Xerox Produkcijski Tiskalnik nakup rabljenega (691)

Stanje: rabljeno, V tej ponudbi kupujete rabljeni broširni obrezovalnik "Plockmatic RCT II". Predmet prodaje: 1 x Plockmatic Trimmer RCT 2.0 Rotacija, biganje in dvostransko obrezovanje Za različne modele Xerox Število brošur: Skupaj: Približno 987 brošur Gedeqyb U Sjpfx Afwoub Stanje: Gre za rabljeno napravo, ki lahko kaže znake uporabe (manjše praske ali porumenelost). Naprava je preizkušena za delovanje Pakiranje in dostava: Napravo si lahko ogledate v času našega delovnega časa. Za ogled se prosimo predhodno dogovorite! Pomorska embalaža in svetovna dostava sta na voljo po dogovoru! Za dodatne informacije nas lahko tudi osebno kontaktirate.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A7X5021000012, število kartuš s črnilom: 4, barvni kanali: CMYK, loèitev (maks.): 600 DPI (pik na palec), potrebna širina: 330 mm, odčitek števec (barva): 503.000, Naprodaj: barvni tiskalnik za etikete Konica Minolta C71cf roll-to-roll v dobrem stanju. Tiska na različne materiale: vellum, premazni papir, PP, PE, papir za vinske etikete in PVC. Tiskalnik ima natisnjenih samo približno 500 km. Trenutno priključen in delujoč. Ponujamo lahko tudi zaključne stroje: Scorpio Plus SCR35PI ali Vorey VD320. Gsdjxuid Sspfx Afwsub

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, število kartuš s črnilom: 7, barvni kanali: 7, število tiskalnih glav: 7, loèitev (maks.): 1.200 DPI (pik na palec), širina papirja (maks.): 1.600 mm, skupna dolžina: 2.600 mm, skupna širina: 800 mm, skupna višina: 1.360 mm, zahteva za prostor dolžina: 2.700 mm, potrebna širina: 1.300 mm, potrebna višina: 1.360 mm, vrsta vhodnega toka: Enosmerni tok, vhodni tok: 16 A, vhodna napetost: 220 V, Oprema: dokumentacija / priročnik, Stroj je bil kupljen nov pri Mirage Group, tiskal je in še vedno tiska izključno z originalnimi črnili in potrošnim materialom. Vse zamenjane dele so zamenjali z originalnimi rezervnimi deli. Stroj si je možno ogledati in preizkusiti vsak dan. Je v odličnem tehničnem in vizualnem stanju. Na njem je bilo natisnjenih 24.406,34 m² folije. Godpfsyy A Uqsx Afwsub

Stanje: generalkompletno obnovljen (rabljeno), For sale: EOS P730 – Guaranteed operational condition This EOS P730 has been thoroughly cleaned and refurbished by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Synrad 48-5 CO2 lasers, this high-end system is engineered for demanding SLS production environments. Available accessories: We offer a variety of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P Gjdpfx Aeq E I Anjfwsub • Unpacking station • Build frames Upgrade options: Take your EOS P730 to the next level with available upgrades such as: • Coherent C70 laser upgrade for improved performance • Laser window upgrade for increased efficiency • And more! Contact us for further details. Materials spotlight: We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers outstanding performance at a fraction of OEM powder costs, allowing you to reduce your production expenses without compromising quality. Included services: • Transport & installation: Secure delivery in original EOS crate and professional installation services. • Warranty & maintenance plans: Flexible options available to meet your requirements. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS systems and offer comprehensive support. As the only provider delivering a complete solution for pre-owned EOS equipment, we offer unmatched expertise and dependability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by skilled ex-EOS technicians. • Exclusive materials: Cost-effective consumables such as our plug-and-play PA12, fully tested and optimized for EOS systems. • End-to-end support: From logistics to tailor-made maintenance plans, we manage every detail. Choose IM3D for reliable machines, premium materials, and the technical know-how to maximize your SLS production. Contact us today for more information or specific inquiries!

