Gesamtlänge: 1.660 Mm/ U-Profil 70X30 Mm Podporni Steber U-Profil Povezovalni Steber nakup rabljenega (103.901)

Stanje: zelo dobro (rabljeno), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x CS Sigma profile, used Material finish: Sendzimir galvanized Laedpfx Acjhwduxj Uef Profile length: approx. 1,650 mm CS Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Weight per unit: approx. 7.5 kg Note: The angles shown in the pictures are not included in the offer. General information about the item: This item is only available for collection. Should transport or shipping be required, this will incur additional costs, which can be individually queried with us depending on the delivery location and scope. Overview of our services: (Prices upon request) Assembly and installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems. Delivery with our own fleet (unloading not included)

Stanje: skoraj kot novo (rabljeno), Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank Scope of delivery includes: 01x CS Sigma profile, used Material colour: sendzimir galvanized Profile length: approx. 1,400 mm CS-Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 6.500 kg Note: Laodpfshwdu Hsx Ac Usf The angles shown in the pictures are not included in the offer. General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested individually depending on the delivery location and scope. Overview of our services: (Prices on request) Assembly and installation Our general assembly conditions apply Racking inspection Racking inspections in accordance with DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Samed Innovazioni MM 1 rezač vogalov za trde platnice Proizvedeno v Italiji, Samed Innovazioni Rebord. Zelo dobro ohranjena. Gre za profesionalno, proizvodno napravo za rezanje vogalov na trdih platnicah. Leto izdelave: 2014. Masivna konstrukcija zagotavlja natančnost pri delu. Ledpfx Acjztn Tis Usaf Zamenljivi noži. Nastavljiva globina reza. V kompletu je en set nožev.

Stanje: novo, Leto izdelave: 2026, Stabilen paket varnostnih ograj za dvotirno vozišče (2 x 1.100 mm) Zunanja mera: 2.550 mm, vključno z montažnim materialom 1 x osrednji nosilec 2 x Z-profili 2 x U-varovalo pred trčenjem SIGMA PROFIL kot varnostna ograja Leto izdelave: nova roba Višina: 400 mm Širina: 2.550 mm Barva: rumena Cena: vključno z DDV Za informacije o pošiljanju prosimo, navedite poštno številko. Naše varnostne ograje lahko uporabljate tudi na drugih mestih, na primer na stekleni steni z več gradbenimi elementi, glejte slike 4 in 5. Če želite, nam lahko pošljete povpraševanje. dodatni izdelki, kot so: Laedpfxszux A Ro Ac Ujf Nosilec za pritrditev na tla Spojke Opozorila o obremenitvi Varovala pred trčenjem Varnostne ograje Rešetke Rešetke za zadnjo steno Globoke prečke Ograje za ločevanje in še veliko več... Enostavno nam pošljite povpraševanje! »Izkoristite več kot 20 let izkušenj v panogi – kompetentno in osebno vas bomo svetovali kot vaš izkušeni specializirani trgovec za nove in rabljene regalne sisteme.« Pogoji prodaje in dostave (B2B) - Cene in logistika: Vse cene so navedene neto, ob prevzemu na našem lokaciji. Ekspresna dostava z našim vozilnim parkom je možna po predhodnem dogovoru. - Status ponudbe: Vse ponudbe so zavezujoče do preklica. Izrecno pridržujemo pravico do prodaje medtem. - Lastninska pridržba: Blago ostane naša izključna last do popolnega plačila (prepoved razpolaganja in predelave). - Garancija: Izključna prodaja poslovnim subjektom (§ 14 BGB). Pri rabljeni in IIa robi je izključena odgovornost za materialne napake. Za novo robo veljajo ustrezne garancije proizvajalca.

Stanje: zelo dobro (rabljeno), Robustna naprava, namenjena za izdelavo lukenj v jeklu, aluminiju in drugih kovinah. Zahvaljujoč upravljanju s pedalom zagotavlja udobno in varno upravljanje. Kompaktna zasnova je primerna tako za mehanično delavnico kot za proizvodni obrat. Tehnični podatki: Proizvajalec: Mubea (Muhr und Bender) Model: KL30 Letnik: 1975 Številka stroja: 38601 Država proizvodnje: Nemčija (Zahodna Nemčija) Napetost: 3× 220/380 V Frekvenca: 50 Hz Moč motorja: 1,5 kW Nominalni tok: 5,8 / 3,4 A Stopnja zaščite: IP44 Upravljanje: stopalko Zmogljivost: Ø 30 mm v pločevini debeline 8 mm Ø 20 mm v pločevini debeline 12 mm (Parametri so skladni z identifikacijsko ploščico proizvajalca za material z natezno trdnostjo približno 45 kp/mm².) Stanje: Stroj je bil v uporabi. Ledpfszkmi Dex Ac Ujaf Vizualno stanje je skladno s fotografijami. Robustna in težka industrijska konstrukcija. Idealna za mehanične delavnice, proizvodnjo jeklenih konstrukcij in delavnice, ki se ukvarjajo s predelavo kovin.

