Medium Xl-Plus Müllsammelaufbau, 2 Kammern nakup rabljenega (84.303)

Stanje: rabljeno, Leto izdelave: 2023, skupna dolžina: 3.650 mm, • 8x battery, 215-260Ah Tjdjxd Hx Sspfx Aqtob • 1x socket outlet in basket • Residual-current circuit breaker (RCD) • Generator • Built-in charger • Maximum ground pressure 14.0 kg/cm² • Travel speed – lowered 6.0 km/h • Turning radius – outside 2.60 m • Turning radius – inside 0.75 m • Gradeability 30% • Working height 12.65 m • Working outreach (standard platform) 6.05 m • Articulation height 7.12 m • Slewing (non-continuous rotation) 345° • Platform capacity 1,200 kg • Basket jib – total length 4.14 m • Basket jib – vertical working range 120° (+60° / −60°) • Rear access with sliding bolt • Fully proportional joystick for drive and lift operation with integrated rocker for thumb steering • 2 mini-joysticks enable proportional control for lifting and lowering mast and basket jib • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power socket in work basket • Large tool tray • Direct electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving mode when stationary • Function throttle-down in case of deep discharge • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective hoods • Motorized platform slew • High-performance steel-roller lifting mast, 345° rotatable • Chain slack detection • 3° tilt alarm with warning light • Frame width 1.20 m • Lifting and lashing eyes • Key-secured ground operation selector switch • Battery status indicator • Hour meter • Horn • Travel direction system • Harness anchor points • Xenon flashing beacon • Manual emergency lowering • Passive pothole protection • Tires (non-marking) 457 x 178 mm • Electrical system 48V DC • Deep-cycle batteries 4 x 48 V – 260 Ah • On-board battery charger, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A04B-0105-B133#BBH, potovalna razdalja osi X: 700 mm, pomik osi Y: 400 mm, pomik po osi Z: 330 mm, hitro pomikanje X-os: 54 m/min, hitri pomik os Y: 54 m/min, hitri pomik na osi Z: 54 m/min, širina mize: 850 mm, dolžina mize: 410 mm, obremenitev mize: 300 kg, skupna masa: 2.200 kg, največja hitrost vretena: 10.000 obr/min, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: 2x FANUC Robodrill α-D21MiB5 Plus – ready for immediate use We are offering two FANUC Robodrill α-D21MiB5 Plus machining centers in excellent condition. These machines combine high speed, precision, and reliability, making them ideal for both series production and flexible machining tasks. Tjdoxwiglspfx Aqtsb Both units have seen limited use, have been professionally maintained, and come equipped with valuable options that are normally available only at extra cost. Highlights & Equipment: - Year of manufacture: 03-2022 and 06-2022 - Large chip conveyor - High-pressure through-spindle coolant pump - Extraction unit - Dataserver via FTP - Fanuc Program Transfer Tool (software) - All tool holders as shown in the pictures - Manuals included - Always serviced by Humacs Krabbendam - Low operating hours These Robodrills are immediately operational and offer an excellent opportunity to invest in young machines with extensive options, without the lead time associated with new orders. The listed price is per machine. Interested? Please feel free to contact us for more information, specifications, or to arrange a viewing.

Stanje: rabljeno, prevoženi kilometri: 712.819 km, moč: 309 kW (420,12 KM), prva registracija: 08/2008, vrsta goriva: dizel, lastna masa: 9.175 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: rjava, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, število sedežev: 2, Oprema: ABS, spojka prikolice, Proizvajalec: Scania - Tip/Model: P420 - Zunanja lupina iz GFK (notranjost nerjavno jeklo) - 4 prekata (1956 / 1176 / 3000 / 3060) = 9.186 l prostornine rezervoarja - Nadgradnja rezervoarja GFK IZOLIRANA - Prva registracija: 28.08.2008 - Prevoženi kilometri: 712.819 km - Število osi: 2 - Emisijski razred: Euro5 - Kabina: M - Menjalnik: ročni - Vzmetenje: listno-zračno - Zavore: kolutne - Dolžina: 8010 mm - Širina: 2550 mm - Višina: 3030 mm - Lastna masa: 9175 kg - Material rezervoarja: nerjaveče jeklo - Skupna prostornina rezervoarja: 9186 l - Prekata rezervoarja: 4 - Izoliran - Oznaka sistema: samo z iztoki Tedpoxtuikefx Aqtjb

Stanje: rabljeno, lastna masa: 4.600 kg, največja dovoljena obremenitev: 13.390 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2000, dolžina tovornega prostora: 6.700 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, medosna razdalja: 5.130 mm, Leto izdelave: 2000, Višina: 1,12 m Todpfsw Srz Nex Aqtob Tehnično stanje: v redu Leto izdelave: 2000

