Arburg Zylinder nakup rabljenega (604)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 9.171 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances operator comfort. Take advantage of this opportunity and purchase this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. Hnodpfxeyg I Iho Ahusl • Programmable and controlled build-up of clamping force • Advanced two-stage clamping program • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design • Sintered metal check ring • CrN coating on screw and backflow ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2 – servo-controlled dual-circuit pump system: • Two regulated hydraulic pumps enable precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch display (38.1 cm) • Multilingual user interface (German, English, local language) • Heating power zones 1–6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Additional equipment • Not included in the listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 54.454 h, premer vijaka: 25 mm, Stroj Arburg 470 H 1000-170 je bil izdelan leta 2014. Gre za hidravlično brizgalno maso s zapiralno silo 100 t in premerom polža 25 mm. Deluje pri 400 V 3~, 50 Hz s skupno priključno močjo 75 kW. Idealen za natančne brizgalne aplikacije. Za več informacij o tem stroju nas kontaktirajte. • Polž: 25 mm Hjdpfx Aex D Rcuehuenl • Obratovalna napetost: 400 V, 3-fazno, 50 Hz • Krmilna napetost: 230 V, 50 Hz; 24 V AC • Nazivni tok motorja: 80 A • Nazivni tok grelca: 58 A • Skupni nazivni tok: 138 A • Skupna priključna moč: 75 kW • Leto kalibracije: 2027 • Opcijsko: Geiger ravnanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 1.600 kN, skupna masa: 5.900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine comes equipped with a take-out robot and an enclosure with a FilterFanUnit that ensures clean operation. It is ideal for precision plastic processing and offers a mold height of 250 mm and a platen spacing of 825 mm. Contact us for further information about this machine. Additional Equipment Hnjdjx D E Dyopfx Ahuol • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Highlights: • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle, 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-driven with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Programmable, controlled nozzle contact pressure (1st injection unit) • Central 125 mm clamping platen set • Machine raised by 100 mm (elevated oscillation elements) • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mold • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby function • Sound pressure level: 70 dB(A) | ±3 Additional Information Screw diameter: 400 units: 35 / 40 / 45 mm Injection pressure (max.): 400: 2500 / 2000 / 1580 bar Shot weight (max. g PS): 400: 141 / 184 / 232 g Heating capacity 400: 9.7 kW | 5 zones Net machine weight: 400: 5900 kg

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements driven by servo motors, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking for a high-quality injection moulding machine, you should consider the Arburg 420A 1000-400, which we are offering for sale. Please contact us for more information about this machine. • Drive technology: • Electromechanical main movements via servo drives: dosing, injection, mould opening/closing, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine mounting platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal injection unit 400 • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing unit D25 mm, highly wear-/corrosion-resistant; open nozzle (220/25), flat nozzle tip (300/00), heating band (320/00) (Pos 060/25) • Heating band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-controlled, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mould height adjustment • Prepared for installation of a linear robot on the fixed platen • Tool protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blower unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, controlled and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) Hedpox D Hgvefx Ahujnl • Control, control cabinet, interfaces: • Selogica control system • Software packages (Pos 555: Advanced mechanical cycle control; Advanced movements; Production control; Optimization/operator assistance; Quality control; Documentation) • Temperature-controlled control cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mould temperature measurement zones (Pos 469/12) • Additional heating band for nozzle (Pos 468/01) • Interface for HB-Therm mould temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for colour dosing unit (Pos 493/00) Additional equipment • Programmable electric conveyor belt (Pos 412/02) • Sorting flap for separating good/reject parts (Pos 375/00)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 37.049 h, vpenjalna sila: 4.000 kN, skupna masa: 21.000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight of up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for high-precision plastic injection molding. Please contact us for further information on this machine. Clamping Unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / reinforced: 800 kN • Maximum opening stroke: 700 mm • Minimum mold height: 350 mm • Distance between platen faces (max.): 1050-1550 mm • Clear tie bar spacing: 820 × 820 mm Hnsdpfx Ajydpvbshujl • Mounting platen dimensions (W × H): 1171 × 1171 mm • Maximum mold half weight: 4500 kg • Maximum ejection force: 100 kN • Maximum ejector stroke: 250 mm Hydraulics / Drive / Miscellaneous • Hydraulic pump drive power: 55 kW • Total installed power: – 4000-2100: 88.9 kW – 4000-3200: 96.2 kW • Color: Plastic-coated frame (light gray / mint green / rapeseed yellow) • Control cabinets: Safety standard DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Power supply of injection unit: 1 × 16 A Injection Unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Backpressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating power: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heater: 1000 W | 1250 W Dimensions and Weights (Base Machine) • Clearance length: 490 mm • Electrical connection (fuse) motor + heater: 250 A • Electrical connection (fuse) motor: 125 A • Electrical connection (fuse) heater: 50 / 63 A Additional Equipment • SEPRO SR AXESS 30 S3 Robot (2008)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 68.463 h, premer vijaka: 35 mm, Ta Arburg 470 E 1000-700 je bila proizvedena leta 2011. Je robusten električni brizgalni stroj z zapiralno silo 100 ton in premerom polža 25 mm. Obratuje na 400V 3~, 50Hz in ima skupno priključno moč 78 kW ter je zasnovana za učinkovito delovanje. Izkoristite priložnost za nakup tega električnega brizgalnega stroja Arburg 470 E 1000-700. Za več informacij nas kontaktirajte. • Obratovalna napetost: 400 V, 3-fazno, 50 Hz • Krmilna napetost: 230 V, 50 Hz; 24 V AC • Nazivni tok motorja: 61 A • Nazivni tok gretja: 58 A • Skupni nazivni tok: 119 A • Skupna priključna moč: 78 kW • Kalibracija (leto): 2027 • Izbirna enota: da • Posamezna plošča: da • Razdalja med stebri: 470 x 470 Hsdpfx Ahox D Rndeuonl • Po želji: Geiger ravnanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, vpenjalna sila: 2.200 kN, premer vijaka: 70 mm, injekcijska masa: 172 g, Ta Arburg 570 S 2200-800/290 je bila izdelana leta 2020. Opremljena je s hidravličnim pogonskim sistemom in Selogica krmiljenjem za natančno delovanje. S zapiralno silo 2.200 kN in premerom polža 40 mm je idealna za natančne brizgalne naloge. Izkoristite priložnost in kupite to hidravlično brizgalno maso Arburg 570 S 2200-800/290. Kontaktirajte nas za dodatne informacije. Zapiralna enota • Razdalja med vodili: 570 × 570 mm • Hod odpiranja: 650 mm • Izmetalna sila: 70 kN • Izmetalni hod: 200 mm Hnsdox Nkp Iepfx Ahuol Brizgalna enota • Velikost brizgalne enote: 290 • Tlak brizganja: 2.500 bar • Volumen brizga: 188 cm³ Pogon in krmiljenje • Pogon: Hidravlični • Krmiljenje: ARBURG Selogica

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 13.361 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This Arburg 520S-1500-400 injection moulding machine was manufactured in 2016. It features a clamping force of 1600 kN, a 45 mm screw diameter, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances user-friendliness. Take advantage of this opportunity and purchase the hydraulic Arburg 520S-1500-400 injection moulding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced clamping program with 2 stages • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology Level 2: servo-controlled dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Hnsdsyg I Egopfx Ahusl Additional equipment • None included in the list • Robot/automation ready: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robotic system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, premer vijaka: 25 mm, Ta Arburg 470 S 800-170 je bila izdelana leta 2010. Gre za hidravlično brizgalno stiskalnico z zapiralno silo 80 ton in razdaljo med stebri 470x470 mm. Deluje na 400 V 3~ 50 Hz in ima skupno priključno moč 76 kW. Razmislite o nakupu te hidravlične brizgalne stiskalnice Arburg 470 S 800-170. Za več informacij nas kontaktirajte. • Razdalja med stebri: 470x470 mm Hnsdpfjx D R Epjx Ahujl • Enotna vpenjalna plošča: Da • Obratovalna napetost: 400 V 3~ 50 Hz • Krmilna napetost: 230 V ~ 50 Hz, 24 V DC • Nazivni tok motor/gretje: 76 / 59 A • Skupni nazivni tok: 135 A • Skupna priključna moč: 76 kW • Opcijsko: Geiger manipulacija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 5.000 kN, skupna masa: 26.400 kg, This 3-axis hydraulic injection moulding machine Arburg Allrounder 920S 5000-3200 was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range from 70 to 90 mm, and a maximum shot weight of up to 1,860 g. Take advantage of the opportunity to purchase this hydraulic injection moulding machine Arburg Allrounder 920S. Contact us for further information about this machine. • Maximum mould opening force: 150 kN • Increased opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mould height: min. 400 – max. 1,050 mm • Distance between platen faces: 1,300 – 1,950 mm • Tie bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Weight of moving platen (half): max. 8,000 kg Hnodpfxsydnigs Ahuol • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor output: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Total installed power: 96 kW • Colour: Structural Light Grey / Mint Green / Red-Yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameter: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticising capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Hold pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heater power: 6 × 5,500 + 4,300 W • Installed nozzle heater power: 1,100 W • Oil fill volume: 590 litres • Motor + heater fuse rating: 200 A • Motor fuse: 125 A • Heater fuse: 63 A

