Skoda Težka Stružnica nakup rabljenega (3.541)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: Lredpemhh Dzofx Al Nok - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week Ledpfx Ajmhh Ansl Nerk - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. Lodoguk A Hspfx Al Nork According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Ljdpoguk Dkofx Al Nsrk Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Ledpfx Alemhh Dto Nsrk - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Lrodpfx Alsguk Dvs Nok - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 140 mm Turning length 615 mm Control C200-4D Spindle bore 65 mm Spindle speed 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides 1, 2 and 3 X-axis travel 110 mm Z-axis travel 360 mm Y-axis travel 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction 150 mm Slide travel Z-direction 600 mm Spindle speed 5,000 rpm B-axis, B-correction axis +/- 1° Tool turret – number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis 0.001° Total connected load 61 kW Machine weight approx. 6.5 t Lrodpfxewzynqj Al Nok Space requirement approx. 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with length from 500–3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading system BREUNING ILS-REX-7208, year 2007

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1372, stružna dolžina: 350 mm, potovalna razdalja osi X: 150 mm, pomik po osi Z: 250 mm, skupna višina: 2.300 mm, skupna dolžina: 4.000 mm, skupna širina: 2.000 mm, skupna masa: 3.000 kg, proizvajalec krmilnikov: MORI SEIKI, model krmilnika: MSC-518, število mest v zalogovniku orodij: 8, MORI SEIKI CL-20 B CNC stružnica - Obratovalna napetost: 400 V Frekvenca: 50 Hz Ljdoy Dcnljpfx Al Nerk Nazivni tok: 55 A Stroj je opremljen z 8-pozicijskim revolverskim držalom orodij in tričeljustnim vpenjalom, premer: 250 mm. Pozor: prevzem artikla je obvezen med 07. in 09.07.2026, natančen datum bo še dogovorjen. FCA D-71263 Weil der Stadt – naloženo na tovornjak.

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1578, stružna dolžina: 600 mm, potovalna razdalja osi X: 150 mm, pomik po osi Z: 350 mm, skupna višina: 2.000 mm, skupna dolžina: 4.000 mm, skupna širina: 2.000 mm, skupna masa: 5.000 kg, proizvajalec krmilnikov: MORI SEIKI, model krmilnika: MORIC-T 6 F, število mest v zalogovniku orodij: 10, Oprema: transportni trak za ostružke, CNC stružnica MORI SEIKI SL-15 Stroj je opremljen s konjičkom, 10-pozicijskim revolverjem za orodja ter trivojnimi čeljustmi, premer: 160 mm, poleg tega tudi s transportnim trakom za ostružke. Lsdpfx Asy Dcm Ijl Nsrk Pozor: izdelek mora biti obvezno prevzet med 07. in 09.07.2026 na še dogovorjen datum. FCA D-71263 Weil der Stadt – naloženo na tovornjak.

Stanje: rabljeno, Leto izdelave: 2021, stružna dolžina: 320 mm, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 200 obr/min, premer struženja: 32 mm, izvrtina vretena: 39 mm, skupna masa: 2.900 kg, največja hitrost vrtenja: 8.000 obr/min, vrsta vhodnega toka: trifazni, prehod palice: 39 mm, moč: 13,2 kW (17,95 KM), Ponujamo ta rabljeni avtomatski stružni stroj CITIZEN L32-1M10, izdelan leta 2021. Model: L32-1M10 Serijska številka: V36540 Proizvodna številka: L32A/2251 Datum izdelave: 2021-11 Skupni obremenitveni tok: 36 A Nazivna moč: 13,2 kVA Kratkostična prekinjevalna zmogljivost: 2,5 kA Lrsdey Em Dyjpfx Al Njk Masa: 2900 kg Za dodatna vprašanja ali informacije nam pišite ali nas pokličite po telefonu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 320 mm, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 200 obr/min, premer struženja: 32 mm, izvrtina vretena: 39 mm, skupna masa: 2.850 kg, največja hitrost vrtenja: 8.000 obr/min, vrtljajska hitrost (min.): 8.000 obr/min, vrsta vhodnega toka: trifazni, prehod palice: 39 mm, Prostorske zahteve: pribl. 2,5 x 1,4 x 1,75 + FMB m CNC dolžinsko struženje: Citizen L32-1M8, letnik 2018, z avtomatskim podajalnikom FMB turbo 3-36 in transportnim trakom za ostružke z ničelnimi urami delovanja. Lrjdpfxoy Emnfs Al Nsk Funkcija LFV: nima ON/OFF: 5.465 ur (na dan 22.04.2026) Obratovalne ure: 32.110 ur (na dan 22.04.2026)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: Višina konic: 110 mm Razdalja med konicama: 160 mm Premer vretena: 23 mm Moč motorja: 1,7 kW Število obratov nastavljivo s potenciometrom: ca. 100 – 2.300 obr./min 3 predizbrane hitrosti oz. 3 prestavne stopnje . Obseg dobave, stroj z: Ljdpfx Aljy Egmhe Nork Načini delovanja: ročni + avtomatski Pnevmatska vpenjalna naprava Nagibni zadnji konjiček z 2 tulecama za vpenjalne čeljusti K12, s preklopnim stikalom Ročna prečna podpora s 4 mejami, sestavljena iz prečne in vzdolžne podpore .

