Spandau Vijačna Črpalka 6,3 Kw Črpalke nakup rabljenega (37.302)

Leto izdelave: 2009, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 unit liquid ring vacuum pump. Please read the description carefully all the way to the end!! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it uses a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chrome-nickel steels are no longer sufficiently corrosion-resistant. Particularly when chloride-induced pitting and crevice corrosion, as well as stress corrosion cracking, are a concern. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Alloy 2.4605 is mainly used in the chemical industry, pulp and paper industry, as well as in flue gas desulphurization units. Outstanding resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, and especially to sulfuric/hydrochloric acid mixtures. Typical applications include: - Plant components for processes in organic chemistry with chloride-containing media, especially where chloride-based catalysts are used - Multipurpose plants in the chemical industry - Plant components in the fine chemicals and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuelled power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brines - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulfuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Model: LC 0220 A ZZO XX ZZ Volumetric flow: 195 m³/h Motor power: 7.5 kW Ledpfx Ajigqutsdlohg Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal refurbished by a specialist. Weight: 121 kg Dimensions: Length 960mm, Width 370mm, Height 370mm Connection: DN 50 (2")

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, število vrst polic: 10, Zaradi zaprtja našega žagarskega obrata prodajamo različne stroje in dodatno opremo (glej slike). Če vas zanima, nas prosim kontaktirajte. Lhedpfx Adoyi Erpsljg - Motor 45 kW za sekalnik - Dvostranska konzolna regalna polica, dolžina 15 m

Stanje: nepreverjeno (rabljeno), Manufacturer: Stork Lhsdpfsm Uc R Usx Adleg Capacity: 660 m³/h Motor: 160 kW

Leto izdelave: 1994, stanje: dober (rabljeno), Manufacturer: Boge Model: V LEX 45 Motor: 45 kW Capacity: 6.5 m³/min Lhodpfjhtq Dvjx Adleg

Leto izdelave: 2004, stanje: kot nova (razstavni stroj), Centrifugalna črpalka Vogel Spandau Pumpen model 3Mot.DB63.2370+140 Lsdpfxjkvnqqo Adlehg 230/400V 0,37 kW

Stanje: zelo dobro (rabljeno), Buderus 455 kW. Olje. Rezervno ogrevanje. Nizkotemperaturni kotel, možna tudi uporaba gorilnika na bioplin. Lodpfxjx U Exuj Adlshg

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, moč: 30 kW (40,79 KM), Manufacturer: KAESER Model: ASD 57 Motor: 30 kW Lodewtz E Uspfx Adlshg Capacity: 4.5 m³/h Year of manufacture: 2003 Operating hours: 29,900 h

Stanje: rabljeno, obratovalne ure: 48.000 h, Manufacturer: Alup Lodpfxeur N Tbe Adljhg Motor: 22 kW Output: 3.9 m³/min Loaded operating hours: 48,000 h

Stanje: rabljeno, Leto izdelave: 2015, Reciklačni sistem za pridobivanje in ločevanje plastike ter gumijastih izdelkov od tekstilnih ojačitev, kot so različne vrste gumijastih cevi, PVC, ponjave, transparenti in drugi plastični materiali s tekstilno ojačitvijo. Sistem deluje v povezavi z granulatorjem in separacijskim sistemom. Ura proizvodnje: 50 - 80 kg/h Dimenzije odprtine za dovod: 270 x 120 mm + Ø80 mm Dolžina rezil: 3x2 + 2x2 Premer rotorja: 250 mm Dolžina reza: 600 mm Moč motorja: 22 kW Dimenzije: 3200 x 3000 mm Lhjdewpkw Eepfx Adleg Višina: 2500 mm Teža: 1000 kg Leto proizvodnje: 2015 Tehnično stanje: rabljeni stroj, vsi motorji delujoči. Manjka zgornji pokrov za nalaganje izdelka z dimenzijami: 400x300 mm. Na voljo je popolna in originalna tehnična dokumentacija.

