Wp Kemper Gnetilni Stroj Z Ročicami nakup rabljenega (62.498)

Stanje: dober (rabljeno), vrsta goriva: dizel, barva: zelen, Leto izdelave: 2019, obratovalne ure: 9.400 h, Leto izdelave: 2019 Namen uporabe: Gradbeništvo Število cilindrov: 1 Gujdeyzh Ncspfx Abhjb Lastna teža: 19.000 kg Dolžina jambora: 9 m Tehnično stanje: dobro Vizualno stanje: zelo dobro Serijska številka: 818.0.2497

Stanje: dober (rabljeno), vrsta goriva: dizel, Leto izdelave: 2017, obratovalne ure: 8.550 h, Leto izdelave: 2017 Pogon: kolesa Dolžina droga: 14 m Godpfxoy Shpke Abheub CE označba: da Tehnično stanje: dobro Optično stanje: dobro Cena: po dogovoru Serijska številka: 094970

Stanje: novo, Leto izdelave: 2022, Sheet width 2065 mm Guedpfx Aboxaat Iohjb Sheet thickness 1.20 mm Opening width 30.0 mm Max. bending angle 0 - 135° Total power requirement: manual Machine weight approx. 500 kg Space requirement approx. 2400 x 1115 x 1500 mm - Universally applicable bending machine for metal roofing workshops and repair shops - Robust construction in modern design - Easy adjustment of the upper beam via foot pedal, hands remain free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending options - An auxiliary cylinder assists the bending process during edge bending - Quick and easy bending process using bow handle - Easy adjustment of the lower beam for the respective sheet thickness - High upper beam for producing profiles with high upstands Equipment: - Segmented upper beam - Back gauge - Bending segments: 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Naprodaj mobilni ventilni stroj za obdelavo / struženje Unigrind FDA 500. Stroj je rabljen, v dobrem stanju in popolnoma delujoč. Možen ogled in testiranje na lokaciji. Unigrind FDA 500 je namenjen obdelavi in popravilu tesnilnih površin, sedežev ter prirobnic ventilov. Omogoča natančno struženje, rezkanje ter obnovo površin neposredno na delovišču. Specifikacija: Model: Unigrind FDA 500 Leto: 2013 Mobilni stroj za obdelavo ventilov Za popravilo ventilov, prirobnic in tesnilnih površin Godpfx Asy R R Imobhsub Natančna obdelava ravnih in stožčastih površin Primeren za različne vrste industrijskih ventilov Kompaktna in robustna konstrukcija Profesionalna industrijska oprema Nemška kakovost Več informacij: Unigrind FDA 500 Primeren za podjetja v energetiki, naftni, plinski, kemični in industrijski panogi ter servisne delavnice. Za dodatna vprašanja z veseljem odgovorimo.

