Dmg Dmg Hmc Plates nakup rabljenega (11.391)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 15.208 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 880 mm, skupna masa: 12.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 21.000 W, število osi: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and travel distances of 730 mm in the X and Y axes, with a Z-axis travel of 880 mm. The machine is equipped with a robust 500 x 500 mm pallet size and a tool capacity of 40 tools. If you are looking for high-quality machining capabilities, you should consider the DMG MORI NHX 5000 horizontal machining center that we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool holder: BT40 • Tool capacity: 40 tools (optional magazine for 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B-axis: direct drive, indexing 0.001°, max. speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measurement system; linear scale standard • Control: CELOS Siemens 840D sl with 21.5" ERGOline multitouch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw measuring probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling • Application tuning cycle (ATC) Hfjdpfx Aleyt Hwzefsg • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Circuit protection: 125 A • Short-circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating hours: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll flow monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Hfjdpfx Aeywtwwslfog Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: rabljeno, Leto izdelave: 2017, Technical Details: X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm Control: Celos Siemens 840D SL Operate ERGOline Multitouch Spindle speed: 20 – 20,000 rpm Spindle motor: 25/35 kW Spindle torque: 86 / 130 Nm Tool holder: HSK-A63 Tool magazine capacity: 60 positions Max. tool diameter: 70 mm Max. tool diameter with adjacent slots free: 170 mm Max. tool length: 450 mm Max. tool weight: 12 kg Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Table load capacity: 400 kg Rapid traverse (X/Y/Z): 60 m/min Feed rates (X/Y/Z): 60 m/min Internal coolant supply: 70 bar Machine weight approx.: 8.5 t Overall dimensions: 3200 x 4800 x 2900 mm Equipment: Hfodpfxoyqybbj Alfog Rotoclear view window 4-color signal lamp Electronic handwheel Tool breakage and tool length measurement Coolant shower Renishaw spindle probe preparation (preparation only) HSK taper cleaning station with brushes Horizontal machining center with Siemens-Celos control, 4th axis rotary table, magazine for 123 HSK-A63 tools, and 40 bar internal coolant supply. The machine has just received a new spindle.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 43.558 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07400003691, premer struženja: 120 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 118 mm, model krmilnika: SIEMENS SINUMERIK 840 D POWERLINE, razdalja med vreteni: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within one of the following timeframes: between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Spindle distance: 900 mm X1-axis travel: 290 mm Z1-axis travel: 650 mm X2-axis travel: 180 mm Z2-axis travel: 650 mm Y1-axis travel: ±40 mm Z3-axis travel: 670 mm X3-axis travel: 175 mm Rapid traverse speed X/Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All turret positions are powered MACHINE DETAILS CNC control: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h Hedpfoym A S Iex Alfofg EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - Guideways and drives show age-related wear - The X2-axis (guide rails) runs slightly misaligned by approx. 0.03 mm (re-measurement required) - Setting axis reference values in the controller does not work - After hydraulic pump failure, a replacement pump was installed and is now operating as a separate unit outside the machine External reference: Bilstein – Lot 2

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 39.361 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07510001241, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 12.000 obr/min, teža obdelovanca (maks.): 150 kg, model krmilnika: SIEMENS SINUMERIK 840 D, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse speed, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse speed, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse speed, Slide 3 (Z): 36 m/min Tool interface: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and needs to be repaired - The Q2 axis (milling spindle tool changer) malfunctions frequently - The X2 axis (guide rails) is slightly misaligned Hodpfxsym A D Rj Alfsfg - Guides and drives are worn consistent with age External Reference: Bilstein- Lot 1

