbmajbxou - Weight approx. 1500 kg

Stanje: rabljeno, 1 pair of transport dollies, platform trolleys, transport carts GORR 1 pair = 2 transport dollies, each equipped with 4 swivel castors Load capacity per dolly: 1,000 kg Platform size per dolly: 1050 x 255 mm Klsdsxcixljpfx Abxeu Platform sheet thickness: 4 mm Overall height: 145 mm Wheel diameter: 100 mm Wheel width: 37 mm Load capacity per fixed castor: 300 kg - Each dolly fitted with 4 swiveling fixed castors featuring white polyamide wheels, bolted to the carrier plate - Each dolly includes two fixed castors with brakes - Steel sheet carrier plate as the platform surface with reinforced side edge Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per dolly: 17 kg Net weight for both dollies: 34 kg Used, in good condition Price per pair = 2 heavy-duty dollies Delivery includes 2 pieces of these universal, multipurpose heavy-duty transport dollies. Currently 50 pairs in stock. Both dollies together are fitted with 8 swivel castors and support up to 2 tonnes. Our customers use them to transport studs, boards, planks and sawn timber. Other users move angle irons, girders and heavy pipes in the workshop. Also suitable for transporting electrical control cabinets, switch cabinets, heavy tables and furniture. Ideal for use as machine dollies, material dollies or machinery moving skates.

Stanje: dober (rabljeno), prevoženi kilometri: 812.271 km, moč: 320 kW (435,08 KM), prva registracija: 08/2015, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 6x2, medosna razdalja: 6.700 mm, gorivo: dizel, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 10.170 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, dovoljena osna obremenitev (os 3): 7.500 kg, Leto izdelave: 2015, Oprema: AdBlue, centralno zaklepanje, parkirna klimatska naprava, parkirni grelec, spojler, tempomat, = Additional Options and Equipment = - Aluminium fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Roof spoiler - Windshield - Cabin - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 - Cuppers 1-2-3 deck Livestock + Cuppers 3 deck trailer 2009 MY: 13-8-2015 / 18-2-2009 KM: 812271 XLRASH4100G073990 / XL9VA101092053008 76-BGG-7 / 83-WD-LH APK/TUV: 24 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoas Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 Cupper 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swinging floorboards Folding roof 3 decks Fans Remote release = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf spring Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: Air suspension Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: Air suspension Weights Unladen weight: 14,507 kg Payload: 13,493 kg gross vehicle weight: 28,000 kg Functional Bodywork manufacturer: ZF Maintenance, History and Condition Kodpfx Aboymaqnoxslu APK (Roadworthiness inspection): tested until 08.2026 Technical condition: good Visual condition: good Identification Registration number: 76-BGG-7 Further information Please contact VAEX The Truck Traders for further information.