Stanje: generalkompletno obnovljen (rabljeno), For Sale: Refurbished EOS M100 – Ready for Immediate Use Gusdpswt Dhrjfx Afwsb This fully inspected and refurbished EOS M100 is in excellent condition! The system is ready for instant operation and is ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: Upon request • Build Volume: 100 x 100 x 95 mm • Laser Type: Yb-fiber laser; 1 x 200 W Consumables Highlight We offer plug-and-play materials, thoroughly tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is engineered to perform at or above OEM powder levels, while delivering significant cost savings. By switching to our materials, you lower your production costs without sacrificing quality. Included Services: • Transport & Installation: We ensure secure delivery in the original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your needs, ensuring long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality refurbished EOS SLS and DMLS machines with extensive support services. We are the only provider offering end-to-end solutions for pre-owned EOS equipment, with unmatched expertise and reliability. What we offer: • Expert Maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive Materials: Cost-efficient, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unrivalled Support: From transport to maintenance plans, we handle it all. Rely on IM3D for top performance, superior materials, and the expertise to keep your SLS and DMLS production running smoothly. Feel free to contact us for more information or with any questions!

Stanje: skoraj kot novo (rabljeno), For Sale: Complete EOS P110 Setup – Ready for Immediate Use This fully inspected and refurbished EOS P110 is in excellent condition, as seen in the pictures—it looks practically new! The setup is ready for immediate use and is ideal for expanding or starting an SLS production line. Included in the package: • 2 build frames • Set of hoppers • Unpacking station with sieve • Material mixer Specifications: • Technology: SLS (Selective Laser Sintering) • Material type: Polymer • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Coherent CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 has been developed to perform at or above the level of OEM powders, while providing significant cost savings. By switching to our materials, you can reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your needs, for long-term reliability and peace of mind. Gsdpfjryvilox Afweub About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality refurbished EOS SLS machines with comprehensive support services. We are the only provider offering end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transport to maintenance plans, we take care of everything. Rely on IM3D for top performance, superior materials, and the expertise to keep your SLS production running smoothly. Feel free to contact us for more information or any questions!

Stanje: generalkompletno obnovljen (rabljeno), For sale: EOS P760 – Guaranteed operational condition This EOS P760 has been fully cleaned and refurbished by Inframotion 3D (IM3D) to ensure optimal performance. Equipped with 2x Coherent C70 CO2 lasers from the P770, this high-end machine is designed for demanding SLS production environments. With this unit, you can expect print quality comparable to the P770. The P770 is only faster. Available accessories: We offer a range of optional accessories to enhance your setup, including: • Docking station • Transitube • IPCM P • Unpacking station • Build frames We supply plug-and-play materials, fully tested and optimized for EOS systems. Our Inframotion PA12 delivers excellent performance at a fraction of the cost of OEM powders, letting you reduce production costs without compromising quality. Included services: • Transport & installation: Safe delivery in original EOS packaging and professional installation services. • Warranty & maintenance plans: Flexible options available to suit your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and offer comprehensive support. As the only provider delivering a complete solution for pre-owned EOS equipment, we offer unparalleled expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades by skilled former EOS technicians. • Exclusive materials: Cost-effective consumables such as our plug-and-play PA12, thoroughly tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we take care of every detail. Choose IM3D for reliable machinery, premium materials, and the expertise to maximize your SLS production. Godpfxjv Dxw Dj Afwoub Contact us today for more information or specific inquiries!