Stanje: novo, Cutting diameter: 120 mm Cutting capacity at 90° (flat): 120 x 102 mm Cutting capacity at 90° (square): 112 x 112 mm Cutting capacity at 45° (flat): 78 x 78 mm Cutting capacity at 45° (round): 80.0 mm Cutting capacity at 60° (flat): 50 x 43 mm Cutting capacity at 60° (round): 50.0 mm Cutting speed: 35 – 80 m/min Saw blade length: 1440 x 13.0 x 0.65 mm Voltage: 230 V Motor power: 1300 Watt Weight: 18.0 kg Dimensions (L x W x H): 520 x 400 x 900 mm Portable metal bandsaw for cuts from 0° to 60° Dry cutting (no coolant) Up to 60% faster cutting compared to conventional bandsaws thanks to the NG system with reverse rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled blade tensioner for monitoring and adjusting correct blade tension - Steel vice with prism guide - Powerful 1300 W motor - "Constant Speed" variable speed control with current limiter - Sturdy, robust frame made from formed steel - Bow locking device for easy transport Included accessories: - Adjustable length stop, 500 mm Tsdoxaawtspfx Aqtsb - Detailed operating instructions & maintenance manual - Circuit diagrams and exploded drawings - Saw blade for pipes and profiles

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, Univerzalni laserski sistem za označevanje LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primeren za širok nabor različnih vrst označevanj. Z integriranim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trdi kovinski material, aluminij in plastika. Odvisno od zahtev je mogoče sistem opremiti z vlakenskim laserjem moči 20, 30 ali 50 W. Za trajno označevanje je uporaba laserja v mnogih panogah danes nujna. Z zmogljivo lasersko programsko opremo lahko ustvarjate besedila, številke, 2D-kode, QR-kode in logotipe brez obsežnega znanja programiranja, in to z le nekaj kliki. Programska oprema samodejno generira serijske in artikel številke po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (variabilne informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v predhodno določene območja. Uporaba ročnega skenerja je prav tako možna. Standardna oprema vključuje integriran osebni računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji je mogoče laserski model LAS 28 XLe opremiti z rotacijsko osjo (3-čeljustna vpenjalna glava) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranski nosilci za označevanje dolgih delov, premakljiva os Z, sistemi predalov itd. Izdelano v Nemčiji Vlakenski laser 30 W (po želji 20 W ali 50 W) • Razred laserja 1 • Valovna dolžina 1064 nm • Velikost območja označevanja 150 x 150 mm (po želji večje) • Signalna luč za prikaz delovnega stanja • po želji: rotacijska os (3-čeljustna vpenjalna glava) • po želji: sistem za odsesavanje (vključno z filtrom iz aktivnega oglja) Todpowlc Stofx Aqteb • po želji: digitalni sistem za merjenje višine • po želji: samodejni sistem za ostrenje za samodejno določanje razdalje do goriščne točke • Programska oprema za označevanje EZCAD v nemščini/angleščini (druga programska oprema na zahtevo) • Pilotni laser (enostaven predogled, predogled v čisti obliki) • Iskalnik goriščne točke (enostavna nastavitev goriščne točke) • maks. višina obdelovanca pribl. 300 mm • Električno nastavljiva os Z • Integriran osebni računalnik z operacijskim sistemom Windows • IPS PCAP zaslon na dotik in naslon za tipkovnico, nastavljiv po višini • Okvir iz aluminijastega profila • Hlajen s zrakom • Izjemno velik notranji prostor • Širina vrat pribl. 700 mm / višina vrat (prehod): pribl. 400 mm • Priključek 230 V • Dimenzije: pribl. 900 x 800 x 1900 mm (D x Š x V) z nosilcem za zaslon pribl. 1500 x 800 x 1900 mm (D x Š x V) • Teža: pribl. 120 kg

Stanje: novo, Leto izdelave: 2025, ∗JCB 403 Plus New Vehicle∗ - JCB Diesel by Kohler [36KW/49hp] - No AdBlue required - Lift height: 2.77m - Rated load capacity: 1,800kg - Hydrostatic drive - 20km/h - Comfort cabin (ROPS/FOPS) - Hydraulic quick coupler type Weidemann - Auxiliary hydraulics - Roof protection grid - Adjustable steering wheel - Fully opening doors - Heating - Additional rear counterweight 123kg Tedpfxeyfr I Ns Aqteb - Servo single-lever control - LED work lights front/rear - Yellow rotating beacon - Exterior mirrors right/left - Grease gun - Right armrest - Fork and bucket available Immediately ready for use, many more attachments in stock. Scheduling an appointment for viewing is expressly desired. Upon request, we can offer you a leasing or financing deal via Mercedes-Benz Bank. Mr. Mihm (Tel.) will be happy to assist you. More information can be found on our homepage. Errors and prior sale excepted. Quick coupler, road approval = Further information = Please contact Tobias Ebert for more information.

