Stefani (Scm Group) Dvojno. Format Edgegebander nakup rabljenega (8.748)

Stanje: rabljeno, Obdelovalni center SCM Tech Z2, glavno vreteno 8,5 kW, delovno območje 3050 x 1300 mm, nosilec orodij HSK-F63, 12 vertikalnih svedrov, 6 horizontalnih svedrov, programska oprema: SCM XILOG MAESTRO, delovne ure: 6500 h, letnik 2014, teža 3000 kg. Dcsdpjzxqi Rsfx Aahsl

Stanje: zelo dobro (rabljeno), Kanter SCM K360 HP Tekočine Predrezalniki, Ogrevanje plošče Predogrevalnik Nanakanje lepila z valjem, Zamenljiv rezervoar Ima iztok za lepilo Pnevmatična predrezalna gilotina, Tekočine Obrezovalne kroglice za končno obdelavo Agregat za rezanje zgornji/spodnji (multi rezalnik R1-R2), Agregat za obdelavo robov, Profilni kanter (multi R1-R2), Ravni kanter, Dcjdpfxjzwd Iko Aahjl Tekočine Polirni stroj Stroj ima nadzor s pomočjo numeričnega krmiljenja (NC) Maksimalna višina elementa 60 mm Maksimalna debelina furnirja na zvitku 3 mm, Hitrost podajanja 11 m/min Izvirna prevožena razdalja manj kot 30.000 metrov, po mojem mnenju je tehnično stanje zelo dobro Možnost pregleda in testiranja na licu mesta

Stanje: rabljeno, številka stroja/vozila: 008722, Delovno območje osi X: 3050 mm Delovno območje osi Y: 900 mm Moč glavne vretene: 5,6 kW Število nadzorovanih osi: 3 osi Dcsdpjztkb Ajfx Aahol Število vrtalnih vreten: 14

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Leto proizvodnje: 2013 Rezalna glava Delovno območje X: 3000 Delovno območje Y: 900 Delovno območje Z: 50 Ločene enote: 1 Navpično vrtalo: 12 Vodoravno vrtalo X: 4 Vodoravno vrtalo Y: 2 Žaga za utore: Da Stacionarna naprava: Da Sistem vpenjanja: primeži Zaščita: fotocelična Dsdpfx Aozxyfzoahscl Nadzorni sistem in programska oprema SCM XILOG Minimalne dimenzije: 3920x1170x2150

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), število rezil: 4, Stroj za gladanje površin SCM SF520, dolžina mize 2700 mm, 4 noži. Dodpfx Aozxbcbeahecl

Stanje: pripravljen za uporabo (rabljen), delovna širina: 240 mm delovna višina: 150 mm število glav: 5 Dedpfozxyctex Aahjcl razporeditev glav: spodaj/desno/levo/zgoraj/spodaj hitrost vreten: 6000 vrt/min premer vretena: 40 mm minimalna velikost glave: 100 mm maksimalna velikost glave: 200 mm moč motorjev: 3x 5,5 kW; 2x 4 kW; 2,2 kW valji, ki se pritiskajo s pnevmatičnim sistemom letnik proizvodnje: 2010

Stanje: rabljeno, Leto izdelave: 1995, Število trakov: 2, največ. Delovna širina: 920 mm, najmanjša delovna višina: 3 mm, največja delovna višina: 160 mm. Dsdpszxt Agofx Aahocl 1. Trak: Kalibracijski valj. Izvedba 1. valja: rebrast jekleni valj. Dolžina brusnega traku 1. agregata: 1525 mm. Širina brusnega traku 1. agregata: 930 mm. Hitrost brusnega traku 1. agregata: 16 m/s. 2. Trak: Kombinirani agregati. Izvedba 2. valja: rebrast gumijast valj. Brusni podstavek 2. agregata: fiksen. Dolžina brusnega traku 2. agregata: 1525 mm. Širina brusnega traku 2. agregata: 930 mm. Hitrost brusnega traku 2. agregata: 16 m/s. Naprava za merjenje debeline materiala: Da. Nastavljiva hitrost podajanja: 4,5 + 9 m/min. Nadzor: ročna upravljalna plošča, električna/pnevmatska. Niha traku: Da. Vhodna višina: spremenljiva (spodnja miza se premika). Gib mize: elektromotor. Kazalnik višine mize: mehanska številčna prikazava. Delovni tlak: 6 bar. Teža, pribl.: 1100 kg. Moč motorja: 11 kW. Premer sesalne odprtine: 200 mm. Lokacija skladišča:

