Popolna Pv-Naprava 240 Kwp nakup rabljenega (16.214)

Stanje: rabljeno, številka stroja/vozila: 008401, Pozicija 1: Spodnja brusilna naprava DMC-UNISAND K-I Pgodjywafnspfx Altep Pozicija 2: Vertikalno brušenje od zgoraj DMC-UNISAND K-I

Stanje: rabljeno, številka stroja/vozila: 008601, Maks. širina panela: 3200 mm Maks. dolžina panela: 1000 mm Pjdpfezbrnhox Altjgp Število agregatov: 6 Število agregatov: 4 Stranske horizontalne skupine: da

Stanje: rabljeno, številka stroja/vozila: 005687, Maximum panel width: 3200 mm Maximum panel length: 1200 mm System for 180-degree tilting of the panel: yes Pgedpoktdtpofx Altsp

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling Pjdpfx Aev Si Szjltegp 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive Pgjdsw Dvivspfx Altjp • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.

Stanje: rabljeno, Leto izdelave: 1994, Turning diameter 1250 mm Swing diameter 1160 mm Turning height 800 mm Faceplate diameter 1000 mm Total power requirement 97 kW Machine weight approx. 25,000 kg Space requirement approx. m PITTLER Pgodpfx Alet Hwy Sstjp Vertical CNC turning and milling center with tool changer and pallet changer Model PV 1250 / 1-1 Year of manufacture 1994 Max. turning diameter 1,000 mm Max. swing diameter 1,160 mm Turning length approx. 800 mm X-axis (horizontal) 1,300 mm Y-axis (vertical) 800 mm Feed rate / rapid traverse 16,000 mm/min Main spindle speed 10 - 1,000 rpm Main spindle speed via separate C-axis 0.1 - 16 rpm C-axis positioning accuracy 360,000° +/- 5'' Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speeds 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Connected load approx. 97 kVA - 400 V - 50 Hz Total weight approx. 25,000 kg Accessories / Special equipment • CNC 3-axis control NUM 760 TX with graphic, menu-guided dialog programming and all standard options, cycles, and subprograms, with tool compensation, thread cutting cycle, constant cutting speed programming, etc. • 2-axis CNC tool slide (1,300x800 mm) with powered toolholder ISO 50 / 22kW • Tool changer with 16 tool pockets (max. length 450 mm, max. 40 kg) • Pallet changing system (pallet 630 x 630 mm) with a setup station with indexing and pallet drive and 2 separate pallet stations • 3 pallets 630 x 630 mm, 3-jaw chuck Ø 650 mm, faceplate Ø 900 mm • Chip conveyor, band filter coolant system, full enclosure (including safety fence for pallet change area), separate control cabinet, operating manuals • Approx. 20 tool holders and various additional accessories Powerful, universal turning and milling center for complete machining (turning, drilling, milling, and threading) with high speeds and high metal removal rates! Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice. We look forward to receiving your order. Additionally, we have a large selection of modern used lathes under power in stock. Please inquire!

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Ponujamo štiri stroje za obdelavo kovin. 1) Pulzno varilni aparat Cloos GLC 353 MC3, leto izdelave: 2007, teža: pribl. 160 kg. 2) MIG/MAG varilni aparat Cloos GLC 255, leto izdelave: 2004, dimenzije X/Y/Z: pribl. 980 mm/450 mm/700 mm, teža: pribl. 115 kg. 3) Stroj za upogibanje palic hebö, tip II, leto izdelave: 1979. 4) Krožna žaga Eisele VMS II PV-P, leto izdelave: 1974, teža: pribl. 290 kg. Ogled je možen po predhodnem dogovoru. Pgedszp Rhhopfx Altop

Stanje: pripravljen za uporabo (rabljen), Hommel Opticline Contour 414, merilni instrument za valjaste površine, merilna naprava, stroj za merjenje valjastih površin Največji premer merjenja: 140 mm Največja dolžina merjenja: 300 mm Ločljivost: 0,1 µm Natančnost merjenja (premer): (1,0 + D/200) µm Natančnost merjenja (dolžina): (2,6 + L/200) µm Ponovljivost merjenja (premer): 0,3 µm Hitrost merjenja: samodejno 10–80 mm/s Hitrost pozicioniranja: do 200 mm/s Hitrost vrtenja: 1 vrt/s Opis je bil prevzet. Vabljeni, da nas obiščete. Pgsdpfx Alezmwg Setjp Z veseljem vam bomo uredili tudi ugodno transportno podjetje! Dobili boste ustrezni račun. Za tuje stranke je možen tudi izstavitev neto računa. Predpogoj je veljavna identifikacijska številka za DDV. Pridržujemo si pravico do sprememb. Obiščite našo spletno trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in se uporabljajo samo za identifikacijo in opis izdelkov. Možne so odstopanja od tehničnih podatkov, kot tudi napake v opisu izdelka. Pridržujemo si pravico do sprememb.