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Naprodaj je stacionarna brusilna / lapirna miza za ravne površine Unigrind KSM600. Oprema je v dobrem stanju in popolnoma delujoča. Možen je ogled in preizkus na lokaciji. Unigrind KSM600 je namenjen brušenju in lapiranju tesnilnih površin. Primeren za obdelavo in obnovo površin ventilov, loput, prirobnic ter drugih industrijskih komponent. Specifikacija: Model: Unigrind KSM600 Stacionarna brusilna / lapirna miza za ravne površine Za obdelavo ravnih tesnilnih površin Primeren za popravilo ventilov, loput in prirobnic Robustno industrijsko ohišje Stabilna in natančna obdelava Enostavno in udobno upravljanje Profesionalna industrijska naprava Več informacij: Unigrind KSM600 Primerno za servisne delavnice, energetiko, naftno, plinsko in industrijsko dejavnost. Gujdpfx Aey R Rl Sebhob Za dodatna vprašanja smo vam z veseljem na voljo.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Short & Sweet Base Axis (X): 1.3–2 mm Gantry (Y): 1.3–4 mm Accuracy: 0.06 mm Technical Data Linear Axis Accuracy: ± 0.1 mm/m Maximum Traversing Speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circularity: ± 0.1 mm Z-Axis Stroke: 180 mm Base Axis (X): 1.3 m, 3 m, 4 m Gantry (Y): 1.3 m, 2 m Equipment and Accessories Maintenance packages UltraPierce1 Drilling Aid Splash Guard1 FlowTexturing (FTT) ecoFlow Abrasive Removal System FlowNest* FlowXpert* Guedpfxjhw Nfqo Abhjb Laser Pointer Clamping and Holding System Pure Water Conversion Kit * Required for FlowTexturing.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, Motion06 usmerjevalnik 30° 1615-1150-1050 RA1337 Razstavni eksponat Blagovna znamka: Motion06 Leto izdelave: 2017 Kot dovoda: 30° Dolžina: 1830 mm poševni dovod in 700 mm po celotni širini, skupaj dolžina 2530 mm in povprečna dolžina 1615 mm Širina traku (RB): 1050 mm (20x40 mm) Višina okvirja: 150 mm Nazivna/zunanja širina (NB): 1150 mm Trenutno nastavljena višina: 560 mm Transportna hitrost: V230/400 Moč: 0,75 kW Višina bočne stene: 300 mm Obseg dobave: z motorjem, oporami in bočnim vodilom (po potrebi prosimo povprašajte) Za individualno, strokovno svetovanje nas kontaktirajte. Pokličite ali pišite nam po e-pošti. Z veseljem vam pomagamo pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega sporočila. S spoštovanjem, ekipa Dr. Sonntag GmbH & Co. KG Gsdpfjk Abhpjx Abhoub Vaš specialist in kontaktna oseba za intralogistiko

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 91.720 h, Funkcionalnost: popolnoma funkcionalen, Zapiralna sila 150 kN Gsdpfx Abeyvt R Ishsub Premer polža D45 mm Največji brizgalni volumen 318 cm³ Vpenjalne plošče 688 x 688 mm Skupna teža 6840 kg Stroj je opremljen z robotom

Stanje: rabljeno, The COMEC MM05/3L is a multi-spindle oscillating drilling machine equipped with seven spindles for the automatic drilling of holes in materials with specified dimensions. The machine features an automatic material feed system that optimizes the machining process by automatically feeding and clamping the workpiece. Gsdpfexrpcisx Abhsub Key technical specifications of the MM05/3L include: – 7 oscillating spindles, – adjustable oscillation, – pneumatic material clamps, – production capacity of several hundred parts per hour. The machine stands out for its robust construction, flexible working settings, and CE certification, thereby ensuring safety and compliance with European standards. It is ideally suited for manufacturing applications requiring precise multi-point drilling in a variety of materials, as typically found in the furniture and woodworking industries. The automatic material feed, combined with the multi-spindle drilling unit, increases efficiency and repeatability in production processes, minimizes operator intervention, and improves workplace ergonomics.

Stanje: rabljeno, Avtomatski vrtalni stroj/večvretenski vrtalni stroj z enotami za čelne montažne tulke. – 2 horizontalni enoti – 2 vertikalni enoti – 4 enote za čelno montažo (dve na vsaki strani) Gujdpoxrmptofx Abhob

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Swing Bending Machine Manufacturer: Schröder Model: SPB EVO 3200//4.0 DU used Gsdpfolnixisx Abhoub Year of manufacture: 2011 Usable length: 3240 mm Max. sheet thickness: 4.0 mm Bending beam lowering: 200 mm Upper beam stroke: 650 mm Bending axis adjustment: 80 mm Max. speed: 100/100 mm up/down Max. bending speed: 90 Max. bending speed DU: 150 mm Max. bending angle: 150° Min. inside bending radius: 1.5 x t mm Upper beam motor power: 2x4.24 kW Dimensions (LxW): 6332 mm x 2380 mm Weight: 12,260 kg.

