Navpična Stružnica - Enojni Stolpec nakup rabljenega (3.908)

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Cjdpotrhf Aefx Ac Nsrc Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 7.950 h, Funkcionalnost: popolnoma funkcionalen, Vertikalni obdelovalni center / Vertikalni stružni stroj Proizvajalec: EMAG Model: VL6 (FANUC) Leto izdelave: 2021 Obratovalne ure: cca. 7950 Skupna teža: 10,5 t Glavno vreteno: 28,5 kW Moč pri 40/100 % ED: 41/28,5 kW Navor pri 40/100 % ED: 491/340 Nm Polna moč pri hitrosti vretena: 800 min⁻¹ Najv. število vrtljajev: 3100 min⁻¹ Premični enoti X, Z Pogonska enota revolverja za gnana orodja (C362) s centralno dovodom hladilne tekočine v orodje Najv. število vrtljajev: 9600 min⁻¹ Polna moč pri 3000 min⁻¹ Navor pri 100 % ED: 33 Nm / 10,4 kW Navor pri 40 % ED: 44 Nm / 13,8 kW Navor pri 10 % ED: 56 Nm / 17,6 kW Držalo za gnana orodja: 12 x BMT65 Skladišče in transportni sistem za obdelovance, transporter tipa O (GO 240") sistem nosilnih prizmov za 10 obdelovancev Višina obdelovanca: maks. 250 mm Teža obdelovanca: maks. 40 kg Cedewzwu Iepfx Ac Njrc Set (10 kos) nosilnih prizmov za premer obdelovanca: 150–300 mm Zračno pihalo za obdelovanec in vpenjalno pripravo (Pick-Up) Dovod hladilne tekočine: 15 bar Zmogljivost črpalke: cca. 80 l/min pri 15 bar Hladilna enota (6,5 kW, voda-zrak) Dvostranski filter hladilne tekočine, ročno preklopljiv Filtrirna finost: 100 μm, z električnim in mehanskim indikatorjem kontaminacije Transporter odrezkov, verižni tip – odvod zadaj Izvedba s tečajnim trakom: odvod zadaj Višina izmeta odrezkov: 1.100 mm (z integriranim rezervoarjem za hladilno tekočino, kapaciteta cca. 500 l) Izvleček emulzijske meglice: zmogljivost cca. 800 m³/h Izpiralna pištola Merjenje obdelovanca s sondo Pihanje sonde Nadzor trajanja orodja (upravljanje nadomestnih orodij) 3-barvni signalni stolp Hitromenjalna vpenjalna glava SMW autoblok KCNS-N400-128 maks. = 3500 min⁻¹ Set trdih osnovnih čeljusti Set mehkih vršnih čeljusti Programska oprema Navodila za uporabo / Navodila za vzdrževanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Max. premer obdelovanca: 400 mm Max. dolžina obdelovanca: 300 mm Max. premer vpenjalne glave: 500 mm Obodni premer: 520 mm Csdpfx Acsxy Ac Se Norc Pomik osi X: 1.110 mm Pomik osi Z: 595 mm Glavno vreteno: moč (pri 40 / 100 % ED): 47/34 kW Glavno vreteno: navor (pri 40 / 100 % ED): 600 Nm Glavno vreteno: največje število vrt./min: 2.850 Krmilje: Fanuc 31i Brez Y osi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ponujamo popolno linijo EMAG, sestavljeno iz 6 strojev (VL3, VL5 in VL5i, glej tipske tablice) z vključeno centralno odvodnjo ostružkov in dovodom hladilnega sredstva. Stroji so v delujočem stanju in jih je možno pod napetostjo preizkusiti v naši tovarni v 47225 Kedzierzyn-Kozle na Poljskem. Z veseljem prodajamo tudi v tujino, a je v tem primeru potrebno posebno pakiranje. Demontaža in čezmorsko pakiranje sta odgovornost kupca. Naveden je znesek za posamezen stroj brez odvodnje ostružkov in hladilnega sistema. Ob nakupu celotne linije zaračunamo 120.000 EUR, in sicer z vključeno odvodnjo ostružkov in dovodom hladilnega sredstva. Credpfx Aou U D E Njc Nec

Stanje: rabljeno, Leto izdelave: 1972, Premer planske plošče 5000 mm Premer vrtenja 6100 mm Višina struženja 2300 mm Krmiljenje Siemens Tip Sinumerik 840D Pogon 55 kW Obremenitev mize 55 t Podpore 2 stružne podpore Dimenzije batiča 340x340 mm Obremenitev mize 55000 kg Število obratov 280 U/min Št.: 149/50384 novo Siemens krmiljenje tip Sinumerik 840D v letu 2015 Dodatna oprema in omare je možno dokupiti po želji Tehnični podatki so podatki proizvajalca oz. uporabnika, zato zanje ne odgovarjamo. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi Crsdpeyqtilefx Ac Nsc več kot 15.000 m² skladiščnih površin, žerjavna kapaciteta 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, kontaktirajte nas. Več ponudb najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 49.479 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik po osi Z: 200 mm, največja hitrost vretena: 7.500 obr/min, premer struženja: 210 mm, stružna dolžina: 100 mm, TECHNICAL DETAILS Max. turning diameter: 210 mm Max. turning length: 100 mm Max. swing diameter over bed cover: 210 mm X-axis travel: 400 mm Z-axis travel: 200 mm Max. workpiece length: 100 mm Max. workpiece diameter: 27 workpieces with 30–85 mm or 18 workpieces with 30–130 mm Max. main spindle speed: 7,500 rpm Main spindle power at duty cycle 10–40/100% max.: 25/16 kW Main spindle torque at duty cycle 10–40/100% max.: 200 Nm Main spindle front bearing diameter: 80 mm Main spindle flange size: Size 5 (DIN 55026) Axes on the main spindle unit: X/Z Turret: lower Number of stations / driven stations: 12/12 Tool holder in turret: VDI 40 Rapid traverse speed X-axis: 60 m/min Cedpfx Acsxu Ekbo Norc Rapid traverse speed Y-axis: 30 m/min Feed force in X/Z main spindle unit: 5,000 N Direct position measuring system main spindle unit: X/Z MACHINE DETAILS CNC control: Fanuc 18i TB Electrical Data Operating voltage: 400/50 V/Hz Main circuit breaker: 80 A Total power requirement: 36 kVA Dimensions & Weight Machine dimensions (LxWxH): approx. 2,500 x 1,900 x 2,300 mm Required floor space for complete system (LxWxH): approx. 3,600 x 1,900 x 2,300 mm Machine weight: approx. 6,000 kg Operating hours: approx. 49,479 h EQUIPMENT Full-stroke cylinder on the main spindle Splash guard enclosure with fully enclosed working area Work area lighting Oil/emulsion mist extraction unit Hinged belt chip conveyor (discharge height: 1,250 mm) Coolant system Continuous parts storage conveyor Automatic central oil lubrication

Stanje: rabljeno, Leto izdelave: 1961, Največji premer struženja: 4200 mm Premer planske plošče: 3700 mm Največja višina struženja: 2600 mm Največja teža obdelovanca: 35 t Moč: 80 KM Codpfsuddnvex Ac Nerc DIGITALNI PRIKAZ KRMILJENJA Največji premer s prečnimi suporti: 4200 mm Največji premer struženja s stranskim suportom: 3900 mm Največja višina struženja nad plansko ploščo: 2500 mm Stranski suport 1 vertikalni brusilni drsnik: 1200 mm hoda (izven obratovanja) 1 stružni drsnik: 1400 mm hoda Samo za natančne aplikacije, ni primerno za težja groba stružna dela.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Swing diameter: 1400 mm Faceplate diameter: 1500 mm Cjdpfx Ajvxa Tpsc Nsrc Control system: Sinumerik 850T Working height: 1400 mm Tool changer: 12 positions Workpiece weight: 5 t Year of manufacture: 1993 Mechanical overhaul: 2010

Stanje: rabljeno, Leto izdelave: 1990, Pressure: 125 t Throat depth: 360 mm Stroke: 8 - 140 mm Installation height (with max. upper stroke and upper ram adjustment): 500 mm Ram adjustment: 100 mm Ram surface: 800 x 400 mm Table surface: 1000 x 720 mm Clamping plate: 990 x 670 mm Clamping plate thickness: 80 mm Strokes per minute: 60 spm Pin hole (depth x diameter): 90 x 50 mm Total power requirement: 23 A Machine weight approx.: 11 t Space required (W x D x H): approx. 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reversing circuit (return stroke) Crsdpfoyatx Esx Ac Njc - Electric stroke counter - Electronic preselection counter - Cam controller The machine is partially overhauled in our workshops as follows: - Disassembled, cleaned, and fully inspected technically - Newly painted (custom colors available on request) - New seals - New control cabinet with touchscreen, incl. machine wiring - Current press inspection

Leto izdelave: 1979, stanje: rabljeno, Pressure: 75 t Throat depth: 260 mm Stroke: 16–80 mm Table surface: 800 x 520 mm Distance table/ram: 350 mm Variable stroke rate: 50–250 strokes/min Ram surface: 400 x 300 mm Cjdpfx Acjfn Ap Dj Nerc Ram adjustment: 70 mm Total power requirement: 7.5 kW Space requirement approx.: 2.7 x 1.7 x 2.6 m Machine weight approx.: 4 t Pass-through opening in table: 260 x 180 mm - Pneumatic Ortlinghaus air clutch with auxiliary brake - Infinitely variable speed control via Stöhrer drive - Shear plate - Two-hand operation - Additional clamping plate - Air reservoir tank for clutch - Oil circulation lubrication