Stanje: generalkompletno obnovljen (rabljeno), For Sale: Refurbished EOS M290 – Ready for Immediate Use This fully inspected and refurbished EOS M290 is in excellent condition! The system is immediately ready for operation and is perfect for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material type: Metal • Compatible materials: upon request Gedpfjwmq Dyex Afweub • Build volume: 250 x 250 x 325 mm • Laser type: Yb-fiber laser; 1 x 400 W Consumables Highlight We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is engineered to perform at or above OEM powder standards while delivering significant cost savings. Switching to our materials reduces your production costs without compromising quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your needs, ensuring long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality refurbished EOS SLS and DMLS machines with comprehensive support services. We are the only provider offering end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. Our Offerings: • Expert Maintenance: Installation, servicing, repairs, and upgrades performed by experienced former EOS technicians. • Exclusive Materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, uniquely tailored for EOS systems. • Unrivalled Support: From logistics to maintenance plans, we manage everything for you. Count on IM3D for top performance, superior materials, and the expertise to keep your SLS and DMLS production running smoothly. Feel free to contact us for more information or enquiries!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Te koop: EOS P 396 – Gegarandeerd Werkende Staat Deze EOS P 396 is in 2020 door de vorige eigenaar rechtstreeks bij EOS aangekocht en is nu beschikbaar voor wederverkoop in volledig gegarandeerd werkende staat. Voor levering wordt de machine grondig geïnspecteerd en gereviseerd door onze ervaren technici, om optimale prestaties te waarborgen. Het pakket omvat: • 2 bouwframes • Hydac waterkoeler Extra accessoires zijn op aanvraag beschikbaar. Wij verzorgen het transport in de originele EOS-verpakking en bieden professionele installatieservice voor een zorgeloze ervaring. Garantie- en onderhoudscontracten zijn beschikbaar naar uw wensen. Guodpfx Ajtp Up Eofwjb Voor meer informatie of specifieke verzoeken kunt u altijd contact met ons opnemen. Over Inframotion 3D (IM3D) Bij Inframotion 3D B.V. zijn wij gespecialiseerd in de levering van hoogwaardige, gereviseerde EOS SLS-machines en ongeëvenaarde technische ondersteuning. Met ons team van voormalige EOS-technici zijn wij de enige aanbieder op de markt die een totaaloplossing biedt voor gebruikte EOS-apparatuur—including installatie, onderhoud, reparaties, upgrades en verbruiksartikelen. Wat ons onderscheidt: • Gegarandeerde betrouwbaarheid: Elke machine wordt vóór levering geïnspecteerd en gereviseerd. • Complete ontzorging: Van transport en installatie tot onderhoudscontracten op maat—wij regelen het voor u. • Expertise: Dankzij jarenlange ervaring in de SLS-industrie garanderen wij dat uw machine optimaal presteert. • Exclusieve oplossingen: Unieke materialen, accessoires en servicecontracten ontworpen voor EOS-gebruikers. Kies voor IM3D voor ongeëvenaarde expertise, waarde en service. Neem gerust contact met ons op voor meer informatie over hoe wij uw SLS-productiebehoeften kunnen ondersteunen!

Stanje: rabljeno, Ponudba centralno bobnaste fleksotiskarske naprave FLEXOTECNICA NG10 iz leta 2009 in širine 1280 mm. Gjdpfx Afsy Sfcnsweub

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: EVO-lizer A4, Leto izdelave: 2015, obratovalne ure: 4.413 h, skupna dolžina: 720 mm, skupna višina: 720 mm, skupna širina: 540 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 64 kg, vhodna napetost: 230 V, vhodni tok: 4 A, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, natančnost pozicioniranja: 0,05 mm, širina mize: 270 mm, kapaciteta rezervoarja: 11 l, dolžina mize: 195 mm, raven hrupa: 46 dB, število tiskalnih glav: 2, Rabljeni FDM 3D-tiskalnik EVO-lizer A4 Podatki o napravi: Dimenzije tiskalnika (Š x G x V)……………..540 x 720 x 710 mm Teža……………..…….64 kg Priključni podatki……………..……230 VAC; 50/60 Hz; 4A Temperatura okolja……………..15 – 35 °C Relativna vlažnost……………30 - 70 % Akustični podatki: Gsdpfsxu I R Dox Afweub Način mirovanja……………40 dBA Obratovalni način (1 m razdalje)…………….46 dBA Obratovalni način (40 cm razdalje, odprta vrata)……………62 dBA Tehnični podatki: Velikost tiskalne površine (Š x G x V)……………..…………270 x 195 x 205 mm Minimalna debelina sloja……………..…0,10 mm Natančnost pozicioniranja…………….0,05 mm Temperaturno območje šobe…………….160 – 260 °C Temperaturno območje grelne plošče……………..30 – 100 °C Material filamenta……………ABS, PLA Premer filamenta……………..1,75 mm Programska oprema/Slicing program…………….EVO-lizer

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Gusdjibikwepfx Afweb

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 200 h, skupna dolžina: 2.128 mm, skupna širina: 1.294 mm, vhodna napetost: 400 V, trajanje garancije: 6 meseci, vhodni tok: 32 A, laserska moč: 100 W, kapaciteta rezervoarja: 32 l, volumenski pretok: 20 m³/h, Stroj za lasersko sintranje poliamida z dvema izmenljivima posodama in razpakirno postajo. Stroj si je mogoče kadar koli ogledati in preizkusiti v demo centru BIBUS-Austria. Poleg tega ima sistem hitro menjavo med vlečno rezilo in premaznim valjem – sistem je vedno na najnovejšem tehnološkem nivoju, saj so se izvajale stalne nadgradnje. Gsdpeqwkypofx Afwsub

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 155-11000, Leto izdelave: 2021, Ponujamo 3D tiskalnik Stratasys Fortus 450mc v odličnem stanju, letnik 2021. Gujdpfx Afeym Dl Nswob Če imate vprašanja ali potrebujete dodatne informacije, nam brez oklevanja pišite ali nas pokličite.

