Sistem Valjev Za Globoki Tisk In Potapljanje nakup rabljenega (134.646)

Stanje: zelo dobro (rabljeno), MDS Type: MDS A220-PD MDS A220-PD “Autoriv” manual workstation The A220-PD assembly system is a stationary manual workstation for processing press-in fasteners. Intended use: The machine is designed for pressing in fastening elements. The operator manually inserts the appropriate screws, plastic nuts, and the component to be processed into the machine. The operator then initiates the pressing process using a foot pedal. The pressing cycle runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in stud, punch stud / rivet stud Thread sizes: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not pre-wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Processed, water-free, and oil-free air Connection: 1⁄2'' thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values refer to a working height (WH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Version: Manufacturer FESTO Control unit: Standard: Manufacturer B&R Version: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: Operating modes can be changed via the control panel. Automatic mode: Press-in of fastening elements takes place in automatic mode. Movements are only triggered when the operator presses the foot pedal, initiating the pressing cycle. Csdpfx Aszgr I Reahjrg Manual mode: In manual mode, setup operations are performed on the machine. Movements can be triggered individually in this mode. Weight: approx. 600 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Leto izdelave: 1984, stanje: rabljeno, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective - Pneumatic-hydraulic press - Stroke: 50 mm Cjdod Hp Tzepfx Aahorg - Clear distance between columns: 850 mm - Table size: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg

Stanje: dober (rabljeno), Hydraulic press, bending machine, straightening machine, section straightening system, coil straightening machine, coil straightener, shaft straightening system, combined bending-straightening press, section bending machine, flat bar bender, horizontal bending/straightening press, horizontal bending machine - Hydraulic press: straightening system, straightening machine, section straightening system with roller conveyor Cjdovgu Haopfx Aahorg - Pressing force: 10 tons - Pressure: max. 100 bar - Roller conveyors: 2x 1000/170/H1110 mm / Rollers Ø 56 x 140 mm - Transport dimensions: 1335/1220/H1470 mm - Weight: 807 kg

Stanje: zelo dobro (rabljeno), Shot blasting machine, continuous blasting machine, wear plates, blast wheel disc -Spare and wear parts: for shot blasting machine, continuous blasting machine -Impact plates: 02122 V105, 7 pieces, dimensions 390/125/H145 mm, 11.7 kg/pc -Impact plates: C1315 N517, 2 pieces, dimensions 480/140/H175 mm, 15 kg/pc -Blast wheel discs: 02122 V105, 16 pieces, dimensions 350 x 80 mm, total 112.5 kg -Accelerator gear units: 4 pcs, Ø 250 x 320 mm, 27 kg/pc Cjdpfswaiv Ujx Aahjrg -Conveyor shafts: 3 pieces, Ø 80 x 1640 mm, 40 kg/pc -Sale/Price: complete package -Total weight: 452.4 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 90 t, teža bale: 700 kg, vrsta vhodnega toka: trifazni, skupna širina: 220 mm, skupna višina: 240 mm, skupna masa: 23.000 kg, skupna dolžina: 1.142 mm, širina odprtine za polnjenje: 90 mm, dolžina polnilne odprtine: 140 mm, širina bale: 80 mm, dolžina bale: 1.200 mm, višina bale: 110 mm, kapaciteta rezervoarja: 1.100 l, leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, Paal Licon 250 SC Channel Baler Designed for baling non-ferrous scrap, for the last 12 years it has been operating at a packaging plant. Credpfxsxdnn Io Aahjg It processed 700-800t of cardboard monthly. Machine dimensions: Length: 1142 cm Width: 220 cm Pressing force: 80t Channel (bale) dimensions: 110 x 80 cm Feed opening: 140 x 90 cm Machine weight: 23t Dual high-efficiency cooling, suitable for 24/7 operation in a warm production hall. Floor recently overhauled, currently fitted with a six-month-old main ram/cylinder. Cutting knives replaced and modified for faster, more efficient operation. In 2025: hydraulic oil changed and valve blocks serviced, new rollers for the entire main ram/platen. Press ram reconditioned. Many spare parts available. Machine equipped with modernized electronics and controls from 2018, fully operational and ready for immediate use. Operated from a touchscreen display. Detailed photographic documentation of the machine’s disassembly available. Complete technical documentation (in Polish) and electrical schematics included. Machine can be tested on-site. Additionally available: - Roller bale take-off with conveyors, tipper, scale, and bale storage as shown in the photos Or optionally: - Bin lift/tipper for emptying 1100L or 660L bins - PAAL KES1750 chain channel conveyor, 1750 mm width, 8 m horizontal section, 8 m inclined section