Stanje: rabljeno, Leto izdelave: 2019, Action package 1: Walterscheid wide-angle PTO shaft | Top attachment / Electrohydraulic control | Tank inner ring (straw ring) | Reduction gearbox / 1000 rpm with electrohydraulic control switch-over | Air-braked axle | 20 m³ / i-FeedGood L with 4 weighing bars Tedottv Imjpfx Aqtsb

Stanje: zelo dobro (rabljeno), trajanje garancije: 6 meseci, vrsta vhodnega toka: Klimatska naprava, temperatura okolja (min.): 16 °C, električna varovalka: 16 A, vhodni tok: 2 A, vhodna frekvenca: 50 Hz, okoljska temperatura (maks.): 35 °C, skupna dolžina: 2.500 mm, skupna širina: 754 mm, skupna masa: 400 kg, poraba energije: 12 kWh, Oprema: osvetlitev, zamrzovalnik, Fun Ice SRL este reprezentant AHT în România de peste 25 de ani. Revânzător AHT de echipamente noi și second-hand. Livrare rapidă, internațională. AHT Kinley 210/250 cm (poate fi utilizat ca congelator sau frigider, pentru temperaturi medii și joase)!!! Sistem complet și testat integral (bază + 2 rânduri de rafturi) Agent frigorific ECO R290 Pregătit pentru conectare, instalare facilă Todperhwuaefx Aqtsb Iluminare LED internă (LED în copertină și în uși) Unități disponibile aleator în stoc – AHT Kinley / Epta sau congelatoare superioare Carrier cu lungimi de 210 cm și 250 cm Pot fi combinate cu vitrinele AHT Miami sau Athen XL LED (aflate în stoc la Oradea, România) Toate echipamentele recondiționate din seria AHT EQ beneficiază de garanție 6 (șase) luni pentru piese de schimb, cu excepția consumabilelor și a materialelor de uzură (agent frigorific, garnituri, neoane etc.) Orice accesorii și piese de schimb disponibile pe stoc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, Cena velja samo za hladilnik/zamrzovalnik zgoraj AHT Kinley 210 ali Epta 210. Horizontalna vitrina AHT Miami ni vključena. Hitra dostava po vsem svetu Znotrajskupnostne fakture – brez DDV Tsdpjrhwvxofx Aqtsb AHT Kinley 210/250 cm (možnost uporabe kot zamrzovalnik ali hladilnik, srednje in nizke temperature)!!! Popolnoma preizkušen in popoln sistem (osnova + 2 vrsti polic) Ekološko hladilno sredstvo R290 Pripravljeno za priklop, enostavna montaža Notranja LED osvetlitev (osvetlitev z LED nadstreškom in vrat) Naključne enote na zalogi – zgornji zamrzovalniki AHT Kinley / Epta ali Carrier dolžine 210 cm in 250 cm Možna kombinacija z vitrinami AHT Miami ali Athen XL LED (na zalogi v Oradei, Romunija) Vsa obnovljena oprema serije AHT EQ ima 6-mesečno garancijo na dele, z izjemo potrošnega materiala in obrabnih delov (hladilno sredstvo, tesnila, neonske cevi ipd.) Vsi dodatki in rezervni deli na zalogi.

Stanje: rabljeno, prevoženi kilometri: 679.504 km, moč: 338 kW (459,55 KM), prva registracija: 06/2017, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, MAN TGX 18.460 4x2 * First Registration: 21.06.2017 * Mileage: 679,504 km * Engine Displacement: 12,419 ccm * Power: 338 kW * Automatic transmission * 2 beds * Auxiliary heater (parking heater) * Manual sliding roof * Radio * Heated seats * Cruise control * Automatic climate control * Differential lock * Adaptive cruise control * Lane departure warning * Collision warning system * Tires: Front 315/70 R 22.5, tread depth 12/12 mm * Rear: 315/70 R 22.5, tread depth 5/6/8/8 mm * All details without guarantee * More information and criteria on additional services * Repainting and retrofitting possible * Short-term license plates / Export plates available * Vehicle transfer and shipping possible * Assistance with customs and export documentation * Procurement of COC and EUR documents * In the market since 1991 * Leasing and financing available. We have been working with various leasing companies for many years and can therefore offer the best financing solution for each customer. We can often support customers with weak credit ratings and put them in touch with reliable leasing partners. * Own workshop * Polish, English, and Russian spoken * Repainting in your desired color is available in-house at a reasonable price and good quality. Tsdpfxspcdr No Aqtjb * If you are located further away and unable to visit or inspect a truck at our location, you are welcome to commission an independent expert of your choice to carry out a technical and visual inspection. Should any deficiencies arise, we can quickly and efficiently rectify them in our workshop. Additionally, for a surcharge, we can deliver your new used vehicle anywhere in Europe.