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 29.532 h, največja hitrost vretena: 10.000 obr/min, skupna masa: 27.750 kg, potovalna razdalja osi X: 2.600 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 900 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, obremenitev mize: 4.000 kg, število osi: 5, Ta 5-osna DMG MORI DMF 260-11 Linear je bila izdelana leta 2017. Opremljena je z veliko mizo (3200 mm x 1100 mm), visoko nosilnostjo (4000 kg) in velikimi hodi osi (X: 2600 mm, Y: 1100 mm, Z: 900 mm). S hitrostjo vretena do 10.000 min⁻¹ in magazinom za 60 orodij je idealna za zahtevne obdelovalne naloge. Če iščete visokokakovostne rezkalne stroje, priporočamo DMG MORI DMF 260-11 Linear, ki jo ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Dimenzije mize: 3200 mm (D) x 1100 mm (Š) • C-os 360° • Največja nosilnost: miza 4000 kg / delilnik 1200 kg • Kapaciteta magazina za orodja: 60 mest Dodatna oprema • Sistemi za merjenje orodij: mehanski in laserski (BLUM) Tehnična specifikacija Stožčavost ISO 50 Hedsyr Sc Hepfx Alfjfg

Stanje: dober (rabljeno), Leto izdelave: 2017, 4 osi Pomik: X = 730 mm, Y = 730 mm, Z = 880 mm Hjdpfxeyn Drxe Alfofg Nosilec orodja: HSK-A63 Paletni menjalec / shuttle miza Število orodnih postaj: 40

Leto izdelave: 1999, stanje: rabljeno, CNC-Steuerung Heidenhain TNC 426 Kühleinrichtung Spänewanne Technische Daten: X-Weg: 600 mm Y-Weg: 525 mm Z-Weg: 500 mm Spindeldrehzahl: 6.300 U/min Werkzeugaufnahme: SK40 Vorschubbereich X/Y/Z: 10.000 mm/min Hodpfxodk Rwno Alfofg Universaltisch, Spannfläche: 750 x 530 mm Maschinengewicht ca.: 6.500 kg ENGLISH TRANSLATION FOR EXPORT PLATFORMS: CNC control Heidenhain TNC 426 Coolant system Chip conveyor/tray Technical details: X travel: 600 mm Y travel: 525 mm Z travel: 500 mm Spindle speed: 6,300 rpm Spindle taper: SK40 Feed rate X/Y/Z: 10,000 mm/min Universal table, clamping area: 750 x 530 mm Machine weight approx.: 6,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.770 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257181158, stružna dolžina: 705 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, premer nihanja nad prečnim premičnikom: 742 mm, premer nihanja nad prečno desko: 920 mm, Attention – Images of milling accessories belonging to other machines were mistakenly included in this auction listing; these have now been removed. Please refer to the updated delivery scope as shown in the current images—approximately half of the accessories previously displayed are included with this machine. TECHNICAL DETAILS Working Area Swing diameter over bed, max.: 920 mm Swing diameter over cross-slide, max.: 742 mm Turning length, max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Hjdpfjy A Nf Isx Alfsfg Front bearing diameter: 140 mm Sub Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank section: 25 mm Max. speed for driven tools: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation footprint: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Sub spindle Main spindle with 10" chuck Sub spindle with 6" chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar feeder

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 560 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 620 (3D), največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 13.000 W, število osi: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travel distances of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 CNC control. If you are seeking high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining center that we have available for sale. Please contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and in production; inspection possible (operation, geometry, overall condition) • Table size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) • Spindle: • Tool clamping: DIN 69872 • Tool magazine: Chain magazine with 30 positions and double gripper • Cooling/media: Coolant-air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z axes; air purge for measuring system • Additional machine options: • Safety voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options - HEIDENHAIN: • Option 3 (#21): M120 Tool radius compensation during contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 manual pulse generator positioning during program run Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l Hsdpfxsylkl Tj Alfjfg • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probe