Poliranje Postaja nakup rabljenega (782)

Stanje: dober (rabljeno), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing these units. The assembly station is enclosed by a protective housing. The service doors are equipped with monitored locking switches (interlocks). During automatic operation, the doors are locked and can only be opened during an automatic stop or in manual mode after pressing the 'Door' button on the control panel. Automatic operation cannot be started when a door is open. Functional Sequence The station is loaded via the transfer conveyor with the pre-assembled module. Below is a description of the steps performed in the automatic station during the processing of one workpiece carrier (WT). In normal operation, all 3 stations run in parallel. - Positioning the WT with the pre-assembled module in station 2.1 - Lowering of the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), cross-check with the database - Verifying correct latching of the FFC (flexible flat cable) in the connector - Raising the carrier and lowering the WT onto the conveyor belt - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the conveyor belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection hood and contacting, moving the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and keys - Function test of the CD eject button - Lowering the WT onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen and can be rectified if possible. To do this, switch to manual mode and open the doors. After repair and restarting automatic operation, the WT is checked again in the station. If repair is not possible (e.g., screwdriving error), the WT is marked as NIO (not OK) in the control system and is no longer processed. Manual NIO marking and discharge is also possible. Fodpfxoibiche Aplspg Financing through our bank is also available. komplett-konzept.leasingo.de Additional new and used assembly stations—find them in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Foam dosing station with foam mixer and applicator The system operates similarly to the SUPRA MIX concept. Multiple chemicals are metered and mixed in a controlled ratio with water and air. Recipes are stored in the controller and can be changed during operation. Foam applicator with mixer • Dynamic foam mixer with online dosing of 5 products plus water • 5 dosing pumps • One direct inlet for the mixture • Product monitoring for chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For single-piece carpets up to 1 m width Applications - Stain blockers - Dirt, water and oil repellents - Fluorocarbons - Antistatic agents - Softeners - Flame retardants - Antibacterial chemicals - Moth and beetle repellents - Pile stabilizers - Anti-shedding agents - Resins for wrinkle resistance and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam throughput: 50 - 500 l/min Electrical data Connected load: 6 kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions: HxWxD = 1400 x 2100 x 860 mm Year of manufacture: 2007 Purchase price: €47,600 Financing through our bank is also available. komplett-konzept.leasingo.de Fjdpfx Asu D E A Doplepg Discover more items – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), ZIM Hülsta Uređaj za podizanje i postavljanje korpusa Uređaj za podizanje korpusa služi za uspravljanje i daljnji transport montiranih korpusa. Uglavnom se koristi kod preša za korpuse s prolaznom funkcijom. Olakšava rukovanje pri postavljanju velikih radnih komada. Transportni i montažni uređaj unutar linije za montažu korpusa. Iza prolazne preše za korpuse, prešani korpusi se pomoću ovog uređaja polažu na stražnju stranu. Tako se omogućuje montaža na donjoj strani. Fedpfovdb Ixex Aplspg Proizvođač: ZIM Hülsta-Werke Tip: Uređaj za podizanje korpusa Dimenzije: Valjkasti transporter (D x Š x V): 2800 x 900 x 800 mm Širina valjka: 800 mm Nagibna površina (D x Š): 1000 x 900 mm Napajanje: 3x400 V AC Instalirana snaga: 2 kW Financiranje putem naše banke također je moguće. komplett-konzept.leasingo.de Više novih i rabljenih artikala pronađite u našoj trgovini! Međunarodni troškovi dostave na upit!

Stanje: dober (rabljeno), Leto izdelave: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utilities Modular medium-voltage switchgear system for solar power distribution Switchgear details: Manufacturer: Horlemann Switching configuration: KKÜHTTT Model: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) Degree of protection: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin iPrimary voltage: 10 kV Secondary voltage: 400-230 V Connection: Dyn5 Year of manufacture: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The pressure relief of the switchgear is provided via a pressure relief chamber in the lower section of the switchgear panel. Documentation: Test report Wiring diagram Financing is also available through our bank. komplett-konzept.leasingo.de Fodpenfu Dyofx Apljpg You will find more new and used items in our shop! International shipping costs on request!

