Ravni Robilnik nakup rabljenega (1.077)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Kdodpfx Absdv Eu Hsxon The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036561, lastna masa: 5.820 kg, največja dovoljena obremenitev: 29.180 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rdeča, The images are sample/archival pictures! The vehicle may currently be in use! Tarp color freely selectable Chassis: Semi-Trailer Forwarder Fine-grained steel welded construction in lightweight design, fifth wheel plate with exchangeable 2" kingpin Slightly angled new design outer frame with "Load-Lock profile" for lashing strap attachment 3 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 14 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 24 t 2-speed landing gear, one-sided operation, with straight base, load equalizing type: SAF Note: Free landing gear foot spacing or free rear swing radius approx. 1930 mm Extendable rear ladder Side door holders 2 wheel chocks with holders Side underrun protection, aluminum Painted in RAL 3002 Carmine Red No warranty for coating/lacquering quality on repainted or coated attachments. Rear underrun protection, galvanized steel Painted in RAL 9010 Pure White, including rear underrun protection brackets No warranty for coating/lacquering quality on repainted or coated attachments. Quarter shell mudguards in front of and behind axle assembly With anti-spray mudflaps according to EU regulations Rear crash protection 1 aluminum ladder approx. 2550 mm, with side holder, behind side underrun protection Mounting rail on outer frame for direct tarp tensioners, bolted design, stands approx. 15–20 mm above loading surface, upper section with perforated profile for lashing straps, load-lock side rail must remain usable (since no lashing eyes). With bottom aluminum drop-in slat usable as stopper! (not in conjunction with sideboards) 2 plastic toolboxes, w = 800 / h = 450 / d = 450 mm 1 each on front left and right, behind the 3rd axle Axles & Suspension BPW disc brake axles with 430 mm disc diameter Wheel hubs painted in RAL 3002 Carmine Red "Axle/chassis laser alignment" to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connector line 24 Volt EBS, manufacturer Wabco, electronic brake system with EBS socket at the front, without connection cable Attention: This trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lift & lower valve + auto-reset function Vehicle stability control system Telematics Idem Telemetry incl. LIN battery, coupling sensor and GPS (no contract included, customer must arrange contract). Wheels & Tires 385/65 R22.5, manufacturer as selected by the supplier Polished aluminum rim, make Alcoa Dura-Bright Electrics 24 Volt, multi-chamber lighting units, side yellow LED lighting Kodjxbzkkepfx Abxedn Lamp carrier painted in RAL 9010 Pure White No warranty for coating/lacquering quality on repainted or coated attachments. 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connector cable LED working lights on both sides (controlled via reverse light), positioned at height of first cross-member behind landing gear 2 additional LED working lights at the rear, controlled via reverse light Tarp Tarp with welded horizontal and vertical belts Customer branding possible on tail portal, tarp color freely selectable

Stanje: novo, Leto izdelave: 2024, Model Type: Hammel, Arjes, Lindner, Pronar Kedpfxjr Nf Rlo Abxsdn VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 AT-TEC Recycling Solutions GmbH is a metalworking company specializing in the manufacture of shredding tools for shredder machines, with an in-house welding facility. Our experienced team takes pride in offering high-quality, customized solutions. We are committed to quality, innovation, and customer satisfaction to ensure that our products fully meet the requirements of our clients. Our customers come from various sectors, including waste management, recycling companies, and machine manufacturers. We maintain long-term partnerships and are pleased to supply our products and services to businesses seeking reliable and high-performance shredding solutions.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Prenovljen Eurec S20.00. Motor Scania, obnovljene gredi in rešetka. Nov radijski servis. 4800 delovnih ur. Kedoyxxmmepfx Abxodn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-Shredder PMG-H 900 – immediately available – as new Kdjdpoy Ahlyofx Abxon For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation unit • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed at a customer's site, tested, and subsequently properly dismantled. Due to a project change, the plant is now being offered. Condition: nearly new (test operation only) Availability: immediately from stock – no lead time Price: attractive cost-saving compared to new equipment — Special advantages: • Immediately available – no months-long lead times as with new machines • Only used for test runs – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminium cables – no pre-sorting required. The system includes: • Granulator (cutting mill) • Zig-zag separator • Turbine for fine grinding • Dry separation table Material purity up to 99%. In combination with the PMG-H 900 pre-shredder, this produces a powerful recycling line for industrial applications. — Technical data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminium cables — Technical data Pre-Shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The system is available at short notice. Subject to prior sale. Viewing possible by arrangement.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 120 h, Funkcionalnost: popolnoma funkcionalen, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, portable crusher that reduces material using a fixed and a movable jaw. - Crushing principle: Jaw crusher – large, wear-resistant manganese steel jaws. - Feed opening: approx. 700 mm × 400 mm – this is the maximum material size the crusher can accept at once. Kjdpfxjy It Tgj Abxodn - Capacity: up to approx. 45 tonnes/hour (depending on material quality). - Power: Diesel engine (e.g. Deutz, approx. 66–70 HP, actual engine may vary by model). - Output size: adjustable from coarse to fine (e.g. 10–120 mm), allowing for variable grain sizes of the crushed material. - Mobility: Tracked or rubber-wheeled chassis → easily maneuverable on site. - Controls: often via radio remote control. What is it used for? - Crushing construction debris - On-site reduction of concrete, reinforced concrete, bricks and stones for reuse or easier handling - Recycling

