Cnc Brusilni In Stružni Stroj nakup rabljenega (124.705)

Stanje: rabljeno, Leto izdelave: 1987, Premer vrtenja: 400 mm Dolžina struženja: 600 mm Premer nihanja: 600 mm Vrtina vretena: 73 mm Tehnični podatki so navedeni po podatkih proizvajalca oziroma upravljavca in zato za nas niso zavezujoči. Pridržujemo si pravico do vmesne prodaje; izključno veljajo naši splošni pogoji poslovanja in prodaje. Bodpfx Ajyutrushnjlh O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, kapaciteta žerjava 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Leto izdelave: 2022, stanje: novo, We offer oil coolers designed to reduce cutting oil temperature during operation on CNC lathes. The unit is brand new. Blodpelzghpjfx Ahnoh Temperature range: 5 to 40 °C Flow rate: 40 liters per minute If you have any questions, we are happy to assist you. Did you know? The exhaust air from the cooler can also help reduce heating costs, as the dissipated heat is immediately released into the surrounding environment.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 1 rabljeni brusilni in polirni stroj Proizvajalec: ATM Tip: Saphir 320 Leto izdelave: 2003 Tehnični podatki: Serija 320 – en disk Premer plošče/diska: 200 mm Hitrost: 600 obr/min Napetost: 220 V / 60 Hz, 1 faza Teža: 24,5 kg Bledpfoxuq I Sex Ahnoh

Stanje: rabljeno, Premer vrtenja 280 mm Dolžina vrtenja 800 mm Krmiljenje Siemens Tip 840 D Bjdjyqv Epopfx Ahnjlh Hitrost vrtenja 4000 obr/min Premer kroženja 320 mm Trivpenjalni vpenjalni vrtljivi vpenjalni Forckrath 250 mm Stroj je bil obnovljen Tehnični podatki so navedeni po podatkih proizvajalca oz. uporabnika, zato zanje ne prevzemamo odgovornosti. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščne površine, zmogljivost žerjava 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaš obrat, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: rabljeno, Leto izdelave: 2001, Swing diameter 290 mm Turning length 850 mm Max. turning diameter over bed 600 mm CNC control Siemens Type 840 D Spindle bore 103 mm Spindle speed 3000 rpm Driven tools 3000 rpm Rapid traverse – grinding spindle 25 m/min Blsdpfxoyqv Auo Ahnoh Total power requirement 65 kW Machine weight approx. 11 t Serial no. 1130.2011-30 Equipment: Main spindle / counter spindle 2 power chucks 2 tool turrets C-axis Enclosure Chip conveyor Coolant system 22 bar Offer price without tooling Optional accessories available: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools) The technical data are manufacturer’s or operator’s specifications and therefore non-binding for us. We reserve the right to prior sale; only our terms and conditions apply. About us: Over 400 of our own machines in stock Over 15,000 m² warehouse area, crane capacity 70 t More than 10,000 accessory items for your workshop If you are looking to sell machines, production lines or your business, please contact us. For more offers, visit our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: dober (rabljeno), Leto izdelave: 2013, Siemens 840D sl CNC control Turning length: 2000 mm Maximum spindle speed: 3,100 rpm Bsdpfx Asv Nw Npehnjlh Torque: 1,200 Nm Quill diameter: 140 mm Quill force: 5–30 kN Total connected load: 125 kW Machine weight: approx. 20 t The machine is still under power and can be inspected at the owner’s facility. It is in good condition, with excellent machining accuracy in turning operations. Note: The milling drive is not operational. A repair quotation from Niles is available upon request. Includes hydraulic steady rest. Technical specifications: Turning length: 2,000 mm CNC control: Siemens 840D sl Main spindle: - Max. speed: 3,800 rpm - Max. torque: 1,200 Nm Quill diameter: 140 mm Center taper: Morse taper 6 (MK6) Quill force: 5–30 kN Feed rate Z-axis: … mm/min Rapid traverse Z-axis: 40 m/min Feed rate X-axis: … mm/min Rapid traverse X-axis: 25 m/min Total connected load: 125 kW Machine weight: approx. 20 t