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET rivet punch system. Includes rivet punch pliers Model: 9524-640-826-7 Credpfx Aajzgaanohsg Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Pliers weight: approx. 195 kg Type: 9524-640-826-7 The system was tested by the manufacturer and is fully functional. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET self-pierce riveting system. Including rivet setting pliers Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V With Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Max. permissible riveting pressure: 250 bar Max. permissible setting force: 78 kN Weight of setting pliers: approx. 279 kg Year of manufacture: 2012 Type: 9524-640-824-5 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) Cedpezgaabofx Aaherg (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Codpfx Aju Id H Aeahjrg Rotary Table: Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Best regards.

Leto izdelave: 1998, stanje: rabljeno, Temperature: 200-210 °C Conveyor Speed: 1000 mm/min Max. Workpiece Length: 200 mm Total Power Requirement: 50 kW Machine Weight approx.: 2.0 t Convection Reflow Soldering System for Printed Circuit Boards Soldering system for printed circuit boards (e.g. SMD and/or mixed technology) and for curing SMD adhesives. The soldering system operates with the following functions: Infeed - Preheat - Soldering - Cooling - Outfeed. - Equipped with software functions - Can be integrated into a production line Further technical specifications: - Shielding gas with nitrogen: 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical supply: 12 kW - Space requirement: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: Credpfx Aju Rwaueaheg - Automatic stacking unit LSB 03 with reloading head and discharge belt for accommodating, for example, printed circuit boards. - Machine is CE98 certified System suitable as a donor for spare parts or for conversion/expansion. Sale as is. Priced for quick sale.

Stanje: zelo dobro (rabljeno), Here we offer you a TOX Complete Punch Riveting System. TOX Complete Punch Riveting System Type TZ-VSN The punch rivet first pierces all joining partners and pushes the punched slug out of the joining area. With its innovative technology for complete punch riveting, TOX PRESSOTECHNIK, the specialist for sheet metal joints, enhances its product and service portfolio with a future-proof process. Crodpfozdn S Tjx Aaheg Complete punch riveting provides an additional mechanical sheet metal joint, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed universally, so that punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be flexibly processed both with TOX hand pliers and TOX robotic tongs. Type: TZ-VSN Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connections Power: 3.4 kW Electrical connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Power supply type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and error!) If you have further questions, we are happy to answer them by phone. Orders can also be placed in writing via email or fax.

Stanje: rabljeno, Dokumentacija Multievakuator Dodatne informacije Pnevmatski transportni trak. Sesalni način delovanja za praške ali granule. Enota Multievakuator je kombinacija puhala in ciklona, zasnovana za sesanje zrnastih materialov. Zgornji del, ki vsebuje tekač, se lahko odpre za enostavno čiščenje in zamenjavo košare ciklonskega filtra. Ventilator ustvari potreben vakuum za vleko materiala iz točke A in ga prek ciklona s pomočjo rotacijskega ventila izprazni v točko B, bodisi neposredno ali prek izpustne cevi. Kapaciteta +/- 5 t/h, odvisno od postavitve (glej dokument). Motor: 3 kW Možnost dobave rotacijskega ventila. Na voljo proti doplačilu. Crodpfozg Nakex Aahog

Leto izdelave: 2019, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za izsekavanje, vtiskovanje in dodelavo Kama ProCut 76 Foil s CPX postajo, v proizvodnji, takoj na voljo. Največji format pol: 760 x 600 mm. Največji izsekovalni format: 743 x 585 mm. Najmanjši format pol: 279 x 210 mm. Največja izsekovalna sila: 180 t. Največja hitrost*: 5.500 pol/h. Credjxzvamepfx Aahsg

