Daewoo (Doosan) Daewoo (Doosan) Puma 300 Lb Z Nakladalnikom Iemca Automata nakup rabljenega (66.401)

Stanje: rabljeno, moč: 49 kW (66,62 KM), vrsta goriva: dizel, barva: rumena, obratovalna teža: 8.500 kg, Leto izdelave: 1987, obratovalne ure: 11.000 h, Oprema: kabina, ABG Puma 169 A kombinirani valjar Leto izdelave: 1987 11.000 delovnih ur 8.500 kg Zgibni Nwodjyz Twfopfx Anzok Motor Deutz F3-6L 912, 49 kW, 4 valji

Stanje: rabljeno, prevoženi kilometri: 86.000 km, moč: 77 kW (104,69 KM), prva registracija: 08/2022, vrsta goriva: dizel, skupna masa: 3.000 kg, naslednji pregled (TÜV): 10/2026, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 5.339 mm, skupna širina: 2.032 mm, skupna višina: 2.061 mm, dolžina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 1.370 mm, Leto izdelave: 2022, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Ford Transit Custom 300 L2H1, podaljšana različica, z bogato opremo, primerna za podjetnike in obrtnike. Ogrevana prednja stekla Klimatska naprava s filtrom za cvetni prah Dodatno električno ogrevanje 3,0 t največja dovoljena masa 3 sedeži (dvojna sedežna klop za sopotnika) Udoben voznikov sedež z raztegljivo naslonjalo za roko, več možnosti nastavitve: - višina sedeža, nagib sedeža, naslonjalo za hrbet, opora za ledveno področje Visoka ločilna stena med kabino in tovorom, oblazinjena, z odklopno loputo Avdio sistem 21 s Ford SYNC 3, barvni zaslon na dotik 8'' - AppLink (Android Auto in Apple Carplay) - Mediji: radio (DAB+ FM), USB (2x), Bluetooth - Prostoročna telefonija z Bluetoothom - Glasovno upravljanje Multifunkcijski volan, oblazinjen z usnj Sistemi za pomoč pri vožnji: - PDC Parkpilotni sistem spredaj in zadaj, optični in zvočni prikaz - Kamera za vzvratno vožnjo - Tempomat - Sistem za ohranjanje voznega pasu - Sistem za opozarjanje na utrujenost - Sistem za pomoč pri bočnem vetru - Sistem za pomoč pri speljevanju v klanec - Sistem za pomoč pri zaviranju / sistem za samodejno zaviranje v sili - Samodejni brisalniki (senzor za dež) - Samodejni žarometi (senzor za svetlobo) - Samodejno vklop luči za dolge luči - ABS, ASR, ESP - EDS Elektronska blokada diferenciala spredaj Nsdpfx Ajzu Aizenzewk Udobje: - Električni pomik oken - Električno nastavljiva, ogrevana in zložljiva zunanja ogledala - Osrednje zaklepanje z daljinskim upravljanjem Multifunkcijski zaslon / računalnik na vozilu Rezervno kolo s standardnimi pnevmatikami in dvigalo Generator 240 A Meglenke s funkcijo pri vklopu zavojnega svetila Dnevne luči LED Osvetlitev tovornega prostora LED (4x) ?? Ogrevana prednja stekla poškodovana - kamen udaril v steklo in povzročil razpoko ?? ?? Prodaja podjetnikom 16.900,00 €, = neto 14.200,00 € ?? Izvedba Trend Osvežena različica Paket barv za stil - Sprednji odbijač, zadnji bočni deli in zunanja ogledala, barvani v barvi vozila Zadnja krilna vrata brez oken, kot odpiranja 180 stopinj Drsna vrata na desni strani Medosna razdalja 3300 mm (L2, podaljšana) Motor 2,0 L - 77 kW TDCi KAT 6-stopenjski ročni menjalnik Registracija kot kombi Oprema tovornega prostora: Ločilna stena tovornega prostora, oblazinjena v kabini (zvočno izolirana), brez oken, z odklopno loputo. Robustna tla, prevlečena s plastjo. Stene, oblazinjene s ploščami iz trdih vlaken. Svetla LED osvetlitev. Mere tovornega prostora v cm (približne vrednosti): - Dolžina: - spodaj 284, z odklopno lopato 347 - v sredini 273 - zgoraj 268 - Višina: 137 (pod prečno nosilcem) Pnevmatike: Vse vremenske/celoletne pnevmatike 215/65 R 15 na jeklenih platiščih s plastičnimi pokrovi, približno 8 mm globine profila spredaj in približno 9 mm zadaj. Zgodovina servisiranja - glede na digitalno evidenco servisiranja, servisirano pri pooblaščenem servisu Ford: 05.2025 / 41.931 km: Redni servis + menjava motornega olja + filter za cvetni prah/vonjave 03.2026 / 86.618 km: Redni servis + menjava motornega olja + zračni filter + filter za cvetni prah/vonjave Kljub skrbni obdelavi lahko pride do napak pri vnosu in prenosu podatkov v opisu vozila, vključno s slikami. Pridržujemo si pravico do spremembe cen in razpoložljivosti.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 625 Ah, napetost baterije: 80 V, skupna višina: 625 mm, skupna dolžina: 1.023 mm, skupna širina: 849 mm, Tested forklift battery for your forklift - 80V 5PZS 625AH - DIN A + 1-year warranty + Including Aquamatic system + Including end cell connectors & REMA 320 plug (other plugs available upon request) + Capacity: min. 90–100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,023 mm Width 849 mm Height 625 mm Weight: approx. 1,470 kg Suitable for the following models and more: Linde E25-336-00/Flat Linde E25/-L/-RL-387-00 Linde E25 S-1276-00 Linde E25 S-336-00 Linde E30-336-00/Flat Linde E30-387-00 Linde E30 L-1252-01 Linde E30 L-387-00 /side battery change Linde E30 RL-387-00Sti Linde E30 S-1276-00 Linde E30 S-336-00 Nwjdey Rnq Eepfx Anzsk Linde E35-387-00 Linde E35 L-1252-01 Linde E35 RL-387-00 Daewoo B25X Still R60-25 Still RX60-30 Still RX60-35 Still RX60-40 Toyota 7FBMF20/25 Toyota 8FBMT25 Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30KPAC Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Common battery sizes available upon request. Delivery possible.