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, injekcijska masa: 132 g, skupna masa: 3.650 kg, Ta Arburg Allrounder 420C 1000-290 je bila izdelana leta 2014. Ima zapiralno silo 1000 kN, hod odpiranja 500 mm in vpenjalno površino 570x570 mm. Največja brizgalna masa je 132 g. Razmislite o možnosti nakupa tega hidravličnega stroja za brizganje Arburg Allrounder 420C 1000-290. Za več informacij nas kontaktirajte. • Hod odpiranja: 500 mm • Velikost vpenjalne plošče: 570 x 570 mm Hnedpfsyglrwex Ahuol • Maks. volumen: 144 cm³

Leto izdelave: 2008, obratovalne ure: 78.723 h, stanje: pripravljen za uporabo (rabljen), premer vijaka: 25 mm, Ta Arburg 470 A 800-170 je bila izdelana leta 2008. Gre za vertikalni stroj za brizganje plastike s zapiralno silo 80 ton, ki deluje na 400 V 3~, 50 Hz. Skupna priključna moč znaša 69 kVA. Razmislite o priložnosti za nakup tega vertikalnega stroja za brizganje plastike Arburg 470 A 800-170. Za več informacij nas kontaktirajte. • Obratovalna napetost: 400 V, 3~, 50 Hz • Krmilna napetost: 230 V, 50 Hz • Krmilna napetost: 24 V~ • Nazivni tok motorja/ogrevanja: 72 A / 58 A • Skupni nazivni tok: 130 A • Skupna priključna moč: 69 kVA • Kalibracija (leto): 2027 • Izbirna enota: da Hnodpfx Ajyq Rw Tjhuel • Enotna plošča: da • Razmak med stebri: 470 x 470 • Opcijsko: Geiger ravnanje

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, razmak između stupova: 470 mm, For sale is an injection moulding machine from the brand Arburg, model 470 C 1600-800. The pump and a control card have been removed from the machine, so it is being sold as defective. Other than that, the machine is in very good condition. Technical data: Pump hours: 61,400 Clamping force: 1,600 kN Clear tie bar spacing: 470 x 470 mm Ejector stroke: 225 mm Screw diameter: 50 mm Shot volume: 398 cm³ Dimensions: 4,335 x 1,635 x 1,950 mm Weight: 6,950 kg The machine is offered without peripherals. Transport and loading can be organised Europe-wide at additional cost upon request. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Hsdov Edriopfx Ahuenl Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 184686, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, razmak između stupova: 420 mm, delovna prostornina: 54 cm³, injekcijska masa: 45 g, For sale is an injection moulding machine from Arburg, model 420 C 1000-150/60. Hnsdpfxox E U Elo Ahuol The machine is in excellent and fully functional condition, very well maintained. The machine is offered without peripherals. Rotary table, material feed, temperature control units, and other accessories are not included. Technical specifications: - Year of manufacture: 2001 - Clamping force: - Clear tie bar spacing: 420 x 420 mm - Opening stroke: 500 mm - Minimum mould installation height: 250 mm - Platen size: 570 x 570 mm - Ejector stroke: 175 mm - Screw diameter: 25 mm - Theoretical shot volume: 54 cm³ - Shot weight: 45 g/PS Upon request, we can organise transport and loading throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 90.627 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 180 kN, premer vijaka: 18 mm, For sale is an injection moulding machine from Arburg, model 170U 180-70. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2004 Operating hours: 90,627 h Cylinder diameter: 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Internal pressure sensor Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Hedju Hqg Tepfx Ahusnl Inspection by appointment possible. Feel free to contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev Hjdjxirqqspfx Ahujnl NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran,