Stanje: zelo dobro (rabljeno), • Proizvajalec: ABUS KG – Nemčija • Tip: K-300 1-4 • Moč motorja: 3,8 kW • Napajanje: 400 V / 50 Hz • Opremljen z elektromagnetno zavoro – zavorni moment 90 Nm • Zobati gred – premer cca 34 mm • Pritrditev: kvadratni prirobnik • Robustna industrijska zasnova, namenjena delu v ABUS mostnih žerjavih in vitlih • Stanje: rabljen, delujoč (prave slike) Lhjdpfx Adsxbfutolsg

Stanje: zelo dobro (rabljeno), Flender geared motor MBH 125CC-B 27.7/1 Bevel helical geared motor 11 kW at 1400 rpm, 230/400 V, 50 Hz, IP 55 Operated with frequency converters Matching frequency converters from Walther Flender ZZ0103069.34003 Sinus Penta available Total of 15 geared motors and 12 frequency converters available! Very good condition, directly from production! Lhjdpfek E Htcex Adlsg

Stanje: rabljeno, Drilling capacity in steel (diameter): 10 mm Lhodpfsh Ra Nxsx Adlog Throat depth: 190 mm Drilling stroke: 65 mm Total power requirement: 0.5 kW Machine weight approx.: 0.05 t Space requirement approx.: 0.3 x 0.7 x 0.7 m Column diameter: 80 mm Machined base plate: Yes Table size: 300 x 250 mm Height adjustment: 0 - 280 mm Spindle speeds: 950 - 2000 rpm Older, very robust bench drill with T-slots in the machined base, drill chuck, and a clamping surface of (300 x 250 mm). Suitable for machining workpieces with a height of (1 mm - 260 mm) and a drilling depth of 65 mm, with a spindle throat of 190 mm. The machine is in good condition for its age.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Fuel: Natural gas (NG), Engine: HMG, Combined heat and power unit (CHP) for space heating: Yes, Condensing boiler: No, Auxiliary heater: No, Low-temperature boiler: No, B11 boiler: No, Combi-unit: No, Rated heat input P: 88 kW, Annual efficiency of space heating system η: 136%, Energy efficiency class: A++, usable heat output at rated heat input with auxiliary heater switched off/on: 87.9 kW, thermal efficiency at rated heat input with auxiliary heater switched off/on: 57.5%, electrical efficiency at CHP space heater output with auxiliary heater switched off/on: 33.5%, auxiliary power consumption at full / partial load el: 1.132 kW, standby power consumption P SB: 0.06 kW, standby heat loss P stby: 0.442 kW, annual energy consumption Q HE: 1345 kWh, indoor sound power level L WA: 72 dB, operating hours: 42,892 h. Water has been detected in the oil circuit; the unit displays a fault with the oil even though sufficient oil is present. Furthermore, the device shuts down with the message 'Engine too hot.' The control system was overhauled by the manufacturer in 2024; maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out regularly and documented. Lodexc Ni Ropfx Adlohg

Stanje: novo, Leto izdelave: 2024, moč: 20 kW (27,19 KM), Arbeitsbereich 3000×8000 mm X-Achse Verfahrgeschwindigkeit 110 m/min Y1-Achse Verfahrgeschwindigkeit 110 m/min Y2-Achse Verfahrgeschwindigkeit 40 m/min Wiederholgenauigkeit ±0,03 mm/m Lhsdpfxjnkaqlo Adlog Positioniergenauigkeit ±0,05 mm Maximale Verfahrgeschwindigkeit (Gleichlauf) 140 m/min Maximale Beschleunigung (Gleichlauf) 2G Maximale Tragfähigkeit 1000 kg

Stanje: novo, Leto izdelave: 2025, Laserski vir: Raycus ali Max: 4/6/8/12 kW Laserska glava: 3D BOCI Krmilni sistem: FSCUT 5000 A Vpenjalna glava: 20–450 mm Nakladanje/razkladanje: 12000 mm X-/Y-os Natančnost pozicioniranja: ±0,05/1000 mm Ponovljivost: ±0,03/1000 mm Pospešek: 0,8g (m/s²) Rotacijska hitrost: 60 obr/min Maks. pozicionirna hitrost: 60 m/min Lhodpji Apfzofx Adleg Maks. teža cevi: 1500 kg 1. Raycus 6000W laserski vir 2. Ozobljena (bevel) laserska glava 3. Varjen okvir DPL 4. Schneider električni elementi 5. Poševno zobati letev KH 6. Reducir Techmech 7. Yaskawa servomotor 8. Vodila SHAC 9. Integrirano krmiljenje napajanja 10. Programska oprema FScut 5000 11. Integrirana električna omara 12. HANLI hladilnik vode 13. Konzolna MOSTNA os-X FHBS 14. Avtomatsko zbiranje odpadkov 15. Gosenični avtomatski zbiralnik obdelovancev 16. Avtomatski podpornik 17. Okvir za nalaganje 12000 mm 18. Okvir za razlaganje 12000 mm