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), Prodam zgornji rezkalni stroj za kopirno rezkanje Žičnica FPŽX 300/200, izdelan v Jugoslaviji, Ljubljana, Slovenija. Nodpfxod Nzfco Anzewk

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches Nwjdpfx Aot Hwwqonzok - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: novo, Leto izdelave: 2026, Oprema: ABS, 5-osni nizkopodnožni priklopnik Nwoderlm Txopfx Anzsk Za več informacij nas prosimo kontaktirajte.

Leto izdelave: 1971, stanje: rabljeno, Technical details: Maximum wheel diameter: 300 mm Maximum module: 5 Njdpfjvc An Dox Anzjwk Minimum module: 0.5 Maximum workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions (LxWxH): 1.8 x 1.9 x 2.5 m Dimensions of control cabinet (LxWxH) No. 1: 1.95 x 0.4 x 1.95 m Dimensions of control cabinet (LxWxH) No. 2: 0.8 x 0.23 x 1.95 m Dimensions of extraction unit: 1.4 x 0.7 x 0.55 m Electronically controlled gear flank grinding machine Suitable for modules up to 5 and a diameter of 240–300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30' Max./min. helix pitch with 24 teeth: 6000 / 200 mm Maximum helix angle, both sides: 45° Grinding spindle speed: 1900 rpm Without dressing device Equipment: Approx. 69 change gears, extension tubes and various accessories Two of these machines are available for sale. Both machines are powered by two shared control cabinets and an extraction unit.

