Tračni Blanširnik Za Zelje nakup rabljenega (98.236)

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Črpalka GatheRex™ za zbiranje celic je naprava za delo s tekočinami, zasnovana za uporabo z zaprtimi sistemi za kulturo celic. GatheRex se povezuje z zaprtimi sistemi in uporablja mehanizem z nizkim tlakom, ki s prisilnim pretokom zraka odstranjuje medij, koncentrira celice ter zmanjšuje potrebo po shranjevanju in/ali nadaljnji obdelavi. Notranja zračna črpalka ustvarja tlak v sistemu s črpanjem zraka skozi sterilni ventilacijski filter na napravi za kulturo celic. Ko je sistem pod tlakom, se odvečni medij ali frakcija celic izpihne iz naprave skozi cevovod in v posodo za zbiranje. Podpsz Dx Susfx Al Djgt Model 80000Z je označen s črnimi identifikacijskimi oznakami na sponkah za zapiranje cevi. Ta različica je združljiva z cevmi večjega premera (0,375 palca zunanjega premera) za odstranjevanje medija in z cevmi manjšega premera (0,160 palca zunanjega premera, tip vrečke za transfuzijo krvi) za zbiranje celic. ELEKTRIČNE ZAHTEVE 1. Vhod: 100–240 V AC, ~1,3 A, 50–60 Hz, enofazni Tip varovalke: 5ET 3,15-R, kartušna, z odloženim sprožitvijo, 3,15 A, 250 V, 5 mm x 20 mm (0,2 palca x 0,79 palca), serija 5ET Snemljiv napajalni kabel: C13, 18 AWG, najmanj 10 A, ozemljen (3-žični), UL 62, CSA-C22.2 št. 49 IEC / UL: 61010-1, izdaja 3.1 in 61326-1:2012 IZHODNI Tlak 1. Merilni tlak: 120–180 mmHg (2,32–3,48 psi). Ni potrebe po prilagoditvah glede na višino. 2. Pretok: Najmanj 5 ml/s, pretok tekočine iz G-Rex M-CS OKOLJSKE RAZMIRE 1. Temperatura: 15 °C do 35 °C (59–95 °F) 2. Vlažnost: ≤ 95 % relativne vlažnosti 3. Višina: < 2000 metrov (6561 čevljev) Naprava je v dobrem delovnem stanju. Prosimo, oglejte si tudi naše druge ponudbe.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Bruderer BSTA 500-110B je visokohitrostna stiskalnica, izdelana v Švici, s stiskalno silo 500 kN. Opremljena je z dvojnim servo pogonom BSV 75T za natančno dvotirno podajanje materiala in dosega do 750 udarcev na minuto. Nadzor poteka prek zaslona na dotik B2. Nazivna sila: 500 kN (50 ton) Leto izdelave: 2008 Število udarcev: 100–750 udarcev/min (nastavljivo) Nastavljiva višina: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Nastavitev višine stiskalnega bata: 64 mm Površina stiskalne mize: 1080 x 650 mm Vključno s kabino Nadzor: B2, nadzorna plošča stiskalnice na osnovi IPC, programirljiv pomnilnik za hitro nastavitev DVOJNI SERVO POGON BSV 75T Tip: Tandem dvojni servo pogon, neodvisno nadzorovani tirov Maksimalna širina traku: 70 mm na tir Maksimalna debelina materiala: 2 mm Dolžina podajanja: nastavljiva, prosto programirljiva Kot podajanja: nastavljiv Pilotni sprožilni kot: nastavljiv Brez prijemnih letev/objemnih naprav – trak se med procesom stiskanja drži s pogonjenimi podajnimi valji Zasnovana za vzporedno podajanje dveh trakov ali za podajanje predoblikovanih/predstiskanih trakov. Pjdpfx Alezh Nnwe Dogt

Stanje: rabljeno, 1 Izbor: vpenjalne glave SK 45 25 kosov Pgjdpfx Aloz Dvhme Det

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, PRODAMO RABLJENO STROJ ZA LEPLJENJE FUŽINE, MODEL KUPER FW/J-920, V DOBREM STANJU! Pjdpfx Aloz Dw Die Dsgt

