Težka Valjčna Proga nakup rabljenega (962)

Stanje: rabljeno, Roll forming line Dreistern with accessories Machine bed specifications: Production direction: right to left 18 driven stations 1x 9.2 kW DC motor Roll forming stands, Type 1: Stand tooling width: 135 mm Working shaft diameter: 30 mm Working shaft drive: 20 mm with keyway Fixed bottom shaft Axial adjustment Adjustment range bottom shaft–top shaft (UW–OW): 60 - 100 mm Shaft spacing: 130 mm Roll forming stands, Type 2: Stand tooling width: 210 mm Working shaft diameter: 30 mm Working shaft drive: 20 mm with keyway Fixed bottom shaft Axial adjustment Adjustment range bottom shaft–top shaft (UW–OW): 80 - 130 mm Shaft spacing: 260 mm Scope of delivery: Machine bed Coil end welding device Entry table Straightening unit DC motor Control panel with operator interface Electrical documentation 2 piece straightening roll holders 3 piece gearbox 9 piece roll forming stand, Type 1 8 piece roll forming stand, Type 2 18 universal joint shafts The system was running flawlessly in production at the customer's facility until dismantling. Used decoilers and punching units are also available from us. For recommissioning the plant, we can support you with: Planning Itedpfoy Sm Sdsx Ab Ajg Mechanical overhaul Control retrofit Painting Safety concept CE documentation

Stanje: rabljeno, najv. debelina jeklene pločevine: 2 mm, skupna širina: 250 mm, Roll forming line Dreistern P3.100 with accessories Machine bed specifications: - Production direction: right to left - Axle spacing: 330 mm - 22 stations - 18 stations driven (18 gearboxes) - Quick-change plates - Mechanical quick-release clamps - Coolant/lubricant piping - 2 x 18.5 kW Bosch motors Roll former stand specifications: - Tool width per stand: 275 mm - Working shaft diameter: 50 mm - Working shaft connection: 30 mm with keyway - Fixed lower shaft - Axial adjustment - Adjustment range UW-OW: 80 – 170 mm Gearbox specifications: - Worm gear ratio 1:7.5 - UW-OW gear ratio 1:1 Scope of delivery: - Machine bed with gearbox support - Infeed table - Pneumatic measuring wheel unit - Special straightening device - 18 gearboxes - 18 roll forming stands - 2 Bosch motors - 36 cardan shafts The line operated flawlessly in production until dismantling at the customer’s facility. No control system included. We also offer decoilers and punching units as used equipment. The line can be extended with additional stations without any issues. Upon reinstallation, we can also support you with: - Planning Isdpfxoy Sm A Aj Ab Aetg - Mechanical overhaul - Control system construction - Painting - Safety concept - CE documentation

Stanje: rabljeno, najv. debelina jeklene pločevine: 2 mm, skupna širina: 250 mm, Dreistern P3.100 Roll Forming Line with Accessories Machine Bed Specifications: - Production direction: left to right - Axis distance: 330 mm - 18 stations - 16 driven stations (16 gearboxes) - Quick-change plates - Mechanical quick-release clamps - Coolant piping - 2 x 18.5 kW Bosch motors Roll Forming Frames: - Frame tool width: 275 mm - Working shaft diameter: 50 mm - Working shaft interface: 30 mm with keyway - Fixed lower shaft - Axial adjustment - Adjustment range lower/upper shaft: 80 – 170 mm Gearbox Specifications: - Worm gear ratio: 1:7.5 - Ratio lower/upper shaft: 1:1 Scope of Delivery: - Machine bed with gearbox mounts - Entry table - Pneumatic measuring wheel unit - Special straightener unit - 16 gearboxes - 16 roll forming frames - 2 Bosch motors - 32 universal joints Isdpfx Absy Sm Ape Ajtg Machine operated flawlessly in production until dismantling at the customer’s plant. No control system included. Uncoilers and punching presses are also available from us as used machines. The line can easily be expanded with additional stations. We can support you with the reinstallation of the line, including: - Planning - Mechanical overhaul - Control system engineering - Painting - Safety concept - CE documentation