Stanje: rabljeno, Leto izdelave: 2016,

Stanje: rabljeno, prevoženi kilometri: 218.200 km, moč: 240 kW (326,31 KM), prva registracija: 02/2009, vrsta goriva: dizel, lastna masa: 14.950 kg, največja dovoljena obremenitev: 11.050 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 3.900 mm, zavore: stalna plinska ročica, barva: oranžna, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: zrak, število sedežev: 3, Oprema: ABS, dodatne luči, greljenje sedeža, kabina, klimatska naprava, nadzor oprijema, nizka raven hrupa, računalnik na krovu, servovolan, sistem za imobilizacijo, tempomat, Vehicle location: Bovenden, 1x comfort seat, double bench seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), raised exhaust, automatic transmission, lift + lower, beacon, air-suspended, low-noise G1, last axle hydraulically steered, side aluminum underrun protection, roof hatch, green environmental badge. Wheelbase: 3900 mm Body: Zöller Medium XL refuse collection body with Zöller Delta 2301 Premium lifter. Tjdpsvhkn Asfx Aqtob Front axle air-suspended, 7.5t front axle, rear axle H7 13t, crown wheel 300, axle load measuring device, Telligent trailing axle hydraulically steered, ABS, bus stop brake, disc brakes on front and rear axle, front underrun protection, additional stabilizer rear/trailing axle, lift/lowering device, start assist, parameterizable special module (PSM), onboard diagnostics 2, Allison 3200 P automatic transmission, engine brake with switchable constant throttle, lower radiator protection, rear engine PTO 600Nm. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Sealing of Bags: - Flat pouches. - Doypack pouches (stand-up pouches). Integration of Zippers: - Capability to seal all types of zipper closures. Todpjvdptcefx Aqtjb Advanced Finishing: - Punching of holes, handles, and easy-open features. - Rounded corners for aesthetic and safety purposes. Branson Ultrasonic Technology: - Ultrasonic sealing of zippers ensures precision and durability. Additional Equipment: - Built-in screw compressor (10 bar). - Chiller for the cooling station, ensuring efficient cooling of bottom and zipper seals. Technology and Modular Design: - The modular machine design allows adaptation to various film types, including laminated and co-extruded films, while maintaining high precision and process repeatability. - Servo technology provides excellent control of tension and sealing time, resulting in outstanding product quality and consistency. Pouch Types Produced with the Vegaplus Pouch System: - Three-side sealed bags. - Zipper bags. - Doypack pouches (stand-up pouches) made from a single film or with a separately inserted bottom gusset. - Retort pouches with rounded corners (without notch). - Side-gusset pouches with zippers.

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 00399, LT Industries – Quantum 1200 Plus, model cu multiplexor pe 20 de canale • Analizoare de proces pentru mai multe constituenți, în timp real • Capacitate de multiplexare pe fibră optică, cu mai multe puncte de prelevare • Fără șocuri și vibrații Seria de analizoare de proces LT Industries Quantum 1200 este compusă din sistemele robuste și cu scanare rapidă Quantum 2000 și 1200, dezvoltate pentru utilizarea în instalații pilot, dar și pentru aplicații dedicate, de sine stătătoare, în controlul automatizat al proceselor de producție. Utilizând o tehnologie fiabilă și testată, sistemele LT Industries îmbunătățesc controlul calității, cresc randamentul și reduc pierderile prin furnizarea de analize în timp real. Procesul de prelevare a probelor este nedistructiv și ne-invaziv, fără a necesita pregătirea suplimentară a probei, așa cum se întâmplă la alte tehnologii de testare. Analizoarele de proces Quantum 1200 de la LT Industries oferă analize multiple și continue, în timp real. Aceste analize s-au dovedit a fi la fel de precise ca testarea de laborator tradițională pentru lichide, pulberi, solide, suspensii, paste, emulsii și/sau suspensii. Aceste sisteme furnizează date instantanee, care au consacrat LT Industries ca lider în măsurarea proceselor cu NIR (spectroscopie în infraroșu apropiat) dedicată controlului proceselor. Artisan Scientific Corporation dba Artisan Technology Group nu este afiliată sau distribuitor pentru LT Industries. Menționarea, prezentarea sau vânzarea produselor care poartă denumiri, mărci comerciale, branduri și logouri sunt doar în scopuri de identificare și/sau referință și nu implică vreo afiliere sau autorizare din partea titularilor drepturilor. Seria Quantum 1200 de analizoare de proces combină puterea analitică și inteligența cu simplitatea operării într-un pachet sistem integrat. Un fascicul de lumină monocolor, pre-dispersat, trece prin mecanismul patentat con cu reductor armonic, unde este separat în lungimi de undă distincte și direcționat printr-un canal de fibră optică pentru a ilumina proba. Lumină transmisă înapoi prin fibra optică este transformată în semnal electric, care este comparat de microprocesor cu răspunsurile calibrate din memoria sistemului. Rezultatele acestei comparații sunt furnizate ca date de ieșire pentru controlul procesului. Tsdpfx Aqjg Tdwvotjb Notă importantă: Alte accesorii, manuale, cabluri, date de calibrare, software etc. nu sunt incluse cu acest echipament. Condiție de livrare, FCA: Oradea/România Putem livra/exporta oriunde în lume. Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. Vorbind limbi: Engleză, Germană, Maghiară, Franceză, Română.