Stanje: dober (rabljeno), Premer struženja nad ležiščem: 280 mm Premer struženja nad suportom: 170 mm Dolžina struženja: 600 mm Teža stroja ca.: 400 kg Premer vretena: 26 mm Hitrosti vrtenja: 55-2000 min⁻¹ Skupna potrebna moč: 1,4 kW Zahtevan prostor ca.: 1,5 x 0,8 x 1,3 m Ljdeyz Dg Repfx Al Nerk Vključuje brusilni suport EMCO SOD Vključuje 4-čeljustno stružno glavo EMCO Vključuje strojne noge Vključuje menjalna kolesa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 14.553 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ML0405-000122, izvrtina vretena: 51 mm, največja hitrost vretena: 6.000 obr/min, prehod palice: 51 mm, Premer palice (maks.): 51 mm, Oprema: dokumentacija / priročnik, Zraven stružnice se prodaja tudi podajalec TOP AUTOMAZIONI FU350SX, letnik 2020. Cena je za komplet. Ljdpfx Aoyym Smol Nerk

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 530 mm, izvrtina vretena: 90 mm, premer struženja: 920 mm, Stružnica tipa WMW DLZ 800 III naprodaj. S Heidenhain digitalnim prikazovalnikom. Stroj deluje brezhibno in je bil zelo malo rabljen (le za vzdrževanje). Vključno s čelno ploščo, 2x luneto, nekaj kasetami in navodili za uporabo. - Heidenhain digitalni prikazovalnik - Dolžina struženja 3150 mm - Teža cca. 7300 kg - Moč 13/20 kW - 380 V - Obseg obdelave nad posteljo 800 mm - Obseg obdelave nad izrezom 920 mm - Obseg obdelave nad vozičkom 530 mm - Premer vretena 90 mm - Konjiček MK-6 Nakladanje z viličarjem. Po dogovoru je možna dostava. Za vprašanja smo vam vedno na voljo. Ledpfx Aey Ar Niel Njrk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 16.700 h, Funkcionalnost: popolnoma funkcionalen, Traub TNL 20 – 9B Lredpey Am Nkefx Al Nek Year of manufacture: 2022 Control: TX8i-s (with Polyform / Helical / 19" multitouch with gesture control) Switchable operation: Can be used as short or long turning lathe Main spindle D20 (with 10,000 rpm) with C-axis Counter spindle D20 with X/Z/C-axis Upper tool carrier X/Y/Z/H/B-axis with 8 tool stations Lower tool carrier X/Y/Z/H-axis with 8 tool stations Back-working attachment with 4 tool stations Coolant mist extraction and filtration system Automatic CO2 fire suppression system Precision package Tool breakage monitoring device (upper tool carrier) Tool breakage monitoring device (lower tool carrier) Hinged belt chip conveyor Coolant system with 20 to 80 bar pump FMB Turbo 2-20 bar feeder Movable bar feeder system Portal-type part removal unit Workpiece conveyor belt A comprehensive set of tools is included. Linear axes: 1) X1 Upper turret 2) V1 Upper turret 3) X2 Lower turret 4) Z2 Lower turret 5) Z1 Pickup spindle 6) X4 Back-working unit 7) Z4 Back-working unit Rotational axes: 8) C1 Pickup spindle 9) C2 Main spindle Swivel axes: 10) B Upper turret support unit 11) H1 Upper turret 12) H2 Lower turret Part removal unit: 13) Z5 Lateral movement 14) X5 Rotation Because Traub counts the linear and rotary axes first, the machine is designated TNL20-9 with the suffix B for the swiveling upper tool carrier. Please see attached schematic from the user manual showing all axes. As is customary with Traub, the machine is provided with every available accessory. If you are looking for the all-in-one solution, this is it! Please only inquire if you are seriously interested in the machine. Thank you.