Stanje: novo, ATEX version Gear-driven radial fan Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Noise level 78 dBA Foldable side and rear walls (rear wall with extraction function) Working area: 2500 x 800 mm Working height: 930 mm Incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow: 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter: 320 mm Filter cartridge length: 600 mm Total filter surface: 34.8 m² Noise level: 78 dBA Compressed air: 5–7 bar Note on used machinery: Pgjdpfxoh Ucqts Al Djt • Specifications subject to change and prior sale. • All prices are ex works, loaded free of charge at site. • The machines have been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Pgedpfst Dx U Sox Al Det Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Pgodsx Ah A Aepfx Al Det Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Debelina robov: 0,2 – 12 mm Dimenzije obdelovanca: Širina min. 70 mm Višina min./maks. 8 / 42 mm Dolžina min. 160 mm (robovi v trakovih) Dolžina min. 60 mm (z role) Hitrost podajanja: 12 m/min Valj za nanašanje lepila Višina delovne površine: 880 mm Stisnjen zrak: 6 bar, 1/4 palca Priključek za odsesavanje: premer 160 mm Dimenzije stroja (D x Š x V): 5600 x 950 x 1300 mm Teža: pribl. 2200 kg Priključna moč: pribl. 11,5 kW, 400 V, 50 Hz Oprema: - Dvojni pritisk z električno nastavitvijo višine - Avtomatski hranilnik za robove z role, do premera 800 mm - Pnevmatične škarje za robove v trakovih, do debeline 3 mm - Avtomatska vodilna letev Predrezalna enota z 2 visokofrekvenčnimi motorji, 1,5 kW, 12.000 vrt/min Dvojna krožna žaga - 2 visokofrekvenčna motorja, 0,2 kW, 12.000 vrt/min 2 avtomatska položaja = 0 + 3 stopinje Enota za obdelavo robov z 2 visokofrekvenčnimi motorji, 0,7 kW, 12.000 vrt/min Enota za obdelavo ukrivljenih robov - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min Enota za zaokroževanje robov AR2 - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min, dvostopenjska, dotikalna Strgalna plošča Opomba o rabljenih strojih: • Pridržujemo si pravico do sprememb tehničnih podatkov in prodaje. Pedpfx Aohy Tlrsl Dogt • Navedene cene so cene ob prevzemu na našem lokalu – brezplačno natovarjanje! • Stroj je očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli jamstev. • Kupec ima možnost, da stroj pregleda na našem lokalu. • Posebni dogovori so možni le v pisni obliki. (Na povpraševanja bomo odgovorili le, če boste navedli svoj naslov in telefonsko številko!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Psdpfx Aog Nn E Nel Djgt Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Pgjdpjdd Hi Eofx Al Dst Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, prevoženi kilometri: 472 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, Tovornjak MAN TGS 33.510 BB 6x4 CH, podvozje, prvič registriran 05/2025, različica 33 ton, pogon 6x4, medosna razdalja 3,30 m, 510 KM, z pomožnim pogonom, klimatska naprava, hladilnik, vlečna kljuka, največja dovoljena masa vlaka 59 ton, itd. Nosilnost tovornjaka: 33 ton dovoljena skupna masa: 26.000 kg 28.000 kg dovoljena obremenitev skupaj, vertikalno, tehnična nadgradnja Plus izvedba: srednje visoka voznikova kabina TN, dolga, z 1 ležiščem in zadnjim oknom dizelski motor z močjo 375 kW (510 KM) in navorom 2.600 Nm, Euro 6 D pogon 6 x 4 medosna razdalja 3.300 mm, 800 mm preves zadaj zaklep diferenciala na zadnji osi menjalnik MAN TipMatic 12.28 OD pomožni pogon, povezan z menjalnikom, tip NH/4c, brez prirobnice, i=1,14, lokacija približno 2:30 visokozmogljiva motorna zavira MAN EVBec, stopenjsko nastavljiva funkcija menjalnika MAN EfficientRoll funkcija menjalnika za prosti tek menjalnik za povečano silo potiska pri vožnji funkcionalnost menjalnika MAN Idle Speed Driving način vožnje MAN TipMatic Performance in Efficiency, do 70.000 kg način vožnje MAN TipMatic Offroad, do 70.000 kg način vožnje MAN TipMatic Manoeuvre, način za manevriranje blokada proti nehotenemu speljevanju MAN EasyStart sistem za pomoč pri polnem zaviranju ABS, EBS, ASR, ESP sprednja in zadnja os z vzmetenjem iz listnih vzmeti sprednja os 9.500 kg, zadnja os 13.000 kg stabilizator na sprednji in zadnji osi prestavno razmerje i=3,63 vlečna kljuka ROCKINGER, tip 400 G 150A, s priključki za stisnjeni zrak, za vlečno breme do 40.000 kg, tehnična nadgradnja Plus 59.000 kg dovoljena največja dovoljena masa vlaka, tehnična nadgradnja Plus Climatronic tempomat multifunkcijski volan sončna letev strešno okno 2 LED delovni žarometa za voznikovo kabino 2 LED rotacijske luči na strehi kabine zadnje luči in dnevne luči LED 2 stranske obrobne luči in smerokazne luči LED priprava za kamero za vzvratno vožnjo izvlečni hladilnik v kabini električno nastavljiva in ogrevana zunanja ogledala električni pomik stekel Pgodjz Exf Rspfx Al Djt nadzorna plošča MAN EasyControl, 2 funkciji, upravljanje od zunaj pri odprtih vratih voznikov udoben sedež, zračni vzmetenje in ogrevanje, z ledveno oporo in prilagoditvijo naslonjal za ramena prevleke sedežev Comfort integracija pametnega telefona MAN SoundSystem MAN Mediasystem Advanced Navigation, 7 palcev Cena NETO, plus 19 % DDV. Z veseljem vam bomo posredovali ugodne možnosti financiranja. Vse informacije so podane brez jamstva. Pridržujemo si pravico do sprememb in napak. Notranja številka vozila: 2509

