Valjčni Transporter 1,2 M nakup rabljenega (79.912)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard Nedpfxjfdkb To Ah Uowg - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) Nwodpfsd Tqalsx Ah Uog - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Njdpfx Ahsfdkb Us Uowg - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany Nedpfjfdkbhox Ah Uswg - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Njdpfxoguk Dks Ah Ujwg - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Nwjdpfemhhy Nex Ah Ujg Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: rabljeno, Lippert Ausrichtförderer Schrägrollenbahn Schrägförderer 2050-650-530 RA2281 Hersteller: Lippert Baujahr: unbekannt Rollenbreite (RB): 530 mm Nenn-/Außenbreite (NB): 650 mm Länge: 2050 mm Rollendurchmesser: 50 mm Rollenabstand: 60 mm Nedsy Ih U Eopfx Ah Ujwg Rollenbahnmotor: SEW-Getriebemotor Bauhöhe: 130 mm Fördergeschwindigkeit: bitte kontaktieren Winkel der Rollen: ca. 5° Optional: Füße Seitenführung Angepasster Fördergeschwindigkeitsbereich mit Frequenzumrichter Preis zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzen Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns telefonisch oder per E-Mail. Wir unterstützen Sie gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns, von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Stanje: rabljeno, Valjčni transporter za tračno žago s 4 izvlečnimi prečniki s podpornimi valji Dolžina: 5,7 metra Skupna širina: 4 metre Skupna širina izvlečnikov: 3,35 metra Širina valjev: 160 cm Širina valjčnega transporterja: 185 cm Že demontiran Lokacija: Avstrija, v bližini Gradca (Notranja številka: 10br11) Nodpfx Ahoyxz U He Ujwg

Stanje: zelo dobro (rabljeno), Motorized conveyors available immediately – ISC RECYCLE We offer several used, overhauled, and very well-maintained King Drive Roller and powered conveyors, available immediately for your intralogistics projects. Ideal for: • Order picking lines • Automated conveying • System extensions • Optimization of logistics flows Available equipment: King Drive Roller Conveyors – TGW • Usable width: 420 and 620 mm • Length: 495 to 3182 mm • Power supply option: 48VDC • 50 mm steel rollers Powered roller conveyors – TGW / INTERROLL / KNAPP / HÖRMANN KLATT • Usable width: 420 and 670 mm • Length: 600 to 2700 mm • 50 mm steel rollers Motorized conveyors with belt transfers – TGW • Usable width: 420 and 620 mm • Length: 900 to 2100 mm • 50 mm steel rollers Njdpfx Aoy S A Rcjh Uewg Integration options: • Power cabinet • Control cabinet - Standard supports and guides included - Integrated control boards and sensors - Accessories available: end stops, retractable flaps, etc. - Equipment available immediately - Price on request - Shipping available ISC RECYCLE – Pre-owned intralogistics solutions.

Stanje: dober (rabljeno), Leto izdelave: 2000, Cross conveyor and return roller belt for a wide belt sander Njdpfx Ahewlc Sgj Uswg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, 1000 metrov valjčnih prog Premer valjev: 76 mm Širina valjev: 400 - 500 mm Medosna razdalja med valji: 20 mm Višina od tal do vrha valjev: 250 mm Nwsdpfxsyz T Ude Ah Ujg Dolžina segmentov: 2000 - 3000 mm Rabljeno, v dobrem stanju Cena na meter: 30,00 evrov Kupite lahko količino po potrebi. Zelo dobro ohranjeno, že zloženo in pripravljeno za dostavo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Valjčna proga dolžine 5 m, z možnostjo razstavljanja na manjše elemente za transport (možnost cenovno ugodnega pošiljanja znotraj EU) Nwjdpfjy Sinhsx Ah Uog

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Gravity Conveyors Available – ISC RECYCLE We offer several used gravity conveyors, overhauled and in excellent condition, available immediately. Ideal for: - Preparation lines - Dispatch/Shipping areas - Facility expansions - Optimization of logistical flows Available models: TGW Njdpoy Ry N Hsfx Ah Uowg • Usable width: 420 mm • Length: 2800 mm • Pitch: 110 mm • Rollers: 50 mm • Steel rollers • Very good condition TGW • Usable width: 420 mm • Length: 1800 mm • Pitch: 110 mm • Rollers: 50 mm • Steel rollers • Very good condition TGW • Usable width: 620 mm • Length: 2400 mm • Pitch: 50 mm • Rollers: 40 mm • PVC rollers • Very good condition Interroll • Usable width: 420 mm • Length: 2517 mm • Rollers: 50 mm • Steel rollers • Very good condition Knapp • Usable width: 660 mm • Length: 841 mm • Pitch: 100 mm • Rollers: 50 mm • PVC rollers • Very good condition Conveyors are provided with standard supports and included side guides. Various accessories are also available: end stops, retractable flaps, etc. - Equipment available immediately - Price on request - Shipping possible ISC RECYCLE – Pre-owned intralogistics solutions.