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 10.000 l, Diesel refueling station – On-site refueling station – Commercial refueling installation – consisting of: 1 x storage tank, 10,000 liters capacity, used 1 x fuel dispenser, model Eco 75, brand new Storage tank description: According to DIN 6616-D, above-ground, double-walled, including test certificate. The tank is supplied with two saddle feet, a manhole with dome cover, is used, internally emptied and professionally cleaned, equipped with the following fittings: - 1 fill pipe with TW cap (filler cap) and dip pipe - 1 gauge pipe with dipstick and dipstick closure - 1 vent pipe with ventilation hood Fpedpfxji An Ufe Aplsg - 1 brand new overfill prevention sensor with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection liquid The tank will be newly primer-coated and painted externally (RAL color tone). L = approx. 5.30 m - D = 1.60 m - Weight approx. 2.4 t - ex works, loaded free of charge Fuel dispenser description: Model Eco 75 – not suitable for calibration (non-legal-for-trade), Delivery rate up to approx. 75 l/min, suitable for diesel fuel, including: - Fuel management terminal with connection to myTecalemit Cloud - Incl. web-based tank data management software – Basic module - 2 ID systems for driver/vehicle, max. 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine-mesh strainer - 4 m hose DN 25 with type-approved automatic nozzle, including swivel joint and nozzle holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Memory for up to 10,000 fueling transactions - Menu guidance in German, English, and French Magnetic keys / transponders are additionally required. General: You will receive an invoice with VAT shown separately. Purchase subject to our General Terms and Conditions. Other tank systems (new and used) as well as rental systems are also available! Additionally, we purchase existing tank systems and can, with certified specialist qualification according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Leto izdelave: 2000, stanje: kot nova (razstavni stroj), številka stroja/vozila: 13:000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG) Dear Sir or Madam, We are pleased to offer a 13,000-litre double-walled storage tank for diesel storage as follows: - Nominal capacity: 13 cbm - Quantity: 1 - Used, but fully overhauled – i.e. the tank has been cleaned, fully refurbished, primed, and painted - Colour finish: lacquered according to RAL colour chart; custom colours available upon request - Material: steel-in-steel, material grade S235JRG2 - Documentation: Manufacturer’s certificate/test certificate in accordance with DIN 6616 D/2 and nameplate - 1 dipstick - 1 vent connection - 1 fill connection - 1 new overfill prevention device - 1 new leak detection unit with filled leak detection fluid - 1 ladder - 1 suction line - Design: cylindrical storage tank with feet/bracket Tank dimensions: - Length: approx. 6,800 mm + diesel pump 500 mm - Diameter: approx. 1,600 mm - Weight: approx. 2,800 kg Aboveground storage Compact diesel dispensing system AF 3000 (new), hose length 4 m (longer on request) Approved automatic fuel nozzle. Pump: 230 V, max. 65 L/min or 230 V, max. 90 L/min ===== Top offer: Liquid fertilizer – AHL tank systems available from 10,000 to 100,000 litres. Naturally, you can help design your own tank system! All our systems are thoroughly checked and inspected by selected, experienced staff within our company. Affordable delivery can be arranged on request. Fpsdpfecl Sb Rox Aplsg Inspection of our systems is possible at any time. Further tank systems for aboveground and underground storage in all sizes are available and can be viewed and purchased on our premises. Have we convinced you with our offer? If you have any questions or requirements, simply give us a call. One of our experienced staff members will be pleased to advise you. Price/Shipping The price for the tank station is ex-works Warstein, loaded free of charge onto your vehicle. Delivery is available at an additional, cost-effective rate. Delivery time: immediate You will receive an invoice with VAT shown separately. In addition, we buy existing tank systems and, as a certified specialist according to the Water Resources Act (WHG), we can professionally empty, clean, dismantle, and transport them away. Best regards from Warstein Tank & Environmental Protection Wozniack

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 126375/99-274723, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu do 31.12.2025! Ponudba vsebuje: Stahl Zi52/4-Fi52 (leto izdelave: 1999; serijska številka: 126375/99-274723) Stahl KBK 52 (leto izdelave: 1999, serijska številka: 121492/99-271702) Fpjdpfx Aexyfmaspleg Pregibni valji stroja so bili zamenjani. Stroj je treba nastaviti ročno.

Stanje: novo, NEW MACHINE - Double-sided belt grinding and polishing machine, various configurations available, for seated or standing operation - Grinding / Grinding - Grinding / Polishing - Polishing / Polishing Fpedeci Tlijpfx Aplsg Motor 4, 5.5 or 7.5 kW, maximum polishing wheel size 120 x 500 mm, maximum diameter of contact wheel 400 mm, sanding belt 50 x 3500 mm - 3 different speed settings selectable: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm.