Stanje: kot nova (razstavni stroj), Koda: N0556 Znamka: HAMMER - FELDER GROUP Model: N 3800 - v skladu s standardom CE Tračna žaga za rezanje lesa, plastike, kompozitnih materialov in različnih drugih materialov – v skladu s standardom CE Enofazni motor, 220 V – 1,5 kW Premer vztrajnika 380 mm Višina reza 310 mm Naklonjena lita železna miza –5/+45° Dimenzije mize 400 x 510 mm Valjčni vodniki nad in pod mizo Dcjdpfszqdymox Aahol Dolžina žage 3556 mm Dobavljene 2 žagini listi Navodila za uporabo Celotne dimenzije: 700 x 600 x 1700 mm (š x g x v)

Stanje: rabljeno, Leto izdelave: 2017, Stroj za obrobno lepljenje Proizvajalec: SCM Tip: Olimpic K360 T-ER1 Letnik: 2017 Tehnični podatki Dcjdpjzuyk Nsfx Aahel - Hitrost podajanja: 11 m/min - Debelina obrobe: 0,4 - 6 mm - Nadzorna plošča: SCM nadzorna plošča z zaslonom - Debelina plošče: 8 - 60 mm - Napetost: 400 V / 3~/50 Hz, 23 A - Min. dimenzije obdelovanca: 140 x 90 mm Agregati Predobdelava robov - 2 protismerno vrteči se diamantni rezalni noži (odstranjevanje do 3 mm) Agregat za nanašanje EVA lepila Območje pritiska z gnanim valjem + 2 pritiskalna valja Končna rezalna enota K-2 (ravna / poševna, samodejno preklapljanje) Obdelava robov v ravnini - v ravnini, zaokrožen rob, poševni rob Zaokroževanje vogalov R1/R2 Profilni + strgalni nož Agregat za poliranje Sistem za nanašanje antilepilne tekočine (2 tekočini), podajanje valja za obdelavo robov Opomba: Tehnični podatki in opisi so kopije potrdila naročila iz tistega časa. Podatki so namenjeni samo za informativne namene in niso zavezujoči.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Dcsdpfx Ajyftzksahol Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address & telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, CNC obdelovalni center Model Record 240 NT Letnik 2008 Dsdpfx Aaszx R Rzshscl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vrsta aktuacije: električni, Strigalni stroj SCM, širina 51 cm, električna nastavitev višine, 4 noži. Dedpfszxbb Rex Aahscl

Stanje: dober (rabljeno), Kód: 0321 Znamka: SCM Model: MULTIFLEX C - CE Standard Dcodpfxjytn U Io Aahsl Avtomatski delovni center za izdelavo okenskih okvirjev za čepovanje, profiliranje in konturiranje – maks. debelina obdelovanca 140 mm – CE standard Tehnični podatki Avtomatski voziček z zagozdilcem Maks. delovna dolžina: 2800 mm Min./maks. debelina obdelovanca: 30/140 mm Premer žage za odrezovanje koncev: 400 mm – motor 4 KM Uporabna dolžina čepilnega vretena: 320 mm – motor 10 KM Premer vretena: 50 mm Maks. premer orodja: 350 mm Profilirna vretena: 1. proticepilno profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm 2. profilirno vreteno – dolžina 320 mm – motor 7,5 KM – premer orodja 220 mm Min. in maks. premer orodij profilnih vret: 100/220 mm Premer profilnih vreten: 50 mm Orodna skupina: Zuani Spremenljiva hitrost pomika Skupina za vračanje zasteklitvenih letvic – motor 3 KM – premer odsesovalnega priključka 50 mm Skupne mere: 2400 x 3300 x 2000 mm (v x š x g) Teža: 2200 kg