Stanje: rabljeno, Funkcionalnost: nefunkcionalno, Leto izdelave: 2007, 3D tiskalnik je popoln, vendar so tiskalne glave obrabljene. Gujdpfx Asw Inmasfweb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 95 h, FDM tehnologija z aktivno ogrevano tiskalno komoro velikosti 300 x 300 mm, sistem z 2 šobami Gedpeymkt Tofx Afwsub

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: AK26-015, število kartuš s črnilom: 8, skupna dolžina: 4.400 mm, skupna širina: 4.400 mm, skupna višina: 1.820 mm, vhodna napetost: 380 V, skupna masa: 4.400 kg, višina izdelka (maks.): 50 mm, Oprema: dokumentacija / priročnik, hladilna enota, Hybrid UV inkjet printer for rigid and roll materials. Print resolution: 1200 dpi Drop modulation: Binary, Greyscale Number of colors: 6 colors - CMYK Lc Lm Additional white ink printed as underprint before color inks All colors cured using LED lamps Gujdjqlahtspfx Afwjb Printhead droplet size: 7-14-21 picoliters Maximum material thickness: 50 mm Maximum print width for rigid materials: 3,500 mm Capability to print two boards side by side simultaneously Output table for rigid materials, length: 2,200 mm Maximum print width for roll materials: single roll 3,470 mm, two rolls side by side 1,625 mm Maximum roll material weight: 350 kg Maximum roll diameter: 350 mm Media loading/unloading supports for two rolls up to 3,470 mm length each

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 140L-C, Leto izdelave: 2022, obratovalne ure: 5.854 h, skupna dolžina: 1.450 mm, skupna višina: 1.040 mm, skupna širina: 1.250 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 380 kg, vhodna napetost: 400 V, vhodni tok: 12 A, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 10 °C, okoljska temperatura (maks.): 40 °C, električna varovalka: 16 A, širina mize: 500 mm, kapaciteta rezervoarja: 140 l, dolžina mize: 700 mm, moč: 8,3 kW (11,28 KM), največja hitrost vožnje: 24.000 mm/min, število tiskalnih glav: 2, Refurbished industrial fused filament fabrication (FFF) printer Includes: - 140L-C printer unit - Vibration-damped platform - License for slicing software (Simplify3D) Original price: €73,800 General technical specifications: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (fused filament fabrication) Filament diameter: 1.75 mm; open-material system Build area (L x W): 700 mm x 500 mm Build height: max. 400 mm Build volume: max. 140,000 cm³ Dimensions and weight: Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature specifications: Max. printhead surface temperature: 300°C (optionally 450°C) Max. build plate surface temperature: 180°C Max. build chamber temperature: 85°C Min. operating temperature: +10°C Max. operating temperature (ambient): +40°C Electrical data: AC input: 400 V / 50 Hz Power supply: 24 V DC Connectivity: USB 3.0 / Ethernet Printing characteristics: X-axis speed: max. 400 mm/s Y-axis speed: max. 400 mm/s Z-axis speed: max. 300 mm/min Guodpfexuh Nyox Afweb XY-plane printing accuracy: < 0.1 mm Print control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Incl. storage compartments Incl. vibration-damping machine feet

Stanje: rabljeno, Táto nabídka je na tiskárnu Sartorius YDP30 Thermo Direct Printer. Zařízení je plně funkční a připraveno k okamžitému použití. Přehled & kompatibilita Navržena pro bezproblémovou spolupráci s laboratorními vahami Sartorius (Practum®, Quintix®, Secura®, MA37, MA160) — tiskárna je automaticky detekována a uživatele provede tiskovými protokoly v souladu s GLP pro sledovatelnost a přesnost. Guedpfxexhfy Ne Afweb Podporuje přímý termotisk (kdy se papír přímo zabarvuje) i termotransferový tisk (s páskou pro odolné, stálobarevné výtisky). Certifikovaná váha Tiskové možnosti Rozlišení: 203 dpi pro čitelný text a čárové kódy Flexibilita tisku Maximální šířka tisku: 54 mm (2,13") — vhodné pro standardní laboratorní protokoly ve stylu A4 i úzké samolepicí etikety Možnosti etiket: Tisk na vyžádání na běžný papír, kontinuální role nebo samolepicí etikety při použití kompatibilních pásek.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, 120cm Endless UV LED Digital Scan Camera CCD Visual AI Printer Simultaneous Scanning and Printing - No more stencils – free-form applications - Multiple images printed simultaneously - Significant speed advantage Material Width: 1200mm ENDLESS LENGTH due to conveyor belt Material Height: 150mm (higher clearances available on request) Recommendation: 3x Ricoh Gen5 for CMYK + White (quoted price) 4x Ricoh Gen5 for CMYK + White + Varnish (approx. €3,500 surcharge) Includes vacuum table Includes conveyor belt Includes operator computer Includes CCD Visual AI camera system Depending on the number of print heads: 12–40 sqm/h or more With 2 heads approx. 12 sqm per hour possible Guedpfx Afjt E Dk Ujwjb Machine Dimensions: 2060mm x 2700mm x 1300mm Weight: approx. 500kg + pallet Machine Power: 4500W

