Emag Rs1 - E nakup rabljenega (71.375)

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Zapiralna sila: 280 t Premer polža: 45 mm Utež brizga: 294 g Razdalja med vodili (spredaj): 630 mm Razdalja med vodili (zadaj): 630 mm Prostornina brizga: 323 cm3 Tip: Horizontalna Pogon: Hidravlični Euromap 67 16 vročih kanalov 4 izvleka jeder 2 ventilatorja Lrsdpfx Alexykw Ro Nek

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), številka stroja/vozila: BN320Ausschub, DEMAG KBK - Single-girder telescopic crane - overhead crane runway with approximate dimensions 8m + 1.5m (8m monorail + 1 central 5.5m rail) with approx. 1.5m telescopic extension. Load capacity / lifting capacity: 320 kg Technical specifications of the system: Crane runway made of Demag KBK2 rails The system will be delivered complete: KBK rails, rail connectors, carriages, end plates, brackets/hangers, telescopic frame type B2/2, etc. incl. 320 kg Demag DK chain hoist – lifting height approx. 3m Power supply on the longitudinal side via internal conductor rails (KBKII-R) Crane is dismantled and available immediately Runway rails can be extended to required length Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection only by appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity 125 kg – 1600 kg Lrjdpeu I U Anjfx Al Nok Please send us your non-binding enquiry for a crane runway with your required load capacity and dimensions.

Stanje: delavnici obnovljeno (rabljeno), tie-bar-set (4) completo para DEMAG ET 330 Ljdpfxofwctas Al Nork

Stanje: delavnici obnovljeno (rabljeno), unidad completa de plastificación para DEMAG 2.300 con husillo y camisa de 80 mm Lsdpjfwcttsfx Al Njrk

Stanje: delavnici obnovljeno (rabljeno), Conjunto completo de bomba para Demag ET 330 Ledpfxjfwctpe Al Nsrk

Stanje: rabljeno, prevoženi kilometri: 411 km, moč: 22 kW (29,91 KM), prva registracija: 03/2004, vrsta goriva: dizel, lastna masa: 760 kg, barva: rumena, vrsta prenosa: mehanski, vzmetenje: drugo, obratovalne ure: 411 h, Moč motorja: 22 kW, dizelski motor, letnik 2004, samo 411 delovnih ur. Kompresorsko kladivo, zračni vibracijski betonator, lastna teža: 760 kg, kot novo stanje. ZA NAS JE POMEMBNO STANJE IN OBČUTEK, CENA JE NA DRUGEM MESTU. Za dodatna vprašanja vam je na voljo g. Faller na navedeni številki. //*MOŽNA MENJAVA, ODKUP ALI ZALOŽITEV VAŠEGA VOZILA, TER FINANCIRANJE! Vse informacije brez jamstva. Druge ponudbe najdete na naši spletni strani: Opis in navedeni podatki niso jamstvo in niso zavezujoči. Zavezujoča je samo prodajna pogodba, ki se sklene v avtohiši ob nakupu vozila. Pridržujemo si pravico do napak in vmesne prodaje! Ljdpfx Ajxrpmusl Nork

Stanje: zelo dobro (rabljeno), DEMAG / ABB / TELEMECANIQUE - Frekvenčni pretvorniki / pretvorniki - 11 kosov: 1. DEMAG tip - ACS800 04M-0140-3+D150+E210+H355+H356+H360 z uporovno enoto (nova) - 1 kos. 2. DEMAG tip - ACS800 04M-0210-3+D150+E210+H355+H362+N672 z uporovno enoto (rabljena) - 1 kos. 3. DEMAG tip - UD DPU415V024E10 - 1 kos. 4. TELEMECANIQUE tip - ATV 58ED23N4 - 15 kW (v originalni embalaži). 5. DEMAG tip: ABB - ACS 800 - 2 kosa. 6. DEMAG tip: ABB - ACS 800 - 1 kos. Lodpfx Ajyu S Aljl Nerk 7. VACON / AC DRIVE - 3 kosi. 1. VACON tip: X4K40400C 2. VACON tip: XX4K440075C 3. AC DRIVE tip: X4K40075C1 8. AC DRIVE tip: X4 - 1 kos.

