Johann Rein Merilnik Sile nakup rabljenega (1.572)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany Psdpfx Agsfdkb Tjxepr - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) Pedpfxod Tbbde Agxopr - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. Ppjdpfxjd Tqals Agxsr The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support Ppsdsfdkb Uopfx Agxer - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm Psdpfsguk A Hsx Agxspr - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Ppsdpofdkbhofx Agxor - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Podpfxjguk Dks Agxopr - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: Ppedpfeguk Dvex Agxjr - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2026, Ultrazvočna pralna naprava – ultrazvočni čistilni stroj kupljeno iz stečajne mase – novo naprava, neuporabljena! Proizvajalec: Derui Ultrasonic Naprava v celoti izdelana iz nerjavečega jekla - Spodnji ultrazvok, multifrekvenčni: 25/45 kHz preklopno, moč (efektivna/vršna): 1.600/3.200 W Ppedpfx Aeyz N Exegxer - Ogrevanje nastavljivo do 80°C; moč: 2.500 W - Dimenzije košare: D x Š x V 530 x 400 x 300h mm - Dimenzije posode: D x Š x V 550 x 420 x 320h mm - Zunanje dimenzije: D x Š x V 650 x 560 x 830h mm - Teža naprave (prazna): 115 kg - Naprava je premična na kolesih - vključno z izoliranim pokrovom - vključno z 1 kosom košare iz nerjavečega jekla Brez jamstva, ker je kupljeno iz stečajne mase.

Stanje: novo, Leto izdelave: 2026, Ultrazvočna pralna naprava – Ultrazvočni čistilni stroj kupljen iz stečajne mase – nov, neuporabljen stroj! Proizvajalec Derui Ultrasonic Stroj v celoti izdelan iz nerjavečega jekla - Talni ultrazvok, večfrekvenčni: preklopno 25/45 kHz, moč (efektivna/vršna): 1.000/2.000 W - Ogrevanje nastavljivo do 80°C; moč: 1.500 W - Mere košare: D x Š x V 400 x 350 x 280 mm Podoyz Nu Tjpfx Agxepr - Mere bazena: D x Š x V 420 x 370 x 300 mm - Zunanje mere: D x Š x V 520 x 510 x 810 mm - Teža stroja (prazno) 85 kg - Stroj je premičen na kolesih - vključuje izoliran pokrov - vključuje 1 kos košare iz nerjavečega jekla Brez garancije, ker je kupljeno iz stečajne mase

Stanje: potreben popravila (rabljeno), Enota za obdelavo pločevine, razvijalnik, ravnalnik, giljotinske škarje, Reinhardt Maschinenbau GmbH Ras 228.60 Rabljeni stroj Proizvajalec: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Največja širina pločevine: 1500 mm Največja debelina pločevine: 1,5 mm Ppodpjvkbrqefx Agxjr Skupna teža: 9350 kg Značilnosti: • Razvijalnik • Merilna enota • Ravnalnik pločevine • Giljotinske škarje Električni podatki: Napetost: 400 V Moč: 12 kW Frekvenca: 50 Hz Tok: 35 A Opomba: Prikazovalnik na upravljalni plošči ne deluje.

Stanje: rabljeno, Leto izdelave: 1996, Sušilnik materiala - Reinhardt Ppedpfx Aoyzgchegxor Tip: LTA 100 S Leto izdelave: 1996 Obratovalna temperatura: 50-200°C

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, dolžina rezanja (maks.): 2.700 mm, širina obdelovanca (maks.): 110 mm, Optimizing crosscut saw from 2021. The Paul Reinhardt SlimLine 110 is an automatic crosscut saw suitable for wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking for a high-quality cutting machine, consider the Paul Reinhardt SlimLine 110, which we are offering for sale. Please contact us for further details. • Condition: Not refurbished – sold without warranty • Cutting direction: right to left • Wood types: MDF, chipboard, solid wood, Kerto, plywood Pjdpfjy Dru Uox Agxjpr • Workpiece dimensions: • Length: 300-3000 mm • Width: 30-350 mm • Minimum cross-section: 15 x 30 mm • Maximum cross-section: 58 x 125 mm • Processing: automatic cutting • Working height: 900 mm • Electrical connection: 400 V / 50 Hz / 3 Ph • Main motor: 5.5 kW (400 VΔ / 690 VY, 50 Hz) • Control: Electronic control with Windows 10 and Beckhoff TwinCAT • Optimization: Full optimization without fault shutdown Additional equipment • Infeed with 3 buffer stations (infeed buffering/automation) • Software/add-ons: • Residual material monitoring • PALETTI Process Viewer • PALETTI Office

Stanje: rabljeno, Kapna žaga REINHARDT RKP 160 S - rabljena - Dvoročno upravljanje ----- Tehnični podatki ----- Pjdpey Egxksfx Agxjpr Maks. višina reza: 210 mm, Maks. premer žaginega lista: 600 mm, Dolžina dovajalnega valjčnega transportnega traku: 3.500 mm, Dolžina odvajalnega valjčnega transportnega traku: 2.500 mm, Motor: 5,5 kW

