Stiskalnica Za Briketiranje nakup rabljenega (89.877)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Sheet thickness: 0 mm Stroke rate: 80 strokes/min Total pressing force: 320 t Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lredevwgl Nepfx Aamsp Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Stanje: rabljeno, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 8 t, hod: 400 mm, tabela razdalj do bata: 400 mm, skupna masa: 96 kg, Ponujamo rabljeno rotacijsko stiskalnico Hahn+Kolb Gr. 3B, letnik 2024. Proizvajalec: Hahn+Kolb Lodpfx Aaoziaudemjrp Oznaka: Rotacijska stiskalnica Gr. 3B, z ročnim kolesom in ragljo, normalna tlačna sila 8 kN, največja razdalja med mizo in zobato letvijo ter hod bata 400 mm, masa 96 kg, barva vijoličasto modra RAL 5000 Letnik: 2024 Stanje: rabljeno Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Skladišče: Nattheim Lsdpfx Aevvkl Deamsrp

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Lrodpfxjy Egkgo Aamjp Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Hydraulic combined ironworker with two independent pistons, punching station with mechanical back gauge and adjustable piston stroke, notching, shearing of flat bars, round bars, and profiles with adjustable back gauge and automatic shear control, dual foot pedal, centralized lubrication system, working light. The machine is supplied with safety guards in compliance with CE regulations, CE conformity declaration, and operating manual. Applied force: 85 tons Motor power: 7.5 kW Dimensions: 1,920 x 950 x 2,040 mm (L x W x H) Weight: 2,315 kg PUNCHING: Punching capacity: Lodpfx Asggbt Sjamorp Ø 33 mm x 20 mm thickness Throat depth: 355 mm Punch stroke: 80 mm Working height: 1,080 mm SHEARING: Flat bars: 380 x 20 mm 480 x 15 mm Blade length: 482 mm Round bars: Ø 50 mm Square bars: 50 mm 90° angle profiles: 150 x 150 x 15 mm 45° angle profiles: 80 x 8 mm NOTCHING: Max thickness: 13 mm Width: 52 mm Depth: 100 mm Working height: 940 mm

Stanje: novo, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH, 20 TON CAPACITY Lsdpfx Aasrvz A Somerp Max Capacity: 20 tons Rapid Approach Speed: 1,700 mm/min Working Speed (slow): 440 mm/min Cylinder Stroke: 300 mm Cylinder Rod Diameter: 45 mm Rod End Thread: M14 Tank Capacity: 30 liters Maximum Pressure: 350 bar Voltage: 400 V Frequency: 50–60 Hz Motor Power: 1.5 kW Maximum Absorbed Current: 3.8 A Weight: 200 kg

Stanje: novo, New, available for immediate delivery while stock lasts. Hydraulic combined shear with 5 workstations: punching station with mechanical back gauge and adjustable piston stroke, notching, flat bar, round and profile cutting with adjustable back gauge and automatic cutting control, foot pedal, centralized lubrication system, work light. Machine supplied with safety guards in compliance with CE standards, CE declaration of conformity, and user manual. Applied force: 45 tons. Motor power: 4 kW. Dimensions: 1,450 x 900 x 1,450 mm (L x W x H). Weight: 1,215 kg PUNCHING: Punching capacity: Ø 22 mm x 15 mm thickness. Throat depth: 175 mm. Punch stroke: 50 mm. Working height: 935 mm. SHEARING: Flat bars: 200 x 15 mm. 300 x 12 mm. Blade length: 316 mm. Round bars: Ø 30 mm. Square bars: 45 mm. 90° angle profiles: 100 x 100 x 10 mm. 45° angle profiles: 70 x 70 x 6 mm. NOTCHING: Max thickness: 8 mm. Width: 35 mm. Lredpfsgygfvsx Aamsp Depth: 75 mm. Working height: 935 mm.