Stanje: rabljeno, Siat SM26 Zgornji in spodnji lepilnik, popolnoma opremljen z vstopnimi in izstopnimi valji. Največja višina škatle: 110 cm. Največja širina škatle: 50 cm. Gusdpfx Abjya Emushob

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.130 mm, delovna širina: 150 mm, dolžina mize: 4.130 mm, širina mize: 150 mm, Ponujamo rabljeni avtomatski brusilni stroj MVM KX41 z avtomatskim nakladalcem, letnik izdelave 2010. Stroj je delujoč, vendar za našo proizvodnjo ni več uporaben. Dimenzije mize: 4130x150 mm, nagibna (avtomatsko). Avtomatski nakladalec/razkladalec. Stroj je popoln, kot je viden na slikah. Proizvajalec: MVM Model: KX41 Leto izdelave: 2010 Stanje: rabljen ID kategorije: 151 Gjdpsy Nl Edsfx Abheub ID tipa: 1363 Tip stroja: Avtomatski brusilni stroj z nakladalcem Za dodatna vprašanja ali informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Technical Data Turntable Stretch Wrapping System with Top Sheet Dispenser, for Fully Automatic, Waterproof Packaging of Palletized Goods Manufacturer: UNITECH S.r.l., Via Buscaglia 10, 27029 VIGEVANO, Italy Model: UNIWRAP 200 AE Year of manufacture: 2007 Output capacity: approx. 30 pallets per hour Connected load: 400 V / 50 Hz / 7.5 kW Weight: 3,700 kg Stretch film, roll diameter: 300 mm Roll height: 500 to 750 mm Core diameter: 76 mm Film thickness: 15 to 35 microns Roll weight: 25 kg Top PE cover film, roll diameter: 250 mm Core diameter: 76 mm PE film roll width: max. 1,700 mm Film thickness: 60 to 100 microns Control system: Siemens Simatic S7-200 Control panel: Siemens OP 77A Unit dimensions wrapping station: 3,400 x 3,100 x 3,900 mm (L x W x H) Gsdpfx Aju Tg Nnjbhoub Roller conveyor dimensions: 10,000 x 1,150 x 570 mm (L x W x H) Description: The Uniwrap 200 AE is a robust stretch wrapping system built from high-quality components ensuring long-term reliability, thereby minimizing maintenance costs. Incorporating the latest technologies allows full control over the pressure applied by the stretch film to the product, the pre-stretch ratio, and the overall containment force of the packaging. The Uniwrap 200 AE features a top film applicator, which can be programmed to meet customer requirements. Condition: The entire packaging line is still assembled, in truly excellent condition, immediately ready for operation, and can be demonstrated under power on site. Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing by appointment is possible. We accept no liability for technical specifications or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, Technical Data of the Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours (as of December 2025) Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Guedpox Dnb Usfx Abhsb Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: • 1 MACPRESSE baler, model 111A • 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams Notes: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank fully drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism • Replacement of the front two main running rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate • Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains lubricated and tensioned • All wire deflection rollers overhauled • All door contact switches replaced • Wirbulator dismantled, disassembled, and overhauled • General maintenance work performed Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine. Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence Gsdpfx Aehqnl Tsbhsub - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free We cut everything All materials formed to shape: - Aluminum - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Guedsd Ab Uuepfx Abhob Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Na voljo je razmeroma nova CNC vodno-rezalna naprava Intermac. Delovne dimenzije X/Y: 3000mm/2000mm, obratovalne ure: cca 4500h. Dokumentacija je na voljo. Ogled na lokaciji je možen. Guodpfoy E S Eiex Abhob

Stanje: rabljeno, Comec FM0/2000/CA Horizontal Boring Machine with Feeder 6 horizontal heads + approximately ten additional heads and spare spindles (see photos) Gedperkctcjfx Abheub 4 belt-driven motors Working length: 200 cm

Stanje: dober (rabljeno), Leto izdelave: 2021, delovna širina: 400 mm, vrsta nastavitve višine: električni, Valjčna nanašalna naprava Proizvajalec: Cosma Tip 400 RC Leto izdelave: 2021 Dvovaljna naprava za nanašanje olja Z valjčnim sistemom nanašanja Cosma je mogoče olja nanašati na masivne lesene talne obloge (parket), obloge, stopnice, vrtni material, opažni les in stenske dekoracije. Delovna širina: 400 mm Primerno za obdelovance: Debelina: 10 - 50 mm Gusdpfxsy Ic Ume Abheb Delovna višina: 900 mm Opremljen z: - Dozirni valj, 0,37 kW - Gumiran nanašalni valj, 0,37 kW, 25 Shore Z električnim nastavljanjem višine in mehanskim prikazom višine Krmilna plošča za: Hitrost podajanja, amper na valj in nastavljanje višine valjev