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, številka stroja/vozila: 3roll 3500x140 mm prepinch, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: MG, model krmilnika: MG, število valjev: 3, premer spodnjega valja: 880 mm, premer zgornjega valja: 950 mm, premer stranskega valja: 880 mm, dolžina valja: 3.550 mm, delovna širina: 3.500 mm, delovna višina: 3.950 mm, najv. debelina pločevine: 140 mm, najv. debelina jeklene pločevine: 175 mm, skupna masa: 200.000 kg, skupna dolžina: 8.800 mm, skupna širina: 5.100 mm, skupna višina: 5.775 mm, moč: 200 kW (271,92 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, Hydraulische Blechbiegemaschine mit planetarer Anbiegepyramide und Vorbiegefunktion. Modell MG35140V, 3 Walzen, Kapazität 3500 x 140 mm Die Maschine wurde 2024 generalüberholt. Iedpfx Ajyzim Ajb Aetg Kapazität: Blechbreite: 3.500 mm Blechstärke: 140 mm Kapazitätsdiagramm siehe Anhang. Technische Daten: - Drei hydraulisch angetriebene Walzen, je Walze eigener Axialgetriebemotor - Synchronisierte hydraulische Walzendrehung mit stufenlos regelbarer Geschwindigkeit - Planetenkonstruktion mit hydraulischer Vorbiegefunktion - Kegelförmiges Biegen mit gehärtetem Kontrastpolster - Digitale Positionsanzeige der Biegewalzen - Walzen gelagert in zweireihigen Schwerlastlagern - Hydraulische Überlastsicherung aller 3 Walzen - Hochdruck-Hydraulikaggregat mit Mehrfachpumpenölversorgung - Zentral gesteuertes, fahrbares Bedienpult elektrisch mit Joysticks und Digitalanzeigen - Not-Aus inklusive Sicherheits-System rund um den Arbeitsbereich der Maschine Walzenlänge: 3.550 mm Oberwalze: 950 mm Durchmesser Seitenwalzen: 880 mm Durchmesser Elektrische Leistung Hydraulikeinheit: 2 x 100 PS (Hp), Spannung 380 V AC / 50 Hz Ausstattung & installierte Zubehörteile: - Gehärtete Oberfläche aller 3 Walzen - Kegelanbiegevorrichtung, Walzenneigung mit Gegenwalzentyp - Zentrales Bedienfeld elektrisch mit Richtungsjoysticks - Digitale Positionsanzeige der Biegewalzen - Not-Stopp und Sicherheitseinrichtungen CE-zertifiziert - Bedienungs- und Anleitungsbücher auf Englisch Abmessungen siehe Zeichnung im Anhang.

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 23.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 632025, TSCHUDIN T35 – CNC High-Precision Cylindrical Grinding Machine with Siemens Sinumerik 840D Year of manufacture: 2008 · Machine no.: 632025 · Approx. 23,600 spindle hours · Includes SECKLER production cell, STREULI filtration system, DITTEL balancing system TECHNICAL DATA • Manufacturer: HTT KELLENBERGER (now Hardinge / L. Kellenberger & Co. AG) • Model: Tschudin T35 / Siemens • Machine No.: 632025 (original nameplate) • Circuit diagram: E-632025 • Year of manufacture: 2008 • Control: Siemens Sinumerik 840D with grinding software • Travel: Z 600 mm / X 350 mm • Mains voltage: 3 × 400 VAC, 50 Hz • Control voltage: 24 VDC • Connected load: 16 kVA • Weight: approx. 6,400 kg • Spindle running time (machine ON): approx. 23,600 h • Centre width (machine class): up to 400 mm • Centre height: 175 mm • Max. workpiece weight: 150 kg • Grinding wheel diameter: 400 – 600 mm • Guideways: Hydrostatic • Max. cutting speed: up to 120 m/s (roller bearing variant) INTEGRATED AUTOMATION & AUXILIARY SYSTEMS • SECKLER robot magazine – autonomous production cell (robot loading, workpiece magazine, sorting belts for good parts/SPC/rejects) • DITTEL M5000 balancing system • STREULI filter system MZ 150 (year 2005, fine filtration) CONDITION & HIGHLIGHTS Used machine, fully operational • Siemens Sinumerik 840D with grinding software • Hydrostatic guideways – precision class • Autonomous SECKLER production cell • DITTEL M5000 balancing system integrated • STREULI MZ 150 coolant filtration system • Regular maintenance by Johnson Controls documented (last in 2024, next due 04/2025) • Removed from ongoing serial production of a precision parts manufacturer ABOUT THE MACHINE The Tschudin T35 is a modular production external cylindrical grinding machine for medium and large batch sizes. Originally developed by Swiss HTT Hauser Tripet Tschudin AG, now part of the Kellenberger/Hardinge group. The machine on offer was operated in conjunction with a complete SECKLER production cell – fully automated 24/7 operation possible. The Siemens Sinumerik 840D control is equipped with grinding software developed by grinding specialists and enables optimal programming of grinding and dressing processes. The hydrostatic guideways ensure highest precision in serial production; the roller bearing version allows cutting speeds up to 120 m/s. SCOPE OF DELIVERY • Tschudin T35 base machine with Siemens Sinumerik 840D • Complete SECKLER automation cell (including control cabinet) • DITTEL M5000 balancing system • STREULI MZ 150 coolant filtration system (year 2005) • Existing grinding wheel arbors LOCATION & TRANSPORT Location: Central warehouse, Köck auction house, 6178 Unterperfuss, Austria. Inspection before purchase highly recommended. Isdpfx Aey Eqiqob Ajtg All information without guarantee. Auction content is exclusively the article described. Used machine – sale excludes all warranties. Subject to errors and typographical mistakes.