Stanje: rabljeno, Leto izdelave: 1985, 1985 | Langendorf SATÜ 18/18, popolnoma obnovljen | Nizkotilni prikolica 📍 Lokacija: Avstrija 🚛 Dostava je možna na vaš naslov – uporabite naš kalkulator za dostavo, da ocenite stroške prevoza! 💰 Kupite zdaj za 13.900 EUR ali podajte ponudbo. Nwjdpfezrltwox Anzjk Plačilo ob dostavi je mogoče za ugodno ceno (odvisno od odobritve)* 👷‍♂️ Pregledal neodvisni strokovnjak 12 točk pregleda, 9 odobrenih ✅, 3 nepopolnih ℹ️, 0 stroškov ⚠️ 📌 Opomba inšpektorja: Na novo obnovljen, po popravilu ni bil uporabljen. 📄 Želite videti celoten pregled, dodatne fotografije ali video? Nasvet: Referenčna oznaka »39629 Equippo« se pogosto uporablja pri iskanju dodatnih podrobnosti na spletu. 💡 Zakaj je ta stroj in naša storitev posebna: ✔ Temeljit pregled s strani strokovnjakov ✔ Dostava na gradbišče je možna ✔ Garancija vračila denarja ✔ Varne in prilagodljive možnosti plačila 🔄 Razmišljate o drugih možnostih opreme? Ponujamo uporabna orodja in vire za vse lastnike in uporabnike opreme – zlahka dostopne na naši platformi.

Stanje: zelo dobro (rabljeno), Panel Saw Paoloni P 300 with Scoring Unit | 3200mm Sliding Table, Italian, 790kg Description: For sale: A professional, classic panel saw from the renowned Italian manufacturer PAOLONI, model P 300. This machine features an extremely heavy cast iron and steel construction (weighing 790 kg), ensuring exemplary stability, rigid geometry, and excellent vibration damping during operation. It's a proven, mechanically reliable design without unnecessary, failure-prone electronics—ideal for craft carpentry workshops and furniture production. Nwedpoy Tzqksfx Anzsk ⚙️ TECHNICAL DATA FROM NAMEPLATE: Manufacturer: Paoloni (Fano - Italy) Model: P 300 Year of manufacture: 1997 Serial number: 0602 Supply voltage: 380 V (Three-phase) Frequency: 50 Hz Motor power (KW): 4.75 kW Current consumption: 11 A Machine weight: 790 kg 💎 MAIN FEATURES AND EQUIPMENT: Long Aluminium Sliding Table: Ensures smooth, light feed and high cutting precision. The table length allows effortless panel sizing of full-format boards (cutting length approx. 3200 mm). Scoring Unit: Essential for clean cutting of laminated boards, chipboards, and MDF—guarantees chip-free cuts on the underside of the material. Precise Geometry Adjustment: Manual, reliable lifting/lowering of the main saw blade and tilt angle adjustment (range 0°–45°) via an ergonomic handwheel with dial indicator. Stable Side Table: Constructed on a robust, telescopic support arm with a long crosscut fence and two flip stops for repeatable series cuts. Parallel Fence: Rigid mounting on a solid steel bar, ensuring repeatable dimensions on the right side of the blade. 📐 WORKING PARAMETERS (Standard for the P 300 series): Cutting length: approx. 3200 mm Cutting width with right-hand fence: approx. 1150 mm Max. diameter of main blade: 300 mm - 350 mm Cutting height: up to approx. 100 - 115 mm (depending on blade used) 🛠️ TECHNICAL CONDITION: Complete machine, in good visual and technical condition. Ready for immediate operation in the workshop.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 89 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: bela, Leto izdelave: 2023, Številka objekta # 30572 Cargofloor 10 mm drseča stena pnevmatsko zaklepanje vrat Jost osi disk zavore 2x dvižna os pnevmatike 385/65 R 22,5 nadgradnja (notr.): 13.450 x 2.450 x 2.700 mm Nwodpfxjx Art Se Anzok portalna vrata pomična ponjava platforma z lestvijo Wabco Smart Board z 212.081 km orodjarna delovna luč stranska zaščita proti podvozu nosilec lestve/metle zaščita zadnjih luči dviganje/spuščanje ABS/EBS Jost podporna stojala Leasing ali financiranje možno na zahtevo!!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W09688218KGB34081, naslednji pregled (TÜV): 01/2026, Leto izdelave: 2019, Tandem low-bed trailer with drive-through capability, side-adjustable loading ramps, and removable corner posts; equipped with twin tires; including TÜV inspection and registration documents Unladen loading height: approx. 87 cm Gross vehicle weight: 19,000 kg incl. 1,009 kg support load Payload: approx. 15,000 kg Internal loading dimensions: approx. 6.20 m x 2.45 m x 0.40 m Hitch system: continuously height-adjustable drawbar, 50 mm towing eye Electrical system: in accordance with ECE-R 48.03; 24 volt, 15-pin connector Crossmembers integrated into longitudinal beams Ramp widening to 70 cm, allowing ramps to be pushed together almost completely (gap of only approx. 5 cm); with reinforced spring lift system Ramp extension to 2.70 m, plus chamfered rear loading platform (1.30 m) – ideal for aerial work platforms, forklifts, milling machines, etc. Galvanized gratings instead of wooden ramp decking, with additional spring assistance Curtainsider body – specification as follows: Internal loading dimensions: approx. 6,200 x 2,450 x 3,000 mm (L/W/H) Overall height: approx. 4,000 mm Front wall and rear with fixed side stanchions Front wall with reinforced front supports Superstructure frame with continuous longitudinal aluminum beams Solid roof construction Truck tarpaulin made from high-quality PVC, roof tarpaulin with translucent strips Nwedpfx Aowfghljnzok Central curtainsider pillars right and left Full-height painted front wall (RAL ???7) Three rows of aluminum slat inserts each, left and right Side tarpaulins as sliding curtains with tensioning system made from reinforced PVC with vertical and horizontal straps in close spacing Rear tarpaulin as roll-up system (Rollfix) with automatic retraction via integrated stainless-steel (V2A) springs Interior lighting present Side tarpaulins with cut protection Sliding roof frame with folding end carriage (Edscha type) Additional equipment: Air suspension with raise/lower function for 18-t vehicles 1 pair of lashing recesses (5,000 daN) integrated mid-side in trailer floor profile 1 pair of lashing recesses (5,000 daN) at front floor instead of hooks, fitted with eyelets suitable for lashing chains 2 LED reversing lights at rear (activated via reverse gear) 2 LED work lights at rear Infocenter and diagnostic tool on passenger side