Stanje: rabljeno, Electronic Crane Scale MWT Type 142 Serial No.: 142571 Year of manufacture: 1993 Tensile force measuring device, crane scale Measuring range: 2,500 to 80,000 kg Crsdpfxjg D H Rie Aahjg Minimum measurable value: 20 kg Power supply via 12 Volt battery - Suspension shackle for double hook, anchor hook - Operation, saving of measurement values, and tare via remote control - Storage for measurement values (weights) - Printer for measurement values Very robust and high-quality steel body Net weight: approx. 200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Št.: 11118. 2013 – Schmedt Präleg & Präform, stroji za vstavljanje in stiskanje knjižnih blagov. Uporabljajo se za vstavljanje različnih knjižnih blagov, od tanjših do debelejših, v mehke ali trde ovitke. Posebne značilnosti: • Izbira programa prek zaslona na dotik • Izjemno kratki čas nastavitve in razstavljanja • Samodejno čiščenje valjev za nanos lepila po vsaki knjigi • Navpično gibanje stranskih delov • Dva rezervoarja za hladno PVA lepilo Deluje v povezavi z: 2008 – Schmedt Präform 2100, stroj za stiskanje in oblikovanje povezave. Uporablja se za stiskanje različnih knjižnih blagov, od tanjših do debelejših, s trdimi ovitki, neposredno po vstavljanju. Primerno za posamezne ali različne knjige, stiskanje in oblikovanje povezave v enem samem postopku. Specifikacije, Praleg 18-60: Višina bloka: 80 – 450 mm Širina bloka: 110 – 450 mm Crsdozkgdzopfx Aahjg Debelina bloka: 2 – 80 mm Hitrost proizvodnje: približno 200 – 300 kosov/uro Specifikacije, PraForm 2100 Stroj za stiskanje knjig z rezalnikom za utore. Največji format: 420 x 520 x 100 mm Napajanje: 230 V + stisnjeni zrak.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 800 x 1350 mm Weight: 35 kg Total Power: 0 kW Bandsaw Set Machine RWM-1 - Maximum tooth set per side: up to 1 mm - Tooth set accuracy: ± 0.05 mm - Speed: up to 70 teeth per minute - Blade width: 15–100 mm - Tooth pitch: 8–50 mm - Tooth height: 5–15 mm - Blade thickness: up to 1.2 mm Crodev A Hdvspfx Aahjg - Including base frame - Weight: 35 kg

Stanje: rabljeno, KEG-naprava, proizvajalec M+F, tip: Micromat M 2/2, z eno postajo za notranje čiščenje in eno polnilno postajo, s posodo za čistilno sredstvo. Cedpfx Aaeyzhvijhjrg

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 101258050, Oddaja ponudbe zavezuje k pravočasnemu prevzemu do 31.12.2025! Ponudba vključuje: Bacciottini Pit Stop WFD2H Speed (serijska številka: WFD2H 1010, letnik: 2010) MB PFNET 52/4-40-ART52 (serijska številka: 101258050) Crsdpfxjxyh E Se Aahsg TEHNIČNI PODATKI Število žepov: 4 OPREMA 2-prečni sistem za biganje V liniji Podaljšan podajalnik MB zgibalni stroj Žep za oltarski pregib Izhod

Stanje: novo, Leto izdelave: 2026, Efficient, quiet, and powerful mechanical machine Csdpox Hyhbofx Aahsrg Technical specifications: Working length: 4040 mm Overall length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: 1 rail 20° with sharp nose, radius 1 mm, with offset, 66/24 mm for the clamping beam 1 insert rail, 10/100 mm and 24/100 mm for the folding beam Foot switch (the MAF 400/CNC model is supplied with a second foot switch) Soft start for the folding beam Electrically driven back gauge, 8-1000 mm Power cable, length 5 m, with 32 A mains plug (for EU market) Supply voltage: 3 x 400 V, 50 Hz (for EU market) CNC S-Touch control: From profile design to bending precision in record time Standard without extra charges: • Graphical display of bending sequences for the selected program • Graphical representation of sheet position before each bend • Operator guidance—in every work stage, explained interactively via the graphical control system • Programming without submenus • Direct profile correction by touching the relevant profile section • Programmable angle correction • Set repetitions for special radius bends • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lift height, closing edges • Profile search by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with high-resolution graphics • USB port for backup and program transfer • Permanent memory for over 3000 programs • Freely assignable program names (profile name) • Production quantity and machine operating time logging • 16 languages • Remote support (TeamViewer) • Soft start for folding beam • 6-1000 mm motorized back gauge • Foot switch For EU: • 16 A plug with 5 m power cable • For MAF and MAZ models: 32 A plug with 5 m power cable

Leto izdelave: 2007, stanje: rabljeno, Stiskalnica za ogrščico REINARTZ AP15, motor 45 kW, letnik 2007. Zmogljivost: 1 tona na uro (8.000 ton na leto). Na voljo imamo tudi drugo spremljevalno opremo za proizvodnjo olja. Crodpfszbyqwox Aaheg