Stanje: zelo dobro (rabljeno), 1. DEMAG menjalniki / žerjavni menjalniki - 10 kosov. Tip: AFM 06 - 1 kos Tip: AFM 05 - 1 kos Tip: AFM 04 - 1 kos (na voljo so 3 kosi). Tip: AFM 04 - 1 kos Tip: ADE 50 DD - 1 kos Tip: Kotni menjalnik AFW 08 - 1 kos Tip: WUK 60 TD - 1 kos Lredpfxsyu Sbue Al Nek Tip: P 208 - 1 kos

Stanje: novo, Radijsko upravljanje / oddajnik s joystickom / oddajnik / sprejemnik: 1. Radijsko upravljanje / oddajnik s joystickom / oddajnik Tip: DRC - JD2 s 4 baterijami (novo). 2. Oddajnik tip: DRC - 10 2ST D3 - 2 kosa (nova). 3. Sprejemnik tip: DRC - MP D3 (nov). 4. Elektronska plošča tip: DRC - DR D3 (nova). 5. Električna omarica s sprejemnikom tip: HBC FSE516 6. Sprejemnik tip: RC - E10 7. Radijsko upravljanje / oddajnik s joystickom / oddajnik - 2 kosa: Tip: FSS760 - 40 Tip: 716 - K 12973 Lrsdpfx Aeyuy S Usl Nek 8. Radijsko upravljanje / oddajnik s joystickom / oddajnik - 2 kosa: Tip: F24 - 60 TK 9. Radijsko upravljanje / oddajnik s joystickom / oddajnik - 2 kosa: Tip: F25 - 6D

Stanje: zelo dobro (rabljeno), Control switch Manufacturer: DEMAG Type: DSE 10 C/CS Documentation available Lsdpof Ezbtofx Al Nork

Leto izdelave: 1972, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TRFA12+14x, 1x Demag friction wheel drive travel drive for wire rope hoist, crane, hoisting unit, P-puller, bridge crane, etc. Stock from years of manufacture 1971 + 1976: 14x RF310 – Motor type 16/6KF8-2 0.15-0.6 kW 5m/25m/min Price €2,850 each 12x RF400 – Motor type 19/11KF12-2/2 0.18-1.1 kW 6.3m/40m/min Price €3,650 each With 2-speed operation Complete with tension clamps, motor/gear unit, and friction wheel We can also refurbish or manufacture new replacement friction wheels for defective or porous units - please inquire. Lrjdpfxet Rtm Nj Al Njk Total weight approx. 100-150 kg, connection 380V 50Hz Used condition Item location: 75053 Gondelsheim See pictures

Stanje: novo, DEMAG upravljalna omarica / razdelilna omarica za dvižno napravo / žično dvigalo - DR / DMR / DH 1. Demag upravljalna omarica DR / DMR s frekvenčnim pretvornikom Lrjdpfoyut Aaex Al Nek DIC - 4 - 007 - C - 0032 - 05 2. Demag upravljalna omarica / razdelilna omarica za DH dvižno napravo

Stanje: rabljeno, Nosilnost: 250 kg Dvig / mm Dovoljena obremenitev: 250 kg Dolžina verige: 2,5 m Teža: ca. 30 kg Ljdpfx Ajykvbqol Njrk

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: FI126/4 / FI128/5, 1 Demag KBK II stenski vrtljivi žerjav, nosilnost / dvižna zmogljivost 250 KG Na voljo 2 kosa!!! Izmet 4 m, nosilnost 250 kg Lsdpfx Aloyl Syfo Nerk Z verižno dvigalko Demag PK, nosilnost 250KG (starejši model) Teža z vključno stensko konzolo cca 200 kg Kompletno z dvižnim mehanizmom, kabelskim vodilom, vozičkom in drobnim materialom Območje vrtenja 270° Lokacija artikla: 75053 Gondelsheim Naprava je popolnoma razstavljena in takoj na voljo Pošiljanje s špediterjem ali osebni prevzem Prosimo, povprašajte za stroške pošiljanja glede na poštno številko