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 121.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 20 mm, For sale is an Arburg injection molding machine, model 320 C 500-100. The machine is in good condition and fully operational after installation. Technical data: Year of manufacture: 2002 Pump hours: 121,000 h Clamping force: 500 kN Ejector force: 35 kN Distance between mounting plates: 550 mm Clear tie bar spacing: 320x320 mm Mounting plate dimensions: 446x446 mm Screw diameter: 20 mm Calculated shot volume: 31 cm³ Transport and loading can be organized Europe-wide for an additional fee upon request. All prices are plus VAT. Hnedpfx Ahowqnhwsuol Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 55.806 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, skupna dolžina: 4.700 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 4.850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling unit, type Multi Select with X/Y/Z axes 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: - Year of manufacture: 2011 - Clamping force: 1500 kN - Tie bar distance: 470 x 470 mm - Mounting platen: 650 x 650 mm - Operating hours (pump): 55,806 h - Injection unit: Ø 45 / SP 400 - Shot volume: approx. 254 cm³ - Shot weight: approx. 232 g - Injection pressure: up to 1580 bar - Dimensions: approx. 4700 x 1700 x 2000 mm - Weight: 4850 kg Transport and loading can be organized Europe-wide upon request, at an additional cost. Hedpfsw E Itijx Ahuonl All prices plus VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, vpenjalna sila: 500 kN, premer vijaka: 25 mm, odmični hod: 350 mm, For sale is an Arburg injection moulding machine, type 320 S 500-150. The company from which this machine originates places great emphasis on maintenance. The machine's production order has been completed, and as no follow-up order was assigned, the machine was removed from production. The pump has a slight pressure loss but remains operational. Technical data: Year of manufacture: 2004 Clamping force: 500 kN Screw diameter: 25 mm Injection force: 35 kN Hedpfx Ahjkwcydeujnl Ejector force: 120 kN Opening stroke: 350 mm Distance between tie bars: 575 mm Min. mould height: 225 mm All prices plus VAT. Viewing possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 71.732 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 180 kN, premer vijaka: 25 mm, For sale is an injection molding machine from the brand Arburg, model 170 U 180-70. The machine is fully operational and ready for immediate use. Technical Data: Year of manufacture: 2003 Operating hours: 71,732 h Needle shut-off: Pneumatic Screw diameter: Ø 25 mm Clamping force: 180 kN Core pull function Internal pressure sensor Transport and loading can be organized across Europe upon request, for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Hnsdpfxeu Hqg He Ahuol Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 78.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 250 kN, premer vijaka: 18 mm, For sale is an injection molding machine from Arburg, model 270S 250-60. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2001 Operating hours: 78,000 h Screw diameter: 18 mm Clamping force: 250 kN Needle shut-off: Pneumatic Core puller: 1* Hydraulic Internal pressure sensor Transport and loading can be organized throughout Europe upon request and at an additional cost. Prices are plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Hedpfxsu Hqhqj Ahuenl Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or are you planning to sell your equipment? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 63.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 400 kN, premer vijaka: 25 mm, For sale is an injection molding machine from Arburg, model 270S 400-60. The machine is fully functional and ready for immediate use. Technical data: - Year of manufacture: 2005 - Operating hours: 63,000 h - Cylinder: Ø 25 - Clamping force: 400 kN - Core pull: 1x hydraulic - Internal pressure transducer Transport and loading can be organized throughout Europe for an additional charge upon request. Hnsdpfx Aju Hqh Rohuol Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINERY AND MUCH MORE. Do you need a high-quality yet affordable metal processing machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 55.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 350 kN, premer vijaka: 18 mm, For sale is an injection moulding machine from the brand Arburg, model 320S 350-60, complete with original Arburg handling system. The machine is fully operational and ready for immediate use. Technical data: Year of manufacture: 2004 Operating hours: 55,000 h Screw diameter: 18 mm Hnsdpsu Hqinefx Ahuol Clamping force: 350 kN Core pull: 1x hydraulic Needle shut-off: pneumatic Diverter valve Handling: Arburg Multilift H - Side extraction Incl. discharge conveyor belt Transport and loading can be organized Europe-wide for an additional charge upon request. Prices are plus VAT. Inspection available by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from Arburg, model 320S 350-60. The machine is fully functional and ready for immediate use. Technical data: - Year of manufacture: 2005 - Operating hours: 70,000 - Screw diameter: 25 mm - Clamping force: 350 kN - Needle shut-off: Pneumatic - Core pull: 1*Hydraulic - Cavity pressure sensor - Selector valve Transport and loading can be organised Europe-wide for an additional charge upon request. Prices are subject to VAT. Viewing by appointment is possible. Please contact us, our team will be pleased to assist you. Trade-in or exchange possible! Hodju Hqiujpfx Ahuonl Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Technical data: Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Hnsdpfx Ahou Uuakjuol Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.