Polypack Industries Schrumpfpacker nakup rabljenega (26.481)

Stanje: novo, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Data: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Backgauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Iiedpfx Ajxxd D Uobxoc Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via control panel Motorized backgauge up to 1,000 mm User-friendly control panel mounted on a swing arm Hydraulic hold-downs positioned close to the cutting line Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Upward-folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Simple blade replacement and regrinding Adjustable cutting length for economical processing Lower blade, reversible 4 times Upper blade, reversible 2 times Qualified after-sales service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stanje: novo, Shaft diameter: 30 mm Upper roll diameter: 148 mm Lower roll diameter: 118 mm Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Weight approx.: 220 kg Height: 1450 mm Technical specifications: - Steel frame - Two lower rolls are powered - Direct gear drive system - Upper roll rotates freely (idle) - Hardened rolls - Roll shafts are hardened and ground - Dual-speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working positions Options: - Digital readout €600 - Angular side guide rolls €900 - Dual speed STANDARD - Brake motor €150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 6 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls Iijdpfod Eqqzox Abxec 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * A special washer (spacer) may be required / Only with special beam bending attachment • Capacities given for 260 N/mm² plate yield strength

Stanje: novo, Pressure: 65 Bending length: 2550 mm Frame width: 2550 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 3680 x 1960 x 2500 mm Approx. weight: 5,500 kg Motor power: 11 kW CNC Servo-Electric Press Brake KKI Model REVOLUTION DDM-6525 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic systems and, thanks to their flexibility and reliability, represent the technology of tomorrow. The higher speed and precision of this new generation of machines provide you with greater efficiency, ergonomic advantages, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with a variety of models and tonnages, Dener is a pioneer of this technology, with extensive experience and quality. Standard Equipment: KK-Industries is the exclusive representative of the DENER group. We have developed a premium model specifically for the European market. The CNC Servo-Electric Press Brake by KK-Industries, made by DENER: Technological Advantages: Model REVOLUTION DDM The CNC Servo-Electric Press Brake stands out for its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Full usable length between side frames - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66 T 17” touchscreen - Y1, Y2, X, and R axis CNC-controlled - CNC crowning via 3D control - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes We make no compromises regarding punching tools and matrice—each CNC Servo-Electric Press Brake KKI DENER REVOLUTION is equipped with quality tooling from EUROSTAMP, Italy. - Segmented gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servo motors on linear guides and ball screw Of course, a machine is only as good as the service behind it. Therefore, we place great importance on highly qualified staff with extensive experience in CNC sheet metal processing. Iedpfod Etfxsx Abxoic - Laser safety device on the upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis backgauge, X1, X2 - R type backgauge - X-Prime type backgauge - Hydraulic upper and lower tool clamping - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Stanje: novo, Pressure: 175 Bending length: 3570 mm Frame width: 3570 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5340x2100x2680 mm Weight approx.: 11,500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model REVOLUTION DDM-17535 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and are, due to their flexibility and reliability, the technology of tomorrow. This new generation of machines offers higher speed and precision, delivering greater efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes in a range of models and tonnages, Dener is a pioneering force in this field, bringing extensive experience and quality. Iedpfxjd Etf De Abxjic Standard equipment: KK-Industries is the general agent for the DENER group. For the European market, we have assembled a premium model. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages—Model REVOLUTION DDM: - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter operation - Full frame length usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphics controller Delem 66T with 17" touch screen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via 3D control - X-axis: 500 mm; R-axis: 150 mm stroke (for 1.5 m and 2 m machines) - X-axis: 750 mm; R-axis: 250 mm stroke (for all other press brakes) For the upper tool and die, we make no compromises—equipped with premium tools from EUROSTAMP Italy. - Segmented gooseneck upper tool - 4-V die block 60x60 mm (V = 16, 22, 35, and 50 mm) - Backgauge driven by servomotors on linear guides and ball screws The quality of a machine is matched by its service. That’s why we prioritize highly qualified staff with long-standing experience in CNC sheet metal processing. - Laser safety device on the upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2; R-Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T KK-Industries GmbH