Stanje: novo, Leto izdelave: 2026, Aluminium Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) Lsdpfxeyhzplj Al Nork We offer a robust incline conveyor in aluminium modular construction for reliable handling of piece and bulk materials – ideal for industry, trade, recycling, wood processing, and more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveying routes. _____ Technical Data (Sample Configuration): ✔ Feed height: individually adjustable ✔ Inclined section: selectable lengths ✔ Discharge height: individually adjustable ✔ Substructure incl. adjustable feet & machine feet or with transport rollers → For levelling uneven surfaces / stable placement _____ Design / Frame: ✔ Aluminium modular construction ✔ 2-profile 90x45mm or 3-profile reinforced 135×45mm ✔ Continuous carry plate 2.0 mm galvanized steel or 1.4301 stainless steel _____ Rollers / Drive: ✔ Drive roller & return roller made of S235 steel, welded & machined ✔ Ø100, 150 or 220 mm ✔ Shafts mounted with tension bearings ✔ Drive: Shaft-mounted gear motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Power supply 230/400V, 50Hz, protection class IP54 (standard) ✔ Drive ready for connection up to the motor terminal box ➡️ Commissioning by a qualified electrician required _____ Conveyor Belt / Carriers: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt width: 100,200,300,400,500,600,700,800,900 or even 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with high cross stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: individually adjustable ✔ Pitch individually adjustable _____ Options / Accessories: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as requested _____ ✔ Custom manufacturing to customer specification ✔ Industrial quality “Made in Germany” Dimensions, versions & price on request Just send us a short message – we provide quick and uncomplicated advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customised solutions for the recycling, food, and processing industries. Our diverse product portfolio includes everything from conveyor belt systems, flat conveyors, incline conveyors, and angle conveyors to Z-conveyors. Additionally, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all tailored to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we individually adapt our solutions to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right answer—there’s no such thing as a special order for us! Challenge us! Contact us and discover how we can turn your requirements into tailored solutions. Let’s shape the future of your production processes together!

Leto izdelave: 2026, stanje: novo, Robust steel construction – designed for continuous operation The base structure consists of a heavy-duty construction steel frame, manufactured from laser-cut, bent, and welded components. The surface is finished with high-quality powder coating in RAL0208. Modular Design: Our conveyor belt frames are available in transportable sections. This makes the system: - Easy to transport and assemble - Extensible or retractable at any time - Ideally suited for later modifications or system adjustments Conveying Technology & Troughing Idlers The troughing roller assembly on the return side is designed for smooth and reliable operation: - Shaft Ø: 60/15 mm - Roller station spacing: approx. 500 mm (customisable) - In the loading area, a narrower roller spacing can be provided on request for increased load capacity Drive & Rollers Lsdpoyhznnjfx Al Nerk The drive roller and tail roller are made of S235 steel, welded and precisely machined: - Ø 220 × 700 mm, crowned surface - Shaft secured with tension bearings - Bearing points with heavy-duty UCF flange bearings incl. grease nipples Drive unit: - Gearmotor: Hydromec worm gear, 1.1 kW - Belt speed: approx. 1.15 m/s - Connection: 400V / 50 Hz, protection class IP54 - Drive unit pre-wired up to the motor terminal box (Commissioning must be performed by a qualified electrician) - Motor mounted on the right in conveying direction, in pulling configuration Conveyor Belt A durable, industrial-grade belt is used: - Type: DM EP250/2, 3+1.5 cover - Chevron profile, 17 mm high, 650 mm wide - Splice area without profile - Endless hot vulcanised Custom Options & Accessories (as required) Thanks to its modular construction, all components can be precisely tailored to your process, for example: ✅ Special lengths & widths ✅ Side plates / wavy edges (for lateral guidance and increased conveying stability) ✅ Infeed/receiving plates (wear-optimised, gentle on materials) ✅ Loading/infeed hoppers (for clean bulk feeding) ✅ Discharge plates / chutes ✅ Cleated profiles / alternative belt qualities ✅ Adjustment of roller spacing & idler geometry ✅ Special paint coatings / customer-specific designs