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Dcjdexy Tmnjpfx Aahel Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: rabljeno, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested, we offer refurbishment services; please contact us. Dedpfxju U D N Uo Aahjcl

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood koda: AGG0014 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušena - Kompatibilen stroj: CNC SCM - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. Teža in dimenzije za transport: 3,5 kg, 36x26x21 cm Djdpfx Aovu Ahnjahjcl

Stanje: rabljeno, Wide Belt Sander SBF SATEFANI 2W126 - Machine in stock - Refurbished - Very good condition TECHNICAL DATA: - Maximum sanding width: 1100 mm Dodpfx Ajcvwf Tjahocl - Maximum workpiece height: 160 mm - Minimum workpiece thickness: 3 mm - Main motors: 2 x 11 kW - Feed motor: 2.2 kW - Height adjustment motor: 0.37 kW - 1 rubber roller 65 Shore, diameter 270 mm - 2 rubber rollers 45 Shore, diameter 400 mm - Two feed speed options - Pneumatic oscillation on limit switches - Suction port diameter: 2 x 150 mm - Belt in very good condition Machine dimensions: - Length: 280 cm - Width: 180 cm - Height: 250 cm - Weight: approx. 3000 kg

Stanje: rabljeno, SCM Tech 99L Machining Center Transport dimensions: Dedetxdqcjpfx Aahscl 4,800 x 2,300 x 2,600 mm – Weight: 2,800 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, KOMPAKTEN IN CELOVIT, na manj kot enem kvadratnem metru "easy cart" ponuja vse, kar potrebujete za upravljanje treh različnih lepilnih loncev. HITRA ZAMENJAVA PROCESA: v nekaj minutah je mogoče zamenjati lepilni lonec z drugim, ki ga je "easy cart" že ogrel, kar izboljša učinkovitost robilnika. SKLADIŠČENJE POLIURETANSKEGA LEPILA: ob koncu obdelave se lepilni lonci shranijo v vsebnik "easy cart". Inovativen sistem sušenja z zrakom omogoča shranjevanje 2 loncev s poliuretanskim lepilom brez težav najmanj 72 ur. Dcodpjqu N Efofx Aahol

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), največja širina rezanja: 1.270 mm, dolžina pomične mize: 3.800 mm, FORMATNA KROŽNA ŽAGA SCM MOD. SI 450 N - Voziček 3800 mm - Širina reza na vzporednem vodilu: 1270 mm Dodpfx Aajmzbm Rjhecl - Motor 7,5 kW - Leto izdelave 2006 CE - Serijska št.: AB/178069 - Priložen priročnik in CE deklaracija

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER) Dcodpfx Aasgwbbqohel

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 Dodpfx Aedz Uk Tsahscl No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a production line) Electronic control programmer Safe and soundproof housing – OPTIONAL No. 4+4 vertical columns for supporting working units Min. useful working width (mm): 150 (approx.) Max. useful working width (mm): 3100 (approx.) Max. useful working thickness (mm): 180 (approx.) Retractable stops, spacing (mm): 500 (approx.) Feed rate (min/max), steplessly adjustable (m/min): 8–40 (approx.) No. 8 workstations (for each side of the machine): 1 automatic scoring unit Dsdpfx Ajifz H Neahecl 1 milling/planing unit 1 universal milling unit (electro-pneumatic control) 1 universal milling unit 1 profile milling (copying) unit with 2 vertical motors 1 sanding unit (with grinding wheel) 1 sanding unit (with sanding paper)

Stanje: rabljeno, 7001481, 20 ADVANCED, MS Ultrasonic, ultrasonic generator Model: 7001481 Dcsdpfxst Txays Aahsl Type: 20 ADVANCED Condition: Used

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups Dcodpfx Aaod Rg Dpshsl No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW