Elme Težka Oprema nakup rabljenega (15.573)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing Lhodpfemhh Dhox Anfjg - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time Lhsdpfx Anefdkb Tsfog - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Lodomhh Dzspfx Anfohg Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Ledpfx Asmhh Anjnfehg Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) Ljdpfsguk A Hjx Anfohg - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing Lhsdoguk Dkopfx Anfog - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard Lodpfx Aomhh Dtsnfjhg - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting Lhjdpoguk Dvsfx Anfeg - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, temperatura: 250 °C, notranja dolžina: 1.000 mm, notranja širina: 1.000 mm, notranja višina: 1.500 mm, Hello, I am offering here an Eliogtherm Kelvin curing oven / industrial dryer. Comparable to TRO ovens, Reinhardt ovens or those from Nabertherm. With this high-quality dryer, paints, coatings, powder coatings, and screen prints can be dried/cured at temperatures up to 250°C. The oven is also well suited for preheating materials. It is approved for drying solvents. Exhaust air is monitored by pressure switches. The oven is very well insulated, not only on the walls but also on the floor. Fresh air supplied to the oven is filtered through a large filter to prevent dust particles from entering. The internal dimensions of the oven are 1000 mm x 1000 mm, height 1500 mm. Extensive documentation materials such as manuals, wiring diagrams, etc. are available for the oven. The oven is currently located in our warehouse near Cham in the beautiful Bavarian Forest—so a visit would be doubly worthwhile. We are happy to organize shipping by freight forwarder. Loading with a forklift on site is no problem. Ljdpfsy Svqisx Anfjhg If you have any questions, please feel free to contact us.

Stanje: novo, Leto izdelave: 2026, Je kompletný lakovací systém, ktorý pozostáva z nasledovných komponentov: 1) Pec so vzduchovým ohrievačom (typ paliva je možné prispôsobiť požiadavkám zákazníka). Lhedpfsyaqt Tex Anfog 2) Striekacia lakovacia kabína vybavená systémom absorpčnej filtrácie vhodným aj pre náročné lakovacie aplikácie. 3) Dve parkovacie miesta na umiestnenie dielov po lakovaní alebo vytvrdzovaní. 4) Koľajnicový systém umožňujúci jednoduchý presun dielov medzi jednotlivými pracoviskami. 5) Vozík určený na prepravu vyššie uvedených dielov. 6) Plne integrovaná oceľová konštrukcia, staticky robustná, navrhnutá na minimalizáciu rizika poruchy ktoréhokoľvek komponentu. Z hľadiska dizajnu aj technických špecifikácií predstavuje uvedená inštalácia kompletný a autonómny elektrostatický lakovací proces. Pre limitované systémy je v ponuke celý balík za 115 000 euro.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: VD 07.08.469, vrsta vhodnega toka: Enosmerni tok, Prodajamo naš varilni tunel Kallfass. Prikazovalnik je pokvarjen, ostalo deluje popolnoma brezhibno. Za dodatna vprašanja pokličite. Lhedpoy Snw Iefx Anfeg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, obratovalna teža: 28.800 kg, Leto izdelave: 2011, obratovalne ure: 4.150 h, Sandvik QE340 presejalnik na goseničnem podvozju dvostopenjska sita – 3 produkti 4100 ur – PRAVE URE! Leto izdelave: 2011 Površina zgornje mreže: 4800x1420 mm Površina spodnje mreže: 4200x1420 mm Dovajalni transporter 3-smerni izhod Motor CAT 3054C 100 KM Teža: 28,8 ton Uredimo lahko prevoz kamorkoli po svetu Lhedoyua Dqspfx Anfog Stroj v zelo dobrem delovnem stanju, pripravljen za delo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Proizvajalec: MSK Lhodpfx Anjy Ryhpjfsg Letnik izdelave: 2006 Tip: MSK 360 Kapaciteta: približno 100 palet/uro SIEMENS S7

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, ICE TECH Xcel 6 stroj za suho ledom peskanje – ODLIČNO OHRANJEN, letnik 2023 Naprodaj je odlično ohranjen ICE TECH Xcel 6 stroj za suho ledom peskanje, letnik 2023. Stanje: Naprava je bila kupljena leta 2023, vendar ni bila nikoli v uporabi. Brez znakov rabe ali delovnih ur – je kot nova. Originalna embalaža ni več na voljo. Ledpfx Anjy S S Dfsfohg Obsežen komplet dodatne opreme vključen: Različne dodatne šobe za različne namene Zaščitne rokavice Zaščitna očala Takoj pripravljeno za uporabo – vključno z osebno zaščitno opremo Prednosti: Letnik 2023 Nerabljeno / stanje kot novo Komplet dodatkov Idealno za industrijsko čiščenje (proizvodnja, orodjarstvo, živilska industrija, avtomobilska industrija itd.)