Stanje: rabljeno, Leto izdelave: 2011, vrsta prenosa: drugo, prva registracija: 01/2011, barva: oranžna, prevoženi kilometri: 1.001 km, lastna masa: 750 kg, voznikova kabina: drugo, Vehicle location: Bovenden Nwedpfx Aoup Ht Tenzok Body type: Demountable salt spreader, approx. 2.5 m³, mounted on a hook-lift frame, overall length 3,800 mm up to the rollers! Salt spreader approx. 2.5 m³. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 500 Ah, napetost baterije: 48 V, skupna višina: 630 mm, skupna dolžina: 979 mm, skupna širina: 434 mm, Tested forklift battery for your forklift truck - 48V 4PZS 500Ah - special tray + 1-year warranty + Including Aquamatic system + Including end discharge set & REMA 320 plug (other plugs available on request) + Capacity: minimum 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 979 mm Width 434 mm Height 630 mm Weight: approx. 750 kg Suitable for the following models and others: Still R 20-14 Jungheinrich ETV A 12.5 Toyota 2FBE15 Toyota 5FBE15 Toyota 5FBE18 Toyota 7FBE10 Toyota 7FBE15 Toyota 7FBRE16 Toyota 8FBE15 Toyota 8FBE15T Toyota 8FBKT16 Nodpfx Aoy Rnkfjnzjwk Toyota 8FBMT15 Toyota FTB15-E2S Toyota/BT RR-B 2 Toyota/BT RR-B 3 Toyota/BT RR-M 14 Toyota/BT RR-M 3 Toyota/BT RR-M 6 Toyota/BT RR-N 3 Crown 3.0 Crown SC 4220 Crown SC 5320-1 Crown SCT 6020 Atlet ET 150 Atlet ET 180 Balkancar EV698 CTC PLANET PL416/420/423 Caterpillar EP15CPDJ Caterpillar EP15PNT Caterpillar EPB4A Daewoo B13 Daewoo B13 T-2 Daewoo B15 Daewoo B15 T Daewoo B15 T-2 Daewoo B15 T-5 Daewoo BT15 Datsun 150 Doosan B13T Doosan B157-5 Doosan B15T-5 Doosan B15T-7 Doosan B20T-2 Heli CPD 15 Heli CPD 18 Heli CPD 25 Hubtex MQ 35 Hyster J1.80-2.00XMT Hyundai 15BT-7 Hyundai 15BT-9 Hyundai 16B-9 Hyundai 16B-9F Hyundai 20BRJ-7 Hyundai 25BRJ-7 Hyundai HBT18T-S Komatsu FB15-12 Komatsu FB15M-2 Komatsu FB18 Manitou ME 313 Manitou ME 315 Mitsubishi FB13PNT Mitsubishi FB15PN Nichiyu FBT13 Nichiyu FBT15-30 Nichiyu FBT18 Nichiyu FBT20PN Nissan 01L150 Nissan 1N1 TX Nissan 1N1L18HQ Nissan 1N1L18Q Nissan A1N1L18Q Nissan N01L150 Nissan N01L15U Nissan TX15 Nissan TX18 Nuova Detas SE 315 OMG ERGAS 16 TA 4 TCM FTB18-E1 UniCarriers TX3-15S Yale ERP 16 ATF Yale ERP 18 ATF Common battery sizes available on request. Transport can be arranged.