Stanje: zelo dobro (rabljeno), Pressure 125 t Throat depth 400 mm Stroke 6 - 125 mm Ram adjustment 100 mm Installation height (stroke bottom, ram adjustment top) 400 mm Table area 1100 x 750 mm Strokes per minute 60 spm Total power requirement 16 kW Machine weight approx. 10 t Required space approx. WxDxH 1.1 x 1.9 x 3.53 m - Machine partially overhauled - Completely disassembled and technically inspected, - New seals - New pneumatic clutch - New seals in the compensating cylinder - New drive motor - New ball screw - New paint finish - Current UVV inspection and brake time measurement Cedpfot Eix Rox Ac Nerc Machine safe for manual loading operations At extra cost, we can equip the machine as follows: - Workspace protection with light curtain / cycle operation, but only in combination with a new control cabinet (freestanding) with ABB safety controller and touch panel - Two-hand operation on a separate stand

Stanje: generalkompletno obnovljen (rabljeno), Pressure 100 t Outreach 350 mm Codpfjtv N Ibsx Ac Njrc Stroke 20 - 120 mm Table dimensions 1100 x 700 mm Ram dimensions 750 x 450 mm Max. ram adjustment 90 mm Stroke rate 70 strokes/min Stroke rate - stepless 20 - 120 strokes/min Installation height with max. stroke up and ram adjustment up 500 mm Through-hole in table 400 x 300 mm Through-hole in clamping plate 220 x 180 mm Passage in frame to the back 450 x 300 mm Total power requirement 11 kW Machine weight approx. 11.8 t Space requirement approx. 2.1 x 1.3 x 2.8 m Equipment: - Hydraulic clutch - Stepless drive control via frequency inverter - Ram weight compensation - Automatic stroke adjustment - Hydraulic overload protection - Motorized ram adjustment The machine will be overhauled in our workshop as follows: - Complete disassembly, cleaning and technical inspection - New painting - New seals - New V-belts - New control cabinet - New Balluff cam switchgear with ABB rotary encoder - New unidor press force measurement - New operator pendant with touch display - New control cabinet with ABB safety control system - Side working area enclosure with BWS Fiessler The machine is CE-compliant and will receive a 1-year warranty from us after the overhaul. The machine is safe for manual loading operations.

Stanje: rabljeno, Leto izdelave: 1982,

Stanje: rabljeno, Leto izdelave: 1986, Pressure: 40 t Throat depth: 265 mm Stroke: 8 - 95 mm Table dimensions: 660 x 520 mm Codoumm Sqjpfx Ac Nsrc Ram dimensions: 400 x 250 mm Ram adjustment: 80 mm Strokes per minute: 70 - 142 spm Total power requirement: kW (not specified) Machine weight approx.: 4,500 kg Space requirement approx.: 1.245 x 1.585 x 2.37 m - Table clamping plate

Stanje: rabljeno, Leto izdelave: 1990,

Leto izdelave: 1969, stanje: rabljeno, Pressure: 63 t Throat depth: - mm Stroke: 16 - 125 mm Table surface: 800 x 630 mm Ram adjustment: 70 mm Strokes per minute (continuous operation): 80 spm Max. distance table - ram: 417 mm Ram surface: 500 x 400 mm Clamping plate thickness: 70 mm Total power requirement: 6 kW Machine weight approx.: 5.5 t Space requirement approx.: m - Tiltable Codpfx Aeh Dfctsc Nsrc - Ram is equipped with a fracture plate safety device - Table clamping plate - Ram adjustment via ratchet - Balluff cam switch gear Machine is not safe for manual loading/unloading!

Stanje: dober (rabljeno), Leto izdelave: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table through-hole: 100 mm Ram surface: 120 x 100 mm Installation height: 250 mm Codpfx Ajt Tqglec Norc Total power requirement: 1.1 kW Machine weight approx. 1,150 kg Space requirements approx. 0.96 x 1.34 x 1.88 m - Positive-fit Ortlinghaus clutch - Not suitable for manual loading operations - Press has been inspected in-house and delivered with a current DGUV (German accident prevention regulation) certificate

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 160 t Throat depth: 400 mm Stroke: 20 - 160 mm Table size: 1200 x 800 mm Ram adjustment: 100 mm Strokes per minute: 60 spm Ram surface: 860 x 520 mm Total power requirement: 15 kW Machine weight approx. 16 t Space requirement approx. 1.7 x 2.5 x 3.23 m - Additional clamping plate – cross-slotted - Foot switch - Hydraulic clutch - Hydraulic clamping of ball screw - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler Crjdpstqm Dfjfx Ac Nsc Machine can be partially overhauled by us for an additional charge (new paint, new seals)