Stanje: rabljeno, Leto izdelave: 2018, MAN TGS 26.320 6x2 – 12/2018 – 99,000 km – Euro 6: - First registration: 12/2018 - Engine: 320 HP - Euro 6 - Approximately 99,000 km - Automatic transmission - Three axles, 6x2, wheelbase 4.200 m + 1.350 m - Intelligent third axle (steerable both forward and backward) - Full air suspension - Gross vehicle weight: 25,500 kg - Payload: approx. 13,800 kg Accessories: - Differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, air-suspended driver’s seat, sun visor, cruise control, sunroof, trailer electrical and air connections, engine PTO, rear cab wall with window, radio, battery isolator. Bodywork: - BDF demountable interchangeable system for swap bodies, containers, generators, and other special equipment The vehicle is available for viewing and test drive at: Ledpfx Aey Dvb Senfjhg PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 045-7950955 Please contact us to arrange an appointment in order to best organize access to the company. For further information, technical details, and to find out the sale price of the vehicle, please contact our sales representatives directly at +39 045-7950955. Note: The vehicle description is indicative and may contain errors or inaccuracies. Interested parties are responsible for verifying the exact specifications before purchase. PSL Autocarri Srl disclaims any responsibility for possible errors or inconsistencies contained in this listing. NOTE: WE ONLY REPLY TO INFORMATION REQUESTS CONTAINING THE NAME AND PHONE NUMBER OF THE ENQUIRER.

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Ledpfx Aneh Izr Uofjhg Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: pripravljen za uporabo (rabljen), Profesjonalna wywrotnica do pojemników na mięso. Urządzenie przystosowane jest do zasilania 3 x 400 V, +N/PE, o mocy 0,37 kW. Kompaktowe wymiary sprawiają, że idealnie sprawdzi się w zakładach przetwórstwa spożywczego, szczególnie tam, gdzie kluczowa jest precyzja oraz niezawodność. Ledjwiv Ayspfx Anfohg Wymiary: Szerokość: 140 mm Głębokość: 100 mm Wysokość (wywrotnica opuszczona): 132 mm Wysokość (wywrotnica podniesiona): 210 mm Całkowita wysokość z podniesioną wywrotnicą: 225 mm Solidna konstrukcja oraz sprawdzona technologia duńskiego producenta gwarantują długą żywotność i bezpieczną eksploatację. Urządzenie doskonale nadaje się do pracy z systemami transportu i załadunku w branży mięsnej, rybnej oraz warzywnej.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RM6 NE IIDI, vrsta vhodnega toka: trifazni, vhodna napetost: 11.000 V, vhodna frekvenca: 50 Hz, krmilna napetost: 230 V, Oprema: CE označba, stikalo srednje napetosti ostalo od naročila, novo, neuporabljeno Ledpfx Asy Hir Aonfshg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Stroj, ki ga je obnovil Nodema, primeren za pakiranje izdelkov v snopih. Stroj ima na okvir pritrjen skrčljivi tunel za pakiranje. Lahko zapakira do 17 izdelkov na minuto. Zvarni žig širine 600 mm. Širina folije do 800 mm. Stroj ima pravokotni dovod, idealen za pakiranje na primer pločevink pijač s pladnjem. Lhsdpsy Tuxzsfx Anfeg

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, moč: 1,8 kW (2,45 KM), vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 150 obr/min, Ponujamo ta rabljeni stroj Stephan UMC 12-F, tip naprave za mešanje in gnetenje, letnik 1989. Stroj je delujoč in pripravljen za uporabo. Stroj ima poškodovan mehanizem za regulacijo obratov (frekvenčni pretvornik) in so obrati fiksno nastavljeni na 50 %. Lhedpfx Ajy Ry Ezsnfog Tip stroja: UMC 12-F Številka stroja: 714-27-101 Tip motorja: FD112M10- Številka motorja: 4812222 Nazivna napetost: 380 V Frekvenca: 50 Hz Moč motorja: 1,8 kW Število faz: 3 Obratovalna hitrost: 150-2800 1/min Stopnja zaščite: IP 44 Tok: 4,8 A Leto proizvodnje: 1989 Za vprašanja ali dodatne informacije nas kontaktirajte po telefonu ali elektronski pošti.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, pritisk: 8 letvica, temperatura: 20 °C, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 1.250 kg, uporabna prostornina rezervoarja: 90 l, največja hitrost vrtenja: 758 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, We are offering this used RESPECTA DB13A/20-30L mixing and stirring plant, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: Used Machine type: Mixing and stirring plant Weight: 1250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in fully functional condition. The machine can also be purchased together with other machines as a complete production line. Technical data – Mixing unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler grain size: 2 mm Mixing output: approx. 20–30 L/min Mixing tool: Single-flight, left-handed mixing screw with wear-resistant coating; cylinder heavy-duty construction with high surface hardness Drive: Three-phase motor 4 kW – 379 rpm, 400 V / 50 Hz Speed range: adjustable from 0 to 758 rpm Screw overload protection: set to 80% of the rated current Output adjustment: Potentiometer, infinitely adjustable without altering the formulation Technical data – Binder premixer: Dynamic mixing of pure liquids without solid content. Mixing output: max. 5 L/min Mixing tool: Single-flight, left-handed mixing screw System materials: Stainless steel, Viton, PTFE Drive: Three-phase motor 0.55 kW, 2830 rpm, 230–400 V / 50 Hz Pressure monitoring: Pressure transmitter S-11, 0–4 bar G ½“ Pressure display: Operator terminal at the control cabinet Technical data – Filler dosing: Four filler dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release fasteners. All dosing units are equipped with level sensors. For processing fine fillers, a horizontal agitator is integrated in dosing unit 2 to largely prevent filler bridging. Fillers with maximum grain size of 2 mm Dosing capacity: approx. 2–10 L/min Dosing tool: Single-flight, left-handed spiral Dosing drive: Gear motor 0.75 kW – 91 rpm, 230–400 V / 50 Hz Speed control: Frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Output adjustment & display: Operator terminal at the control cabinet Hoppers Capacity: approx. 90 L (each, 4x) Technical data – Resin dosing: Pump unit for volumetric metering of pure liquids, free from solid matter and reactive agents. Dosing output: approx. 400–2000 ml/min Lsdpfx Ansyxg Dgefehg Viscosity at 20°C: approx. 2000 mPas Pump type: Gear pump Pump pressure: max. permissible 8 bar Drive: Three-phase gear motor 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: Frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Output adjustment & display: Operator terminal at the control cabinet Dismantling and collection at buyer's own responsibility. Pick-up location: A-8265 Kroisbach an der Feistritz (Austria) If you have any questions or need more information, please feel free to send us a message or call us.