Stanje: rabljeno, Leto izdelave: 2007, Turning length: 2,500 mm Control: Sinumerik 840 D Spindle nose: A 11 Number of tools: 48 Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm C-axis: 0.1–30 rpm Quill diameter: 160 mm Internal taper: MK 5 Maximum tool length: 500 mm Maximum tool weight: 15 kg Machine weight: approx. 27 t Space requirements: approx. 8.4 x 4.0 x 2.5 m Technical details: Blodpfxowwaruo Ahneh Nominal turning length: 2,500 mm Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle nose as per DIN 55026: A 11 Bar capacity: 123 mm Front bearing diameter: 200 mm Oriented spindle stop: 0–359 degrees Drive power at 100/60% duty cycle: 37/45 kW Total speed range: 10–2,500 rpm Number of speed ranges: 2 Speed range I: 10–775 rpm Speed range II: 20–2,500 rpm Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GD12002, teža obdelovanca (maks.): 150 kg, dolžina brušenja: 1.000 mm, premer brušenja: 360 mm, skupna masa: 4.700 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Maks. premer brušenja: 360 mm Maks. dolžina brušenja: 1.000 mm Maks. teža obdelovanca: 150 kg PODROBNOSTI O STROJU Moč glavnega pogona: 5 kW Mere & Teža Dimenzije (D x Š x V): 3.030 x 2.250 x 2.030 mm Teža: 4.700 kg OPREMA PLC krmiljenje Konjiček Delovna vretena Brusilno vreteno s prirobnico in brusnim kolutom Notranja brusilna enota Sistem za mokro brušenje Bjdpfx Ajy Ukz Ujhnolh Električno ročno kolo Delovna luč Centrična konica Vpenjalna glava Priročnik

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 16 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.070 mm, pomik osi Y: 1.280 mm, prebojni premer: 76 mm, TEHNIČNI PODATKI Prebijalna sila: 165 kN Delovno območje: 2.070 x 1.280 mm Debelina pločevine: 6,4 mm Teža obdelovanca: 150 kg Blodpfxozapqde Ahnjh Premer prebijanja: 76,2 mm Hitrost X-osi: 80 m/min Hitrost Y-osi: 55 m/min Krmiljenje: CC 220 PODATKI O STROJU Teža stroja: pribl. 8.000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 51.658 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 8 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, TEHNIČNI PODATKI Širina pločevine: 2.500 mm Dolžina pločevine: 1.250 mm Debelina pločevine: 8 mm Prebijalna sila: 220 kN PODATKI O STROJU Obratovalne ure: 51.658 h Teža stroja: pribl. 11.050 kg Bjdpfx Ajy U U Npehnjlh OPREMA - TRUMPF Sheetmaster

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 30.430 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, prebojni premer: 76 mm, TEHNIČNE PODROBNOSTI Tlačna sila: 220 kN Največja debelina pločevine: 6,4 mm Premer izseka: 76,2 mm Pomik X-os: 2.500 mm Pomik Y-os: 1.250 mm Pozicionirna hitrost X-os: 90 m/min Pozicionirna hitrost Y-os: 60 m/min Pozicionirna hitrost simulacije: 108 m/min Pozicionirna hitrost rotacijske osi: 360 °/s Teža obdelovanca: 150 kg Najmanjši programski pomik: 0,01 mm oz. 0,01° Orodne postaje: 15 kosov Čas menjave orodja: 1,5 - 6,5 s Bsdsy U U Edjpfx Ahnolh PODROBNOSTI STROJA Dimenzije: 6.400 x 5.800 x 2.100 mm Teža stroja pribl.: 11.050 kg Obratovalne ure: 30.430 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 59.000 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 18 t, delovna širina: 1.270 mm, delovna višina: 2.540 mm, prebojni premer: 76 mm, najv. debelina pločevine: 6 mm, TEHNIČNE PODROBNOSTI Bjdpfx Aey U Ub Sjhnolh Delovno območje: 2.540 x 1.270 mm Prebijalna sila: 18 t Debelina pločevine: maks. 6,4 mm Teža obdelovanca: maks. 150 kg Premer prebijanja: maks. 76,2 mm Hitrost: maks. 90/60/108 m/min Natančnost: 0,1 mm PODROBNOSTI STROJA Krmiljenje: Bosch Tip 3 Dolžina: 5.500 mm Širina: 5.900 mm Višina: 2.200 mm Teža: 11.400 kg OPREMA - Stabilen, dobro dostopen C-okvir - Koordinatno vodilo za visoko natančno obdelavo - Linearni magazin z 19 mesti za orodje - 2 primeža - Pogoni s potrebujejo manj vzdrževanja, trifaznimi servo motorji - Dodatna vpenjalna naprava s programiranim pritiskom - Kroglične mize - Delni žleb 180 x 200 mm - 2 posodi za dobre kose - Posoda za odrezke - Samodejni izklop