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, MBM ASAS ME Naprava za odstranjevanje blata za stroj za rezanje z vodnim curkom Rabljeno, letnik 2012 Pgodpfx Aezh U Naeltjp

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vakuum na sesalni strani (maks.): 2.400 mbar, sesalna zmogljivost: 6.000 m³/h, premer sesalne cevi: 300 mm, filtrirna površina: 30 m², skupna višina: 2.350 mm, skupna dolžina: 3.000 mm, skupna širina: 1.100 mm, skupna masa: 900 kg, Odvod prahu, odvod žagovine, samoočiščevalni pnevmatski podtlak Alko Mobil Power JET 300 Filter se med delovanjem pnevmatsko čisti z impulzi stisnjenega zraka, kar zagotavlja visoko učinkovitost naprave. Ventilator je postavljen na čisti strani, kar minimalizira tveganje eksplozije. Idealno za širokopasovne brusilke in vse vrste suhega prahu pri različnih tehnoloških procesih. Ventilator z močjo 7,5 kW Zmogljivost: 6000 m³/h Podtlak: 2400 Pa Pedpfxjy A Iwco Altogp Premer nastavka: 300 mm Povratek zraka Skladiščna številka: 1130

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Mahr MarSurf CD 120 – merilnik konture in hrapavosti, merilnik površine Merilna dolžina: 120 mm Merilna sila, nastavljiva: 2 mN do 120 mN Pedpszmtlqjfx Altsgp Mahr ST 500 – merilni stojalo Leto izdelave: 2009 Dodatna oprema: Merilni senzor za konturo: Mahr PCV, merilna roka 350 Merilni senzor za hrapavost (licenca za programsko opremo za merjenje hrapavosti je potekla) Mahr – kalibracijski standard Mahr – križna miza Z veseljem vas vabimo, da nas obiščete in si napravo ogledate. Z veseljem vam lahko uredimo tudi cenovno ugoden prevoz. Dobite boste ustrezni račun. Za tuje stranke lahko pripravimo tudi račun brez DDV. Pogoj je veljavna številka za identifikacijo davčnega zavezanca. Pridržujemo si pravico do spremembe prodaje. Obiščite našo spletno trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in se uporabljajo samo za identifikacijo in opis izdelkov. Možne so odstopanja od tehničnih podatkov, prav tako pa se pridržujemo pravice do napak v opisu izdelka.

Stanje: novo, Leto izdelave: 2021, Številka skladišča: 100549801 Transportne dimenzije (D x Š x V): 0 x 0 x 0 ---- Letnik izdelave: 2021 Teža: 1060 kg Adapter ploščica SW48 Likufix Lokacija: Schweinfurt Pedpfx Ajzkz I Isltegp

Stanje: dober (rabljeno), Samovozna posoda Diosna HK 240 - rabljena - nosilnost 240 kg testa + teža posode - po pregledu - tehnično stanje: dobro Pgjdeznwmuspfx Altsp - prevzem v skladišču / možnost dostave - cena na zahtevo

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Linija za barvanje lesenih in kovinskih elementov ELMAG SER-FC-CS45 Podpfezk Epcox Altsgp 1. Avtomatski transportni sistem z: – Vozički: 40 kosov – Maksimalna dovoljena skupna masa: 6000 kg – Dolžina vozička: 3000 mm – Sistem dovajanja: avtomatski – Vrtenje vozička: avtomatsko 2. Kabina za barvanje: – Dimenzije: 4080 x 2000 x 4000 – Moč: 4 kW – Pretok: 14.000 m3/h 3. Sistem za nanašanje premaza (linijski sistem): – Dolžina: 4000 mm – Višina ventila: 4500 mm – Uporabna delovna višina: 2500 mm – Pretok črpalke: 500 l/min – Izvedba ventila: nerjaveče jeklo – Prostornina ventila za barvo: 200 l 4. Komora za sušenje: – Dimenzije: 13.000 x 2900 x 4100 5. Sistem za čiščenje zraka (vhodni + recirkulacijski filtri): – Pretok zraka: 7000 m3/h – Barvalna linija s kompresorjem – Sistem za čiščenje zraka (vhodni in recirkulacijski filtri) – pretok zraka: 15.000 m3/h – Toplotna moč: 110.000 kcal/h