system package: Wireless workpiece touch probe and probe calibration ring • Manual pulse generator (portable control panel) Technical Specification Taper size SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 540 mm, pomik osi Y: 500 mm, pomik po osi Z: 700 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features Celos with Siemens 840D sl Operate control, an integrated Ytterbium cw fiber laser, and a compact design occupying just 4 m² of floor space. Ideally suited for machining diamond tools up to Ø 355 mm and 420 mm in length. If you are looking for high-quality laser processing capabilities, consider the DMG Mori Seiki LaserTec 50 machine that we are offering for sale. Contact us for further information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline control with multitouch display • Processes: Laser fine cutting, laser drilling, laser welding Hfjdoyfv Tvjpfx Alfog • Working capacity: Machining of diamond tools up to Ø 355 mm and 420 mm in length • Axes/Table: NC rotary/swivel table; 5-axis machining; highly dynamic torque motors in B- and C-axis • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated Ytterbium CW fiber laser; 450 W QCW Ytterbium fiber laser, 4,500 W pulse peak power, 450 W average power • Processing head: 80 mm focal length; collision switch • Image processing: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/Usage: ~100 operating hours (as-new condition) • Features: CNC precision laser machine for high-speed machining; highly dynamic and precise Additional equipment • Fanuc robot automation • Automatic Keller extraction system • Keller dust extraction unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, število osi: 3, Ta 3-osni DMG MORI CMX 600 V je bila izdelana leta 2017 in je opremljena s pripravo za 4-osno vrtljivo mizo, krmiljenjem Siemens 840D ter vretenom SK40. Vključuje napredne merilne sisteme za obdelovanec in orodje, ki zagotavljajo natančnost. Idealna je za vse, ki želijo razširiti svoje zmogljivosti obdelave z zanesljivo opremo. Za več informacij o tem stroju nas kontaktirajte. Hjdpfsx D Di Uox Alfefg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D Powerline, število osi: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It is equipped with a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a sub-spindle. The machine was completely overhauled by Eichten Werkzeugmaschinen GmbH and is therefore in excellent condition. If you are looking for a high-quality turning-milling machine, you should consider the DMG CTX 420 Linear V6 that we are offering for sale. Please contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Sub-spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation for bar feeder Machine advantages Technical advantages • In the event of a sale, several tool holders including driven tools would also be sold. Additional information Before commissioning in December 2023, the machine was completely disassembled, cleaned, checked for full functionality, and overhauled by Eichten Werkzeugmaschinen GmbH. It is therefore in technically perfect condition. Hfjdox D R Hgopfx Alfsg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 7.186 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: ITNC530, največja hitrost vretena: 12.000 obr/min, število osi: 5, Ta 5-osna DMG MORI DMU 60 MonoBlock je bila izdelana leta 2010. Opremljena je z avtomatskim menjalcem orodij za 60 orodij, največjo hitrostjo vretena 12.000 min⁻¹ in držalom za orodje SK40. Druge lastnosti vključujejo merilno sondo Heidenhain TS649, 3D quickSET in hlajenje skozi vreteno pri 40 bar. Idealna za kompleksne in natančne obdelovalne naloge. Za več informacij o tem stroju nas kontaktirajte na Islandiji. • Hlajenje skozi vreteno: 40 bar • Razpršilna pištola • Elektronski ročni kolešček • BA4 način delovanja Dodatna oprema: Hsdpfsx D Iirsx Alfofg • Merilna sonda Heidenhain TS649 • 3D quickSET (kalibracijski/preverjalni sistem) Tehnične specifikacije Stožec SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 22.729 h, potovalna razdalja osi X: 635 mm, pomik osi Y: 510 mm, pomik po osi Z: 460 mm, skupna višina: 2.650 mm, obremenitev mize: 600 kg, skupna masa: 5.500 kg, največja hitrost vretena: 10.000 obr/min, število osi: 3, Ta 3-osni vertikalni obdelovalni center DMG DECKEL MAHO DMC 635V je bil izdelan leta 2007. Opremljen je z merilno sondo in 3D sondo, zato je idealen za natančna obdelovalna opravila. Če iščete visokokakovostne rezkalne stroje, razmislite o stroju DMG DECKEL MAHO DMC 635V, ki ga ponujamo v prodajo. Za več informacij o tej strojni opremi nas kontaktirajte. • Orodni magazin: 20 postaj • Velikost mize: pribl. 