Stanje: rabljeno, Metal band saw blade, band saw blade, metal saw band Tjdpfxogrvfks Aqtob - Manufacturer: Wespa, unused Bitec M42 Plus metal saw band - Dimensions: 2450x27x0.90 mm 4/6 - Quantity: 7 blades available - Price: per piece - Weight: 0.5 kg/piece

Stanje: novo, PILOUS Double Miter Bandsaw ARG 260 plus H with automatic hydraulic lifting of the saw frame Including special accessories: Powered chip brush, band tension indicator Roller conveyor D 300 / 3m with manual measuring system Roller conveyor D 300 / 3m Cutting range: Round: 90° -45° +45° +60° in mm: 260-175-200-125 Square: 90° -45° +45° +60° in mm: 255-145-185-120 Rectangle: 90° -45° +45° +60° in mm: 300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Hydraulic power unit motor 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min Saw band length 2880 x 27 x 0.9 mm Todpoilqbuefx Aqtsb Working height from vise 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 Part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Machine weight 490 kg

Stanje: novo, Leto izdelave: 2025, Model 2025 – Ready for Industry 4.0! Laser Marking System for: → Marking → Annealing of metals → Marking a wide range of materials → Deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (variable pulse width available). Simple operation and handling! Our exclusive XL laser marking system features: • Professional fiber laser source: JPT MOPAfix, 20W or 30W output • 1064nm, 20-400 kHz (ideal for perfect annealing marks) • "New Generation ECO" scanner unit • 19" PC control – no external card required • Extra-large viewing window with certified laser safety glass • Scan area approx. 150 x 150 mm • Motorized height adjustment • Full enclosure with 4 castors • "Weightless" lift-up door for safe marking EZCAD III Software: • Barcode and QR code support • Serial numbering function • Batch scanning from Excel file • Laser parameter finder using 2-parameter matrix • TCP/IP connectivity for external components • Industry 4.0: System status processing at any time via TCP/IP protocol • I/O ports for direct communication • New look and feel with fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Up to 50% performance boost with 64-bit architecture • Improved stability with integrated control board • Optionally control up to 4 axes (integrated) • Optional deep engraving with Z axis • Enhanced algorithms for rapid hatching • Completely redesigned Galvo generation • Dual laser pointer to check focus position • LED illumination of the marking area • Connection ports for external extraction systems • Start button and emergency stop (E-Stop) on the housing Tedpfsd Athmox Aqtob • USB and network connectivity for data access • Operating manual and control software in German • Protective enclosure, Laser Class 1 compliant • Includes 4 hours training at our training center (max. 2 persons) Need a tailored solution? No problem. Choose from our extensive range of accessories: → Camera systems for object recognition → Fiber laser sources in almost any configuration → Motorized and automatic height adjustment → Scanlab equipment → Automation options for component handling → Conveyors for infeed and outfeed → 3D marking and engraving capability → Automatic focus adjustment → Rotary unit → Motorized slides → Interlock system for marking without full enclosure, using only personal protective equipment (PPE) for oversized workpieces Our engraving lasers can be customized to your specifications for both design and size! → Made in Schweinfurt! Images may show optional equipment! Laser engraving machine, laser marker, laser marking, laser marking system, laser engraving system, laser engraving equipment, laser marking equipment, laser engraving, laser marking, laser engraving unit, laser marking unit, marker laser, marking laser, Markierheld