Stanje: novo, Pressure: 40 Bending length: 1300 mm Frame gap: 1300 mm Installation height: 375 mm Stroke length (max.): 150 mm Dimensions (LxWxH): 1880 x 2435 x 2320 mm Weight approx.: 3400 kg Motor power: 2 x 3.8 kW electric ball screw CNC press brake KKI Model REVOLUTION B-Servo 1550 mm x 40 t Standard equipment: KK-Industries is the general representative of the DENER Group. We have assembled a high-quality model for Europe. The CNC servo-electric press brake from KK-Industries, made by DENER, offers technological advantages: Model REVOLUTION B-Servo 1550 mm 40 t Iisdpod H Hh Hjfx Abxoc High speeds with ball screw drive The CNC servo-electric press brake stands out for its high precision, accuracy and versatile applications - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length 1550 mm Bending Capacity (Press force) 40 tons Maximum Stroke 150 mm Daylight Opening (Installation height) 375 mm Approaching Speed 150 mm/s Bending Speed 20 mm/s Return Speed 150 mm/s Power 2 x 3.8 kW Weight 3400 kg Overall Length (A) 1880 mm Width (C) 2435 mm Height (D) 2320 mm KK-Industries GmbH There's something for everyone!

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1450 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 4 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Approx. weight: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. This model offers high efficiency and meets the standards of the premium class. It can handle laser powers of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction equipment, elevators, and other large machines and systems. This is an ideal cutting machine for anyone looking to outsource production. Features such as wireless remote control enable simple blowing, cutting, pausing, calibration simulation, and more. A standard nesting software package is included, allowing parts to be prepared for cutting quickly and automatically, without operator intervention. The machine also features a flycut cutting function. Thanks to its dual shuttle table system, you can continue cutting operations without downtime. All our machines are manufactured to European standards and are CE certified. Our FLC models come equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and an auto-view function that detects obstacles and automatically adjusts the head position. Cutting heads include automatic cooling. All bridges in our machines are constructed from welded aluminum alloy sheet, formed as a single piece. The one-piece design ensures rigidity and prevents deformation of the bridge under impacts, overlaps, or loads. Additionally, being three times lighter than steel profile bridges allows for higher speeds and acceleration with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus cutting head - Nesting software - 19" touch CNC controller - Flycut function - Nozzle and lens starter kit - Parts dust trays - Automatic table changer Iiodpfx Ajruwccsbxjc - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system

Stanje: novo, Bending length: 1250 mm Sheet thickness: 3 mm Top roller diameter: 90 mm Technical data: - Cast iron body - Manual or motorized bending (optional) - After bending, the top roller can be opened to the side for easy material removal - Conical bending device - Manual adjustment of the rear and lower rollers via handwheel - Portable control panel - Compliant with CE standards Options: - Motorized rear roller - Digital display for showing rear roller position - Body cover EURO 314,-- - Hardened rollers EURO 550,-- Iiodpfxsd Ab Tyj Abxec - Variable rotation speed We have many references!

Stanje: novo, Further technical data available on request Technical specifications: Iiodpfx Asd Ab U Uobxoc The machine frame is manufactured from high-strength materials by electric welding and stress-relieved by annealing before machining, to ensure close manufacturing tolerances for the sensitive flanging process. The upper and lower head holders slide along the main body structure for rigidity and reduced vibrations during flanging. Both the upper and lower head holders are driven by hydraulic motors for vertical movement and clamp the head using hydraulic cylinders. The spindle roller is driven by radial piston hydraulic motors for high speed and high torque. The flanging roller is driven by three cylinders for vertical and horizontal movements and slides between two main body structures. Both rollers are made from a special alloy for long corrosion resistance. Centralized lubrication system. Lower support rollers are actuated by hydraulic cylinders to support the head during the flanging process. The hydraulic system consists of a radial piston pump, oil tank level indicator, filter with contamination indicator, and globally recognized brands. Options: Numerous references available!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - The entire frame is made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gears in the gearbox Iiodjd Ab Nhjpfx Abxoc - Mobile control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 2,200 - Digital display for rear roll position indication EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 5 mm Upper roller diameter: 170 mm Technical specifications: - Rear roller powered by motor - Cone bending device Iedpfx Aod Ab Nnobxoic - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending results - Upper and lower rollers driven by brake motors and planetary gearbox - Portable control panel - In compliance with CE standards Options: - Lower roller driven by electric motor: EUR 1,650 - Digital display for rear roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 2050 mm Isdpfx Asd Ab Nwobxeic Sheet thickness: 4 mm Top roll diameter: 130 mm Technical data: - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In accordance with CE standards Options: - Top roll driven by electric motor – EURO 1,260 - Digital display for rear roll position – EURO 1,010 - Hardened rolls – EURO 1,352 - Special voltage – EURO 480 - Material infeed table - Bottom roll driven by electric motor We have a large number of references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 4.5 mm Top roll diameter: 130 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Movement of rear and bottom rolls manually operated - In compliance with CE standards Options: Iiedpfx Ajd Ab Nxobxoc - Top roll driven by electric motor, EUR 1,166 - Digital display for rear roll position, EUR 1,010 - Hardened rolls, EUR 1,117 - Special voltage, EUR 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5.5 mm Top roll diameter: 130 mm Technical specifications: - Back roll driven by electric motor - Cone bending device Iisdpfx Abjd Ab Nyoxjc - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Movable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,166 - Digital display for back roll position EURO 1,010 - Hardened rolls EURO 799 - Special voltage EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1850 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 6 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Approx. weight: 16,000 kg Dimensions (LxWxH): 13,200 x 2,800 x 2,300 mm Table change time: 15 sec Max. speed: 120 m/min The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with premium-class standards. Capable of handling up to 30,000 W of laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and installations. It is an ideal cutting machine for anyone wishing to outsource cutting operations. The system enables easy blowing, cutting, pausing, calibration simulation, etc. via wireless remote control. Standard nesting software quickly prepares parts for cutting without operator intervention, and also features a Flycut function. Equipped with a dual exchange table, allowing continuous operation with no downtime. All our machines are manufactured to European standards and have CE certification. Our FLC-type machines feature nozzle cleaning and a dual camera system. Available cutting bed sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with an autofocus and active anti-collision function, as well as an Auto-View feature, which detects obstacles and automatically repositions. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made from welded aluminum alloy sheet construction and are monolithic. The one-piece design ensures rigidity and shape retention, preventing deformation under impact, load, or overlapping. Additionally, thanks to their structure being three times lighter than steel profiles, higher speeds and acceleration can be achieved with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focusing head - Nesting software - 19-inch touch CNC controller - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring Iedpfxjtwtnzs Abxsic - Automatic lubrication system - Dual camera