790 × 560 mm Dodatna oprema • 3D sonda Hfjdpfx Alsx D Epcofeg • Hladilna tekočina: samo zunanji dovod (brez vretenske/oz. notranje dovodne hladilne tekočine) • Transporter ostružkov: ni priložen Dimenzije Globina stroja: 2050 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 17.450 h, potovalna razdalja osi X: 835 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D with ShopMill, širina mize: 560 mm, dolžina mize: 1.000 mm, obremenitev mize: 800 kg, skupna masa: 4.200 kg, število osi: 4, Ta 4-osni DMG DECKEL MAHO DMC 835V je bil izdelan leta 2006. Ta rabljeni stroj je idealen za vertikalno precizno obdelavo in kljub svoji starosti nudi robustno funkcionalnost. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra DMG DECKEL MAHO DMC 835V. Za več informacij nas kontaktirajte. Dodatna oprema • Linearni enkodirni merilni sistem • A-os • Elektronski ročni kolo • Notranje hlajenje – 25 bar / 30 l/min • Kabinska streha • Nova ležišča vretena Prednosti stroja Tehnične prednosti stroja • Priključki za orodje: SK 40 Hsdpjyrd Hwefx Alfefg Dodatne informacije Stroj je še vedno priklopljen na elektriko Dimenzije Globina stroja 2100 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 18.071 h, skupna masa: 6.000 kg, število osi: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. The machine is ideal for precise vertical turning operations and stands out for its robust construction and reliability. If you are looking for high-quality turning solutions, you should consider the DMG MORI Gildemeister CTV 250 2nd that we have for sale. Please contact us for more information. Additional Equipment • Shopturn option Machine Benefits Technical advantages of the machine: • Available from • Weight: 6000 kg • 40 kVA • 58 A max. current • 63 A • 400 V • 50 Hz • Control: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holders • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal tower • Air blast through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel mm Hfedpfx Aljx D Nl Isfog • Linear guide system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guide rails • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High pressure pump flow rate: 20 bar / 40 l/min • Coolant supply through turret disk to all turret stations • Band filter system filtration: 40 µm • Coolant level monitoring • Integrated work area extraction max. 400 m³/h • Renishaw LP2DD workpiece probe • Probes installed at loading and unloading stations • Stylus with pneumatically actuated flap and electronic control • Measuring accuracy: 10 µm • Functional plate for additional tools • Machine cabinet temperature regulation max. 40°C • Control cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnostics support via Internet • Work area rinsing with 3 flushing nozzles • Two separately switchable valves at 8 bar • Workpiece exit conveyor for SRA 160 transport system • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm, max. 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm, max. 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor with transport prisms • Drag chain motion controlled via NC axis • Set of drag frames • Workpiece diameter min. 30 mm/max. 160 mm • Light barrier for workpiece transport system intake station • Hold-down for SRA 160 pallet loading • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face plate chuck • Buffer tray on functional plate • Air blast cleaning for the inner workpiece area • Measuring probe with air blast with two nozzles front and rear • Clamping pressure adjustment with motor-driven valves • Clamping pressure programmable via NC program • Extension of chip chute at chip conveyor by 300 mm • Aluminum machining package • Modified sludge pump at chip conveyor • Forced indexing of band filter • Larger chip container • Extension of insertion screens on chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 20.325 h, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC430, skupna višina: 3.200 mm, širina mize: 1.250 mm, dolžina mize: 1.000 mm, obremenitev mize: 2.000 kg, skupna masa: 18.000 kg, največja hitrost vretena: 8.000 obr/min, število mest v zalogovniku orodij: 120, največja dolžina izdelka: 6.000 mm, število osi: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control unit, an SK50 spindle taper, and a 120-position tool magazine. With a total of 22,180 spindle hours, this is an excellent opportunity to purchase the universal machining center DMG DMU 125 P hi-dyn. Please contact us for further information about this machine. • Spindle hours: 22,180 • Tool magazine/positions: 120 • Travel paths: 1250 x 880 x 800 mm • Tool holder: SK50 • Tool changer: 120 positions in chain magazine • Gripper type: Double gripper Hjdpox Sz Dhefx Alfjfg • Control: Heidenhain TNC 430 • Working area: X-axis: 1250 mm, Y-axis: 880 mm, Z-axis: 800 mm • Dimensions: approx. 