Optimum F110 E nakup rabljenega (70.052)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optiturn L34 HS CNC lathe - Directly from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of grey cast iron - Sophisticated spindle bearing system - Emergency stop punch button Ljdoymlfkspfx Ahushh - Central lubrication - Spindle and feed motors supplied by Siemens - Maintenance-friendly protective enclosure - Rear service access panel for maintenance - Safety interlock on the front sliding door - Turret is located behind the turning center (left-hand turning tools) - Linear guideways - "SINUMERIK 808D on PC" software package included (practical training software that allows workpieces to be programmed and simulated offline on a PC; free to download) Technical Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle mount: DIN 6350 A2-3 - Spindle bore: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine Data - Center height: 165 mm - Center distance: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 - 3500 rpm Tool Turret - Type: Electric - Number of tool stations: 6 tools - Maximum square tool size (height/width): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance, subject to liquidity.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optiturn Premium CNC lathe, direct from the manufacturer. S600M – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control system. • Heavy-duty design • Renishaw probing arm for manual tool measurement • Ball screw drive with enhanced accuracy, rigidity, and thermal stability • Siemens servo motors on all axes • All servo motors with integrated encoder for highest precision • 45° slant-bed design for particularly large components • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool positions and driven tools • Hardened and precision ground ball screws for high rapid traverse speeds on all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling switch and emergency-stop strike switch greatly facilitates program setup • Belt-type chip conveyor • Work lamp for full illumination of the workspace • Coolant system with cleaning gun Linear guides • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic VDI 40 turret • All 12 stations powered by an integrated motor designed for speeds up to 4,000 rpm Machine bed • Heavily ribbed • 45-degree slant • High stiffness and durability • Facilitates chip removal SAFETY Integrated – Setup operations with door open • Functional safety also protects against high costs! Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Manage network drives • 3-D simulation • Path tracking SIEMENS OSS Plus additional packages • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 Dimensions and weights Length approx. 4570 mm Width/depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Ledpfx Aeymk Ukehushh Work areas Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-axis (optionally ex works) Angular accuracy: 51" Repeatability: 20" Motor torque X-axis: 11 Nm Z-axis: 11 Nm Speed range Speed range: 30 – 4000 rpm Rapid traverse speed X-axis: 24 m/min Z-axis: 30 m/min Electrical data Supply voltage: 400 V Line frequency: 50 Hz Electrical connection Total connected load: 40 kVA Accuracy Repeatability: ± 0.002 mm Positioning accuracy: ± 0.004 mm Chuck through-hole diameter: 51 mm Slant-bed angle: 45° Tailstock Taper: MK 5 Quill travel: 100 mm Quill diameter: 100 mm Quill actuation: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Main spindle hydraulic chuck: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Vertical spindle Drive motor power, continuous S1: 11 kW Drive motor power, S6-30% duty: 22 kW Drive motor torque: 70 Nm Drive motor torque, S6-30% duty: 140 Nm Feed force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool changer Type: Servo VDI 40 – DIN 5480 Number of tool positions: 12 Drive motor power: 4.82 kW Permissible maximum speed at tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe – direct from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and long service life. Dimensions and Weights Max. width/depth: 2300 mm Length approx.: 2530 mm Width/depth approx.: 1595 mm Height approx.: 1795 mm Weight approx.: 2600 kg Working Ranges Chuck diameter: 150 mm Chuck actuation: Hydraulic Center height: 223 mm Distance between centers: 850 mm Swing over bed: 446 mm Swing over gap: 520 mm Swing over cross slide: 240 mm Bed width: 300 mm Motor Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor power: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis pitch P: 5 mm Lhedpoymkwrefx Ahueh X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis pitch P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Bar capacity diameter: 40 mm Motor(s) Drive motor torque: 33 Nm Tailstock Taper: MT 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity diameter: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tool positions: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous-duty drive motor power S1: 7 kW Drive motor power S6-30% duty: 16 kW Drive motor torque: 33 Nm Drive motor torque S6-30% duty: 80 Nm Feed Rate X-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: Hydraulic; VDI 30 Number of tool stations: 8 Max. tool holder height/width (square): 20 x 20 mm Max. boring bar holder diameter: 25 mm • SIEMENS spindle and servo motors • Fully enclosed with safety device • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swivelling operator panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-liter coolant tank • RJ45 interface, USB port, and 230 V power outlet • Electromagnetic compatibility (EMC) • Six leveling feet • Operator's tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Remnant detection and machining • ShopTurn step programming • Manage network drives • 3-D simulation • Graphic tracking Control • 10.4" color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guideways • Robust flat-bed guides Ball Screw • High rapid traverse speeds in all axes • Reduced wear • High positioning and repeat accuracy