Stanje: rabljeno, Leto izdelave: 2001, Condition: used Year of manufacture: 2001 Stock number: 010191 Delivery time: prompt, subject to prior sale Country of origin: Germany Price: €24,500 Available: 1 Swing diameter over bed: 320 mm Distance between centers: 650 mm Center height: 160 mm Spindle bore: 40 mm Swing diameter over cross slide: 192 mm Bed width: 205 mm Spindle mount / DIN 55027: 5 Spindle taper: 5 MT Number of spindle speeds: 16 Spindle speed range: 48 – 2,500 rpm Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Metric thread range: 0.25 – 8 mm Inch thread range: 80 – 2 TPI Module thread range: 0.2 – 4 DP thread range: 200 – 5 Cross slide travel: 150 mm Top slide travel: 100 mm Tailstock quill diameter: 40 mm Tailstock taper: 3 MT Tailstock quill travel: 85 mm Motor: 2.4 / 3 kW Length: 1,582 mm Width: 715 mm Height: 1,245 mm Weight: 720 kg 3-axis digital readout Heidenhain NEW Röhm 3-jaw chuck, 160 mm diameter with internal and external jaws Quick-change tool post with 1 rectangular and 1 round tool holder Ljdpfxjyxxygj Al Nsrk Quick-action collet chuck with collets from 3 – 30.5 mm diameter Live centers Drill chuck Chuck guard Lead screw and feed shaft protection cover Motor brake Coolant system Machine feet Operating manual in German with CE Declaration of Conformity

Stanje: rabljeno, Leto izdelave: 2011, Condition: used Year of manufacture: 2011 Stock number: 010192 Delivery time: prompt, subject to prior sale Country of origin: Germany Price: €26,700 In stock: 1 Swing diameter over bed: 320 mm Distance between centers: 650 mm Center height: 160 mm Spindle bore: 40 mm Swing diameter over cross slide: 192 mm Bed width: 205 mm Spindle mount / DIN55027: Size 5 Spindle taper: 5 MT Number of spindle speeds: 16 Spindle speed range: 48 - 2,500 rpm Lsdpfx Alsyxxyaj Nsrk Number of feeds: 24 Longitudinal feed: 0.02 - 0.63 mm/rev Cross feed: 0.006 - 0.2 mm/rev Metric thread range: 0.25 - 8 mm Inch thread range: 80 - 2 TPI Module thread range: 0.2 - 4 DP thread range: 200 - 5 Cross slide travel: 150 mm Top slide travel: 100 mm Tailstock quill diameter: 40 mm Tailstock taper: 3 MT Tailstock quill travel: 85 mm Motor: 2.4 / 3 kW Length: 1,582 mm Width: 715 mm Height: 1,245 mm Weight: 720 kg 3-axis digital readout Heidenhain NEW Röhm 3-jaw chuck diameter 160 mm, with internal and external jaws Quick-change tool holder with 1 rectangular insert and 1 round insert Quick-action collet chuck with collets from 3 - 29 mm (in 1 mm increments) Live center Drill chuck Chuck guard Leadscrew and feedscrew guard cover Motor brake Coolant system Machine feet Operating manual in German with CE Declaration of Conformity

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 690 mm, izvrtina vretena: 155 mm, premer struženja: 1.090 mm, višina središča: 500 mm, širina na sredini: 700 mm, stružna dolžina: 3.000 mm, Vzporedni stružnica ZMM-SIBIMEX CU 1000/3000 Leto izdelave: 2007 CE certifikat Odlično splošno stanje Višina konic: 500 mm Uporabna dolžina struženja: 3000 mm Stružni premer nad posteljo: 1090 mm Stružni premer nad vozičkom: 690 mm Stružni premer brez izreza: 1250 mm Lrjdeylazwepfx Al Njk Prehod palice: 155 mm Širina postelje: 700 mm Moč motorja: 22 kW Teža cca: 8000 kg Število hitrosti: 24 Obrati vretena: 6,3 - 1250 rpm Območje hitrosti Stroj kompleten s fiksno in premično luneto Samocentrirna glava Štirivpenjalna plošča Motorizirana konica Elbo prikazovalnik osi Hitri pomiki za napredovanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 150 mm, premer struženja: 190 mm, izvrtina vretena: 52 mm, največja hitrost vretena: 5.000 obr/min, moč: 44 kW (59,82 KM), Oprema: dokumentacija / priročnik, Basic machine configuration: 2x TAKAMAZ tool turrets with 12 stations / servo motor swivel drive Independent drive for driven tools C-axis control 60° slant bed machine frame Air blow for chuck cleaning on both spindles Hardened and precision-ground guideways Work area lighting 3-color signal lamp Control panel Electronic handwheel Single set control with handwheel Standard tool package Bar feeder interface CE declaration of conformity, manuals Clamping system: Hydraulic hollow clamping cylinders Main spindle 1 pc. HAINBUCH collet chuck size 52 SPANNTOP Axfix system, incl. quick-change device 1 pc. HAINBUCH collet chuck size 52 SPANNTOP Axfix system High pressure unit: Büchele SFB 100 high pressure unit 65 bar, 20l/min, 2-way valve switching. Fire protection system: Kraft und Bauer CO2 extinguishing system with fire protection flap, pressure relief flap Bar feeder: Top Automazioni Fusion 350M LTA extraction unit Lrsdpfx Alsth Udij Nsk Chip conveyor Roller head LMT-Fette: F4-1RN with holder Special equipment: Pneumatic ejector and flushing in sub spindle Manual Guide Air blow on both spindles Chip conveyor, discharge to the right Parts tray, conveyor belt discharge to the right Helical interpolation Polar coordinates and cylindrical interpolation Tool presetter Automatic shut-off Tool breakage monitoring - Tool Monitor Long parts removal through sub spindle CCS Chip Control System