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno),

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 1.750 mm, skupna dolžina: 1.750 mm, skupna višina: 1.700 mm, vrsta vhodnega toka: trifazni, Automatic Basket Washer HYDRO WASH 1200 2-in-1 is a multifunctional device designed for fully automatic washing of parts in a motor-driven rotating basket or, for more complex-shaped components, high-pressure washing at 140 bar. This combination of processes ensures that the device is suitable for use in any workshop. It is ideal for companies specializing in the regeneration of turbochargers, steering gears, or gearboxes, significantly improving workflow efficiency. To guarantee user safety and maintain optimal washing parameters, the washer is equipped with an electronic control panel and a set of cooperating sensors. Operating principle: Before first use, fill the tank with washing liquid. The recommended cleaning solution is a mixture of MRS Cleaner Strong concentrate and water in the appropriate ratio. The Hydro Wash washer enables both manual and automatic washing. a) For automatic washing, prepare the unit (fill with water and concentrate), close the glovebox cover, close the lid by pressing and holding the two buttons (front and rear of the unit simultaneously), then press the start button. *Basket rotation is possible with the lid open. This is done by pressing the right button on the foot pedal or simultaneously pressing both buttons (front and rear of the unit), providing the glovebox cover is closed. b) For manual washing, close the lid by pressing and holding both buttons (front and rear simultaneously). Open the glovebox cover and press the left button on the foot pedal. STANDARD EQUIPMENT INCLUDES: - Lid-release sensor for opening during the washing process - Liquid level sensor in the tank (dry-run protection) Kedjxm Ullepfx Abxjlu - Liquid temperature sensor - Adjustable spray arms with high-quality stainless steel nozzles from Spraying System - Mechanically driven rotating basket - 140 bar high-pressure pump - Compressed air gun - Pressure regulator with air/water separator - Coarse insoluble contaminant filter (0.8mm mesh filter) - Fine filter for contaminants - Adjustable feet - Drain valve - Pneumatic actuators Technical Specifications: Basket diameter: 1200 mm Working height: 500 mm Basket load capacity: 300 kg Programmable operation time: 0-99 min Washing temperature: 60℃ Heater power: 12 kW Tank capacity: 400 l Spray output: 200 l/min Spray operating pressure: 4.5-6 bar Manual washing pressure: 140 bar Overall width: 1750 mm Overall depth: 1750 mm Overall height: 1700 mm (2450 mm with lid open) Power supply: 3~400V Optional extras: - Belt oil separator - Set of low-pressure lances - Reinforced pump WE ALSO OFFER HYDRO WASH 2-IN-1 WASHERS IN OTHER SIZES. MODELS 800 AND 1000 AVAILABLE. CONTACT US FOR DETAILS ON OTHER MODELS.

Leto izdelave: 2008, stanje: skoraj kot novo (rabljeno), Verkaufen wird ein Paket von 26 Kühlsystemen – Alfa Laval Markenverdampfer, alle ausgelegt für den Betrieb mit Glykolkühlung. Die Systeme sind wahlweise mit 220V oder 380V versorgt bzw. verfügen über ein austauschbares Stromversorgungssystem je nach Anwenderbedarf. Baujahr der Anlagen: 2008. Auf Wunsch ist auch Einzelverkauf möglich, nicht nur als Paket. Kljdeg N Db Hjpfx Abxeu Gewerbliche Luftkühler für den Einsatz in kleinen und mittleren Kühlräumen von 10 bis 400 m³. Modelle wurden für eine einfache Wartung mit sofortigem Zugang zu Inspektionsbereichen entwickelt. Diese Baureihe ist sowohl als DX-Verdampfer als auch als Sole-Luftkühler erhältlich. Lamellenwärmetauscher: - H(C)FC: Innenberippte Kupferrohre ø 12 mm, Dreieckrohrteilung - Soleausführung: Glatte Kupferrohre ø 12 mm, Dreieckrohrteilung - Gewellte Aluminiumlamellen - Lamellenabstände: 4, 5,5, 6, 7, 8, 10 und 11 mm • 1 bis 4 AC-Ventilatoren, ø 250 mm bis zu ø 500 mm, saugend hinter dem Wärmetauscher eingebaut. Ventilatormotoren 230V/50-60Hz/1ph oder 400V/50-60Hz/3ph in zwei Geräuschpegeln (H/L). Motoren mit dynamisch und statisch ausgewuchtetem Außenläufer, gefertigt nach VDE 0530/12.84. • Korrosionsbeständige Materialien: Wärmetauscherrahmen AluZinc, Gehäuse robustes, pulverbeschichtetes Stahlblech RAL 9002. • Klappbare Tropfwanne und Seitenabdeckungen für einfache Installation und Wartung. • Ausreichend Platz zum Einbau eines Expansionsventils im Gehäuse. • Montagewinkel ermöglichen eine bündige Deckenmontage. • Ausgestattet mit Schrader-Ventil am Sauggasanschluss zu Testzwecken. • Pumpensystem auf Anfrage verfügbar. • Aufkleber zeigen Ventilatorlaufrichtung und Kältemittel Zu-/Ablauf. • Lieferung in Montageposition: Kühler montiert auf Holzträgern, Installation per Gabelstapler möglich. Typenschlüssel: 1 Serie AlfaCubic (BL, GL, RL) 2 Kältemittelsystem (E = Trockenexpansion, W = Wasser/Sole) 3 Geräuschpegel (H = hoch, L = niedrig) 4 Ventilatordurchmesser (25=250, 35=350, 40=400, 50=500 mm) 5 Ventilatoranzahl (1 bis 4) 6 Rohrreihen (A=4, B=6, C=8) 7 Phasen (S=1-phasig, D=3-phasig Δ) 8 Motornennspannung (230V, 400V) 9 Anzahl Kreisläufe 10 Verpackung (CR=Kiste) 11 Gehäusematerial (AP= pulverbeschichtet, SS= Edelstahl) 12 Abtausystem (A=Luft, E=Elektroabtauung, HG=Heißgas) 13 Lamellenmaterial/Beschichtung (AL=Aluminium, EP= Epoxybeschichtetes Aluminium) 14 Lamellenabstand (4, 5,5, 6, 7, 8, 10 und 11 mm) 15 Rohrmaterial (Cu=Kupfer) Die Verdampferregister dieser Geräte sind leistungsstark und bestehen aus 1/2”-gewelltem Kupferrohr und wellenförmigen Aluminiumlamellen mit 3,5, 6 und 8 mm Teilung. Der Rahmen aus Aluminiumblech ist mit Schutzkragen versehen und für Thermostat-Expansionsventile vorbereitet. Die Außengehäuse sind aus hochwiderstandsfähigem, RAL 9018 polyesterlackiertem Aluminium gefertigt. Konstruktiv vermeidet die kompakte, hochstabile Bauweise Vibrationen. Sämtliche Komponenten sind für Wartungsarbeiten leicht demontierbar. Die Verdampfer sind serienmäßig mit Axialventilatoren und schutzgitterausgerüstet, die Motoren mit 315 oder 350 mm Durchmesser, Einphasen-Ausführung (230V/50Hz), Schutzart IP54, außenliegender Rotor, energiesparend. Alle Motoren sind in einer wasserdichten Hauptanschlussbox nach IP55 zusammengeführt. Die Abtauung erfolgt elektrisch über 230V-Heizstäbe in armierten Edelstahlrohren mit vulkanisierten Enden, die direkt in Batterie und Wanne integriert sind. Die Anschlüsse erfolgen in einer wasserdichten Anschlussdose.