Stanje: novo, Ceramic and plastic grinding media, fine grinding media, polishing media, polishing balls, Tristar, triangle, cylinder, trident, ellipse pyramid, cone... Further information available in the PDF file. Price on request. Fsdpobdf Evjfx Apljpg

Stanje: novo, NEW MACHINE Fodeci Tkujpfx Aplopg - Double-sided belt grinding or polishing machine, various configurations possible - Grinding / Grinding - Grinding / Polishing - Polishing / Polishing Motor: 4 kW, polishing wheel max. 120 x 500 mm, max. diameter of contact wheel 400 mm, sanding belt 50 x 3500 mm

Stanje: dober (rabljeno), Attachment polishing machine HAU HR 4 for rotational parts up to a maximum diameter of 200 mm, featuring 2 processing units. The units are equipped with overhauled spray guns for liquid polishing compound. Maximum wheel diameter: 400 mm, maximum wheel width: 120 mm, shaft diameter: 35 mm. Machine similar to illustration. Fodszmbhopfx Aplspg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Double-sided polishing stand type 72730 by METABO with 5.5 kW motor, 1500 rpm, including two polishing protection hoods. The machine has been overhauled: sandblasted, newly painted, new bearings for both motor and polishing shaft, new V-belts. Fpjdpfx Apsfw Uzxelsg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Ponujamo pipetirno postajo s pipetami v brezhibnem stanju. Pipetirna postaja CyBi-FeliX s CHOICE Head, 8-kanalni Choice adapter 10-1000uL in 0,5-50uL. Leto izdelave: 2021. Znamka: Analytik Jena. Model: Cybio Felix Choice. Osebni prevzem v Olsztynu (Poljska, Poland). Fpsdpfx Aoumtkaepleg

Stanje: dober (rabljeno), Leto izdelave: 2014, Tecna 3484 Universal Spot Welding Unit 8 kVA Universal welding station 8 kVA with hand-operated gun, dual program. Simultaneous connection of two tools with automatic retrieval of the corresponding welding program, which saves time and prevents errors for a simple and safe workflow. Bodywork repairs: resistance spot welding of sheet metal, straightening with dent puller (nails and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheets. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, welding current setting, and compensation function. Power supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Maximum welding power: 35 kVA Maximum secondary current: 6.4 kA Fedpfxel Smn Sj Aplspg Thermal current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg Financing through our bank is possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer’s description, all information without guarantee. Features - Save time with rapid, fully automated isolation of high-quality DNA, RNA, and mRNA. - Achieve reliable, reproducible results. - Benefit from high flexibility regarding sample type and volume, as well as elution volume and post-elution processes. - Enjoy software-assisted setup of reagents and consumables. - Automated pipetting of PCRs into LightCycler® capillaries (LightCycler® sample carousel), LightCycler® 480 multiwell plates (96-well), PCR plates, strips, or tubes. Product Description The MagNA Pure LC instrument is a benchtop device designed for the rapid, cross-contamination-free preparation of nucleic acids and PCR setup. A fully enclosed housing, automatic clot and tip loss detection, as well as sample tracking, make the MagNA Pure LC instrument a true “walk-away” solution. Filtration, centrifugation, and other manual steps are completely eliminated. No vacuum pumps or tubing are required. The piston-driven 8-channel nozzle head and direct-displacement liquid handling minimize the risk of cross-contamination to an absolute minimum. UV decontamination and the HEPA filter system provide maximum safety for samples and the environment. Condition: used, untested Scope of delivery as shown Fpodpfxsh Dpxhe Aplog Financing through our partner bank is also possible. komplett-konzept.leasingo.de You will find more items – both new and used – in our shop! International shipping costs available upon request!

Stanje: dober (rabljeno), Just Normlicht Proof kontrolna postaja Idealna kot kontrolna miza za tiskarski stroj. Fodpfx Apew Ed S Ieljpg Napajanje 230 V 3 predali + omarica z vrati. Predal za tipkovnico. Elektronsko upravljanje svetlobe (svetlobna jakost).

Stanje: novo, Disc diameter: 250 mm Grinding wheel dimensions: 250 x 25 x 20 mm Speed: 2,850 rpm Voltage: 400 V Total power requirement: 2.0 kW Machine weight approx.: 23.0 kg Required space approx.: 600 x 290 x 300 mm Features: - Heavy-duty design and high-quality equipment - Ideal for professional use - Perfect for dulling and polishing - Achieves mirror-finish surfaces on various materials - When used with optionally available polishing wheels and compounds - Lockable ON-OFF switch according to IP54 with undervoltage release - Includes motor with copper windings for long service life - Standard with rubber feet for vibration-free operation - High running smoothness due to balanced rotor with quality ball bearings - Attractive machine body made from high-grade die-cast construction - Suitable for polishing metal, plastic and non-ferrous materials Fsdpfjxak H Sex Aplepg Scope of delivery: - Soft polishing wheel - Hard polishing wheel - Operating manual in German