Stanje: zelo dobro (rabljeno), HM saw grinding machine VOLLMER model CHD250R2 with loader VOLLMER model ND230 Nedpsipqztefx Anzewk

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Nodpfx Anjt Hxagjzowk Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, lastna masa: 2.600 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/1993, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 12 m³, velikost pnevmatike: 205/65 R17,5, medosna razdalja: 990 mm, Colour: orange/silver Nodetr Tzdepfx Anzowk Drum brakes Payload: 7,400 kg Leaf suspension Side walls: 600 mm + 400 mm extension BPW axles Lashing rings Subject to errors and alterations.

Stanje: novo, with rapid stroke system - NEW - Drilling width: 240 mm Drilling depth: 180 mm Drilling stroke: 160 mm 2-speed motor, 1400/2800 rpm instead of 2.2 kW Motor speed: 2800 rpm Drill chuck mount: 20 mm Table size: 600 mm x 320 mm Plunger system: 1 eccentric Weight: 246 kg Item No. 300015 Nwsdpevwf H Ejfx Anzok including accessories: 1 piece 2-speed motor, 1400/2800 rpm instead of 2.2 kW, Item No. A250070 1 piece 90° stop, Item No. A350128 1 piece horizontal drilling grid system with 4 rows of holes (16, 20, 22, 25 mm), Bowden cable operation, Item No. A300255 1 piece 4-wheel chassis with 2 swivel castors and 2 locking devices on own frame, Item No. A350415 1 piece eccentric plunger with column and clamping cross, Item No. A250055

Stanje: rabljeno, največja dovoljena obremenitev: 1.115 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, prva registracija: 03/2026, dolžina tovornega prostora: 3.010 mm, širina tovornega prostora: 1.670 mm, višina nakladalnega prostora: 161 mm, skupna širina: 2.200 mm, skupna višina: 1.185 mm, * Univerzalni transporter, proizvajalec Pongratz, tip L-PAT 300/16 G-K, transporter vozil, skupna masa: 1.500 kg, z nakladalno rampo, nizkopodna prikolica, z vztrajnostno zavoro, in drugo. Pridržujemo si pravico do napak in vmesne prodaje. Nodpfxeyn Uggs Anzswk

Stanje: rabljeno, prevoženi kilometri: 945.418 km, moč: 132 kW (179,47 KM), prva registracija: 12/2005, vrsta goriva: dizel, lastna masa: 5.580 kg, največja dovoljena obremenitev: 1.910 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 4.200 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 3, vzmetenje: jeklo-zrak, število sedežev: 3, dolžina tovornega prostora: 6.180 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.200 mm, Oprema: ABS, dvižna zadnja plošča, kabina, klimatska naprava, nadzor oprijema, parkirni grelec, računalnik na krovu, servovolan, sistem za imobilizacijo, spojler, tempomat, zapora diferenciala, German vehicle. Condition as per photos. BÄR tail lift, type: BC 1000S4; load capacity: 1,000 kg. Box body dimensions: L=6,180 x W=2,400 x H=2,200 mm. Side door on the right with access steps. One row of lashing rails on both the right and left sides. Air conditioning, auxiliary heater, aluminium chequered floor, manual transmission, ABS and ASR, engine brake, driver’s comfort seat, air suspension, heated electric mirrors, roof hatch, radio/CD player, roof spoiler, sun visor. Wheelbase: 4,200 mm. Gross vehicle weight: 7,490 kg. Curb weight: 5,580 kg. Payload: 1,910 kg. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, DGUV, SP, or UVV testing. More trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misunderstandings regarding the vehicle’s condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Nwedpfxov Tdngj Anzjk All information provided without guarantee. We accept no liability for errors or inaccurate information in this offer. The purchaser is obliged to independently verify the condition and equipment of the vehicle/goods. Subject to changes, prior sale, and errors.