Stanje: rabljeno, DELLE VEDOVE valjčna steza, dolžine 3,5 m Nedpfxsxrtq Ro Ah Uowg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, premer valja: 50 mm, širina valja: 410 mm, skupna širina: 490 mm, skupna dolžina: 3.480 mm, Interroll RM 8110_R_Straight motorized roller conveyor Total length: 3480 mm Roller width: 410 mm Total width: 490 mm Roller diameter: 50 mm Nwedpfxov T Dtio Ah Ujg We offer over 100 meters of roller conveyors from the manufacturer Interroll—in various lengths, with or without drive, curves, adjustable legs, access gates, diverters, angled feed-ins, transfer units, and more.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Roller Conveyor - Curve - 90° Manufacturer: Interroll Model: RM8320_R24/48V_CURVE General Technical Data Nwjdpfxswbh D Hj Ah Ueg Max. load capacity: 50 kg/zone Conveying speed: 0.1 to 1.0 m/s (up to 50 kg) 1.01 to 1.39 m/s (up to 35 kg, 48 V, 50 W, BI, max. 10 starts/stops per minute and a conveyed goods length of at least 450 mm) Max. electrical power per zone: 50 W Roller type: Interroll Series 1700KXO Roller diameter: 50 mm Roller material: steel 1.5 mm, with grey conical polypropylene sleeves Max. number of rollers per zone: 6 for 30°, 9 for 45°, 12 for 60°, 18 for 90° Price: per unit. We offer over 100 meters of roller conveyors from manufacturer Interroll – in various lengths, with or without drive, curves, adjustable legs, walk-through flaps, skewed infeed merge units, transfer elements...

Stanje: dober (rabljeno), Powered roller conveyors WDX - Roller width: 500 mm - Conveyor length: 2200 mm - Power supply: 2 energy-efficient 24V DC motors – ITOH DENKI - Motor speed: 55 m/min Nwedopxnu Ropfx Ah Uog - Network control capability SPECIAL OFFER: Free control cabinet with the purchase of 10 conveyors. Also available for sale: - Gravity conveyors – approx. 260 linear meters - Powered roller curves – approx. 24 linear meters - 90-degree directional roller-belt transfer modules – 15 units (including approx. 30 linear meters of powered conveyors) - Roller belt conveyors, 800 mm roller width – approx. 15 linear meters - PVC belt conveyors, 800 mm belt width – approx. 30 linear meters - Control boxes for conveyors - In-motion checkweigher DWT/HC 30S – 2 units - Carton Flow racking in various sizes

Stanje: rabljeno, Leto izdelave: 2017, Mecalux valjčni transporter / valjčna proga 1800-740-650 RA1917 Proizvajalec: Mecalux Širina valjev (RB): 650 mm, jekleni valji Nwedpfjxp S A Tox Ah Ujg Nazivna/zunanja širina (NB): 740 mm Dolžina: 1800 mm Višina okvirja: 130 mm Premer valjev: 50 mm Razmak med valji: 75 mm Pogon valjev: 2x ITOH-Deki 16936/010 Transportna hitrost: prosto nastavljiva z frekvenčnim pretvornikom med 0,543 in 0,95 m/s Obseg dobave: brez podpor Opcijsko na voljo: Podpore Stransko vodenje enostransko ali obojestransko Za individualno in strokovno svetovanje nas kontaktirajte. Pokličite nas ali pošljite e-pošto. Z veseljem vam bomo pomagali pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega klica. Lep pozdrav, Ekipa Dr. Sonntag GmbH & Co. KG Vaš specialist in kontakt za intralogistiko.

Stanje: dober (rabljeno), Long-link roller chains, conveyor chain, roller chain, drive chain - Chain length: 10 m - Pitch: 200 mm - Inner width: 48 mm - Dimensions: 1200/1000/100 mm Njdpfx Aed Tih Rjh Uswg - Weight: 176.5 kg

Stanje: dober (rabljeno), Long Link Roller Chains, Conveyor Chain, Roller Chain, Drive Chain - Chain length: 9600 mm Njdpjd Tih Tjfx Ah Ujwg - Pitch: 200 mm - Inner width: 48 mm - Dimensions: 1140/920/100 mm - Weight: 166.5 kg

Stanje: dober (rabljeno), Long-link roller chains, conveyor chain, roller chain, drive chain - Chain length: 10.4 m - Pitch: 200 mm - Inner width: 48 mm - Price: per unit Nodod Tih Njpfx Ah Ujwg - Quantity: 2 units - Dimensions: 1140/960/100 mm - Weight: 180 kg/unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DB 5044Q01A, transportna dolžina: 2.000 mm, delovna širina: 1.300 mm, Pogonski valjčni transporter z UV-svetilkami za segrevanje, približno 600 ur delovanja, v idealnem stanju. Nodpfx Aoy Emldeh Uewg

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Very sturdy roller conveyor with hydraulic lift and lower cross conveyor. Section 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Nwjdot Hg Hujpfx Ah Ueg Construction height 1,000 mm. Integrated hydraulic lift and lower cross conveyor with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Completely sheet metal covered. Hydraulic supporting idler rollers. Driven by a geared motor. New bearings. Section 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lift and lower cross conveyor with 6 chain strands. Cantilevered design allows workpieces to be transferred under the roller conveyor to the left or right. Completely sheet metal covered. Including hydraulic power unit for both roller conveyors.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stable roller conveyor with hydraulic lifting and lowering cross conveyor. Conveying length up to end stop: 6.0 m. Total length: 7.10 m. Roller length: 1,600 mm. Roller diameter: 200 mm. Integrated hydraulic lifting and lowering cross conveyor with 6 chain strands. Hydraulically raiseable and lowerable. Nwedpfx Ahjt A U Dyo Ueg All bearings renewed completely prior to decommissioning.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Težki valjčni transporter z medsebojno nastavljivimi valji. 8 kosov na jeklenem podstavku. Dolžina valja 550 mm. 2 x 8 m ali 1 x 8 m. Premer valjev 165 mm. Stabilna ležišča. Njdpfsyq Nndjx Ah Uswg Primeren kot dovajalni valjčni transporter za skobljični stroj, dvojni tračni žagi, krožno žago ipd.