Stanje: novo, Electric Press Brake MVD Model S40. Bending length: 1250 mm. Pressing force: 40 tons CNC Control: ESA S630 Number of controlled axes: 4 (Y1-Y2-X-R) Maximum Y-axis stroke: 310 mm Lrodorp E A Tjpfx Aamsp Internal clearance: 500 mm Backgauge stroke: 750 mm Main motor power: 2 x 4.3 kW UNIMEC backgauge (Made in Italy) GIVI MISURE optical rulers (Made in Italy) Quick-release clamps, PROMECAM type Faster Shorter bending cycles Excellent bending results Lower maintenance and production costs Silent Reduced energy consumption

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Applied force: 65 tons. Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ledpfx Aaeggbuhomorp Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Lsdofh R N Dopfx Aamsrp Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: zelo dobro (rabljeno), Wood gluing press with feeder STETON PLA 2500x1300 – Made in Italy – CE certified, with operating manual – Year of manufacture: 1998 TECHNICAL SPECIFICATIONS: Shelf dimensions: 2500 x 1300 mm Six hydraulic cylinders, diameter: 85 mm Automatic glue spreader with pneumatic lift Four-section feeding table, with individual section adjustment Adjustable number of elements to be fed per section Minimum workpiece dimensions: 300 x 30 x 25 mm (LxWxT) Maximum workpiece dimensions: 2500 x 160 x 40 mm (LxWxT) Maximum shelf pressure: 260 bar Maximum side pressure: 120 bar Lrodpfxsh Tm A Ee Aamop Maximum back gauge pressure: 200 bar Total power: 11 kW Maximum temperature: 120°C Roller feed speed: 5–60 m/min Feeder feed speed: 0–40 m/min Speeds adjustable via inverter Roller outfeed table: 1400 x 2500 mm Seven hydraulic side cylinders Feeding belt conveyor: 1800 mm Electric shelf heating Cross feeding table: 2500 x 1400 mm Total length: 588 cm Total width: 497 cm Transport dimensions: 1000 x 230 x 220 cm Weight: 11 t

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.900 mm, skupna višina: 1.800 mm, skupna dolžina: 2.500 mm, premer briketa: 80 mm, skupna masa: 2.400 kg, vrsta vhodnega toka: trifazni, kapaciteta rezervoarja za olje: 600 l, – After technical inspection – Made in Italy – Year of manufacture: 2006 – Operating and Maintenance Manual (DTR) TECHNICAL SPECIFICATIONS: Lrodpfxsv T Uphe Aamsp – Briquette diameter: 80 mm – Maximum briquette length: 80 mm – Capacity: 350 kg/h – Motor power: 27.5 kW – Hydraulic compaction pressure: 1400 kg/cm² – Maximum working pressure: 150 bar – Oil capacity: 600 l – Hopper diameter: Ø 1200 mm – Hopper height: 90 cm – Dimensions (L/W/H): 2500 x 1900 x 1800 mm – Net weight: 2400 kg

Stanje: dober (rabljeno), Trivaljna upogljalna strojna naprava KNUTH KRM 12/2,5, št. 121008, letnik 2000, dolžina valja 125 cm. Ledpfxeznl Aqe Aamjrp

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, sesalna zmogljivost: 20.000 m³/h, proizvodna zmogljivost: 1.300 enota/h, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Kladivni mlin (letnik 2021) ima le približno 2 delovni uri! Linija je primerna za slamo, seno, lucerno, kompost, les in druge kmetijske surovine! TEHNIČNI PODATKI Kapaciteta (odvisno od materiala) maks.: 1.300 kg/h PODATKI O STROJIH Moč kladivnega mlina: 75 kW Peletirnica: 75 kW brez krmiljenja Razstavljalnik bal: 35 kW z vključenim krmiljenjem Kapaciteta filtrov za prah: 20.000 m³/h z vključenim krmiljenjem Delovne ure celotna linija: pribl. 1.500 h kladivni mlin: pribl. 2 h OPREMA Peletirnica Transportni trak Dvigalo Hladilnik za pelete z vibrirajočim sitom Zaloga posoda s praznenjem 2 ciklona z radialnim zapornim ventilom Ventilator za odsesavanje hladilnika Nova prstanasta matrica Razni rabljeni rezervni deli 10 m dovajalna miza za razstavljalnik bal Razstavljalnik bal z vključenim krmiljenjem Kladivni mlin z vključenim krmiljenjem Lrodozgf A Uopfx Aamsp Centrifugalni ločevalnik BigBag postaja za filter za prah Tehnologija odpraševanja: EU-ATEX Direktiva 2014/34 pozitivno poročilo o eksplozijski varnosti za prah iz leta 2023 Opomba: Linija je že demontirana in pripravljena za natovarjanje.