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. - All linear guides with stainless steel covers - Automatic central lubrication - SIEMENS servo drive on all axes (open-loop control) - Max. spindle speed: 4000 rpm - Work area machine light - Portable electronic handwheel with enabling switch and emergency-stop slam switch. Greatly simplifies program setup - Tool changes by push button - Large access doors to minimize cleaning and maintenance time - Software package 'SINUMERIK 808D on PC' included (practical training software for offline programming and simulation of workpieces on PC; available for free download) SINUMERIK 808D ADVANCED – CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC system. The compact and user-friendly entry-level solution is used for basic milling applications. Features such as simple operation, commissioning, and maintenance make it the perfect foundation for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel with IP65 protection class, the SINUMERIK 808D ADVANCED is ideally prepared for operation in harsh environments. Its compact dimensions make it suitable for installation in smaller machines. INCLUDED - RJ45 Ethernet port - 8.4" LCD color display with 800 x 600 resolution - Remote maintenance ready Dimensions & Weights - Length: approx. 1410 mm - Width/depth: approx. 1372 mm - Height: approx. 2007 mm - Weight: approx. 1000 kg Drilling/Milling capacity - Max. cutter head size: 50 mm - Max. shank cutter size: 25 mm Lhedpfx Ahsymkkfoujh Electrical Data - Connection voltage: 400 V - Network frequency: 50 Hz - Electrical connection - Total connected load: 5 kVA Horizontal Milling Table - Length: 620 mm - Width: 180 mm - Distance vertical spindle – milling table min.: 50 mm - Distance vertical spindle – milling table max.: 295 mm - T-slot size: 12 mm - Number of T-slots: 3 - T-slot spacing: 50 mm - Maximum load capacity: 30 kg Accuracy - Repeatability: ± 0.02 mm - Positioning accuracy: ± 0.01 mm Coolant/Lubricant System - Coolant pump drive power: 95 W - Tank capacity: 30 l Travel - X-axis (auto): 355 mm - Y-axis (auto): 190 mm - Z-axis (auto): 245 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 4000 rpm - Note: max. spindle speed must be reduced by approx. 20% during continuous operation - Drive motor power S1 (continuous): 1.5 kW - Drive motor power S6-30% (intermittent): 2.2 kW - Drive motor torque S1 (continuous): 9.5 Nm - Drive motor torque S6-30%: 14 Nm Feed Rate - X-axis: 10,000 mm/min - Y-axis: 10,000 mm/min - Z-axis: 10,000 mm/min Feed Motor Torque - X-axis S1 (continuous): 1.9 Nm - Y-axis S1 (continuous): 3.5 Nm - Z-axis S1 (continuous): 3.5 Nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine – direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out for its performance, speed, precision, and long service life. • Machine in column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive in all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop button significantly facilitates program setup • Coolant system with a 70-liter coolant tank • Tool changes carried out automatically or by pressing a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled worktable – large, dimensionally stable, and precision ground for high accuracy • Very generously sized access doors to minimize cleaning and maintenance time • LED machine lamp for complete illumination of the work area • SIEMENS add-on package: material defect liability and free on-site service OSS SINUMERIK 808D • Software package with identical control layout, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoder – no homing required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS add-on package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 • Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical specifications Connection voltage: 400 V Mains frequency: 50 Hz Electrical connection Total connected load: 10 kVA Milling table (horizontal) Length: 690 mm Width: 225 mm Distance vertical spindle–table min.: 90 mm Distance vertical spindle–table max.: 410 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 150 kg Accuracy Repeat accuracy: ± 0.015 mm Positioning accuracy: ± 0.015 mm Pneumatic connection Operating pressure: 6 bar Travel X-axis (automatic): 330 mm Y-axis (automatic): 220 mm Z-axis (automatic): 320 mm Ljdpfx Ahoymkdxjujhh Distance spindle–column min.: 280 mm Distance spindle–column max.: 280 mm Vertical spindle Spindle taper: BT 30 Speed range: 10,000 rpm Drive motor power S1 (continuous): 3.7 kW Drive motor power S6-30%: 5.5 kW Drive motor torque S1 (continuous): 24 Nm Drive motor torque S6-30%: 36 Nm Feed rate X-axis: 15,000 mm/min Y-axis: 15,000 mm/min Z-axis: 15,000 mm/min Feed motor torque (continuous, S1) X-axis: 3.5 Nm Y-axis: 6 Nm Z-axis: 6 Nm Tool changer Design: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is located in the showroom. Optimill F 80 CNC milling machine, directly from the manufacturer. Lhodsymkcujpfx Ahujh F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control stands out thanks to its performance, speed, precision, and long service life. • Column-type machine frame made from cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drives on all axes (closed-loop control) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop facilitates program setup • Coolant system with 70-litre coolant tank • Tool change can be performed automatically or at the push of a button (electropneumatic tool clamping) • Massive, precise milling table – large dimensions and