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 700 h, CMS Tecnocut Easyline As new, only approx. 700 operating hours Cutting Area / Axis Travel: X-Axis: 2,000 mm Y-Axis: 4,000 mm Z-Axis: 150 mm C-Axis: 630° B-Axis: +/- 60° Included Equipment: - 5-axis cutting head incl. angle compensation - Abrasive dosing and vacuum monitoring - Height sensing - CAD/CAM - Laser - Central lubrication Gujdpfx Astq Eh Dsbhob CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical Data Total power consumption: 34 kW at 5 l/min Power supply: 400 V +/- 5% / 50 Hz Max. water pressure: 4,150 bar Pressure vessel: 1.2 l Water flow rate: max. 5 l/min Nozzle opening diameter: max. 0.40 mm The pressure intensifier with direct-drive servomotor offers the following advantages: + Energy-efficient + Proportional power consumption + No maintenance-prone hydraulics + < 75 dBA + Low maintenance thanks to 60% fewer structural components + Integrated water pump + Long-life seals Including installation and 12-month warranty!

Stanje: skoraj kot novo (rabljeno), Spindle diameter 40 mm Lenze roller feed for curved elements Stepless speed regulation Guodpfx Aov Uz S Sebhsb Feed motor power 0.25 kW Feed direction left/right Safety switch Manual spindle height adjustment Table width 104 cm Table length 98 cm Cast iron machine construction

Stanje: novo, Stroj za oblikovanje vzmeti z ekscentričnim pogonom. Dobro preizkušen stroj, ki bi ga moral imeti vsak proizvajalec vzmeti v svoji proizvodnji, saj na trgu zagotavlja eno najboljših razmerij med ceno in kakovostjo izdelave. Guedsi Ik Hropfx Abhob

Stanje: zelo dobro (rabljeno), ENOSTRANSKA ROBNA LEPILKA (Leva) Debelina roba na kolutu (min/max) mm 0,3 / 3 Debelina roba v letvicah / trakcih (min/max) mm 0,4 / 20 Debelina plošče (min/max) mm 8 / 60 NOV (v 2024) krmilni sistem Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Podajalna hitrost do 25 m/min Uvajalni sistem EZ 14 Gujdsyyvp Uepfx Abheb Razpršilna enota (za tekoči premaz proti sprijemanju) Nastavljivo vodilno letev upravljano s CNC Enota za obrezovanje 2 x Kw 3 Lepilna enota (P.U.R. lepilo + predtalilnik) Cona za pritisk roba (CNC upravljanje) Magazin za robove v kolutih (predal št. 2) Kapa agregat HL 84 (2 x Kw 0,5 približno) Pnevmatsko nihanje in nastavitev Predrezalna enota BF 20 (2 x Kw 1,5 približno) Multifunkcijska enota (radiusno in oblikovno rezkanje) FK 11 (2 x Kw 0,4 približno) Profilni potezni noži Finish enota (ravni potezni noži + polirna enota) FA 11 203019) Št. 1 sistem za vračanje "LIGMATECH" Mod. ZHR 541/L/095 (s portalskim mostom in 360° vrtljivo sesalno glavo)

Stanje: dober (rabljeno), moč: 100 kW (135,96 KM), vrsta goriva: dizel, barva: rumena, Leto izdelave: 2017, obratovalne ure: 9.296 h, = Dodatne možnosti in oprema = - PTO = Dodatne informacije = Letnik izdelave: 2017 Namen uporabe: Gradbeništvo Pogon: Kolesa Število valjev: 4 Gusdpfx Aoy Nlldebhob Lastna teža: 22.900 kg Znamka nadgradnje: 4 CE oznaka: da Tehnično stanje: dobro Vizualno stanje: dobro