Stanje: novo, Pressure: 100 Cylinder: horizontally adjustable Stroke: 350 Frame width: 1500 Working speed: 2 Rapid traverse: 28 Length: 2400 Width: 1000 Height: 2250 Weight approx.: 1500 Cylinder horizontally adjustable: 1150 – Cylinder horizontally adjustable – 1150 mm Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – user-friendly control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated pressure gauge – allows precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work Iedpfx Aewwngysbxeic The image is a sample photo

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm Isded Ab H Sopfx Abxoic High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: novo, Working width: 1,500 mm Working length: 3,000 mm Accuracy +/-: 0.05 mm Max. loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approx. weight: 7,900 kg Laser power: 2 kW Max. material thickness St 37-42: 14 mm Max. material thickness St 37-42 (other spec): 4 mm Max. for stainless steel: approx. 5 mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a laser cutting machine with high efficiency and premium-class standards. It can handle a laser power of up to 30,000 W and is therefore a very good choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing components in the production of agricultural machines, textile machinery, food machinery, construction equipment, elevators, and other large machines and systems. It is an ideal cutting machine for anyone looking to outsource their cutting work. Convenient features like wireless remote control allow for easy blowing, cutting, pausing, calibration simulation, etc. A standard nesting software program quickly prepares parts for cutting without operator intervention. It also features a flycut cutting function. As it is equipped with a double shuttle table, you can continue cutting without downtime. All our machines are manufactured to European standards and come with CE certification. Our FLC-type machines feature automatic nozzle cleaning and a dual-camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head includes autofocus, active anti-collision function, and auto-view function that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges used on all of our machines are a single-piece welded structure made of aluminum alloy sheets. This one-piece construction ensures the rigidity of the bridge and prevents deformation from impacts, overlaps, or loading. Additionally, compared to steel profile bridges, the three-times lighter construction enables higher speeds and accelerations with lower motor power. Included accessories: - Water chiller - Switch cabinet cooling - Automatic focus head - Nesting software - Touch 19-inch CNC controller - Flying cutting - Nozzles and lenses incl. starter kit - Parts and slag drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote inquiry - Automatic lubrication system - Dual camera system Laser type: Enclosed design CNC unit: Cyp Cut Autofocus: Yes Working area: 1,500 x 3,000 mm Repeat positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Max. speed: 120 m/min Max. acceleration: 1.2 G Max. load capacity (per table): 1,250 kg Resonator: Han's source Table change time: 15 s Laser cutting head: Raycus autofocus Power supply: 380 V 50 Hz (three phase) Graphic formats: dwg / dxf / stp Chiller: Available Ijdpstqy Tfofx Abxsic Average machine dimensions: 2,200 x 8,100 x 2,560 mm