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Ponujamo laserski rezalni sistem Trumpf z avtomatskim sistemom Trumpf Liftmaster. Moč laserja: 5000 W, vrsta laserja: CO₂-laser Trumpf TruFlow 5000, valovna dolžina: 10,6 µm, delovna površina X/Y: 3000 mm/1500 mm, gib Z: približno 115 mm, največja obremenitev mize: približno 900 kg, največja simultana hitrost X/Y: približno 300 m/min, največja debelina pločevine (jeklo/nerjavno jeklo/aluminij): približno 25 mm/20 mm/12 mm, število delovnih ur (stan 12. 06. 2025): približno 74181 ur, največja velikost plošče LiftMaster: približno 3000 mm/1500 mm, največja nosilnost LiftMaster: približno 917 kg, največji obseg debeline pločevine LiftMaster: 20 mm–25 mm. Vključno s perifernimi napravami in dodatno opremo. Dimenzije stroja X/Y/Z: približno 11250 mm/4600 mm/2400 mm, teža: približno 12500 kg. Dokumentacija je na voljo. Ogled na kraju samem je možen. Pgjdpfszpyxiex Altsp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, FOR SALE – COMPLETE INDUSTRIAL SAWMILL LINE (EWD / SPRINGER / MICROTEC) High-performance, fully integrated sawmill facility with EWD saw line for efficient industrial roundwood processing. The plant combines proven technology with ongoing modernization and is in excellent operating condition. Cutting capacity: approx. 120,000 solid cubic meters The line has been regularly serviced, professionally maintained, and is partially still in operation. On-site inspection under working conditions is possible by appointment at any time. Pjdpozi D Dijfx Altogp Availability: approx. June 2026 Scope of delivery Log yard (infeed & preparation): • Sorting, measuring, and debarking system – SPRINGER (Year of manufacture 2017) • Nicholson debarking machine (Year of manufacture 1992) • Microtec measuring system (Year of manufacture 2015) • 30 sorting boxes • Cross-cut system (Year of manufacture 2017) Saw line – EWD: • Twin-shaft circular saw DWK 700 (Year of manufacture 1999) • Profiling chipper PF 19-3SP/V (Year of manufacture 2003) • Edger circular saw BNK 225/6 (Year of manufacture 2003) • Complete mechanization and control system • Edger EWD Optimes BK-100B Lumber sorting & ancillary facilities: • 7 sorting boxes with packaging system • Complete chip and residual wood disposal system • Drying kilns and heating system Your benefits • Complete line – ready for immediate operation • Proven industrial technology • Regularly maintained and modernized • High operating efficiency • Compact and high-performance design • Ideal for industrial lumber production General information • Year of manufacture of key components: 1992 – 2017 • Condition: very good • Availability: from June 2026 • Inspection: under working conditions by appointment possible This facility represents a cost-effective solution for businesses looking for a complete, high-capacity, and immediately available sawmill line.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, 8-tonski previjalnik, rabljeni stroj Skupne dimenzije: 2140 x 930 x 1070 mm Psdoupr Ngopfx Altsgp Teža: 416 kg Minimalno zapiranje previjalnika: 430 mm Maksimalno odpiranje previjalnika: 540 mm Maksimalna nosilnost: 8000 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Temperirna enota Skupne dimenzije: 600 x 700 x 1600 mm Pgsdpfx Alsgvddpstep Teža: 157 kg Moč: 6 kW Napetost: 230 V Vrsta hladiva: R134a

Stanje: rabljeno, Vibracijska posodica za podajanje, krožni podajalnik delov Gasco BVN3 470mm, rabljeni stroj Proizvajalec: Gasco Tip: BVN3 Pedpfx Alsy R S I Ijtogp Skupne dimenzije: 555 x 535 x 400 mm Velikost posode/rezervoarja: 470 x 250 mm Električni podatki: 230 V, 1,6A

Stanje: rabljeno, Temperirna enota HB-Therm HB-100 U1, Temperiranje, Temperiranje tekočin, Industrijsko temperiranje, Termolator, Rabljeni stroj Proizvajalec: HB-Therm Tip: HB-100 U1 Skupne dimenzije: 200 × 650 × 500 mm Leto izdelave: 2008 Tehnični podatki: Maksimalna delovna temperatura: 100°C Grelná moč: 8 kW Podpsx Emfwofx Altsgp Hladilna zmogljivost: 30 kW Medij za prenos toplote: voda

Stanje: delavnici obnovljeno (rabljeno), Čistilno sredstvo: ogljikovodiki ali modificirani alkohol. Pgodsznhgropfx Altsp

Stanje: dober (rabljeno), Weinig Em 11 Pgsdpfxjzcnt As Altop

Stanje: dober (rabljeno), Weinig Em 4 Pgjdpfozcnwuex Altep

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Sheet thickness 1.20 mm ST Shaft length 140 mm Roller diameter 62.0 mm Throat depth 100 mm Total power requirement manual kW Machine weight approx. 50.0 kg Space requirement approx. 560 x 220 x 500 mm Exhibition machine - like NEW Has not been in use (!!) Special price on request Description: Pedpoxacilsfx Altogp - 8 pairs of beading and flanging rolls included in delivery - For economical production of various types of beads - High precision due to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast construction in modern design - Extended field of application thanks to 8 pairs of optionally available rolls - Upper shaft adjustable

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Sheet thickness: 2.5 mm steel Shaft length: 250 mm Roll diameter: 96.0 mm Throat depth: 160 mm Pedpfoxachzox Altsgp Rolling speed: 6.0 + 13.0 rpm Total power: 1.5 kW Weight: 350 kg Dimensions (L x W x H): 1400 x 550 x 1120 mm Demo machine - as NEW Never been in use (!!) Special price on request Features: - 4 pairs of bead and flanging rolls included - Sturdy bead forming machine with motor-driven rollers - Lower roller with adjustable stop - For economical production of various bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - High-performance drive motor, suitable for continuous operation - 1 mobile foot switch for forward and reverse operation - Machine base included