precision-machined surface • Large access doors to minimize cleaning and maintenance time • LED machine light for full illumination of the work area SINUMERIK 808 ADVANCED Compact and robust Communicative • Front USB panel (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly • Technology-specific keyboard layout • Hard keys with protective membrane Process-safe • LED tool number display • MCP with rotary switch for feed and spindle override Comprehensive package • RJ45 Ethernet port • Prepared for remote maintenance • AST function; enables easy optimization for higher dynamic and accuracy requirements • Absolute encoder / no homing sequence required • Higher accuracy Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X axis 20 m/min Y axis 20 m/min Z axis 20 m/min Electrical data Connected voltage 400 V Line frequency 50 Hz Total power requirement 12 kVA Milling table (horizontal) Length 800 mm Width 260 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Precision Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump motor power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Traverse paths X axis (automatic) 450 mm Y axis (automatic) 260 mm Z axis (automatic) 450 mm Distance spindle – column max. 370 mm Vertical spindle Spindle taper BT 40 Speed range 50 – 10,000 rpm Note on speed range: Maximum continuous spindle speed must be reduced by about 20% for continuous operation Drive motor rated power (S1) 3.7 kW Drive motor power (S6-30% duty) 5.5 kW Drive motor torque (S1) 24 Nm Drive motor torque (S6-30% duty) 36 Nm Feed motor torque X axis (S1) 6 Nm Y axis (S1) 6 Nm Z axis (S1) 11 Nm Tool changer Type: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 7 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, The machine is currently on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. - Heavy-duty design - High productivity - Linear guides for rapid traverse speeds in all axes - 21-tool magazine automatic tool changer - High reliability - Machine body cast from high-quality Meehanite cast iron - Precision-ground cross table with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws in all axes - High-torque servo drives mounted directly to the ball screws in all 3 axes - Electronic handwheel - Chip conveyor - Cleaning gun - RJ45 connection, USB port, and 230V power supply - Coolant system with 210-liter coolant tank - Heat exchanger Included options: - PPU 290 Touch Panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing is available through Siemens Finance. Liquidity is required. Dimensions and Weights - Length approx. 2,315 mm - Width/Depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling and Milling Capacity Lhjdpfx Ajymkbqohuoh - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - AC current - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Min.: 150 mm - Max.: 450 mm T-slot size: 14 mm Number of T-slots: 3 Distance between T-slots: 125 mm Maximum load capacity: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Drive power per coolant pump: 370 W - Tank capacity: 120 l Control System - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look Ahead: 150 - Number of tools: 512 Travel - X-axis automatic: 500 mm - Y-axis automatic: 400 mm - Z-axis automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Drive motor output (continuous operation S1): 12 kW - Drive motor output (S6-30% duty cycle): 22.8 kW - Drive motor torque (continuous operation S1): 38 Nm - Drive motor torque (S6-30% duty cycle): 116 Nm Feed Motor Torque - X-axis (continuous operation S1): 6 Nm - Y-axis (continuous operation S1): 6 Nm - Z-axis (continuous operation S1): 11 Nm Servo Tool Changer - Type: Carousel in front of the spindle - Number of tool positions: 21 tools

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F 200 HSC Premium CNC milling machine, direct from the manufacturer. F 200 HSC – The OPTIMUM premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Profile rails with roller guides enable high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, generously dimensioned and ground for precision · The portable electronic handwheel with enabling switch and emergency stop button greatly facilitates program setup · Coolant system with chip flushing and cleaning gun · Through-spindle cooling with 20 bar · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 connector and 230 V power outlet · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents dirt particle ingress · Machine light in the work area · SIEMENS extended warranty package for material defects plus free online/on-site OSS Plus service · 1-year Basic maintenance contract included (valid in Germany/Austria/Switzerland) Milling spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Motor torque S1 operation: 50 Nm Drive motor S6-30% operation: 26.4 kW Motor torque S6-30% operation: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant lubrication system Pump output (3 pumps): 1 kW Flow rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations free): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel Ledpfx Ahoymd Hmsujhh X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drives Rapid traverse X, Y, Z: 48 m/min Motor torque X/Y/Z: 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z: 5.34 kN / 5.34 kN / 6.68 kN Spindle speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6–8 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–650 mm Table dimensions (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. load capacity: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg !!!Image optionally shown with 3D printer, not included in the price!!!