Leto izdelave: 2026, stanje: novo, DM flat conveyor belt type FB-700 without supporting structure for conveying bulk materials Conveyor length: 6,000 mm Belt width: 650 mm Welded and bent structural steel construction, laser-cut Base frame powder-coated in RAL 5015 Modular conveyor frame construction / segments available in transportable lengths. Frame construction can be extended or shortened at any time. Return roller construction (idler rollers) in the lower run, axle Ø60/15 mm Roller station spacing approx. 500 mm (customizable) Narrow roller spacing in the feed area Drive drum and deflection drum made of welded and machined S235 steel Ø220 x 700 mm, crowned and turned, shaft fixed with bearing units. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/s Connection: 400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) Motor mounted on right side in conveying direction, pull configuration. Bearing locations equipped with robust UCF flange bearings incl. grease fittings. Lrjdpfx Alsyhznho Nsk Rubber conveyor belt DM EP250/2 3+1.5 top cover Chevron profile 17 mm high x 650 mm wide Joint area without profile, endless hot-vulcanized

Stanje: novo, Leto izdelave: 2026, Aluminum angled conveyor belt with substructure including leveling and adjustable machine feet for compensating uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Knee angle: 45° Height of the horizontal section: 350 mm Total conveyor length (measured on the floor): 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Reinforced double profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller made of welded and machined S235 steel Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) Lrodpfoyhzhzjx Al Nok PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matt Belt width: 600 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, highly cross-stable At the angled section, the belt is guided on both sides with three hold-down rollers each Belt is supplied with a 70 mm edge-free zone on both sides Due to the wave edges on both sides, the usable belt width is reduced Usable width: 300 mm, calculated as follows: (Top view) Cross configuration 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC V-guide rib on the running surface profile – 10x6 mm - Including widened substructure for head load stability - Including cut-out in the discharge plate - Including slide bearings in the drive and return roller - Including magnet-free zone for overband magnetic separator area - Including bracket for DMPM1200 in the incline section Discover tailor-made solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat belt conveyors, inclined conveyors and angled conveyors, to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnet separators, and dosing bunkers – all tailored to customers’ specific requirements. We understand that each industry and project is unique. That’s why we custom-build our solutions to meet your specific needs and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution – no matter how specialized the requirements! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overband magnet, magnetic belt separators, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnets, filter systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Aluminum angle conveyor with support frame including adjustable feet and machine leveling feet for compensating uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Lrjdpfeyhzhujx Al Nek Total conveyor length (measured on the floor): 5,000 mm Discharge height: 2,000 mm Horizontal height: 500 mm Design features: Aluminum modular construction - Reinforced triple profile 135x45 mm - Fully covered 2.0 mm galvanized steel discharge plate Drive roller + return roller made of S235 steel, welded and machined Ø150x820 mm crowned, shaft fixed with pillow block bearings. Drive: Direct-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive prewired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 15/4 0+007 PVC incl. wave-edge PVC, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, with high transverse stability In the bend, the belt is guided on each side by 3 hold-down rollers. Belt has a 70 mm edge-free zone on both sides. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover customized solutions for your industry! As an innovative mechanical engineering company, we take pride in offering tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveyor systems, flat belt conveyors, incline conveyors, and angle conveyors to Z-shaped conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnets, drum magnets, and dosing bunkers—all designed according to our customers’ specific requirements. We understand that every industry and project is unique. That is why we customize our solutions to your specific wishes and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special orders—for every problem we find the right solution! Put us to the test! Contact us and discover how we can turn your requirements into tailored solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grates, magnetic grids, metal separators, block magnets, filtration systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Aluminium Z-shape conveyor belt with substructure including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor length (measured on the ground): 3,500 mm Height of the horizontal section: 400 mm Design: Aluminum construction design - Double-reinforced profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller S235 steel, welded and machined Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm Lrodpfx Ajyhzhnsl Njk Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a borderless zone of 70 mm on each side. Due to the waved side edges, the usable width of the conveyor belt is reduced: Usable width: 500 mm, comprised as follows: (Top view) Lateral arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC guide strip on running surface profile - 10x6 mm - including cutout in the discharge plate - including slide bushings in the drive and return rollers

Stanje: novo, Leto izdelave: 2026, Aluminum inclined conveyor belt with substructure including adjustable leveling feet and machine feet for compensating unevenness - Infeed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction Ledpfx Aloyhzhbo Njrk - Reinforced triple profile 135x45 mm - Continuous discharge sheet 2.0 mm, galvanized Drive roller + return roller made of S235 steel, welded and machined Ø150x620 mm, crowned and finish-turned, shaft mounted with tension bearings. Drive: Flange-mounted geared motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be performed by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped joint Belt material: 2-ply, exceptionally cross-stable 2 pcs. corrugated edge profiles, 80 mm high, 50 mm wide, edge-flush high-frequency welded 14 pcs. T60 cleats, 400 mm long, spacing approx. 296 mm, centered welded Belt material: 2-ply, exceptionally cross-stable Due to corrugated edges on both sides, the usable belt width is reduced: Usable width 500 mm, determined as follows: (Top view) cross arrangement 50+500+50 mm