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: Minimum temperature: 1 °C Maximum temperature: 199 °C Electrical specification – Voltage/Frequency: 380 / 50 V/Hz Heating capacity: 1.8 kW (1800 Watts) Protection class: IP 54 Total power requirement: 16.2 kW Machine weight approx.: 0.93 t Dimensions (L x W x H): 2.85 x 2.0 x 1.4 m Pre-polymerization Tunnel – Heat Treatment Tunnel Pgsdpeu Nw E Uofx Al Det Application: Drying for washing and painting lines – continuous operation Sold as is and as described! Additional features: - Manufacturer's recommended maximum temperature: 80°C; safety setting: 90°C; heater: 230V - With chain conveyor/feeder line made of Teflon - Chain width: 200 mm - Maximum workpiece width: 150 mm Pass-through (W x H): 150 x 110 mm, conveyor height: 600 mm; drive: SEW Eurodrive motor (gear motor) output 0.18 kW Loading opening (W x H): 500 x 800 mm Discharge door (W x H): 600 x 1200 mm Access door (W x H): 800 x 980 mm with safety interlock Interior height: 1400 mm

Stanje: rabljeno, Technical Details: Grinding table: Tilt: none degrees Power supply: 220 V Approx. machine weight: 44 kg Space requirement approx.: 0.3 x 0.45 x 1.1 m Right disc: Ø 150 mm x W: 50 mm; disc equipped with abrasive flaps Left disc: Ø 125 mm x W: 50 mm; disc equipped with abrasive flaps Bilateral support Machine mounted on stand with base plate. Operation via on/off switch Psdpfxou Ng Sqo Al Djgt

Stanje: rabljeno, Technical details: Saw blade diameter: 420 mm Maximum cutting length: 5000 mm Cutting range (H x W): 180 x 100 mm Required air pressure: 6 bar Mitre cuts on both sides: 45° - 90° (manual) Operating voltage: 380 / 220 V Total power requirement: approx. 8.0 kW Machine weight: on request Machine dimensions (L x W x H): approx. 6.4 x 1.3 x 2.0 m Pgsdou Nigwspfx Al Det Circular saw with 2x sawing supports for cutting profiles with mitre cuts up to 45°. Microprocessor positioning control BECKHOFF E 70-300 with absolute encoder Digital display Travel distance per sawing support = 2350 mm, motorized Clamping cylinder for each horizontal and vertical axis, manual Spray device Hydropneumatic feed Use of carbide tipped saw blades

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Pedpfx Asvc Aklsl Djgt Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2001, Technical Details: Grinding length: 2,500 mm Grinding width: 800 mm Workpiece height: 800 mm Table movement horizontal, longitudinal stroke: 2,700 mm Table movement horizontal, cross stroke: 800 mm Table speed: longitudinal: 1 - 35 m/min / cross: 0 - 3 m/min Feed rate: vertical: 0.001 mm/stroke / cross: 0.0025 mm/stroke Magnetic chuck size: 2,500 x 800 mm automatic grinding wheel infeed: 0.001 mm Distance table to spindle center: 900 mm Grinding spindle speed: n/a rpm Grinding wheel dimensions: 400 x 76 x 127 mm Total power consumption: 36 kW Machine weight approx.: 13.5 t Machine dimensions (LxWxH): approx. 7.5 x 2.8 x 2.7 m Cooling system dimensions (LxWxH): 1.8 x 1.0 x 0.92 m Hydraulic system dimensions: 1,900 x 800 x 1,500 mm Transport dimensions machine (LxWxH): 8.0 x 2.4 x 2.85 m The machine is currently located in the technical department! Equipment: - Currently mounted grinding wheel = Ø 340 x 81 mm - Hydraulic unit - Dressing device Pedevbgr Rspfx Al Djgt - Separated working area (2-sided sliding door) - Machine interior lighting Accessories: Various grinding wheels Ø 400; Ø 310; Ø 300 as well as Ø 200 mm Various magnetic inserts and filter cartridges

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Rotary Table: Podpfou Id H Aox Al Dogt Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Best regards.