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Wide Belt Sander VIET Target 211 A Bjdpfxsy Exhwe Ahnslh Calibration and fine sanding machine with 2 sanding units and a single motor, top sanding configuration Working width: 1100 mm Sanding belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 - 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st Unit: Sanding roller, rubber-coated, 90 Sh 2nd Unit: Sanding pad, rigid & air-cushion sanding pad, time-controlled Compressed air requirement: approx. 6 bar Extraction port diameter: 2 x 150 mm Dimensions (approx.) L x W x H = 1700 x 1750 x 1800 mm Weight (approx.): 1400 kg Automatic workpiece thickness setting with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Sanding belt oscillation Sanding belt (emergency) stop with disc brakes Table extension with 2 rollers on infeed and outfeed sides Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs. re-covered graphite sanding shoe inserts NEW bearings for deflection rollers NEW V-belts for the drive motor Note on used machines: • Technical information and prior sale subject to change. • Listed prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and phone number!)

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: Bljdpfxsych Igo Ahnsh • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Bodpjychqzsfx Ahnelh Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. Bljdpswyda Usfx Ahneh • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, COURSE ROOM MACHINE For sale is a Drechselmeister Stratos FU 230 LV (long version) with a center distance of 1,000 mm. The machine is in excellent condition – it is a course room machine with very low operating hours. You therefore receive full warranty. Technical specifications: - Center height: 230 mm - Swing over bed: 455 mm (up to 800 mm with optional outboard turning attachment!) - Center distance: approx. 955 mm in the SPECIAL MODEL STRATOS FU-230 LV (can be further extended with an optional bed extension!) - Spindle thread: M33 x 3.5 (hardened), with ASR (Euro) safety groove Bjdpfx Ahowud Izsnolh - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (230 V connection) - Weight SPECIAL MODEL LV: 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping via freight forwarder: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related terms: wood lathe, lathe, turning machine, turning bench, woodturning, turning tools, wood turning, turning, machine Reference: 5912

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, TRAINING ROOM MACHINE For sale is a used training room lathe Drechselmeister Twister FU 200 with a centre distance of 715 mm. The machine is in very good condition. Bjdpfx Aowudkishnolh Technical Data - Centre height: 200 mm - Swing over bed: 395 mm (700 mm with optional outboard turning attachment) - Centre distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - Dual-stage brake switch - Weight (stand version): 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: Wood lathe, lathe, turning machine, woodturning lathe, wood turning, turning tool, woodturning, turning, machine Reference A0117

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 615 B, Stroj je delujoč, manjka rezervoar za hladilno tekočino, potrebno je barvanje. Bsdoza A E Ujpfx Ahnelh

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Features and technical data: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis CNC controlled, with working length 1300 mm, max. traverse speed 105 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter; drilling depth from 0-35 mm (with drill bit length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in the glue container - 1 pc. left side stop, 1 pc. right side stop, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm 1 pc. TCT control unit with: Integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensions, automatic workpiece mirroring and process optimization, 4 work fields assignable with different programs, graphic workpiece display, parametric programming, zero-point shifting, programmable job lists, error diagnosis in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with CNC-controlled, dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Traverse speed max. 30 mm/sec. 1 single-spindle vertical drilling unit from above, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, max. drilling depth (Z) 30 mm (with drill bit length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm Bjdpfey Ih Skox Ahnolh (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical inclined clamping cylinders 10° with mount, additionally 1 keyboard with mount Availability: by arrangement; currently being overhauled at the Ganner factory Location: Austria

Stanje: rabljeno, Kündig ENORM PRIMO – TOP STROJ S KONSTANTNO MIZO / avtomatska nastavitev glave Avtomatski stroj za kalibracijo in fino brušenje z širokim trakom Kombinirana enota kontaktni valj in pnevmatična brusilna blazina Enormatic Digitalni prikaz debeline za debelino obdelovanca Moč motorja pogona traku približno 9 kW Višina kontaktnega valja brezstopenjsko nastavljiva glede na zrnatost Vhodna in izhodna miza z valjčnimi nosilci Bsdpfx Ahey Tutronolh Delovna širina 1100 mm Hitrost podajanja 2,5 - 15 m/min Stroj bo DELAVNIŠKO OBNOVLJEN Na zalogi Lieboch