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: H 40, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.200 mm, skupna širina: 1.100 mm, skupna višina: 1.800 mm, temperatura: 120 °C, Pritisna stiskalnica za furnir 2200 x 1100 mm z ogrevanjem, pritisk prek ročne črpalke. Lsdpfxoyuva Uo Aamsrp

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, model krmilnika: 4 axis digital readout, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 370 mm, premer valja: 370 mm, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, delovna višina: 1.900 mm, najv. debelina pločevine: 40 mm, skupna masa: 15.000 kg, skupna dolžina: 5.300 mm, skupna širina: 2.100 mm, skupna višina: 2.400 mm, moč: 25 kW (33,99 KM), vhodna napetost: 380 V, število digitalnih zaslonov: 4, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 4-valjna pločevinasta preša Faccin model hidravlični 4HEL2,5 30/25, letnik 1999 Valjčno gibanje po linearnih vodilih širina pločevine: 2500 mm Debelina pločevine: 30 mm Zmogljivost valjanja: 2500 x 30 mm Lrodozd Sw Tspfx Aamop Predgibanje: 2500 x 25 mm Premer zgornjega valja: 370 mm Premer spodnjega valja: 350 mm Uporabna dolžina valjev: 2550 mm Napetost: 380 V / 50 Hz, vgrajena moč: 25 kW Nameščena konfiguracija Površina vseh 4 valjev je kaljena Konusno upogibanje pločevine Hidravlično odpiranje spuščenega konca Digitalni prikaz položaja valjev NC programabilni 4-osni sistem Električni kontrolni panel

Stanje: rabljeno, Uporabljena vročepressa Italpresse UT/6 za obdelavo z nanašanjem furnirja na ploščice iz lesnih vlaknenih plošč, večplastne materiale, MDF, masivno leseno ploščo ali plastične laminate, tudi za aluminij in druge kovine. Plošče preše so masivne plošče iz perforiranega jekla. Mere plošč: 3000 x 1300 mm. Maksimalna odprtina: 400 mm. Ogrevanje plošč s toplotnonosnim oljem in električnim grelnikom, opremljenim s črpalko za kroženje. Grelnik z močjo 27 kW - 380 V. Stikalo za izbiro uporabe 50 % moči grelnika (13,5 kW) v prvem položaju ali 27 kW v drugem položaju. Nastavitev časa stiskanja z avtomatskim odpiranjem. Maksimalni pritisk: 300 bar. Možnost izklopa 2 stranskih cilindrov preko nadzorne plošče. Lsdszkt Tijpfx Aamjrp Zaščitna folija Mylar na ploščah. Dimenzije stroja: 3700 x 1700 x V 2100 mm. Teža: 6600 kg. Stroj je v skladu z direktivo CE.

Stanje: skoraj kot novo (rabljeno), dolžina police: 3000 mm Ljdezlgm Sjpfx Aamorp širina police: 1300 mm razdalja med policami: 30 cm vodno ogrevanje 6 hidravličnih cilindrov varnostna sklopka

Stanje: novo, Stanje novo Dobavni rok pribl. 10 tednov od naročila Država izvora Turčija Cena 5.100 € Leasing obrok 98,43 € Dolžina upogibanja 1050 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo 2 mm Premer zgornjega valja 75 mm Moč motorja 1,5 kW Dolžina 1610 mm Širina 700 mm Višina 1160 mm Teža 385 kg 3 valji Asimetrična razporeditev valjev 2 pogonska valja z zavornim motorjem Nastavitev zadnjega valja z ročico z zaskočnikom Žlebovi za vstavljanje žice pri spodnjem in zadnjem valju Zgornji valj izklopljiv Desni/levi tek z dvojnim nožnim stikalom Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Ljdpjy Dvlkjfx Aamjrp IZBIRNO (CENA NA ZAHTEVO): kaljeni valji