Stanje: rabljeno, Mehanizacija Vhodna dovajalna naprava sestavljena iz 1 x transportnega traku z ustavljalcem in izmetalcem 1 x valjčne proge 1 x prečna pomična enota s servomotorjem na primer idealno za: A) pred skobeljni stroji z večlistno žago B) pred razdelilno tračno žago ali drugo žago C) na vhodu pred druge stroje V stanju kot stoji in brez električnega krmiljenja MOŽNOST Pedpfxor Eh Uhe Agxopr Električno krmiljenje na zahtevo in za doplačilo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.315 mm, skupna višina: 1.410 mm, skupna dolžina: 2.030 mm, premer briketa: 40 mm, kapaciteta rezervoarja za olje: 100 l, dolžina vijačnega transporterja: 1.595 mm, moč: 4 kW (5,44 KM), leto zadnje generalne obnove: 2025, širina odprtine za polnjenje: 1.044 mm, Stroj je popolnoma delujoč, v zelo dobrem stanju. Če potrebujete dodatne podrobnosti, nam prosim sporočite. Ppjdpfx Agex I Abaoxjr

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, sesalna zmogljivost: 3.900 m³/h, vhodna napetost: 400 V, moč: 1,5 kW (2,04 KM), Oprema: dokumentacija / priročnik, kabina, nujno zaustavitev, osvetlitev, The Reinox Mini 100x80 professional spray booth is the ideal solution for wet painting of smaller parts in explosion-hazard environments (ATEX certified). This compact booth offers high extraction performance and efficient filtration, ensuring high-quality surface finishing and a safe working environment. !!This is a brand new machine!! Production lead time: 2 weeks Technical specifications: - Fan is ATEX certified - Working area: 990 × 800 × 1,100 mm - Overall dimensions: 1,100 × 1,900 (+600 mm engine) × 1,100 mm - Fan power: 1.5 kW (ATEX certified) Pedpsia Tabofx Agxepr - Fan suction capacity: 3,900 m³/h (max. 1,300 Pa) - Lighting: 1 × 2 × 18 W (ATEX certified) - Connection voltage: 400 V - We use a control panel made from high-quality and proven components, guaranteeing high reliability, easy operation, and long service life of the machine. - Control panel complies with: CSN 16985 - Frequency inverter: Fan speed regulation via a potentiometer directly on the booth control panel. - Filtration: Two-stage 1st stage – cardboard filter 2nd stage – Paint stop Certification: CE, ATEX Warranty: 12 months Available in all-stainless-steel version upon request. The machine can also be ordered in various individual configurations and dimensions! Please do not hesitate to contact us.

Stanje: rabljeno, Leto izdelave: 2002, Geeignet zum automatischen Schleifen von Werkzeugen aller Art. Zubehör: Vollverkleidung Bandfilteranlage Knoll E53319 Software Numrotoplus Software Numroto einfache Fräser und Kordel, Software Numroto einfache und komplexe Bohrer Palettenlader CNC-Handrad Schaltschrankkühler, automatische Reitstock automatische Zentralschmierung Glasmaßstäbe an den Linearachsen X, Y, Z Meßtaster hydraulische Werkstückklemmung Ölauffangwanne 2 Laderpaletten, 1 Schleifscheibenaufnahme, Verfahrweg X-Achse: 800 mm Verfahrweg Y-Achse: 270 mm Verfahrweg Z-Achse: 660 mm Verfahrweg B-Achse: 400° Eilgänge: 30/15/30 m/min Werkzeugaufnahmekonus: ISO 50 Schleifspindelantriebsleistung: 12 kW Schleifspindeldrehzahl stufenlos: max. 9000 U/min., Psdpfx Agoyv Hv Rsxspr Schleifscheibendurchmesser: max 203 mm Anschlußwert ca.: (400 V /50Hz) Abmessungen L x B x H: 1900 x 2300 x 2300 mm Gewicht ca: 5400 kg Farbe: Grau / Gelb

Stanje: novo, Leto izdelave: 2025, Two tables are connected in tandem operation for a combined load capacity of 5000 kg. Technical description with the following main data: Capacity: 3000 kg static distributed load Lift stroke: 800 mm Closed height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: smooth sheet steel Lifting time: approx. 18 sec for full lift stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable Motor: 2.2 kW, 1,400 rpm Solenoid voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Power unit: integrated in the lift table Control box: deadman control incl. 2 m cable Total weight: approx. 330 kg Tandem control for synchronized movement. Note: 100% synchronization cannot be guaranteed. Any height differences that occur will be compensated in the base or upper position! The safety edge strips of the two lift tables are NOT interconnected. Ppodpfxjk E Hmte Agxjr Minimum distance of 500 mm between the lift tables. Maximum distance of 3000 mm between the lift tables. Self-supporting base frame with 4 flange wheels in which the lift table is mounted. 4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel. Height increased by approx. 50 mm.