Stanje: dober (rabljeno), Delovno območje Višina konic: 375 mm Razdalja med konicama: 3000 mm Lrodpfx Aoy A H T Aol Nok Maks. premer struženja nad ležiščem: 750 mm Maks. premer struženja nad sani: 200 - 230 mm Hitrosti vretena: 20 - 1000 vrt./min. Moč pogonskega motorja: 7,5 - 11 kW Teža pribl.: pribl. 3800 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, višina struženja: 2.000 mm, premer struženja: 5.000 mm, premer čelne plošče: 2.500 mm, premer vrtljive mize: 2.500 mm, skupna masa: 38.000 kg, Stroj je priključen na elektriko, po modernizaciji leta 2008, ogled in preizkus sta možna po predhodnem dogovoru. CNC sistem Siemens Sinumerik. Ledpjy Ef A Iefx Al Nork

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2013, obratovalne ure: 23.758 h, številka stroja/vozila: AZ 0170, Very well-maintained and well-preserved CNC lathe SPINNER TC 300-52 SMCY in good condition! ● Terms of delivery: Free loaded on truck ● Location: 57562 Herdorf, Germany ● Availability: Immediately, by arrangement. The exact pick-up date will be agreed upon together and bindingly scheduled. Loading will be carried out on that day by our local disassembly team. Please note that the date cannot be moved once confirmed. ● Payment terms: Advance payment by bank transfer ● Internal ref. no.: TM1 ● Under power for inspection: Yes ⚡️VIDEO: Coming soon Technical specifications: Working area: Max. swing diameter: approx. 300 mm Max. turning length: approx. 250 / 200 mm Max. turning diameter: approx. 400 mm Travel: Axis travel X/Z: 180 / -400 mm Axis travel Y: +40 / -40 mm Max. rapid traverse X/Z: 15 / 24 m/min MAIN SPINDLE 1: Max. speed: 5,000 rpm Chuck size: 210 mm Spindle bore: 52 mm Spindle power: 15 / 19 kW (Siemens + Fanuc) Torque: 96 / 121 Nm (Siemens + Fanuc) MAIN SPINDLE 2: Max. speed: 7,000 rpm Chuck size: 130 mm Spindle power: 6 / 8 kW Torque: 38 / 60 Nm TURRET: Number of tools: 12 Tool holder interface: VDI 25 Lrodpfsy E Rx Iox Al Nek Live tools: 12 Max. speed: 6,000 rpm Power: 3 / 4.6 kW (Siemens) 1 / 1.50 kW (Fanuc) Torque: 9.75 / 14.75 Nm (Siemens) 7 / 31.8 Nm (Fanuc) Scope of delivery: ● Available manuals/documentation ● Collet chuck (2 pieces, for main and sub spindle) ● Various collets and tool holders, consisting of: Collets Type 364 E W25 80-5 from Ø 3–22 mm (in 0.5 mm increments) 2 × Combination holders (internal and external cooling), Type EWS 17.2525TDX 105 3 × Collet holders EWS 31.2525 DTDX105 2 × Garant double holders axial Attention: ● The tool holders seen on the machine in the turret are explicitly not included in the scope of delivery! Dimensions & weights: ● Footprint L x W x H approx.: 2000 × 1600 × 2000 mm ● Weight approx.: 3,500 kg Note: Attached are some pictures of the bar feeder. This is not included in the scope of delivery and can be purchased separately by arrangement if interested. Additional information: ►On request, we can offer transportation to the destination ►The quoted price is net plus VAT ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗Sale is exclusively to business customers❗