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, - RABLJENO - 5-OSNI HORIZONTALNI OBDELOVALNI CENTER Z VEČPALETNIM SISTEMOM POMIK V OSI X: 2000 mm POMIK V OSI Y: 1600 mm POMIK V OSI Z: 1800 mm VRETENO: 4000 vrt/min; 37 kW; 794 Nm; BIG PLUS ISO 50 PALETA: št. 4; 1000 x 1000 mm NAJVEČJA DOVOLJENA OBREMENITEV: 3000 kg MAKS. OBDELJIVA VELIKOST KOSA: ø 1550 mm HLADILNA TEKOČINA POD VISOKIM TLAKOM: 30 bar MENJALNIK ORODJA: VERIŽNI TIP; 306 pozicij MAKS. TEŽA ORODJA: 35 kg GLAVA: AVTOMATSKA 1° ROTACIJSKA GLAVA KRMLJENJE: SIEMENS 840 D Kodpjyry Rlofx Abxsdn DODATNA OPREMA: TRANSPORTER OSTRUŽKOV; LINEARNE MERILNE LETVE; MERILNA SONDÁ RENISHAW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, - RABLJENO - 4-OSNI HORIZONTALNI OBDELOVALNI CENTER Z VEČPALETNIM SISTEMOM POMIK OSI X: 1000 mm POMIK OSI Y: 850 mm POMIK OSI Z: 750 mm RAZDALJA VRETENO-MIZA: 50 - 900 mm HITRI POMIKI X-Y-Z: 30 m/min VRETENO: 15000 vrt./min; 30 kW; ISO 50 - BT PALETA: INDEKSIRNA; ŠT. 15; 630x630 mm Kedpfx Absyry Rroxsdn HLADILNA TEKOČINA POD VISOKIM TLAKOM: 70 bar MAGAZIN ORODJA: VERIŽNI TIP; 225 POZICIJ MAKS. PREMER ORODJA: 120 mm MAKS. DOLŽINA ORODJA: 500 mm MAKS. TEŽA ORODJA: 27 kg KRMILNA ENOTA: FANUC 16i-M DODATKI: TRANSPORTER OSTRUŽKOV; NASTAVLJALEC ORODJA; MERILNA SOND