Stanje: novo, Ostas Sickenmaschine KMRP 2.5 Vključuje 4 kompleta orodij Credpfxsytb I Uj Aaheg Lastnosti • Glavno ohišje iz jekla • Glavni motor z reduktorjem • Vretena z bronastimi ležaji • Nastavljiva spodnja gred • Posebne oblikovalne gredi • Premikanje spodnje gredi naprej in nazaj • Premična električna nožna pedala • S 4 nabori za profiliranje Tehnične specifikacije: • Dolžina vreten: 250 mm • Kapaciteta upogibanja: 2,5 mm • Premer valjev: 98 mm • Doseg: 160 mm • Hitrost motorja: 5 m/min • Motor: 1,5 kW • Dimenzije D-Š-V: 1400 x 550 x 1120 mm • Teža: 350 kg

Stanje: novo, Leto izdelave: 2025, najv. debelina jeklene pločevine: 4 mm, - Capacity 4 mm - Hydraulic roll adjustment - Foot switch - Brake motor - With 4 sets of rolls - Emergency stop - 400V Cedpfxogg Nq He Aahorg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, globina grla: 350 mm, premer valja: 90 mm, Najpomembnejše prednosti: tehnologija clinching brez zakovic – brez dodatnih povezovalnih elementov, nizki obratovalni stroški, hiter in ponovljiv postopek spajanja, intuitiven zaslon na dotik HMI, kompaktna in robustna konstrukcija, napajanje 230 V / 50 Hz, obratovalni tlak 6 bar, enostavno upravljanje in vzdrževanje, idealno za serijsko in delavniško proizvodnjo. Uporaba: prezračevanje in HVAC, kovinske ohišje, bela tehnika, avtomobilska industrija, nadzorne omare, Codpfxoy Rrcro Aahsrg proizvodnja komponent iz pločevine. Premer bata: 90 mm, globina vratu: 350 mm, razpon debelin pločevine (mehko jeklo): 2x 0,5-1,2 mm, tlak: 76 kN, napajanje: 230V zračni tlak: 6 BAR teža: 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Bihler RM 40E Punching and Bending Automation Machine Compact machine system for the production of punched and bent parts from strip and wire. Quick-change tooling system User-friendly machine and process control P CNC 4E Compatible with RM 35, RM 40, and RM 4 tools Condition: very good Manufacturer’s description, variations possible. You are purchasing the machine as shown in the pictures. Type: RM 40E No.: 27907 Year of manufacture: 2006 1x 184-01-0022.0 Base Machine RM 40 incl. central lubrication and pneumatic system incl. P-CNC 4E control Cjdsg Inzkjpfx Aahsrg According to installation diagram 184-00-0085.3 incl. Tool: 484 0027 2x 142-04-0347.0 Wide Slide Pos. A9 and Pos. A16 1x 142-55-0007.0 Right-angle lever unit with right lever Pos. A7 Without feeder, press, and center punch incl. light curtain for operator safety Financing through our bank is also available. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feed Plain text display Press force monitoring Credog T S Ttspfx Aahog Wire straightening unit Bosch wire stripping devices Holder and brush motor with mounted tool W32/1-32 Soundproof cabin Bin for copper wire with punched parts Control cabinet Drive power: 7.5 kW Speed (min. - max.): 40-250 rpm Pressing force / bending slide: 80 kN Pressing force / punching unit: 200 kN Feed lengthwise: 2050 mm Strip width lengthwise: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrics (LxWxH): 3600 x 1500 x 2400 mm Item condition: very good Description per manufacturer, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure! Large selection of mezzanine floors, pallet racks, shelving units, and vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools. Financing through our bank is also possible: komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 200 letvica, skupna masa: 33.000 kg, stiskalna sila: 1.000 t, hod: 650 mm, največja hitrost vožnje: 3.600 mm/min, TECHNICAL DETAILS Press force: 1,000 t Core plate clamping force: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of movable platen: 650 mm Stroke of mold carrier platen towards operator: 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on the plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump output: 9 kW Oil dynamics pump output: 11 kW Installed electrical power: 21.5 kW Hydraulic oil quantity: approx. 160 l Operating media Quantity of hydraulic fluid emulsified with water and 5% oil CIL-SOLIOIL-BK: approx. 1,300 l Nitrogen cylinders (60 l at 200 atm) for accumulator pre-charge: approx. 10 MACHINE DETAILS Weights Weight of press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Csdpfx Aasy Hhqdohjrg Weight of electrical unit: 0.2 t Total shipping weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic device for power regulation Electrovalve venting