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer digital flatbed printer - replaces conventional laser printers - also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: UV4060 Print head: Epson TX800 Max. resolution: 2690 dpi Includes software for printer operation and image processing Dimensions: 800*858*566mm Weight: 70kg 360-degree printing possible on request: suitable for bottles and round objects A3 format (31x55cm) and up to 23cm printing height supported 5x500ml ink bottles available upon request (surcharge applies) Software setup and printer training provided as needed. Available across Germany/Europe (surcharge applies). Print demonstration videos etc. can be supplied via email or WhatsApp upon request. Gjdpfx Ajd Ewzisfwjub

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.504 h, Oprema: ABS, kompresor, Tiskalnik je popolnoma funkcionalen in še vedno priključen na elektriko. Ni bil pogosto uporabljen, le 1504 delovnih ur. Na voljo so vse licenčne materiale za modele iz leta 2019. Novi komplet PM je na lokaciji in bo nameščen tik pred odpremo tiskalnika novemu kupcu. Enota za odstranjevanje podpor EFT-900 je na voljo. Gujdpfjw Imk Rjx Afwjb

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, skupna dolžina: 1.450 mm, skupna višina: 1.800 mm, skupna širina: 1.100 mm, vrsta vhodnega toka: trifazni, skupna masa: 3.000 kg, trajanje garancije: 12 meseci, širina mize: 1.450 mm, kapaciteta rezervoarja: 19 l, dolžina mize: 1.100 mm, teža obdelovanca (maks.): 150 kg, CENA 95.000 EUR (neto, brez DDV) STORITVE VKLJUČENE V CENO: - Lesena zabojna embalaža za mednarodni transport - Montaža in kalibracija s strani nekdanjega zaposlenega v podjetju Massivit, certificiranega za Massivit sisteme - Na­kraju opravljeno usposabljanje operaterja s strani nekdanjega zaposlenega v podjetju Massivit, certificiranega za Massivit sisteme - Podeljena oddaljena tehnična podpora za strojno in programsko opremo po montaži (proizvodnja g-kode) - 1 leto garancije vključeno Strokovna montaža je izvedena s strani nekdanjega zaposlenega, ki je certificiran za Massivit sisteme. Možnost izvedbe testnih izpisov na zahtevo. Gusdpfx Aexx S Diefwjb OPIS STROJA: Industrijski 3D-tiskalnik velikega formata Massivit M1800 Pro, letnik 2018, strokovno obnovljen in popolnoma funkcionalen. Montaža, usposabljanje operaterja ter tehnična podpora po montaži so vključeni in jih neposredno zagotavlja certificirano osebje Massivit. To zagotavlja pravilno namestitev, optimalno kalibracijo ter hiter in zanesljiv začetek proizvodnje. Stroj je opremljen z dvema neodvisnima tiskalnima glavama in omogoča tiskanje s prostornino 145 × 111 × 180 cm, kar je primerno za izdelavo izredno velikih delov, kalupov, glavnih modelov in predstavitvenih elementov. Sistem uporablja GDP (Gel Dispensing Printing) tehnologijo, utrjevanje z UV-žarki, ki omogoča hitro proizvodnjo velikih kosov z zmanjšano potrebo po podporni strukturi, kar prinaša nižjo porabo materiala in krajši čas naknadne obdelave. Tiskalnik je bil obnovljen z originalno-specifikacijskimi komponentami in je bil podvržen popolni mehanski poravnavi, kalibraciji ter funkcionalnemu testiranju. Ogled stroja pod napetostjo je možen po dogovoru. Tipične uporabe so vizualne komunikacije, avtomobilske in navtične komponente, arhitekturni elementi, industrijsko prototipiranje, scenografija in izdelava kompozitnih kalupov. TEHNIČNI PODATKI: Tip stroja: Industrijski 3D-tiskalnik velikega formata Proizvajalec: Massivit Model: M1800 Pro Leto izdelave: 2018 Prostornina tiska: 145 × 111 × 180 cm Tiskalni sistem: Dve neodvisni tiskalni glavi Tehnologija: GDP – UV utrjevanje z nanašanjem gela Potrebe po podporah: Zmanjšane Največja višina kosa: 180 cm Teža stroja: približno 3.000 kg Električni priklop: Trifazni Podprti materiali: Dimengel 90, Dimengel 100, Dimengel 300 Transparentni Kapaciteta rezervoarja za material: 19 l Stanje: Strokovno obnovljeno Funkcionalnost: Popolnoma funkcionalen, možen preizkus pod napetostjo DETALJI OBNOVE: - Dispenzerji obnovljeni z novimi rotorji, ležaji in sklopkami - Hidravlična črpalka obnovljena z novim rotorjem - Sistem filtracije gela obnovljen in z novimi filtri - UV moduli za utrjevanje testirani in kalibrirani - Napetost jermen XYZ nastavljena in poravnava mize popolna - Celotna funkcionalnost sistema obnovljena in preverjena pred prodajo Stroj je pripravljen za prevzem. Nakladanje, manipulacija in transport so strošek kupca. CENA 95.000 EUR (neto, brez DDV)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X7QP000006, širina papirja (maks.): 1.620 mm, Epson SureColor SC-R5010L tiskalnik s smolnimi črnili širokega formata v dobrem delovnem stanju, na voljo za takojšnjo prodajo. Ključni podatki (po oznaki in prikazu na stroju): Model: SC-R5010L / K391A Serijska št.: X7QP000006 Napajanje: 200–240V / 50–60Hz (evropska specifikacija, CE certifikat) Poročilo o delovanju (prikazano na zaslonu): Skupna natisnjena površina: 38.231,59 m² Skupna dolžina podanega medija: 33.162,7 m Skupno število prehodov vozička: 4.060.051 Lastnosti tiskalnika: UltraChrome RS smolni črnilni sistem (6 barv + Optimizer + Maintenance Liquid) Dvojna enota za rinfuze (2 × 1,5 L vrečk s funkcijo "hot-swap") Gedsytrfdepfx Afwoub PrecisionCore Micro TFP tiskalna glava Širina tiskanja: 64" (162 cm) Bezzapahna, na vodni osnovi smolna črnila – primerna za vinil, transparente, tekstil, platno, tapete, folije Možnost takojšnje laminacije LCD zaslon na dotik za upravljanje Preverba šob natisnjena na dan objave (11.03.2026) – vsi barvni kanali delujejo Vključuje: Glavna enota tiskalnika z rinfuze sistemom Samodejni navijalni sistem za medij Vsi kanali za črnila prisotni Dodatna črnila, ki jih imamo na zalogi Tiskalnik je nameščen na paleti. Možen ogled. Primeren za izdelavo reklamnih napisov, širokoformatnih tiskarn, tapet in proizvodnih okolij.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SG76G34001, Leto izdelave: 2017, obratovalne ure: 11.062 h, Trindo Digitalmanufaktur GmbH is selling a well-established production system of the HP Multi Jet Fusion class. The system is designed for industrial multi-shift operation and has been continuously maintained. System components: - 1x HP Jet Fusion 4200 Printer (M0E85A) - 1x HP Jet Fusion Processing Station (M0E89A) with Fast Cooling Function - 3x HP Jet Fusion Build Units (M0E92A) for maximized throughput Service & Maintenance Status: Active 3daas Contract: The machine is currently under an active HP Service Contract (3D-as-a-Service). Benefit for the buyer: As the system has been continuously maintained by HP, the typically expensive and complex recertification by the manufacturer is not required when taking over or relocating the system. Condition: Fully functional. All wear parts have been replaced at regular intervals by certified technicians under the service contract. Production capacity: Equipped with three build units, the system is optimized for high-throughput operation. This allows parallel scheduling of the following processes: - Printing process (Build Unit 1) - Cooling/unpacking phase in the processing station (Build Unit 2) Guedpfxoyiz Nqs Afwsb - Cleaning and refilling/setup time (Build Unit 3) Transfer conditions: - Location: Munich (Trindo Digitalmanufaktur GmbH) - Documentation: Maintenance logs and operating hours can be reviewed if there is justified interest. - Inspection: System appraisal during ongoing operation is possible by prior arrangement.