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, - RABLJENO - 4-OSNI HORIZONTALNI OBDELOVALNI CENTER S PALATNIM MENJALCEM POMIK X-OSI: 2000 mm POMIK Y-OSI: 1300 mm POMIK Z-OSI: 1200 mm VRETENO: 60-6000 rpm; 30-37 kW; ISO 50 - BT PALETA: št. 2 ; 1000x1000 mm MAKSIMALNA DOVOLJENA OBREMENITEV: 3000 kg Kodpfx Asyvlx Djbxjdn MAGAZIN ORODIJ: VERIŽNI TIP; 120 POZICIJ KRMILNA ENOTA: MSC 502 TEŽA: 35200 kg SKUPNE DIMENZIJE: 5330 x 7720 x 3810 mm DODATKI: HLADILNA TEKOČINA VISOKEGA PRITISKA; TRANSPORTER OSTRUŽKOV; RS 232 SERIJSKI PRIKLJUČEK; MERILEC ORODIJ OPOMBA: MAKS. PREMER OBDELKA 2000 mm; MAKS. VIŠINA 1550 mm; MAKS. TEŽA 3000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 226 h, največja hitrost: 80 km/h, skupna masa: 1.800 kg, Jensen A425 DI – Only 226 Original Hours! Price: net: €16,499 negotiable gross: €19,575 negotiable Year of manufacture: 2012 First registration: 12/2012 Operating hours: 226 Original paint! Oil and air filter change performed (invoice available) As-new condition, see photos Chipper in like-new condition, without DPF or AdBlue Chipping diameter: 200 mm Weight: 1,800 kg Chassis: 80 km/h Upper structure rotatable / discharge chute rotatable Engine: Hatz Diesel Power control / overload protection Standard-cut knives Condition: see photos Documentation available (Registration Certificate Part II / Registration Certificate Part I / TÜV available) Kjdpfx Abjy Dtyfexjdn Adjustable drawbar with ball hitch For sale to businesses, dealers, or private buyers An invoice will be issued showing VAT separately. Please also check our other listings! Sale without warranty, guarantee, or returns, and under exclusion of liability for material defects. All information, images, and notes are non-binding and serve exclusively as a general description. The details are provided to the best of our knowledge and belief but cannot be guaranteed. Offer subject to prior sale, errors, and changes.

Stanje: skoraj kot novo (rabljeno), WEIMA WL 15 shredder / crusher / chipper – DTR technical documentation included – Year of manufacture: 1992 Kjdpfx Abofm Tp Djxsdn TECHNICAL SPECIFICATIONS: - Main drive motor power: 37 kW - Hydraulic pump motor power: 1.5 kW - Total power: 39.25 kW - AUTOMATIC AUTOREVERSE - HYDRAULIC FEED HOPPER - Shaft speed: 90 rpm - Rotor length: 1500 mm - Multi-knife shaft: 36 strikes - Knife dimensions: 35 x 35 mm - Screen: Ø20 / 15 mm - Pressing drawer height: 180 mm - Chip discharge auger - Rotor diameter: 245 mm - Feed opening dimensions: 1500 mm x 1500 mm - Drawer length: 1000 mm - Overall dimensions (L x W x H): 270 x 240 x 280 cm - Weight: 4000 kg

Stanje: dober (rabljeno), Machine number: 2082 Type / Model: F315 Control: conventional Travel range x-y-z: 820 x 300 x 440 mm Table: 1250 x 335 mm Kodoh Rawfspfx Abxodn Clamping surface: 1100 x 225 mm Speed range: 56 to 2800 rpm Spindle taper: SK 40 Feed rate: 10 to 630 mm/min Rapid traverse: Connection: 6 kW Accessories/Equipment: Condition: good Weight: 2 t Dimensions: 1700 x 2000 x 1900 mm

Stanje: zelo dobro (rabljeno), Kataloška številka 7260 TEHNIČNI PODATKI - Vstop lijaka za nalaganje: 870 x 730 mm - Delovna širina rotorja: 710 mm - Glavni motor: 18,5 kW - Motor črpalke: 0,75 kW - Število nožev: 19 kosov - Dimenzija noža: 75 x 40 mm - Sito: 15 mm - Prisilni predal - Električni avto-reverz - Iztok za zdrobljen les: fi 250 mm - Dimenzije (d/š/v): 2350 x 1400 x 1670 mm - Teža: 1360 kg Ksdpjzcd H Esfx Abxodn PREDNOSTI – Prisilni predal – Zelo dobro stanje – Rabljeni sekalnik Neto cena: 32.900 PLN Neto cena: 7.830 EUR, odvisno od tečaja 4,2 EUR (Cene se lahko spreminjajo pri večjih nihanjih)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7069 TEHNIČNI PODATKI - širina vhoda 400 mm - višina vhoda 150 mm - širina gredi 450 mm - premer gredi 550 mm - število nožev 2 kos Kodpfxjzccdpj Abxedn - po 3 zobate vlečne gredi zgoraj in spodaj 2×2,2 kW - električni avto-reverz - vzvratna vožnja - tračni podajalnik - dolžina podajalnika 5100 mm - širina dovajalnega traku 400 mm - glavni motor 30 kW - dimenzije sekalnika d/š/v 2600x1500x1530 mm - skupne dimenzije podajalnika d/š/v 5200x560x910 mm - teža približno 3000 kg – s tračnim podajalnikom – električni avto-reverz (z možnostjo nastavitve) – vzvratna vožnja – rabljeni sekalnik, v zelo dobrem stanju Cena brez DDV: 68.900 PLN Cena brez DDV: 16.400 EUR, odvisno od tečaja 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih tečaja)

Stanje: rabljeno, Leto izdelave: 2003, Crushes bottles by pressing them. - High crushing capacity - Significant volume reduction - Accident-proof (shatter-protected) - Low noise emission [85/87 dB(A)] - Low wear rate - Compact design (minimal space requirements) Ksdjvcqhxspfx Abxedn Machine (additional info): Bottle Crushing Plant Conti Crushing capacity: 6,000 bottles/hour with feed conveyor Current: 6.5 A Voltage: 380V Frequency: 50Hz Length: 1,520 mm Width: 1,300 mm Height: 2,600 mm Base construction: On domed feet Equipment: Cullet collection tray, noise protection enclosure, feed chute for manual disposal of individual bottles Weight: 700 kg

Stanje: zelo dobro (rabljeno), Kataloška številka 7259 TEHNIČNI PODATKI - širina dovoda: 400 mm - višina dovoda: 200 mm - širina gredi: 530 mm - premer gredi: 550 mm - dolžina rezila: 530 mm - število rezil: 2 kos - mere sita: 50x50 mm - 2 spodnji zobati vlekalni gredi - motor spodnje gredi: 2,2 kW - zgornja zobata vlekalna gred - motor zgornje gredi: 2,2 kW - tračni podajalnik: 0,55 kW - dolžina podajalnega traku: 3000 mm - širina podajalnega traku: 410 mm - glavni motor: 45 kW - avto-reverz - vzvratna vožnja - dimenzije stroja (d/š/v): 2900x1600x1600 mm - dimenzije podajalnika (d/š/v): 3070x720x670 mm - teža približno 3500 kg PREDNOSTI – nemška proizvodnja – avto-reverz (z možnostjo nastavitve) – vzvratna vožnja – rabljen sekalnik, zelo dobro ohranjen Kodpfx Aoy Nytiebxsdn Neto cena: 85.900 PLN Neto cena: 20.450 EUR po tečaju 4,2 EUR (Cene se lahko spreminjajo glede na valutna nihanja)

Stanje: zelo dobro (rabljeno), Kataloška številka: 7649 TEHNIČNI PODATKI širina vhoda: 900 mm višina vhoda: 300 mm širina gredi: 1030 mm premer gredi: 700 mm dolžina noža: 1030 mm število nožev: 3 kos mere sita: 70x70 mm spodaj 2 zobati vpenjalni gredi motor spodnje gredi: 7,5 kW zgoraj 2 zobati vpenjalni gredi motor zgornje gredi: 7,5 kW trakasti podajalnik redler z verižnim trakom 5600 mm + 10600 mm: 2,2 kW širina podajalnega traku: 800 mm glavni motor: 90 kW vzvratni hod skupne mere stroja d/š/v: 3300x3100x1700 mm mere osnove za sekalnik: 3300x2080x1940 mm mere podajalnika / redlerja d/š/v: 5600x900x1000 mm + 10600x1050x1600 mm mere osnove za podajalni trak: 5100x1300x2520 mm skupna teža približno: 16.000 kg PREDNOSTI – nemška izdelava – verižni transporter tipa redler, opremljen s strgali – vzvratni hod – DTR dokumentacija – rabljen sekalnik, odlično ohranjen Neto cena: 219.900 PLN Neto cena: 52.350 EUR odvisno od tečaja 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih) Kdedpfezcby Nox Abxen

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7026 TEHNIČNI PODATKI - širina odprtine: 740 mm - višina odprtine: 300 mm - širina gredi: 780 mm - premer gredi: 1000 mm - dolžina noža: 780 mm - število nožev: 2 kos - mere sita: 55x55 mm - spodaj 4 zobate vlezne gredi - motor spodnje gredi: 5,5 kW - zgoraj 3 zobate vlezne gredi - motor zgornje gredi: 5,5 kW - trakasti podajalnik Kjdpjzcbyvofx Abxedn - dolžina dovajalnega traku: 4300 mm - širina dovajalnega traku: 600 mm - motor pogona traku: 2,2 kW - glavni motor: 90 kW - vzvratna vožnja - samodejni obrat - skupne mere stroja (d/š/v): 4600x2350x1700 mm - skupne mere podajalnika (d/š/v): 4550x980x970 mm - skupna teža približno 11000 kg – izdelava: Nemčija, – samodejni obrat (z možnostjo nastavitve) – rabljen sekalnik, v zelo dobrem stanju Cena brez DDV: 231900 PLN Cena brez DDV: 55200 EUR Cena brez DDV izračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se lahko cena spremeni)

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 11.517 h, Color: Grey Unladen weight: 6,000 kg - Year of manufacture: 2014 - Documentation available: No - CE certificate: No - Serial number: 070614/B/1-407 - Operating hours: 11,517 - Number of milling spindles [pcs]: 1 - Milling spindle 1: - Number of controlled axes [pcs]: 4 - C-axis present: Yes - Type of milling table: Flat table - Boring tool present: Yes - Horizontal boring spindles [pcs]: 6 - Vertical boring spindles [pcs]: 18 - Tool changer positions [pcs]: 12 - System/software: TWINCAT - Safety features: Safety fence, safety mat - Vacuum pump present: Yes - Quantity [pcs]: 2 - Brand: Becker - Year of manufacture: 2023 - Main motor power [kW]: 18.5 - Capacity [m³/h]: 600 - Vacuum [bar]: 250 Kdjdpfx Abjx E Uk Uoxon - CNC documentation available: USB stick - Working area X [mm]: 7,220 - Working area Y [mm]: 1,580 - Z-axis working area [mm]: 180 - Transport weight [kg]: 6,000 kg Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for companies Delivery and trade-in possible at any time for all industrial sector equipment Glenn Smeets

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 4 h, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), skupna masa: 1.200 kg, skupna dolžina: 1.750 mm, skupna širina: 1.200 mm, skupna višina: 1.640 mm, delovna širina: 630 mm, vhodna napetost: 400 V, višina krmilne omare: 200 mm, dolžina elektro omare: 600 mm, širina krmilne omare: 600 mm, število rezil: 15, največja hitrost vrtenja: 100 obr/min, premer rotorja: 260 mm, širina rotorja: 630 mm, perforacija sita: 15 mm, vrsta vhodnega toka: Klimatska naprava, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, Destructeur de déchets broyeur déchiqueteur de bois MHR630 ecoline La gamme MHR ecoline est composée de machines de broyage de bois robustes et économes en énergie, conçues pour une utilisation continue et fiable dans un environnement professionnel. Ces broyeurs prêts à l’emploi se distinguent par leur haute performance, leur faible consommation d’énergie et leur excellent rapport qualité-prix. Ils conviennent donc parfaitement aux artisans, entreprises de recyclage et ateliers de transformation du bois recherchant une solution économique et performante. Kdjdszbkxfjpfx Abxsn Avantages - Processus de broyage continu et homogène - Haute performance pour une faible consommation d’énergie - Construction robuste - Large ouverture d’alimentation - Excellent rapport qualité-prix - Prêt à brancher (prise CEE 5 broches, 400V, 32A triphasé) - Commande Siemens PLC - MHR630 ecoline Rößler destructeur de déchets « Made in Germany »