Stanje: novo, Pressure: 220Bending length: 3020Frame gap: 2550Clear height: 600Stroke length (max.): 350Throat depth: 450Dimensions (LxWxH): 3745x2290x3055Approx. weight: 11,2504 axes (Y1, Y2, X, R): Yes, all axes controlled via Delem DA 66 (2D graphical control)CNC crowning via control: Yes, through the Delem DA 66 CNC controller (2D graphical control)Motor power: 22Technical specificationsXL 30220UnitBending length: 3020 mmBending force: 220 tLowering speed: 140 mm/sBending speed: 10 mm/sReturn speed: 130 mm/sStroke: 350 mmClear installation height / daylight (E): 600 mmThroat depth (D): 450 mmGap between frames (B): 2555 mmMachine length (L): 3745 mmMachine width (W): 2290 mmWidth without front stop (Y): 1720 mmMaximum height: 3055 mmMain motor: 22 kWOil tank capacity: 300 lMachine weight: 11,800 kg Model: KK Kletzer EUROPA XL The robust EUROPA XL press brake stands out thanks to its high precision, accuracy, and versatile application options. The EUROPA XL offers a very large clear height and, as a result, a long stroke (ram travel). The throat depth is also above average, providing maximum flexibility with minimal limitations. We focus on quality, reflected in the machine’s control system. As a standard controller, we use the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes via the controller. Naturally, CNC crowning is also integrated via the Esa S640 (2D graphical control). We make no compromises on the upper tooling and die either, equipping the KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Of course, every machine is only as good as its service support. For this reason, we put a strong emphasis on highly qualified personnel with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with double linear guides and ball screw Motorized crowning system with CNC control Heavy-duty design, height adjustment via handwheel; from 175 t up, heavy version on linear guide Laser protection system on upper beam CE safety equipment Tsdpfxsd Edhlo Aqtsb Various options available Other controllers: ESA 640 2D 15" touchscreen control                                                        ¤ 4,520,-- incl. ESA 675 W 3D 21" touchscreen control (Windows based)                       ¤ 6,485,-- DELEM 66 T 2D 17" touchscreen control (Windows based)                    ¤ 10,165,-- DELEM 69 T 3D 17" touchscreen control (Windows based)                    ¤ 16,350,-- KK-Industries GmbH There is something for everyone!

Stanje: novo, Pressure: 220 Bending length: 6050 mm Frame width: 5100 mm Installation height: 600 mm Stroke length (max.): 350 mm Throat depth: 450 mm Dimensions (LxWxH): 6775 x 2650 x 3250 mm Approx. weight: 18,000 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 controller (2D graphical control) CNC crowning via control: Yes, through CNC crowning system, Esa S630 (2D graphical control) Motor power: 22 kW Technical Specifications XL 60220 | Parameter | Value | |-----|-----| | Bending length | 6050 mm | | Bending force | 220 t | | Downstroke speed | 100 mm/s | | Bending speed | 10 mm/s | | Return speed | 100 mm/s | | Stroke | 350 mm | | Installation/clear height (E) | 600 mm | | Throat depth (D) | 450 mm | | Frame width (B) | 5100 mm | | Machine length (L) | 6825 mm | | Machine width (W) | 2300 mm | | Width without front gauge (Y) | 1760 mm | | Maximum height | 3010 mm | | Main motor | 22 kW | | Hydraulic tank capacity | 300 l | | Machine weight | 19,000 kg | Todpfjd Ehh Uox Aqtob The robust EUROPA XL press brake is characterized by its high precision, accuracy, and versatile applications. The Europa XL features a large installation height, allowing for a long stroke (cylinder travel). The throat depth is also above average, minimizing limitations during operation. We emphasize quality, which is also reflected in the controller. As standard, we equip the machine with the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is outfitted with CNC axes Y1, Y2, X, and R, all managed via the control system. Of course, CNC crowning with Esa S640 (2D graphical control) is included. There are no compromises regarding the upper tool and die; the KKI EUROPA XL press brake is equipped with premium tooling from EUROSTAMP Italy. Naturally, every machine is only as good as its after-sales service. That’s why we place our emphasis on highly qualified staff with long-standing experience in the CNC sheet metal processing sector. - CNC axes Y1, Y2, X, and R - Esa S640 (2D graphical control) - Back gauge with double linear guide and ball screw - Motorized CNC-controlled crowning device - Heavy-duty version with height adjustment by handwheel; from 175 to heavy-duty on linear guide - Laser safety device on upper beam - CE protective equipment - Various options available Additional controllers: - ESA 640 2D 15'' touchscreen control: €4,520 (incl.) - ESA 675 W 3D 21'' touchscreen control (Windows base): €6,485 - DELEM 66 T 2D 17'' touchscreen control (Windows base): €10,165 - DELEM 69 T 3D 17'' touchscreen control (Windows base): €16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Pressure: 220 Bending Length: 4050 mm Frame Gap: 3550 mm Installation Height: 600 mm Stroke Length (max.): 350 mm Throat Depth: 450 mm Dimensions (LxWxH): 4740 x 2290 x 3050 mm Approx. Weight: 13,350 kg 4 Axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphical control) CNC crowning via control: Yes, via Esa S630 (2D graphical control) Motor Power: 22 kW Technical Specifications Model: XL 40220 Unit Bending length: 4050 mm Bending force: 220 t Approach speed: 140 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation/Daylight Height (E): 600 mm Throat Depth (D): 450 mm Frame gap (B): 3550 mm Machine Length (L): 4740 mm Machine Width (W): 2290 mm Width without front gauge (Y): 1730 mm Max. Height: 3050 mm Main Motor: 22 kW Hydraulic Tank Volume: 300 l Machine Weight: 13,200 kg Model KKI EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities. The Europa XL features a very large installation height and, as a result, a long stroke (cylinder travel). The throat depth is also exceptionally large to minimize restrictions. We focus on quality, which is also reflected in the control system. As a standard, we provide the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R via the control system. CNC crowning via Esa S640 (2D graphical control) is, of course, also included. With the top and bottom tooling, we make no compromises: the KKI EUROPA XL CNC press brake comes equipped with premium tools from EUROSTAMP Italy. Naturally, every machine is only as good as its service. For this reason, we place great importance on highly qualified personnel with many years of experience in CNC sheet metal processing. CNC Axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with twin linear guides and ball screw Powered crowning device with CNC control Heavy-duty height adjustment via handwheel; heavy-duty linear guides from 175 t onwards Laser protection system on the upper beam CE-certified safety equipment Various options available Other Control Systems Available: ESA 640 2D 15'' touchscreen control — €4,520 incl. ESA 675 W 3D 21'' touchscreen control (Windows base) — €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows base) — €10,165 Tjdpod Ehicofx Aqtob DELEM 69 T 3D 17'' touchscreen control (Windows base) — €16,350 KK-Industries GmbH There’s something for everyone!