Stanje: novo, Bending length: 4100 mm Sheet thickness: 16 mm Top roll diameter: 390 mm Technical specifications: Iiodpfx Abod Ab Svsxec - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls are mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 12,516 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 25 mm Top roll diameter: 390 mm Technical data: Iijdpod Ab Swsfx Abxjc - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Material infeed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 10,540 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 20 mm Top roll diameter: 360 mm Technical data: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls are mounted on bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically driven Options: - Variable rotation speed: EUR 4,682 - Material feed table: on request - Oil cooler: EUR 1,040 Iiedped Ab S Asfx Abxoc - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 20 mm Top roll diameter: 300 mm Isdpfx Absd Ab Taexsic Technical specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Hydraulic upper roll cover, openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 8,400 We have numerous references!

Stanje: novo, Bending length: 4100 mm Sheet thickness: 6 mm Top roll diameter: 270 mm Technical specifications: Isdpfx Abed Ab Tboxjic - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically driven Options: - Variable rotation speed EURO 4,682 - Sheet feeding table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 9,660 We have numerous references!

Stanje: novo, Shaft diameter: 50 mm Roller diameter: 155 mm Working speed: 4.5 m/min Motor power: 1.5 kW Length: 750 mm Width: 1000 mm Iodpfx Asd Eqqwsbxjic Height: 1400 mm Weight approx.: 400 kg Technical data: - Steel frame - Two directly driven rollers - Rollers are hardened - Roller shafts made of special steel, hardened and ground - Roller shafts mounted in bearings - Standard rollers - Guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Lateral angle guide rollers EUR 1,100 - Double working speed EUR 700 PK 35 File type Size Min. Dia Notes 1. 60x10 40x10 500 400 Standard Rolls 2. 100x15 60x10 450 350 Standard Rolls 3. 35x35 20x20 900 300 Standard Rolls 4. Ø35 Ø30 600 400 Optional Rolls 5. Ø70x2 Ø30x2 1,000 500 Optional Rolls 6. 2”x2.9 1”x2.3 1,000 350 Optional Rolls 7. 70x30x2 50x40x3 1,200 1,200 Optional Rolls 8. 50x3 40x3 1,700 600 Optional Rolls 9. 50x50x5 40x40x5 800 600 Optional Rolls 10.50x50x6 30x30x3 1,000 500 Optional Rolls 11.60x7 30x4 700 400 Standard Rolls 12.60x7 30x4 800 500 Standard Rolls 13.60x7 30x4 700 500 Standard Rolls 14. UPN 80 UPN 30 1,000 500 Optional Rolls* 15. UPN 80 UPN 30 1,200 800 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are based on plate yield strength of 260 N/mm²

Stanje: novo, Pressing force: 50 Bending length: 2040 mm Frame width: 2040 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 3170x1960x2500 mm Approximate weight: 4850 kg Motor power: 11 kW CNC crowning via controller: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-5020 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and represent the technology of tomorrow thanks to their flexibility and reliability. The higher speed and precision of this new generation of machines offers greater efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology. Equipped with extensive experience and quality. Standard Equipment: KK-Industries is the general representative of the DENER group of companies. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake by KK-Industries, made by DENER: Technological Advantages: Model REVOLUTION DDM The CNC servo-electric press brake stands out for its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full usable length between frames - Lower maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66 T 17" touchscreen - Y1, Y2, X, and R axes CNC-controlled via the controller - CNC crowning via 3D controller - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes - We make no compromises on the punch and die: the CNC Servo Electric Press Brake KKI REVOLUTION is equipped with quality tooling from EUROSTAMP Italy. - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servo motors on linear guideways and ball screw - Naturally, every machine is only as good as its service. That’s why we focus on highly-qualified engineers with extensive experience in CNC sheet metal processing. - Laser safety device on upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 – R Type backgauge Iodpfx Asd Etfysbxsic - X-Prime Type backgauge - Hydraulic upper and lower tool clamping systems - CNC 3D touchscreen control DELEM DA-69T We recommend the following options: - Manual crowning ¤ 2,329.00 - CNC crowning ¤ 4,658.00 KK-Industries GmbH

Stanje: novo, Shaft diameter: 480 mm Working speed: 3-6 m/min Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: - Welded frame made of steel construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal working position Ijdpfxoh Alh Rs Abxjic - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital readouts (2 units) Options: - STANDARD digital readout - NC unit 10 Screen EURO 11,500,--