Stanje: dober (rabljeno), Vsebina paketa vključuje: 1x globoki okvir, rabljen Barva materiala: pocinkano jeklo (Sendzimir) Skupna dolžina: približno 1.250 mm za globino police: 1.200 mm razdalja med oporniki: približno 1.100 mm podpora za prečke: približno 50 mm kot podpore: L: približno 80 x 80 mm skupna širina: približno 860 mm notranja širina: približno 855 mm debelina materiala: približno 3 mm Bočni okvir: dolžina: približno 1.245 - 1.070 mm spredaj se poševno zožuje širina: približno 200 mm višina: približno 195 mm Končni omejevalnik: širina: približno 200 mm višina: približno 195 mm Vaše kontaktne osebe v našem podjetju: gospod: Andre Evering gospod: Mario Klöver gospod: Falk Deutsch Splošne informacije o izdelku: Izdelek je rabljen, zato so lahko prisotne praske, udrtine in znaki uporabe. Ledsr Dr Suopfx Ac Uoaf Ta izdelek je na voljo samo za osebni prevzem. Dodatni stroški transporta ali pošiljanja tega izdelka bodo zaračunani ločeno. Cene se razlikujejo glede na kraj dostave ali vsebino paketa, zato nas kontaktirajte za podrobne informacije.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Faceplate diameter 400 mm cone 105 mm bolt circle 135 mm Laedpfx Aed Tyu Rsc Usf estimated age

Stanje: dober (rabljeno), Faceplate Laedpfx Acjcx N Ats Usf diameter 500 mm 475 rpm

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Faceplate 24830 Diameter: 500 mm Lasdpod Tyu Eefx Ac Uof Height: 115 mm Taper: 120 mm Estimated age

Stanje: dober (rabljeno), Valjčna veriga, pogonska veriga - Dolžina: 5 m - Valjčna veriga 08B-1 - Enoredna 1/2 x 5/16'' - Količina: na voljo 2 kosa - Z gumijastim profilom - Cena: 45 € na meter - Teža: 6 kg/na 5 m Lsdeb A Ng Rspfx Ac Usaf

Stanje: zelo dobro (rabljeno), Professional BERNARDO BS-1 dividing table / indexing head equipped with a high-quality BISON Ø160 mm lathe chuck. The set is intended for milling machines and precise mechanical machining requiring angular division and indexing of workpieces. Technical data: • Indexing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck rotational speed: 3000 rpm • Precise angular scale • Indexing plate with hand crank • Robust cast iron construction • Capable of highly accurate angular divisions Applications: • Polygonal milling • Gear cutting • Machining shafts and rotary components • Drilling holes at a specified angle • Toolroom and production operations Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck runs smoothly and clamps workpieces securely • Scales and indexing mechanism are legible and fully functional Set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank Laodpfoza Hidsx Ac Usf The exact item shown in the photos is being offered for sale.

Stanje: dober (rabljeno), Lynette Centre height: 330 mm Diameter: 185 mm Base length: 330 mm Base width: 140 mm Total width: 600 mm Ljdpfsd S Algsx Ac Uoaf Total height: 650 mm

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Steady rest Bore diameter: 520 mm Lasdpfx Acofgwi Re Usf Center height with base: 970 mm Center height without base: 650 mm Quill diameter: 100 mm

Stanje: rabljeno, Angle table with 5 T-slots 12 mm T-slot width Lajdjcu Im Depfx Ac Ujf Length: 680 mm Width: 260 mm Height: 265 mm

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Measuring column in matching transport case Lajdpfjfdzvajx Ac Usf Height: 500 mm Diameter: 120 mm Weight: 37 kg