Stanje: rabljeno, Tehnične podrobnosti: Premer obdelovanca nad posteljo: 340 mm Premer obdelovanca nad podpijo: 190 mm Dolžina obdelovanca: 700 mm Razdalja med centri: 700 mm Število vrtljajev: 55–2350 vrt/min, 8 stopenj, mehanska nastavitev Premer vretena: 50 mm Nastavitev nosilca vretena: 120 mm Nosilec vretena: MK3 mm Navor na vretenu: 350 Nm Največja teža obdelovanca: 50 kg Skupna poraba moči: 3,0 kVA Teža stroja: približno 0,79 t Dimenzije stroja (približno D x Š x V): 1,6 x 0,9 x 1,4 m Stroj je bil redko v uporabi, v popravilni delavnici. 3-čeljustna glava Forkardt, premer 200 mm (zunanje vpenjanje) Pomik vzdolžne sani, X-os: 600 mm; pomik vzdolžno 0,045 – 0,787 mm pri 20 stopnjah; metrični navoj Pomik prečne sani, Y-os: 220 mm; pomik 0,023 – 0,406 mm pri 20 stopnjah Zgornja sana, nagib desno 60° in levo 120° Rezanje navojev Osvetlitev stroja Brez dovoda hladilne tekočine (pripravljeno za namestitev) Dodatna oprema: 3 kompleti vrtalnih glav Pgsdpfxju Ixw As Al Dst 3 x držalo orodja Multifix 2 x vrtalna glava 1 x vodilni konični nastavek 3 kosi strojne podlage

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: Swing diameter over bed: 460 mm Swing diameter over carriage: 388 mm Turning length: 1016 mm Centre distance: 1016 mm Centre height (measured in bed): 230 mm Swing diameter in gap: 640 mm Spindle bore: 52 mm Spindle speed range: 30 - 2000 / 12 steps rpm Feeds – longitudinal: 0.032 - 0.898 mm/rev Feeds – cross: 0.016 - 0.449 mm/rev Tailstock quill taper: MK 4 Tailstock quill travel: 120 mm Total power requirement: 3.75 kW Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.5 m Pgjdpju Ixzbefx Al Dst Switchable gear transmission 3-axis digital readout system Quantum Compound slide adjustment +/-90° Quick-change tool post Multifix 3-jaw chuck, Ø 200 mm Live centre in tailstock Thread cutting: inch threads, metric threads, trapezoidal threads, module threads Accessories: Change gears, machine feet, 1x fixed centre

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Swing diameter over bed: 1000 mm Pgjdpfx Alju Ix Aro Djt Swing diameter over saddle: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Length of gap: 800 mm Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Pgedpsu Ix D Asfx Al Dot Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: rabljeno, Leto izdelave: 2025, Tehnične podrobnosti: Pgsdpfx Ajy I Rr Tel Dst Prostornina: 1000 m³ Izkoristek v barih: 11 Skupna potrebna moč: - kW Prostornina posode: 1000 l Delovni tlak: 11 bar Dimenzije stroja, približno V x Š x G: 2,32 x 0,8 x 0,8 m Teža: 260 kg • Funkcija: Služi kot odziralnik in medij za shranjevanje v postajah za stisnjeni zrak, ločuje kondenzat in zmanjšuje pogostost vklapljanja kompresorja. • Standardi kakovosti: Izdelano v skladu z evropsko direktivo o tlačnih napravah (2014/68/EU) ali 2014/29/EU (enostavne tlačne posode) ter smernicami AD 2000. • Zaščita površine: Običajno je notranja in zunanja površina vroče pocinkana po standardu DIN EN ISO 1461 za maksimalno zaščito pred korozijo in dolgo življenjsko dobo. • Delovni parametri: Zasnovano za temperature od -10 °C do +50 °C (delno do +80 °C) in standardni delovni tlak 11 bar ter preizkusni tlak 16 bar. • Izvedba: stoječa izvedba z varjenimi vzdolžnimi in obodnimi varjenimi spoji.

Stanje: rabljeno, Technical details: Table length: 865 mm Table width: 780 mm Table height: 40 mm Pgsdou Nkn Ajpfx Al Dst Height above floor: approx. 815 mm Machine weight approx.: 140 kg Space requirement approx.: 0.87 x 0.8 x 0.82 m Marking-out plate – Surface plate Marking-out plate with 3 legs

Stanje: rabljeno, Technical details: Length: 640 mm Width: 465 mm Thickness of clamping plate: 90 mm Pgsdpfxeu Nkrns Al Dot Approximate machine weight: 70 kg Marking plate – Surface plate – Steel plate

Stanje: rabljeno, Technical details: Number of drawers: 6 units Tool holders: 36 units Dimensions HxWxD: 930x710x650 mm Weight: approx. 20 kg The cart is suitable for tool holders SK40 and/or SK50. Organize as you wish! Sale without tools shown in the pictures. Pgjdpfx Aou Nkylol Det As per illustration. *