Stanje: rabljeno, Tehnički detalji: Prečnik brušenja: 250 mm Dužina brušenja: 1000 mm maks. težina radnog komada: 300 kg Širina brusnog točka: 150 mm Dimenzije brusnog točka (prečnik x otvor x širina): 600 x 305 x 80 mm Širina točka (poravnat): 200 mm Osovina vretena: MK 5 Prihvat konjića MK: 5 Glava za brušenje može se okretati: 45° Opseg broja obrtaja: 1050/1240 o/min Uzdužni hod stola: min. 1 mm Brzina stola: 0,05-5 m/min Poprečni hod glave za brušenje: 415 mm Poprečni hod sa automatskim posmakom: 2 mm Dubina obrade pri brušenju: 0,15 mm Automatski posmak na preokretu stola: 0,005-0,05 mm Fini pomak pri brušenju: 0,0005-0,01 mm Automatski posmak kod ubodnog brušenja: 0,01-5 mm/min Brzo podešavanje glave za brušenje: 60 mm Motor brusnog vretena: 19 kW Itjdpjyzptiefx Ab Aeg Ukupna potrebna snaga: 22 kW Težina mašine cca: 5 t 1 polovna spoljašnja cilindrična brusilica TOS BH 25-1000 - potpuno funkcionalna, u dobrom tehničkom stanju.

Stanje: dober (rabljeno), Leto izdelave: 2017, dolžina transportnega traku: 7.100 mm, širina transportnega traku: 2.500 mm, Length: 7100 mm Width: 2500 mm Height: 900 mm Itjdpswq N Sdefx Ab Aeg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, dolžina transportnega traku: 7.100 mm, širina transportnega traku: 2.500 mm, Višina platforme: 900 mm Dolžina platforme: 7000 mm Širina platforme: 2400 mm Maksimalna obremenitev: 40.000 T Število osi: 2 Itsdpjxzz E Uefx Ab Ajg Število koles: 8 Dolžina: 7000 mm Širina: 2400 mm Višina: 900 mm Teža: 120.000 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, skupna masa: 2.900 kg, skupna dolžina: 1.800 mm, skupna širina: 1.900 mm, skupna višina: 2.200 mm, Valjčni stroj za profiliranje ROUNDO - R-4-S ID stroja: 9349 Iedpfx Aeycu E Eob Ajtg Proizvajalec: ROUNDO Tip: R-4-S Letnik: 1999 Dolžina: 1800 mm Širina: 1900 mm Višina: 2200 mm Teža: 2900 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Studer S30-1, letnik 1994 Ijdpfjy Rmxuex Ab Aetg