Stanje: zelo dobro (rabljeno), Faceplate Diameter: 450 mm Height: 110 mm Jaw height: 55 mm Long taper mounting: Laodpfxjfhvkvj Ac Uof - Large diameter: 100.5 mm - Small diameter: 85 mm - Taper length: 73 mm External thread for locknut: Thread 130 x 4 Keyway: 16 mm

Stanje: dober (rabljeno), skupna dolžina: 1.000 mm, skupna širina: 600 mm, skupna višina: 2.500 mm, nosilnost na odsek shranjevanja: 150 kg, TEHNIČNI PODATKI • Proizvajalec: META • Višina okvirja: 2.500 mm • Širina podstavka: 1.000 mm • Globina okvirja: 600 mm • Nosilnost enega podstavka: 150 kg • Število podstavkov na modul: 6 kosov • Površina: pocinkana • Montaža s vstavljanjem • Stanje: rabljeno Velike količine so na voljo takoj. Cene glede na količino, neto cena na kos, brez DDV: Osnovni modul: 1 – 5 modulov: 54,00 € 6 – 20 modulov: 52,38 € 21 – 50 modulov: 50,76 € 51 modulov in več: 49,14 € Dodatni moduli: 1 – 10 modulov: 39,00 € 11 – 25 modulov: 37,83 € 26 – 75 modulov: 36,73 € 76 modulov in več: 35,69 € Dobava iz skladišča Nordhorn. VAŠI KONTAKTNI PARTNERJI PRI NAS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT IN MONTAŽA Z veseljem vam pomagamo pri transportu in montaži izdelka. Izdelek je na voljo za osebni prevzem. Dostava je možna proti doplačilu. Dodatni stroški so odvisni od kraja dostave in obsega pošiljke, podrobnosti pa lahko povprašate pri nas. Ledpfx Acsuk E Tho Usaf PLAČILNI POGOJI Plačilni pogoji se določijo ob naročilu. Cena je navedena kot cena na kos/neto cena, kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Podjetje DLK v Nordhornu se ukvarja s prodajo novih in rabljenih izdelkov iz področja skladiščne logistike, transportnih sistemov, skladiščnih regalov, skladišč za tekstil ter strojev za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe za rabljene izdelke različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate kakršna koli vprašanja, nas kontaktirajte. Štiri zmage – gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: rabljeno, skupna dolžina: 1.220 mm, skupna širina: 400 mm, skupna višina: 2.000 mm, nosilnost na odsek shranjevanja: 150 kg, Ponujamo rabljene industrijske regalne sisteme. TEHNIČNI PODATKI Proizvajalec: Nedocn Tip: Shelf N Višina okvirja: 2.000 mm (nova roba) Polica: 1.220 x 400 mm (rablena roba) Nosilnost police: 150 kg Število nivojev: 5 kosov Sistem vtične montaže Diagonalni nosilec Cenik (neto cena za kos, brez DDV): Osnovni moduli: 1 – 5 modulov: 41,50 € neto za kos 6 – 20 modulov: 39,43 € neto za kos 21 – 50 modulov: 37,35 € neto za kos od 51 modulov naprej: 35,28 € neto za kos Dodatni moduli: 1 – 5 modulov: 29,50 € neto za kos Laedpfxjy Dgglo Ac Usf 6 – 20 modulov: 28,03 € neto za kos 21 – 50 modulov: 26,55 € neto za kos od 51 modulov naprej: 25,08 € neto za kos NAČRTOVANJE Naša prodajna ekipa vam z veseljem pripravi brezplačno ponudbo, prilagojeno vašim željam. PREVOZ IN MONTAŽA Z veseljem vam pomagamo pri prevozu in montaži izdelka. PLAČILNI POGOJI Plačilni pogoji se dogovorijo v primeru oddaje naročila. Cena je izražena kot cena za kos/neto cena oziroma kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Podjetje DLK iz Nordhorna trguje z novimi in rabljenimi izdelki na področju skladiščne logistike, transportne tehnike, skladiščnih podestov, skladiščenja tekstila ter stroji za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe rabljenih izdelkov različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate vprašanja, nas kontaktirajte. Štirje dobijo – Gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) Ledsmhhypspfx Ac Ujaf - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Laodpfxomhh Dho Ac Usf - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards Lasdpfxemhh Dzo Ac Uof - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. Lajdpfsmhhx Iox Ac Ujf When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level. Lajdpfx Asmhhyaec Usf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Laodpfx Ajmhh Anoc Uof Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Lajdpfx Ajmhhf Soc Uof The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.