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: 1800603, skupna dolžina: 2.485 mm, skupna višina: 1.715 mm, skupna širina: 1.245 mm, višina izdelka (maks.): 240 mm, največja dolžina izdelka: 600 mm, največja širina izdelka: 400 mm, vhodna napetost: 230 V, vhodni tok: 13 A, delovna višina: 870 mm, širina varilnega noža: 600 mm, dolžina varilnega noža: 400 mm, prehodna višina: 240 mm, skupna masa: 763 kg, širina prehoda: 400 mm, moč: 3 kW (4,08 KM), širina folije: 700 mm, vhodna frekvenca: 50 Hz, nazivna moč: 3 kW (4,08 KM), leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, Minipack-Torre Pratika 56 MPE — Fully Automatic L-Bar Sealer. Year of manufacture 2018, Serial No. 1800603. Direct from end user, not from a dealer. Fully automatic L-bar shrink and film wrapping machine. Schneider-Electric Magelis touchscreen with 256 programmable recipes (format, temperature, speed per program). Lhsdjy Stuxepfx Anfsg TECHNICAL DATA - Throughput: up to 3,600 pcs/h - Usable sealing bar 600 × 400 mm, packing height 0–240 mm - Film: Polyolefin/PVC/OPP 7–80 µ; film roll up to Ø 300 × 700 mm - 230 V single phase, 3 kW — no three-phase, no compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm, weight 763 kg - Schneider brushless servo drive, PLC control, emergency stop, safety exclusion key switch CONDITION Cosmetically in very good condition, serviced by authorized service partner — complete service history documented. Lifetime counter: 36,415 packs — moderate usage. In May 2025 replaced: sealing wire, upper and lower rubber parts, Teflon tape. KNOWN REPAIR REQUIREMENTS (transparent) One conveyor belt (infeed/outfeed belt, part no. 400201) is worn. Repair quote from authorized service partner available: material €357.59 + labor €522 = €879.59 net. Replacement can also be done by customer. Repair quote PDF available on request. SCOPE OF DELIVERY Machine fully operational (safety glass hood, Magelis touchscreen, all safety functions), power cable, film roll (remainder), mobile on 4 swivel castors. Original documentation (data sheet, order confirmation, maintenance correspondence available on request). LOCATION & HANDOVER 18239 Satow (Mecklenburg-Western Pomerania). Self-collection preferred — free inspection and functional demonstration by appointment. Transport can be arranged at extra cost (special pallet + crating required due to 763 kg weight). CONDITIONS - Asking price €14,500 net (plus VAT) - Commercial sale: Marko Strehk Sole Proprietorship - Sale “as seen” with exclusion of any liability for material defects in accordance with §§ 437 ff. BGB; disclosed defects are listed above transparently - Buyer can inspect and test the machine beforehand — complaints after handover are excluded - For intra-community supply to buyers with EU VAT ID: delivery exempt from VAT If interested, please inquire with a brief description of your intended application — response within 24 h.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 170467, Danes vse opravljamo s tiskalniki in izdelovalca plošč ne potrebujemo več. Lhsdpfsy Tkh Esx Anfog

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, Essentially consisting of: feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening unit, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet integrated in container, storage silo, dust suppression system. Lodsq Tcmvjpfx Anfjhg

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Kakovosten Herma H400, dobavljen s strani Nodema prvemu kupcu in zamenjan z novo napravo za etiketiranje. V dobrem delujočem stanju. Lhodpoy Ti U Rsfx Anfog