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov po naročilu Država izvora: Turčija Cena: 7.000 € Leasing obrok: 135,1 € Dolžina upogibanja: 1.550 mm Najv. zmogljivost upogibanja – konstrukcijsko jeklo: 2 mm Premer zgornjega valja: 90 mm Hitrost valjanja: 6 m/min Ledpfewiqnkex Aamorp Moč motorja: 1,5 kW Dolžina: 2.130 mm Širina: 700 mm Višina: 1.200 mm Teža: 545 kg 3 valji Asimetrična postavitev valjev 2 gnan valja prek zavornega motorja Zadnja valja nastavljiva z ročnim kolescem Kanali za žico na spodnjem in zadnjem valju Zgornji valj izmetljiv Desno/levo vrtenje z dvojnim nožnim stikalom Naprava za konično valjanje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI (CENE NA ZAHTEVO): kaljeni valji motorizirano nastavljanje zadnjega valja digitalni prikazovalnik

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 350 mm, premer stranskega valja: 325 mm, premer valja: 350 mm, dolžina valja: 3.050 mm, delovna širina: 3.000 mm, delovna višina: 1.500 mm, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, maks. debelina pločevine iz nerjavečega jekla: 20 mm, skupna masa: 13.000 kg, skupna dolžina: 5.400 mm, skupna širina: 1.950 mm, skupna višina: 2.350 mm, moč: 25 kW (33,99 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, VALJČNI STROJ ZA UPLETANJE PLOČEVINE PINCH PIRAMIDA NA LINEARNIH VODILIH Zmogljivost upogibanja - Širina pločevine: 2500 mm - Debelina pločevine pri valjanju: 25 mm - Debelina pred-upogiba: 20 mm - Uporabna dolžina valjev: 2550 mm - Zgornji valj: Ø 350 mm - Stranska valja: Ø 325 mm Kaljena visokotrdnostna površina vseh treh valjev Vrtenje valjev poganja hidravlični motor z menjalnikom Stožčasto upogibanje z nastavitvijo hidravličnega naklona stranskih valjev Sistem za previjanje – zvarjene školjke zaobljenje Odpiranje – hidravlično nagibanje zgornjega valja s sprednjim padnim koncem Lodpfjzdk Tysx Aamjrp Elektromotorji 25 KM na hidravlični enoti, 380 V/50 Hz Digitalni prikazovalniki pozicije upogibnih valjev Priložena navodila za uporabo Dimenzije 5400 x 1950 x V 2350 mm – teža 13 ton

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold anodized platens Touch display control - Electric heating platens: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating platens: 2 pcs - Number of levels: 1 pc - Cylinder stroke: 350 mm - Opening height: 350 mm - Loading possible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic power unit requirement: 3 kW - Electric heating platens made of solid hard aluminum with integrated heating wires - Heating capacity: 22 kW - High-pressure insulating panels - Working temperature: 90°C - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz - Meets CE safety regulations Standard features: - Movement of the press table via rack-and-pinion and parallel guides on 2 corners of the press table made of self-lubricating material - Electronic control unit with touchscreen for machine control and monitoring - Digital timer for pressing time setting and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for pressing time selection - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety support for lower press table Integrated accessories: - Touch Screen TS/400 - EFC Electronic flatness control - Gold anodized heating platens (Busse) Location: Ex stock 54634 Bitburg Lredpfx Aaodx R Tfjmsp - Immediately available -

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Lredpoxgvwpofx Aamjp Lokacija: pri stranki - takoj na voljo -

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella case clamp with rapid traverse Technical Specifications: Lamella case clamp from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is infinitely adjustable electronically via 2 potentiometers and set via a frequency converter—thus, torque transmission is absolutely wear-free. - Pressing force for the horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Including options: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speeds 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45° carcasses. Simple operation via 6 separate push-buttons, freely selectable pressing time preselection with automatic opening, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Ljdpfx Ajy Egz Ssamerp Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller Lodpow Sgnksfx Aamerp - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term