Stanje: zelo dobro (rabljeno), Popravilo izvedeno leta 2022. Obseg obdelave (swing) mm 400 Itjdpfoyzpycsx Ab Asg Razdalja med konicami mm 1000 Brusni kamen: premer x luknja x širina mm 500 x 80 x 203 Stožec v vretenu Morse 5 Največja teža obdelovanca med konicami kg 300 Obrati brusnega vretena r.p.m. 1720, 1980 Prečni pomik brusnega vretena mm 415 Moč motorja kW 9,5 Skupna vhodna moč kVA 16 Dimenzije stroja: dolžina mm 4890 širina mm 2320 Teža stroja kg 5150

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, višina središča: 180 mm, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 508 mm, premer brušenja: 350 mm, !!!POZOR, PRODAJA NA LOKACIJI V 74219 MÖCKMÜHL!!! Zunanja cilindrična brusilnica TACCELLA ELEKTRA Evo 1018 MPC Leto izdelave: 2008 Krmiljenje: Fanuc 21i Itodpfey N S Hnox Ab Aeg Maks. premer brušenja: 350 mm Maks. dolžina brušenja: 1.000 mm Oprema: - 2 brusilna vretena za ravno in poševno globinsko brušenje na eni osi - Vretenjak za brus ročno vrtljiv - Pripravljena za notranje brušenje - Pinola - Samodejni izravnalni sistem - Tipalni sistem za dolžino in premer obdelovanca - Senzor strukturnega zvoka - KSS sistem - Odsesovalnik oljne meglice Vključno z veliko brusnimi ploščami in dodatki

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1995, Funkcionalnost: nepreverjeno, Razdalja med središči: 650 mm ID / OD Dvoosni SONY digitalni prikazovalnik Rezervoar za hladilno tekočino Ijdpeyr Nn Hsfx Ab Aetg Več informacij na zahtevo.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, vrsta vhodnega toka: trifazni, skupna masa: 350 kg, vhodna napetost: 400 V, skupna dolžina: 500 mm, skupna širina: 520 mm, skupna višina: 1.200 mm, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, Stroj za deljenje in oblikovanje testa Stiskalnica za žemljice Record Polavtomatski, 36-delni Delilna glava NOVO obnovljena Novi noži iz nerjavečega jekla Vložek testa do 2100 g S 3 oblikovalnimi ploščami Priključek: 400V, 16A-CEE vtič Mere: 520 x 500 x 1200 mm (ŠxGxV) Rabljeni stroj, obnovljen Z jamstvom in servisom rezervnih delov Možnost: SAMO PRI NAS! Nova oblikovalna plošča Dostavna služba Podest iz nerjavečega jekla Iedeuav Itepfx Ab Astg Vzdrževalna pogodba Servisni paket E-Box Navodila in zagon Velika izbira stiskalnic za žemljice samo pri nas!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation Itodpfxefdkb Ts Ab Aeg - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) Itodpjmhhypsfx Ab Asg - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) Itedpfjmhh Dhex Ab Asg - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Iodpfx Aomhh Dzsb Aotg - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg Itjdpfx Aemhh Anjb Aeg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Ijdpfx Aoguk A Heb Aetg Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Itsdpfx Asguk Dkob Aog Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Isdpfx Abemhh Dts Aetg - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing Isdpfx Abeguk Dvo Ajtg - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2026, Polavtomatska stiskalnica za žemljice Record za enakomerno kakovost! Razdelilna glava, NA NOVO preoblikovana Novo rezilo iz nerjavečega jekla Enostavna, robustna tehnika! s tremi oblikovalnimi krožniki Le pri nas, preizkušeno po DGUV V3 Priključek 400V, vtikač 16A-CEE Mere: 520 x 500 x 1200 mm (ŠxGxV) Rabljeni stroj, obnovljen in preverjen s strani SAB z garancijo in storitvijo rezervnih delov Iodpfx Abey Ebkbs Astg Obiščite našo veliko razstavo!

Stanje: dober (rabljeno), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, Data: Itedsy Hdmzspfx Ab Ajg Centre distance: 300 mm Centre height: 150 mm External grinding spindle: 4.0 kW Grinding wheel max.: 400 x 80 x 127 mm Spindle taper: MT4 Workpiece headstock: 0.55 kW Workpiece speeds: 30 – 450 rpm Internal grinding spindle: 1.5 kW