Stanje: rabljeno, used Manufacturer: Schneider Model: SK 1/2 Machine no.: 10144 GS-certified Motor power: 5.5 kW Tilting range: -5° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable 6 speed steps: 4000/5000/6000/8000/10000/12000 rpm Reversible (left/right rotation) Kledpfx Aew Dgbiebxju Table size: 1150 mm x 850 mm Spindle diameter: 30 mm Spindle fence with fine adjustment Control panel Extraction port D 100 / 120 mm Space requirement approx. 1600 mm x 1200 mm x 1500 mm Weight approx. 1000 kg Total connected load: 5.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected No warranty or guarantee

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, številka stroja/vozila: CLX25 06 2 320 6, obratovalne ure: 250 h, Electric chain hoist with electric trolley, frequency-controlled, 20/5 m/min travel speed. Two-stage lifting mechanism, 6.3/1 m/min lifting speed. Hook travel 8 m, equipped with chain container. Kledpswdrgkjfx Abxou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Oprema: kompresor, Proizvajalec: GEA Leto izdelave: 2012 Model: 2 MVR 1 Kledjyvrwtepfx Abxsu Dovodna količina: 35.000 l/h pri sirotki Izparilna zmogljivost: do 25.000 kg/h Tip: MVR izparilnik z TVR finisherjem (Visoko) koncentrator: 20 do do 60 % suhe snovi Vključuje pasterizator z vbrizgavanjem pare MVR-kompresor: PILLER Moč MVR-kompresorja: 456 kW Poraba pare finisher: ~900 kg/h Poraba pare pasterizator: 900 - 1700 kg/h