Stanje: novo, Leto izdelave: 2024, nosilnost: 3.000 kg, Oprema: nožno daljinsko upravljanje, 3,000 kg load capacity welding positioner, extremely robust design Continuously variable speed control from 0.05 to 0.7 rpm Njdpfev En U Iex Anzjwk Turntable diameter 1,400 mm Tilting angle up to 120° Height (horizontal) 1,300 mm, height (tilted, to center) 1,050 mm Dimensions: length 2.0 m x width 1.4 m Handheld remote control with digital display and dual foot pedal control

Stanje: rabljeno, prevoženi kilometri: 573.000 km, moč: 309 kW (420,12 KM), prva registracija: 12/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, Leto izdelave: 2015, Oprema: ABS, klimatska naprava, žerjav, MERCEDES AROCS 2542 Plato 6,85 m + žerjav / 6x2 Uvožen / brez nesreč V DOBREM STANJU! LETO PROIZVODNJE: 2015 PREVOŽENI KILOMETRI: 573.000 km OPREMA: • ABS • Električna stekla • Klimatska naprava • Servovolan • Tahograf • Retarder TOVORNI PREDELEK: 685 x 248 x 80 cm NOSILNOST: 13.000 kg SKUPNA MASA: 26.000 kg VELIKOST PNEVMATIK: 315/80R22,5 MEDOSNA RAZDALJA: 510/135 cm Njdouqhqvspfx Anzswk VZMETENJE: SPREDAJ: listnato vzmetenje ZADAJ: zračno vzmetenje ŽERJAV: PALFINGER PK 13001 - K B KONTAKT: - KUBA – POLJSKO, ANGLEŠKO, NEMŠKO, ITALIJANSKO - SEBASTIAN – POLJSKO, NEMŠKO, ITALIJANSKO, ????? - LASZLO – MADŽARSKO - COSTEL – ROMUNSKO (Uredimo vse izvozne formalnosti vključno s številkami) - RADEK – ?????

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Weishaupt RGMS 30 dvojnestni gorilnik plin + težko olje Moč: 2300KW Leto izdelave: 2008 Njdpsmnqbwofx Anzjwk Ogled je možen le po telefonskem dogovoru! Prednostna prodaja trgovcem, podjetjem ali za izvoz. Vsi podatki brez garancije, napake in vmesna prodaja so pridržani. Prodajalec ne prevzema odgovornosti za tipkarske ali prenosne napake. Seveda uredimo vse formalnosti. Nakladanje je možno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Buderus GE315 Heating Boiler Output: 170 kW Burner: On request, available with Weishaupt oil or gas burner Inspection by prior telephone appointment only! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee. Subject to errors and prior sale. The seller does not assume liability for typing or data transmission errors. Nwodpomnqcmsfx Anzek Of course, we can also take care of all formalities. Loading available.

Stanje: rabljeno, Blower filter unit, welding fume filter, welding fume extraction, respiratory protection device - Filter - in case - without battery Nwodsd Duvbopfx Anzjk - Dimensions: 420 x 165 x H335 mm - Weight: 3.2 kg

Stanje: rabljeno, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2010, skupna širina: 2.600 mm, skupna višina: 3.850 mm, Oprema: ABS, * Tridec * Nakladalna ploščad * Dvižna os * Hladilna enota Frigoblock HK 25 * EuroScan ----Interna številka vozila: 7693----Pridržujemo si pravico do napak in vmesne prodaje. Podpora prek WhatsApp na voljo! Nedpfx Ansllr Naszewk Za vprašanja o vozilu ali več informacij nam pišite preko WhatsAppa. Whatsapp Whatsapp