Stanje: rabljeno, Various micrometers from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale value: 0.01 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125 mm Scale value: 0.01 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale value: 0.01 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale value: 0.01 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50 mm Scale value: 0.01 mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95 mm Scale value: 0.01 mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale value: 0.01 mm Pos8 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale value: 0.01 mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale value: 0.01 mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale value: 0.01 mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100 mm Scale value: 0.01 mm Locking screw missing Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100 – 125 mm Scale value: 0.01 mm Pos16 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale value: 0.01 mm Pos17 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale value: 0.01 mm Pos19 Manufacturer: Hommel Werke Measuring range: 200 – 225 mm Scale value: 0.01 mm Pos23 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale value: 0.01 mm Pos26 Manufacturer: Kern Measuring range: 0 – 25 mm Scale value: 0.01 mm Pos28 Manufacturer: Unknown Measuring range: 70 – 95 mm Scale value: 0.01 mm Ppjdjyhmwqopfx Agxor Pos29 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale value: 0.01 mm Pos30 Manufacturer: Mitutoyo Measuring range: 25 – 50 mm Scale value: 0.01 mm Pos35 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale value: 0.01 mm Pos36 Manufacturer: Mahr Measuring range: 145 – 170 mm Scale value: 0.01 mm Pos37 Manufacturer: Mahr Measuring range: 170 – 195 mm Scale value: 0.01 mm Pos38 Manufacturer: Steyr Measuring range: 150 – 175 mm Scale value: 0.01 mm Pos39 Manufacturer: Steyr Measuring range: 175 – 200 mm Scale value: 0.01 mm Pos40 Manufacturer: PAV Measuring range: 250 – 275 mm Scale value: 0.01 mm Thread micrometers – outside micrometers Micrometer – frame-type micrometers – measuring instrument (e.g. for gear inspection) – outside measuring tool – disc micrometer – precision micrometer – fine measuring instrument – outside micrometer Price per unit: €35 net, ex-works, plus packaging costs All technical data subject to possible typographical errors. Sale strictly within EU countries only.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EcoPurge30,

Stanje: dober (rabljeno), Orodje za rezkanje zobnikov, modulne rezkalne glave, odvalne rezkalne glave, profilne rezkalne glave za zobe, modulna rezkalna glava, valjaste čelne rezkalne glave, valjaste rezkalne glave, rezkala, odvalna rezkalna glava, odvalna rezkalna glava za klinaste gredi, odvalna rezkalna glava za zobnike, odvalna rezkalna glava za čepke, rezkalna glava za zobate letev - Proizvajalec: Reinecker, 2 kosa odvalnih rezkalnih glav - Tip: Mod.3 Ø 70 mm / Ø 67 mm KHSS-E - Vpetje: Ø 27 mm Psdpfey D Nkmjx Agxjpr - Cena/dobava: komplet - Transportne dimenzije: 135/70/H70 mm - Teža: 2,1 kg

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 6929 TEHNIČNI PODATKI - dolžina obdelovanca: 2800 mm - širina obdelovanca: 950 mm - glavni motor: 5,5 kW - motor ventilatorja: 2,2 kW - širina brusnega traku: 160 mm - premer odsesovalnega priključka: 185 mm - rotacija desno/levo - skupne dimenzije (d/š/v): 4080x1800x1400 mm - teža približno 1000 kg PREDNOSTI – ni prebarvana – nemška proizvodnja – tehnična dokumentacija DTR – rabljeni brusilnik, zelo dobro ohranjen Neto cena: 8900 PLN Neto cena: 2120 EUR Pjdox Swuispfx Agxopr Neto cena izračunana po tečaju 4,2 PLN/EUR (Pri večjih valutnih nihanjih se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7612 Technical data: - Maximum workpiece width: 1030 mm - Maximum workpiece height: 150 mm – From above: - Metal pressure roller - Split metal pressure roller - Aggregate (profiled rubber calibration roller + pressure shoe + metal roller) - Smooth rubber slip roller – From below: - Infeed roller - Feed belt - Outfeed slip roller - Pneumatic belt oscillation with photocell control - Electrically adjustable table height - 2 feed speeds - Main motor: 11 kW - Brake - Handwheel for precise sanding height adjustment - Feed motor: 0.33 kW - Table lift motor: 0.12 kW - Working pressure: 8 bar - Extraction nozzle diameter: 150 mm - Dimensions (L x W x H): 1500 x 1750 x 2000 mm - Weight: 965 kg Ppodeylbmnopfx Agxjr ADVANTAGES – Made in Germany – Not repainted – Used sander, in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7037 TEHNIČNI PODATKI - Dolžina obdelovanca: 2780mm - Širina obdelovanca: 800mm - Glavni motor: 4kW - Širina brusnega traku: 150mm - Ventilator - Vrtljaji desno/levo - Električna nastavitev mize gor/dol - Premer odsesovalnega priključka: 140mm - Skupne dimenzije (d/š/v): 3760x1440x1520mm - Teža: 502kg PREDNOSTI – Ni ponovno barvano – Z ventilatorjem – Električna nastavitev mize – Rabljeni brusilni stroj, v zelo dobrem stanju Neto cena: 9500 PLN Psdpfx Agex Swvaoxjpr Neto cena: 2260 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se lahko cena spremeni)