Stanje: novo, Leto izdelave: 2024, Durchmesserbereich: 15–240 mm Beladelänge: 100–6000 mm Entladelänge: 350–3000 mm Beladekapazität: bis zu 300 kg Laserleistung: 1.500–6.000 W X/Y-Positioniergenauigkeit: ±0,03 mm/m X/Y-Wiederholgenauigkeit: ±0,02 mm/m Lhedpfjnkal Dsx Adlog Maximale Verfahrgeschwindigkeit: 113 m/min Maximale Beschleunigung: 0,65 G CNC-Steuerungssystem: FSCUT 5000 Zytkwovg EtherCAT-Bus Stromversorgung: 380 V, 50 Hz, Dreiphasenwechselstrom Leistungsaufnahme: Abhängig von der Laserleistung Schutzart der Stromversorgung: IP54

Leto izdelave: 2001, stanje: dober (rabljeno), 2 units of axially split volute casing pumps with motor and base plate. Last use: operated as turbine. !!! Characteristic curves as pump and turbine available as images !!! Manufacturer: KSB Model: Omega 350-360 A Flow rate: 1,728 m³/h Head: 32 m Speed: 1,450 rpm Year of manufacture: 2001 Turbine operation: Motor: VEM G21R 280 S4 Power: 75 kW at approx. 20 m head and 1,600 m³/h Voltage: 400 V Ledpfsd Nqi Rsx Adlehg Pump operation: Required shaft power: 177 kW Required electric motor: 200 kW NPSH value: 6.9 Efficiency: 85.28% Max. operating temperature: 140°C Speed sensor: Yes !! Price per unit !!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, nazivna moč: 1.300 kW (1.767,51 KM), vrtljajska hitrost (min.): 1.493 obr/min, največja hitrost vrtenja: 1.493 obr/min, vhodna napetost: 6.000 V, vhodna frekvenca: 50 Hz, skupna masa: 6.100 kg, 1 unit asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Lhodpfsv I Alyjx Adlog Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 V Current: 151.4 A Power factor (cosφ): 0.86 Insulation class: F Frequency: 50 Hz Protection class: IP55 Design: Foot-mounted (B3) Duty type: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air-cooled Shaft height: 500 mm

Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 4.500 h, Na prodaj imam 5 puhal Kaeser HB 950 z motorji 110 kW in 132 kW. Lodjv Rmkxjpfx Adljhg

Leto izdelave: 1993, stanje: rabljeno, Material: Standard steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Delivery rate: 14.5 m³/h Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Strokes: 326 1/min, Stroke length: 105 mm Ljdogb D Hiopfx Adljhg

Leto izdelave: 1990, stanje: rabljeno, Material: Mild steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Lodpogb D Irofx Adljhg Unladen weight: approx. 1500 kg Delivery rate: 14.4 m³/h Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Stroke rate: 326 1/min, Stroke length: 105 mm

Stanje: pripravljen za uporabo (rabljen), Črpalka Spandau Pumpen PS-9-350, serijska številka skladno s fotografijo, rabljena, normalni znaki uporabe, 100% delujoča, dobava skladno s fotografijami. POZOR: Stroške pakiranja in dostave prosimo povprašajte posebej! Lhjdpfx Adox Dwb Relog

Stanje: pripravljen za uporabo (rabljen), Vogel Spandau Pumpen PS 1556-530 potopna črpalka SN: 312413 - dolžina črpalke: 55 cm, rabljeno, dobro ohranjeno, 100% delujoče, dobava kot na slikah POZOR: Stroške pakiranja in pošiljanja prosimo povprašajte posebej! Lhsdpsx Dwhwofx Adljg

Stanje: dober (rabljeno), Balancer, machine balancer, spring balancer, cable balancer, weight compensator - Manufacturer: KW, Spring balancer type F2 with locking mechanism - Load capacity: 98–176 N Lhedpfx Aeir E S Ijdlsg - Cable extension: 1.9 m - Quantity: 2 spring balancers available - Price: per unit - Dimensions: 225/125/H340 mm - Net weight: 10.3 kg/unit

Stanje: novo, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 24 V, Lisec hardener pump for 20-litre drums, complete unit. Can be used for PS, but also for PU with paste-like hardener. Sold EXW from our warehouse in Hungary. Lsdpjwuq Ubjfx Adlohg