6 x 8 x 3.20 m (H) • Weight: approx. 18,000 kg B-axis is indexed Additional features: • Full enclosure • Through-spindle coolant supply • Air blast through spindle retrofitted • Chip conveyor • 600-litre coolant tank • NC rotary table D1250 x 1000 mm • Maximum table load (center): 2,000 kg • Clamping grid: 9 T-slots 18H7 at 100 mm spacing • Motor package with SK50 gearbox — spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared probe • Electronic handwheel • 4 operating modes available • Rinsing gun with pump Technical Specification Taper size: SK 50 Through-spindle coolant: Yes Dimensions Machine depth: 8000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 40.396 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D powerline, Ta DMG Gildemeister CTX410 je bila izdelana leta 2006. Opremljena je z maksimalnim številom vrtljajev vretena 5.000 vrt/min, revolverskim držalom z 12 pozicijami ter pogonskimi orodji na 3 pozicijah. Premer prehodne izvrtine je 65 mm. Razmislite o nakupu tega horizontalnega stružnega stroja DMG Gildemeister CTX410. Za dodatne informacije nas kontaktirajte. • Revolverski nosilec orodij: 12 pozicij • Pogonska orodja: 3 pozicije • Tip držala orodja: VDI 40 • Prehodna izvrtina: 65 mm Hjdpsx U S Enjfx Alfjfg • Dobavni rok po dogovoru

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, moč vretenovega motorja: 11.000 W, skupna višina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 2.900 mm, število osi: 3, This 3-axis DMG Mori Seiki NLX1500MC/500 horizontal turning center was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret equipped with 12 driven stations, this DMG Mori Seiki NLX1500MC/500 offers an excellent purchasing opportunity. Contact us for further details. • Operating hours: 11,996 • CNC control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Programmable tailstock (B-axis), travel 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status beacon Hfedpfoyg Icljx Alfog • Air-conditioned electrical cabinet • Condition/Availability: Machine in excellent condition; outstanding appearance; very good; videos available; immediately available Additional equipment • Chip conveyor • Bar loader interface • Bar feeder magazine: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm • Hex collet: 14 mm • Tool-setting probe arm • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 635 mm, pomik osi Y: 510 mm, pomik po osi Z: 460 mm, skupna višina: 2.670 mm, skupna širina: 3.288 mm, največja hitrost vretena: 14.000 obr/min, moč vretenovega motorja: 15.000 W, največja dolžina izdelka: 2.275 mm, število osi: 3, This 3-axis DMG DMC 635 V vertical machining centre was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful spindle with a rating of 18.5 kW. The machine has a work area with a table size of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking for high-quality machining capabilities, consider the DMG DMC 635 V we are offering for sale. Contact us for further details. • Distance from table surface to spindle nose: 720 mm • Working area • Number of pallets: 1 • Table dimensions: 560 × 790 mm • Maximum workpiece weight: 600 kg • Spindle • Maximum torque: 100 / 74 Nm • Tool magazine Hedpsykaawjfx Alfsfg • Tool holder: SK40 • Tool magazine positions: 20 • Free adjacent tool pockets: 130 mm • Adjacent pockets occupied: 80 mm • Maximum tool length: 300 mm • Tool change time: 1.6 s • Chip-to-chip tool change time: 6 s • Equipment / Features • Electronic handwheel • Air flow through spindle activated via M-function • Operating hours • Power on: 34,484 h • Spindle running: 25,110 h • Rated power: 35 kVA Technical Specification Taper Size SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 38.452 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, največja hitrost vretena: 24.000 obr/min, Ta 3-osni DMG MILLTAP 700 je bila izdelana leta 2016. Opremljena je z glavnim vretenom s 24.000 obrati/min, hitrimi pomiki 60 m/min in sistemom za hitro menjavo orodij. Z Siemens 840D krmilnikom in Renishaw 3D merilno sondo zagotavlja natančnost in učinkovitost. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra DMG MILLTAP 700. Za dodatne informacije o stroju nas kontaktirajte. Dodatne informacije: • Hitro menjavanje orodij • Prepoznavanje zloma orodja • 25 orodnih pozicij • Renishaw 3D merilna sonda • AFS-odsesovalni sistem • Visok tlak • Trakasti filtrirni sistem • Hitri pomik: 60 m/min Hfjdpfox D Nkkjx Alfog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 24.186 h, proizvajalec krmilnikov: HEIDENHAIN, število osi: 5, Ta 5-osni DMG DMU 100 T je bil izdelan leta 2002. Opremljen je s krmilnikom Heidenhain in stožcem SK40. Upoštevajte, da je pnevmatski valj na enem izmed dveh menjalcev orodij okvarjen in ga je treba zamenjati. Razmislite o priložnosti za nakup tega vertikalnega obdelovalnega centra DMG DMU 100 T. Za več informacij o stroju nas kontaktirajte. Tehnične specifikacije Velikost stožca: SK 40 Hsdpfxsx Sz Due Alfsfg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 9.339 h, potovalna razdalja osi X: 120 mm, pomik osi Y: 120 mm, pomik po osi Z: 200 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumeric 840D, skupna višina: 2.253 mm, obremenitev mize: 10 kg, skupna masa: 1.800 kg, največja hitrost vretena: 40.000 obr/min, število osi: 5, This 5-axis DMG ULTRASONIC 10 was manufactured in 2011. It features a Siemens Sinumeric 840D control, a spindle with a maximum speed of 40,000 rpm, and a tool magazine with 60 slots. The machine offers a compact footprint and includes options such as a DMG PP-400 infrared probe and RS NC-4 tool measurement system. If you are looking for advanced milling capabilities, you should consider the DMG ULTRASONIC 10 machine that we are offering for sale. Contact us for further information about this machine. Additional Equipment • Workpiece measurement: DMG PP-400 infrared probe Hfjdpfx Aex D Naxolfjg • Tool measurement: RS NC-4 • Coolant treatment equipment: KM 10 Machine Advantages Technical Machine Advantages • Footprint: less than 2 m² • Space required (LxWxH): 4100x3700x2300 mm • Machine operating hours: 2773 hours • A-axis: -10° to 120° • C-axis: 360° • Feed rate range: up to 10,000 mm/min • Repeatability in x / y / z: p8 μm Additional Information Workpiece NC table with clamping surface: ø 190 mm Max. rotational speed of rotary axes (A / C): 100 rpm / 150 rpm Positioning accuracy (A / C-axis): ±5 Tools: Tool magazine: 60 places, chain magazine Chip-to-chip change time: 15 seconds Media: Required compressed air: 6 bar Average air consumption: 20 m³/hour Operating voltage: 400V (N / PE) / 50A Dimensions Machine depth: 775 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 630 mm, pomik osi Y: 800 mm, pomik po osi Z: 850 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 D, širina mize: 500 mm, dolžina mize: 500 mm, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 20.000 W, število mest v zalogovniku orodij: 303, število osi: 4, This DMG DMC 60H Linear horizontal machining centre was manufactured in 2013 and has 46,048 operating hours. It is equipped with a Siemens 840 D control system and features 4 axes. The machine offers a spindle speed of 18,000 rpm. Please refer to the original delivery note (PDF attached) for full technical specifications. Additional Equipment • Hinged belt chip conveyor with 980-litre coolant system, paper band filter, discharge height 950 mm, width 380 mm, through-spindle coolant supply (IKZ) at 80 bar / 14 l/min (through spindle), continuously programmable pressure, selectable via NC program, work area roof flushing at 180 l/min through nozzles with ripple valve • Rotating viewing window / work area door Hjdpfx Aljyi Ekfofefg • Rinse gun with pump • Double gripper • Wheel-type tool magazine • NC rotary table Ø 630 mm • 3D path control Machine Advantages Qualitative Machine Advantages • MCIS TDI tool management (TDI machine module) – overview, tool management, planning • Mechanical and electrical pre-installation for oil mist extraction • Tool breakage monitoring – mechanical design Technical Machine Advantages • Number of pallets: 12 // round pallet stock: RS 12 • Rotary pallet changer // worktable with pallet support // maximum load: 600 kg // 2 pallets 500 x 500 mm with T-slots // pallet management // pallet changer enclosure // claw flushing pallet • Through-spindle cooling: 80 bar • Tool magazine: wheel-type (5 wheels) with 303 magazine places, HSK A63 • Infrared measuring probe Renishaw PP60 optical (OMP60) HSK-A 63 • MPC machine protection controller (machine protection via quick shutdown) • Laminated safety glass window for right cabin door Additional Information Documentation and electrical diagrams (in German) available.