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 16.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: #005, skupna masa: 46.100 kg, dolžina elektro omare: 5.000 mm, širina krmilne omare: 2.400 mm, višina krmilne omare: 2.600 mm, moč: 450 kW (611,83 KM), vrsta vhodnega toka: Enosmerni tok, največja hitrost vrtenja: 32 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Oprema - Moč 450 kW DC - z ABB frekvenčnim pretvornikom vključno z DTC regulacijo - Pogon s stožčastim zobniškim prenosom - hitrost vrtenja valja do pribl. 32 vrt/min / nastavljiva preko jermenskega prenosa in frekvenčnega pretvornika. - BioPower valj s 42 zobmi - Dolžina valja 3.000 mm, premer 800 mm - Brezstopenjska regulacija hitrosti vrtenja - Tip zoba: oblika C3 trapezni zob, 174 mm - Oklepne plošče kot zaščita pred obrabo na valju - Hidravlično nastavljiv protikačnik - nastavitev reže za rezanje preko zaslona - 4 kosi cilindrov za kačnik - Centralno mazanje - Hidravlično odpiranje pokrova kačnika - Predmontirana glavna elektro omarica - Lokalna upravljalna enota na stroju - Opozorilo na zagon - Osvetlitev motornega prostora - Barva RAL 2011 globoko oranžna Stroj ima naslednjo dodatno opremo: - Držalo omejevalnika - Omejevalni elementi - Samodejno pozicioniranje kačnika - Samodejni čistilni sistem kačnika - Podstavitev stroja, višina 1.200 mm - Lijakov nastavek na 3 straneh, levo ali desno - Modul z utripajočo lučjo - Magnetni ventil za brizgalni sistem z vodo - Brezžični daljinski upravljalnik (EU) - Profibus integracija - 2 dodatni izhodni priključki v električni omarici, do 7,5 kW - Električni zaboj/kontejner z klimatizacijo, d x š x v 5.000 x 2.400 x 2.600 mm - Spodnji transporter AA 8.350 x BB 1.200 mm, 5,5 kW, reverzibilen Kodpfxsx I A Ake Abxjdn Na zahtevo lahko stroj v naši tovarni temeljito obnovimo. Drugo: - Zaslon v nemščini, možnost tudi v angleščini - Nalepke in označbe na upravljalnem panelu v nemščini, možnost tudi v angleščini - Opozorilne nalepke v nemščini, možnost tudi v angleščini - Navodila za uporabo v nemškem jeziku (tako v tiskani kot digitalni obliki, po potrebi za lokalni prevod)

Leto izdelave: 2024, obratovalne ure: 97 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 0,75 kW (1,02 KM), skupna masa: 1.240 kg, skupna dolžina: 1.560 mm, skupna širina: 2.540 mm, skupna višina: 2.490 mm, vhodna napetost: 400 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, The ASCO VS Medi drum screen is the ideal choice for demanding screening tasks with high material throughput. Equipped with a robust design and intelligent technology, it reliably separates large and heavy components from the material to be screened—delivering significantly increased screening performance and prolonged screen surface life. Multi-stage screening with system Thanks to the integrated bar sizer, efficient pre-separation is made possible—perfect for coarse materials. Combined with the three-fraction system, the material can be precisely divided into three different grain sizes. An intelligent separating plate ensures clear material separation and high purity in each fraction—all in a single screening process. Flexible and adaptable to any job site The VS Medi impresses not only with its performance but also with its adaptability. Height-adjustable support legs provide optimal stability on uneven ground. In addition, the adjustable screen inclination allows you to individually adapt the screening process to the material at hand—for the best possible results under real working conditions. Highlights of the ASCO VS Medi: - Robust coarse screening technology for heavy materials - Pre-separation via bar sizer—less wear, greater efficiency - Three-fraction system for precise grain size distribution - Adjustable screen inclination for optimal screening performance Kedpfjw Ryvlox Abxodn - Height-adjustable construction for firm footing on any surface Screening on a new level—with the ASCO VS Medi Whether in civil engineering, soil conditioning, or industrial recycling—the ASCO VS Medi drum screen is the perfect solution for large material volumes and diverse requirements. Maximum performance meets sophisticated technology—for sustainable and cost-effective screening processes. 📩 Find out more about the ASCO VS Medi or request a customized quote today!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Vecoplan VTH 55/25/5 industrijski drobilnik/mlin naprodaj! -vibracijska miza -detektor kovin -krmilna omara Kjdsy Ui Tcspfx Abxodn -približno 20 parov nožev -rezervno sito -glavni motor 75 kW Za vsa vprašanja nas kontaktirajte z zaupanjem!

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, moč: 250 kW (339,91 KM), Elektropogon: 250 kW Kdodpfx Aeyuvr Robxsn Vključno z omarico za upravljanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.743 h, Funkcionalnost: popolnoma funkcionalen, moč: 257 kW (349,42 KM), Mobilna drobilna naprava URRACO 75D. Zložljiv izhodni trak, nadtrakni magnet, radijsko daljinsko upravljanje. Naslednji servis v 02-2026. Kjdpfx Abeydmgdjxsdn