Leto izdelave: 1976, stanje: rabljeno, številka stroja/vozila: WR2, Demag Overhead Crane – Kranhimmel Crane Runway – Indoor Bridge Crane Lifting Capacity: 5t / 5000kg, Span: 13,900 mm External dimension with end carriage approx. 14,000 mm Wire Rope Hoist P-Zug P412 M11 – 4-fall with micro-lifting Year of manufacture: 1976, with pendant control Construction height (top edge of crane to hook): approx. 1,000 mm End carriage length with buffer: approx. 3,000 mm Hoist lifting height: 5,500 mm Weight: approx. 3,200 kg Control system overhauled, new contactors etc. installed, cable drag chain added Crane is dismantled and immediately available from location 79664 Wehr. Inspection logbook included. In good used condition Column slewing cranes and wall slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier possible – please inquire with postal code Lsdpfx Alornmzzs Nsrk Collection preferred

Leto izdelave: 1992, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: Div1, Technical data: 1x Demag KBK 1 column-mounted slewing jib crane, rated load 125 kg, with chain hoist Load capacity at full outreach: 125 kg / 0.125 t Height: approx. 3.5 m Lodpeng H T Uefx Al Nerk Underside of jib: approx. 3 m Outreach: approx. 4 m Hook height: approx. 2.55 m Total weight: approx. 450 kg With steel or Demag chain hoist, 125 kg, depending on stock availability Including bolts, cable trolley, travel gear, end cap, etc. Various cranes in stock Slewing range: 300°, connection: 400 V, 16 A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Further cranes available with capacities from 80 kg to 5000 kg – please inquire See pictures Shipping by freight carrier or pickup by appointment only

Leto izdelave: 1972, stanje: rabljeno, številka stroja/vozila: WIT, Technical Data: 1x Vetter / Demag column-mounted slewing crane NL 250KG with Demag chain hoist Rated capacity at full outreach: 250KG / 0.25t Multiple cranes available (7 units) Height: approx. 3.75–4m Outreach: 3 + 3.9m Total weight: approx. 700KG Ljdpfx Aljrwkbuo Nsrk incl. cable festoon system, trolley, etc. Slewing range: 360°, connection: 400V 16A Optional delivery with 250KG chain hoist Crane is dismantled and immediately available Item location: 75053 Gondelsheim More cranes available, load capacities from 80–5000Kg, please inquire See pictures Shipping by freight carrier or collection by appointment only

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, skupna masa: 11.800 kg, skupna dolžina: 16.700 mm, nosilnost: 10.000 kg, delovna višina: 11.350 mm, dvižna višina: 11.350 mm, Oprema: dokumentacija / priročnik, Demag mostovno dvigalo – Tip: dvonosilno – Nosilnost: 2x 5.000 kg – Dvižna višina: 11,35 m – Leto izdelave: 2021 – Tip vitla: vitla z jekleno vrvjo – FEM/ISO vitlo: 2m / M5 – Proizvajalec: Demag / Siempelkamp Dimenzije – Razpon: 16.700 mm (od sredine do sredine) – Skupna dolžina: 17.000 mm – Montažna višina: 1.600 mm – Širina: 3.860 mm – Medosna razdalja: 3.150 mm – Primerno za dizalično tirnico: A55 / 50 x 30 mm – Neto teža: 11.800 kg Hitrosti – Dvig: 8/1,3 m/min – Obračanje vozička: 20/5 m/min – Premik dvigala: 40/10 m/min Značilnosti – Upravljanje: radijsko upravljanje – Priročnik za dvigalo na voljo: da – Električne sheme na voljo: da – Stanje: v zelo dobrem stanju – Demontirano: da, na voljo takoj Lrsdpfxsyvr Huj Al Nsk – Posebnosti: 8,5-tonski Equator s karuselom kot možnost