Stanje: novo, Pressure: 135 Bending length: 3020 mm Frame width: 2555 mm Installation height: 550 mm Max. stroke length: 320 mm Throat depth: 450 mm Dimensions (LxWxH): 3745x2250x2835 mm Weight approx.: 9300 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic controller) CNC crowning via controller: Yes, via Esa S630 (2D graphic controller) Motor power: 15 kW Technical Specifications XL 30135 Unit Bending length: 3020 mm Bending force: 135 t Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation / clear height (E): 550 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front stop (Y): 1720 mm Maximum height: 2835 mm Main motor: 15 kW Oil tank volume: 190 l Machine weight: 9600 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. EUROPA XL offers an exceptionally large installation height and, as a result, a generous cylinder stroke. Likewise, the throat depth is above average to ensure minimal restriction. We focus on quality, which is also reflected in the controller. As standard, our high-quality Esa S640 (2D graphic controller) is included. Furthermore, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. Naturally, CNC crowning with the Esa S640 (2D graphic controller) is also included. We make no compromises on the top tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service, which is why we place a strong emphasis on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic controller) Backgauge with double linear guide and ball screw spindle Motorized crowning device with CNC control 2 heavy-duty front support arms with height adjustment via handwheel; heavy-duty linear guide version from 175 tons upward Laser safety device on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller – €4,520 incl. ESA 675 W 3D 21'' touchscreen controller (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen controller (Windows-based) – €16,350 Tjdpfx Ajd Ehinsqtjb KK-Industries GmbH Something for everyone!

Stanje: novo, Leto izdelave: 2025, Laser power: 30,000 watts Laser working area: 6,000 x 2,500 x 270 mm Positioning speed X/Y/Z: 200 m/min Simultaneous speed: 280 m/min Max. workpiece weight: 5,500 kg Max. mild steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 16,300 mm Width: 4,150 mm Height: 2,620 mm Machine weight: 25,800 kg Standard equipment - Hydraulic shuttle table - Fiber source: Raycus - Cutting head: DNE by Power - Linear guide: Rexroth Tjdpfswcl Ufsx Aqtjb - Rack and pinion: Herion M3 / Güdel - Planetary gearbox: Neugart - Servo drives: Yaskawa - PLC hardware: Schneider