Leto izdelave: 2014, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tukaj ponujamo model NTM310-CXL proizvajalca Nutek. Gre za obračalno postajo/inverter. Dolžina PCB je od 80 mm do 460 mm, širina PCB je ročno nastavljiva od 75 mm do 460 mm z ročnim kolesom. Odstranljiva kapalna kad iz nerjavečega jekla. Smer transporta je z leve proti desni. Trenutna lokacija artikla je Satu Mare v Romuniji; po nakupu je mogoče napravo premestiti tudi v Nemčijo. Fjdpjxgc N Sjfx Apljpg

Leto izdelave: 2005, stanje: dober (rabljeno), številka stroja/vozila: 50 330 008, Offer 21055 Technical Data: - Polishing wheel diameter: approx. 300 mm - Wheel width: approx. 40 mm - Wheel bore: approx. 76 mm Fpjdpfx Apei Dav Deleg - Wheel speed: 1500 rpm - Drive: 400 V / 2.2 kW - Working height: approx. 1150 mm - Machine stand - Space requirement: approx. W 500 x H 1300 x D 250 mm - Weight: approx. 50 kg

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: xxxx, Ref. No. 24265 Technical data: - Shaft mount diameter: 35 mm - Usable shaft length: 90 mm - Drive speed: 1450 rpm Fpjdpfx Ajtx Ubrjpleg - Drive: 400 V / 4.4 kW - Space requirement approx.: W 1300 x H 2500 x D 800 mm - Weight approx.: 200 kg

Leto izdelave: 1990, stanje: dober (rabljeno), številka stroja/vozila: 017003, Offer 13380 Polishing and Buffing Machine with Separate Dust Extraction Technical Specifications: - Polishing wheel diameter up to approx. 250 mm - Polishing wheel speed 1450 rpm - Drive motor 400 V / 1.1 kW - Space requirement approx. W 1300 x H 1100 x D 400 mm - Weight approx. 100 kg Fpjdpfok Ac Azsx Aplsg - Separate motorized dust extraction - Paper filter - Space requirement approx. W 1300 x H 1100 x D 2200 mm - Weight approx. 100 kg

Stanje: generalkompletno obnovljen (rabljeno), 1 overhauled table polishing machine / table polishing automaton, manufacturer HAU, model T1500 (max. part length 1500 mm), with 1 polishing station model PES/3 and one control cabinet. The table was disassembled, inspected for damage (defective parts were replaced), cleaned and repainted. The guide shafts were newly mounted and a new gearbox installed. + Fpjdpfew Au A Eex Aplsg 1 polishing station, model PES/3, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Disc width max. 400 mm, max. disc diameter 400 mm. The station was completely dismantled, inspected for damage (defective parts replaced), cleaned and repainted. The polishing shaft was completely relubricated, including slide bush bearing. The oscillation unit was also newly sealed. New motor, pulleys and drive belts installed. + 1 new control cabinet for operating the above-described system. Table speed and polishing wheel speed can be regulated via frequency inverter.

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Kohlhoff Cleancontrol SL-S/D Hygiene Station/Gate Manufacturer: Kohlhoff Model: Cleancontrol SL-S/D Machine Number: 807705-10 Year of manufacture: 05/2014 Power supply: 400 V, 3-phase Power: 1.2 kW Brush length: 1100 mm Overall dimensions: 2100 × 1800 × 1800 mm Fpedpfx Ajx I Nvkopljg Equipment: - Hygienic gate with turnstile - Sole washer - Hand disinfection unit The Kohlhoff Cleancontrol SL-S/D hygiene station is a comprehensive solution for personnel hygiene control in food processing facilities. The device combines shoe sole cleaning, hand disinfection, and access control via the turnstile, effectively preventing the transfer of contaminants into production areas. A robust design and fully automated hygiene process ensure high cleaning and disinfection efficiency, as well as easy and intuitive operation. The station is designed for intensive use in slaughterhouses, food processing plants, and other facilities with heightened sanitary requirements.

Stanje: dober (rabljeno), Leto izdelave: 2001, The machine is also capable of miter grinding. Connected load: 20.5 kW Overall length: 12,500 mm Fedpfxsiqghzs Aplopg

Leto izdelave: 2017, stanje: rabljeno, Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine - Setup station with: Garant ZERO CLAMP G-11886 Fjdpoflk Hpefx Aplspg - Manufacturer no.: 101545300002672 - 21063 1721559 - Dimensions: 400/400/H810 mm - Weight: 232 kg