Stanje: rabljeno, VIŠINA KONIC 800 MM RAZDALJA MED KONICAMA 3000 MM NAJVEČJI OBRATOVALNI PREMER NAD VODILI 1570 MM NAJVEČJI OBRATOVALNI PREMER NAD SANMI 1120 MM ŠIRINA POSTELJE 700 MM DOVOLJENA TEŽA MED KONICAMA 6000 KG HITROST VRETENA 8 - 350 o/min PREMER PREHODA DROGA 102 MM KONICA: PREMER PINOLE 135 MM, HOD 300 MM, KONEC KONICE 80 METRIC MOČ MOTORJA 25 HP PLATFORMA S 4 NEODVISNIMI ČELJUSTMI 1200 MM HEIDENHAIN 2-OSNI DIGITALNI PRIKAZOVALEC ŠKATLASTA REVOLVER GLAVA HITRI PREHODI ZAŠČITA VRETENA IN VODIL Ljdsrzt Haspfx Al Nork

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, CNC lathe with driven tools, part ejection blade, tool alignment eye for automatic tool setting, chip conveyor, and material feeder. Control system: OSP-P300L CNC with 15” color touchscreen Machine hours Power-on time: 65,458 h (as of 18.03.2026) NC operation time: 36,054 h Spindle rotation time: 19,533 h Cutting time: 16,582 h Power consumption: 33.1 kVA Maximum swing diameter: 480 mm Maximum machining diameter: 340 mm Maximum turning length: 785 mm Clamping: Collet + 10” hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103), 1x hard jaws (Schunk SHB-J 100), hydraulic through cylinder SS 1770, draw tube Main spindle: Spindle nose JIS A2-6, bore dia. 80 mm, integrated motor Speed range: 45 - 5,000 rpm Power/continuous duty: 22 kW / 15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 rpm Power/continuous duty: 11 kW / 7.5 kW Spindle nose dia. 140 mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6” hydraulic chuck B206-01, 3x set soft jaws (Schunk KM-WBL 62) Hydraulic through cylinder SS1243, draw tube Sub spindle traverse (NC axis W, stroke for W450): 595 mm Spring-loaded part ejector on sub spindle W axis overload monitoring (drive torque) Tailstock clamping (tailstock) in sub spindle Turret Number of tool stations: 12, static and live tools BMT60 (not VDI) Tool holder in: 25 x 25 mm Tool holder out: dia. 40 mm Ledpfx Alsy A N Hxo Nerk Driven tools Drive output: 7.1/4.1 kW Speed range: 45 – 6,000 rpm Rapid traverse Rapid traverse X and Z axes: 25/30 m/min C axis rapid traverse: 200 rpm Travel X axis: 260 mm Z axis: 510 mm Y axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3,330 mm (without feeder and conveyor) Depth: 1,800 mm Height: 2,250 mm Machine weight: 5,250 kg Accessories: - OSP-P300L Advanced One Touch CF-M-E set including: * Coordinate transformation function * Profile generation function * Advanced One Touch IGF * 3D machining process simulation * Overcut time control * Load monitoring (spindle, feed axes) * NC operation monitoring (incl. part counting) * Cycle time reduction function * Hi-Cut Pro function * Spindle speed control function - High-pressure cooling, max. 20 bar, max. 50 l/min - Material feeder ILS type MUK 7012, with bar magazine 6–70 mm/1,250 mm, year 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - Filtermist FX4002 extractor Machine equipment: - Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on main spindle) Collets for dia. (mm): 6–7–8–9–10–11–12–13–14–15–16–17–18–19–20–21–22–23–24–25–26–27–28 –29–30 31–32–34–35–36–38–39–40–41–42–44–45–46–48–50–51–53–55–57–60–64–6 5 Collets with keyway dia. (mm): 55–60–65 - Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on sub spindle) Collets for dia. (mm): 6–7–8–9–10–11–12–13–14–15–16–17–18–19–20–21–22–23–24–25–26–27–28 –30 31–32–34–35–36–39–38–40–41 - Holders: Axial holder - 5x; Toolholder - 5x; Parting blade holder - 2x; Double-face driven tool holder - 3x; Cross driven tool holder - 3x - Reducing bushing (made from bar stock) - Reducer – nylon dia. (mm): 12–14–15.5–17–20–22–24–26–28–30–31–34–36–38–40–42–44–47–50–52 06/2019 spindle repair due to defective bearings. 06/2025 U4 control unit replaced. 10/2025 M control unit replaced. Repairs performed by manufacturer (supplier) technicians, original parts used after overhaul.