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 11/2011, skupna dolžina: 14.040 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, medosna razdalja: 9.300 mm, Leto izdelave: 2011, Konfiguracija osi Zadnja os 1: dvižna os; Največja dovoljena osna obremenitev: 9.000 kg Zadnja os 2: Največja dovoljena osna obremenitev: 9.000 kg Zadnja os 3: Največja dovoljena osna obremenitev: 9.000 kg Kodpfx Abeyza Hmsxjlu Teže Lastna teža: 12.920 kg Nosilnost: 26.080 kg Skupna dovoljena masa: 39.000 kg Vzdrževanje APK (tehnični pregled): veljaven do 08.2026 Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, globina vrtanja: 710 mm, največja hitrost vrtenja: 1.250 obr/min, širina mize: 1.250 mm, dolžina mize: 1.120 mm, premer vretena: 100 mm, The submission of a bid obligates the buyer to collect the machine by the deadline of 28/01/2026! A prompt appointment must be arranged after the auction ends, as the machine has not yet been dismantled! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO steep taper No. 50 Boring depth in one pass: 710 mm Lowest spindle center position above table surface: 0 mm Highest spindle center position above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of the tailstock: 1,300 mm Spindle speed: 6 – 1,250 rpm Table clamping surface: 1,120 mm x 1,250 mm Longitudinal table travel: 1,300 mm Cross table travel: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 – mm/rev Infinitely variable feeds for headstock and table: 20 – 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: 3-phase current Voltage: 380 Volts Frequency: 50 Hz EQUIPMENT Documentation including circuit diagram Wiring diagrams Kodpfx Aex Hfugobxelu Operating manuals Note: Brake is defective, clutch has been removed (included loose). Estimated repair cost in Germany approx. €3,000.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Na voljo je trifazni asinhronski motor Hoyer. Stopnja zaščite: IP55, izolacijski razred: F/B, oblika izvedbe: IM B3L, razred učinkovitosti: IE3, moč: 30kW/36kW, faktor moči: 0,90, način delovanja: S1, teža: cca 250kg. Vključuje frekvenčni pretvornik Lenze i550. Možen je ogled na lokaciji. Kjdexmkc Hepfx Abxjlu

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 11/2011, velikost pnevmatike: 385/55/22.5, Leto izdelave: 2011, Dvižna streha Ločen pod / sistem z dvema cilindroma Samostojno delovanje Daljinsko upravljanje = Dodatne informacije = Velikost pnevmatik: 385/55/22.5 Zadnja os 1: Krmiljena; Profil pnevmatike levo: 65%; Profil pnevmatike desno: 65% Kedpfx Abeyxw A Tsxslu Zadnja os 2: Profil pnevmatike levo: 65%; Profil pnevmatike desno: 65% Lastna teža: 10.800 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.200 mm, skupna širina: 700 mm, skupna višina: 2.000 mm, dolžina police: 1.200 mm, nosilnost na odsek shranjevanja: 140 kg, višina okvirja: 2.000 mm, Oprema: dvostranski, Rabljeni regali. Segmentirani, vpenjani polični regal v zelo dobrem tehničnem stanju. Pocinkan regal, številka skladišča: #77 METALSISTEM Ksdpovnzmcofx Abxelu Mere, ki se nanašajo na ceno ponudbe: - višina pokončnega okvirja do 200 cm, na voljo tudi višina 250 cm, - globina 70 cm, - širina police 120 cm, - maksimalna nosilnost police 150 kg pri 4 policah na eno sekcijo - pri regalu z manj kot 3 sekcijami je nosilnost posamezne police 100 kg - nastavitev police na vsakih 5 cm. Regal po navedeni ceni velja kot 1 priključni komplet za naslednjo sekcijo: 1 komplet vključuje: 1 okvir/noga/stranica + 4 police Za sestavo prostostoječega regala potrebujete 2 kompleta. Mere ene sekcije: Širina – 120 cm Višina – 200 cm Globina – 70 cm Mere police: Širina – 120 cm Globina – 70 cm Na zalogi približno 2100 metrov tega regala. Vabimo vas k ogledu ostalih oglasov za skladiščne regale.

Stanje: rabljeno, Stroj je opremljen z zalogovnikom za zamaške za penino. Zamaški za penino so samodejno poravnani in preko dovodnega kanala transportirani do naprave za zamaševanje penine. Klsdpfxsxz Ug Ss Abxeu