Stanje: rabljeno, Pressure: 100 t Throat depth: 355 mm Stroke: 8 - 130 mm Table surface: 710 x 1200 mm T-slots in table: 3 Clamping plate thickness: 75 mm Stroke rate: 50/80 strokes/min Ram adjustment: 80 mm Ram surface: 450 x 560 mm T-slots in ram: 2 Bore hole (depth x diameter): 100 x 50 mm Max. distance table - ram: 540 mm Clearance between uprights: 400 mm Connected load: 11.5 kW Machine weight approx.: 9.0 t Machine dimensions: 1.65 x 2.25 x 3.05 m Credjtqm Dhopfx Ac Nec - Increased installation height - Equipped with draw cushion - Converted to safe control system (Pilz PLC), safe for "manual insertion work at open tooling"

Stanje: rabljeno, Leto izdelave: 1983, Press force 25 t Throat depth 225 mm Cjdpfjumm Swsx Ac Nsrc Stroke 8 - 85 mm Table dimensions 560 x 450 mm Ram dimensions 360 x 220 mm Ram adjustment 55 mm Strokes per minute 80 - 160 spm Total power requirement kW Machine weight approx. 2,500 kg Space requirement approx. 1,135 x 1,365 x 2,145 m - Clamping plate for the table

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Clear opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Ram bore: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Die height (max. stroke, ram adj. up): 600 mm Die height (stroke down, ram adj. up): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Space requirement approx. (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in ram - Hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital readout, rapid/creep mode - Fully automatic stroke adjustment, range 16 - 160 mm - Ram weight compensation - Electronic TDC correction - Planetary gearbox - Centralized circulating oil lubrication - Separate control console with screen control SIMATIC S7/300 - Press force measuring device Cjdpfx Acovbk Rwj Nerc - Reversing circuit (return stroke) - Additional operating mode "setup/creep mode" - Electric stroke counter - Electric preset counter - Electric travel limitation of connecting rod pin - Electronic cam controller - Infinitely variable drive (frequency-controlled) - 2 sockets - Clamping plate - Temperature monitoring for main / support / connecting rod bearings - Operating hours counter - Oil cooler - Set of anti-vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Stanje: rabljeno, Pressure: 63 t Throat depth: 315 mm Stroke: 16 - 125 mm Max. distance table to ram: 417 mm Ram adjustment: 70 mm Strokes per minute: 80 spm Table size: 800 x 630 mm Ram area: 500 x 400 mm Total power requirement: 6 kW Machine weight approx.: 5 t Space requirement (L x W x H): approx. 1.5 x 2.2 x 2.75 m The following works will be carried out on the machine / Partial overhaul: - Machine to be disassembled and inspected - Machine will be newly painted - New Vogel lubrication unit Crodpfx Acetqm Dqj Noc - New cam controller - New control cabinet with touch panel and ABB safety control - Prior to delivery, the machine will undergo a current accident prevention inspection (UVV test) and brake time measurement

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and Cedpfx Astycdkjc Nerc will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement

Stanje: rabljeno, Leto izdelave: 1998, Pressure: 80 t Outreach: 335 mm Stroke: 8 - 100 mm Strokes per minute: 60/90 spm Table size: 900 x 670 mm Table through opening: 280 x 200 mm Cedpeuild Aefx Ac Norc Maximum installation height: 450 mm Ram adjustment: 80 mm Ram area: 700 x 450 mm Maximum tool size: 700 x 450 mm Maximum tool weight: 140 kg Total power requirement: 11.07 kW Machine weight approx.: 6.5 t Space requirements approx. (WxLxH): 1.72 x 2.0 x 2.82 m Features: - Gear train - Hydraulic clutch - Large ram - Pneumatic ram weight compensation with air tank mounted on right side of frame - Oil lubrication, manufacturer: Vogel - Semi-automatic stroke adjustment - Hydraulic ball screw adjustment with manual clamping - Mechanical overload protection (shear plate) - Ram adjustment with Siko counter - Clamping plate for table - Monitored ram top-hold device - Control cabinet on console at right machine stand - Foot switch - 1 set of vibration-damping elements - Operating manual / EC Declaration of Conformity The machine will be technically inspected in our workshop and will receive a current press inspection as well as: - Oil change - Filter change - Replacement of hoses

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1986, Funkcionalnost: nepreverjeno, 2 stroja kot donatorja rezervnih delov. Servomotorji GLAVNI VRETENSKI MOTOR TRANSPORTER OSTRUŽKOV VPENJALNA GLAVA HIDRAVLIČNA ENOTA CENA na tono Cedpfx Acsixtm Ns Norc