Stanje: novo, Leto izdelave: 2025, Markierheld EXCLUSIVE XL Industry 4.0 – Model 2025 Metals – plastics and much more! • EZCAD 3 (true 64bit card) supporting up to 4 axes • Compatible with Windows Professional 64bit • Professional MOPA fiber laser source JPT with 20 watts of power and up to 600 kHz (optional with variable pulse width and up to 2000 kHz for color annealing marking) • Scanner unit “DigiScan Eco 10” for high fidelity and precision • T-slot plate from Isel for easy workpiece fastening and positioning • Front sliding door with large viewing window and certified laser protection glass made in Germany, including monitoring -> Door opening 450 mm • Left side sliding door with monitoring for long parts -> Door opening 400 mm • Clearly arranged control panel with Siemens push buttons • Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) • Motorized height adjustment with focus finder • Freestanding housing made of aluminum profiles with two manual doors for simple, user-friendly, and safe marking Laser Class 1 • Underbody of the freestanding housing with Rittal control cabinet and integrated extraction station • LED workspace lighting made in Germany • High-performance mini PC with 32 GB • 21" TFT touch screen for fatigue-free work • Professional marking software in German Tedpjwgaqpsfx Aqtob • Barcode and QR code support • Serial number function • Batch scanning from Excel file, network, or database! • Laser parameter finder via matrix across 2 parameters (e.g., frequency to speed, frequency to power) • TCP IP connectivity: various commands can now be transmitted to the software via TCP protocol. This enables simple integration of external components such as camera position detection, etc. • Industry 4.0: The system status can be processed anytime via the TCP/IP protocol • Inputs and outputs for automation • 3D preview for rotary axis processing • Up to 50% performance increase thanks to 64-bit technology • Improved stability • Optionally control up to 4 axes WITHOUT switching via plugins • Optional DEEP engraving (slicer software with Z-axis control) • Increased engraving speed for hatching through new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position check • Connection option for external extraction • Software suitable for Windows 10 • USB cable for PC connection • Operating manual and control software in German As options, we also offer: ⇒ IPG or SPI fiber laser sources in various output powers ⇒ Scanlab equipment ⇒ Suitable extraction systems ⇒ Automation for loading, conveyor belts, and more! ⇒ 3D marking function ⇒ Automatic focus adjustment via special laser sensor ⇒ Rotary unit in various designs ⇒ Motorized X and Y slides ⇒ Interlock system for marking WITHOUT safety enclosure—just with personal protective equipment for bulky parts Training in Schweinfurt included! Our engraving lasers are manufactured in our own factory in Schweinfurt! Therefore, individual customizations are possible at any time! ⇒ Made in Schweinfurt! Images may contain options! We are your partner for laser marking systems. Whether manual or automatic laser marking systems, we are happy to provide you with a quotation.

Stanje: novo, Leto izdelave: 2025, Markierheld EXCLUSIVE XL Industry 4.0 – Model 2025 Metals, plastics, and much more! Tedpfxewga Ets Aqtjb • EZCAD 3 (true 64-bit card) with up to 4 axes • Suitable for Windows Professional 64-bit • Professional JPT MOPA fiber laser source with 20 watts power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color annealing marking) • DigiScan Eco 10 scanner unit for high accuracy and detail • T-slot plate by Isel for easy clamping and positioning of your workpiece • Front sliding door with large viewing window and certified laser safety glass made in Germany, including monitoring system -> Door opening: 450 mm • Left-side sliding door including monitoring for long parts -> Door opening: 400 mm • Clear control panel with Siemens pushbuttons • Marking area approx. 100 x 100 mm (optional 150/200/300 mm) • Motorized height adjustment with focus finder • Free-standing housing made of aluminum profiles with two manual doors for simple, user-friendly, and safe marking. Laser Class 1 • Base of the housing with Rittal control cabinet and integrated exhaust mounting area • LED work area lighting made in Germany • High-performance mini PC with 32 GB RAM • 21” TFT touch screen for fatigue-free operation • Professional marking software in German • Barcode and QR-code support • Serial number function • Batch scanning from Excel file, network, or database! • Laser parameter finder using matrix over two parameters (e.g., frequency to speed, frequency to power) • TCP/IP connectivity. Various commands can now be sent to the software via the TCP protocol. This allows seamless integration of external components such as camera position recognition, etc. • Industry 4.0: Machine status can be processed anytime via TCP/IP protocol • Inputs and outputs for automation • 3D preview for rotary axis processing • Performance boost up to 50% thanks to 64-bit technology • Enhanced stability • Optionally control up to 4 axes WITHOUT switching via PLUG-ins • Optional DEEP engraving (slicer software for Z-axis control) • Increased engraving speed for hatchings due to new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position check • Connection port for external extraction system • Software compatible with Windows 10 • USB cable for computer connection • Operating manual and user software in German Available options include: → IPG or SPI fiber laser sources with various power levels → Scanlab equipment → Suitable extraction systems → Automation for part loading, conveyor belts, and much more! → 3D marking functionality → Automatic focus adjustment via specialized laser sensor → Rotary unit in various designs → Motorized slides in X and Y axes → Interlock system for marking WITHOUT safety housing, using only personal protective equipment for bulky parts Training included in Schweinfurt! Our engraving lasers are manufactured at our facility in Schweinfurt! Custom requirements can be accommodated at any time! → Made in Schweinfurt Photos may show optional features. We are your partner for laser markers—whether manual or automated laser marking systems. We would be happy to provide you with a quote.