Stanje: rabljeno, Leto izdelave: 2001, Condition: used Year of manufacture: 2001 Stock number: 9647 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €24,400 Available in stock: 1 Punching force: 30 tons Working area: 1250+N x 1000 mm X-axis travel (with repositioning): 1250 mm Y-axis travel: 1000 mm X-axis speed: 40 m/min Bljdpfswirkgox Ahneh Y-axis speed: 30 m/min Combined X+Y speed: 50 m/min Stroke: 30 mm Max. stroke rate (in 1 mm steps, 1 mm sheet thickness): 730 strokes/min Max. stroke rate (in 25 mm steps, 1 mm sheet thickness): 300 strokes/min Table height: 980 mm Motor power: 4 kW Oil tank: 115 l Length: 4000 mm Width: 2780 mm Height: 1900 mm Transport dimensions: 4000 x 2300 x 1900 mm + Z mm Weight: 4800 kg Equipped with MTE6 6-station multi-tool holder (max. diameter 24 mm) 2 clamping claws Table with brushes, table size 1970 x 2260 mm Foot pedal 2 additional single die holders PC with Euromac Eurowin 8.36 software Max. punching force: 300 kN Automatic repositioning up to 10,000 mm Max. punching diameter with single tool: 88.9 mm Max. punching diameter with MTE6 multi-tool holder: diameter 24 mm Max. clamp jaw opening: 7 mm Transport width: 2350 mm Operating manuals in English and Italian CE declaration available INCLUDES LARGE TOOLING PACKAGE Multiple pieces each of the following dimensions: Round: diameter 2.5/2.8/3/3.12/3.2/3.5/3.9/4.1/4/4.5/5/5.2/5.5/6/7/7.5/8/8.5/9/9 .5/10/10.5/11/11.5/12/12.5/13/13.5/14/15/16/18/19/20/21/23 mm Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong slot: 10x6.5/12x8.5/12.2x10.7/18x5 mm BUYING USED MACHINES IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & functional videos of the current condition • ON-SITE LIVE CHECK Live demonstration at our facility • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Mazak, model krmilnika: Mazatrol SmoothAi, Description: General: Year of manufacture: 2023 Control system: Mazak Mazatrol SmoothAi Max. machining diameter: 600 mm Max. machining length: 850 mm Main spindle: Technology: Motor spindle Speed: 6,000 rpm Power: 11 kW Max. torque: 184 Nm Bar capacity: 51 mm C-axis: 0.0001° Chuck: 3-jaw chuck Clamping cylinder: Hollow clamping cylinder Counter spindle: Technology: Motor spindle Bjdpfx Ahjyrvzmjnjlh Speed: 6,000 rpm Power: 11 kW Max. torque: 184 Nm Bar capacity: 51 mm C-axis: 0.0001° Tailstock function: Yes Tool carrier (X/Y/Z/B): Technology: Gantry with milling spindle X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis: -30° / +210° Milling spindle speed: 20,000 rpm Power: 24 kW Tool holder: HSK 63 Tool magazine: Technology: Rack magazine Number of stations: 250 Tool changer: Double gripper Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 15 bar Workpiece measurement: Renishaw RMP 60 Tool measurement: Renishaw tool setter Bar feeder: IRCO ILS-MUK 7012 Finished parts removal: Parts catcher Software option I: 5-axis simultaneous machining Software option II: Synchronous thread cutting Software option III: Cylinder interpolation Software option IV: Tool radius compensation Software option V: Tool length compensation Emulsion mist separator: Mechanical Set-up operation: Electronic handwheel

Stanje: generalkompletno obnovljen (rabljeno), Spodnji in zgornji vrtalni stroj, nagibni, za sedišča stolov tipa Old America ali podobne izdelke št. 4 neodvisne spodnje nagibne skupine št. 2 zgornji navpični nihajni skupini Bsdpfxoytr Edj Ahnjlh

Stanje: rabljeno, Leto izdelave: 1986, Rabljeni stroj Bsdpjyncppofx Ahnslh Leto izdelave: 1986 Oprema in tehnični podatki: - z vrtalno glavo za vrste lukenj s 7 vreteni in zatiči za pozicioniranje - razdalja 32 mm - z vrtalno glavo za BLUM tečaje - z vrtalno glavo za Hettich tečaje - z ustreznimi vtisnimi matricami - motor 400 V, 0,75 kW, 2800 obr/min - z naslonskimi palicami Razpoložljivost: takoj Lokacija skladišča: 63934 Röllbach