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine equipped with the Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guides with roller bearings in all axes for high load capacity • High-torque servo drives mounted directly to the ballscrews in all three axes • Precision-ground, preloaded, high-performance ballscrews for rapid traverse speeds in all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with up to 15,000 rpm and inline spindle • Solid, precise milling table with five T-slots, generously dimensioned and precision-ground • Portable electronic handwheel with enabling button and emergency stop button greatly simplifies program setup • Tool changer with double gripper and 30-tool capacity • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant supply at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Work area machine lamp • Additional Siemens package: material defect liability and free Online-/On-site-Service OSS Plus • 1-year Basic maintenance contract included in DE/AT/CH • Control system features • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Siemens OSS PLUS add-on package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 • Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 18 mm Lhsdsymd Epopfx Ahush • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous operation 96 Nm • Drive motor torque S6 30% operation 250 Nm • Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN • Feed motor torque • X-axis continuous operation S1 20 Nm • Y-axis continuous operation S1 20 Nm • Z-axis continuous operation S1 36 Nm • Tool changer • Double arm gripper • Number of tool stations 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool-to-tool change time 2.5 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter guideways for high wear resistance and low friction • Grinding spindle equipped with high-precision bearings • Grinding wheel can be dressed directly on the machine using the built-in dressing device • Digital position indicator • Machine base constructed from rigid, torsion-resistant cast iron for maximum stiffness and stability • Longitudinal, cross, and vertical guideways are backlash-free and self-centering, designed as V- and flat guides • Precision ball screw drives • Central lubrication for guideways and feed screw • All flat guideways are finely scraped, guaranteeing the highest precision for all manual movements • Safety electrical system in 24 V DC • Oversized, isolated handwheels on all three axes • Hydraulic lines in accordance with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swiveling control panel for significantly easier operation • Separate hydraulic unit with heat exchanger to prevent vibration and thermal load • Two-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly lower energy consumption, resulting in considerable cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 phases Current type: AC Network frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Run-out accuracy: 0.005 mm Lhjdpeymdwfsfx Ahujh X-Axis Feed rate: 5 – 25 m/min Package Unit: 1 Scope of Delivery Quantity unit: piece Packaging unit: 1 Digital position display Coolant system Balancing mandrel Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetizing function Equipment Electromagnetic chuck Splash guard table enclosure Automatic demagnetizing device Parallel wheel dressing device Coolant system 40 W Work light: LED lamp Leveling feet

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for secure workpiece fixation with automatic demagnetizing function • High-quality spindle with precision taper roller bearings • Hardened and ground table guideways • Turcite-B coated counterguides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • Grinding wheel can be dressed directly on the machine using the integrated dressing device • Digital position display • Machine base made from robust, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical axes are backlash-free and self-centering, designed as V- and flat guides • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guideways are finely scraped, ensuring maximum precision for all manual movements • 24 V DC safety electrics • Large, decoupled handwheels on all three axes • Hydraulic lines to DIN EN 853 standard • Grinding accuracy: 0.005 mm • Aluminum oxide grinding wheel, grit 46, suitable for all common steel types • Swiveling control panel greatly facilitates operation • Separate hydraulic unit with heat exchanger prevents vibration and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Fitted with an IE3 motor – significantly lower energy consumption, resulting in substantial cost savings Dimensions and Weight Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load 7.5 kW Connection voltage 400 V Mains frequency 50 Hz Surface Grinding Table Clamping area length 400 mm Clamping area width 800 mm Grinding Wheel(s) Outside diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 rpm Run-out accuracy 0.005 mm X-Axis Feed speed 5 – 25 m/min Included Equipment Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump Lhodpfoymduqsx Ahujh LED lamp Electromagnetic clamping plate Demagnetizing function Features Electromagnetic clamping plate Table enclosure splash guard Demagnetizing device Parallel dressing device ✔ Coolant system 125 W Working light LED lamp Leveling feet ✔

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, GT 30 – The OPTIMUM Premium NC Surface Grinding Machine with Siemens Touchscreen Panel. • Electromagnetic chuck for securing the workpiece, featuring automatic demagnetization • High-grade spindle with precision tapered roller bearings • Hardened and ground table guideways • Counter-guides coated with Turcite-B for excellent wear resistance and minimal friction • Grinding spindle equipped with premium precision bearings • Grinding wheel can be dressed directly on the machine using an integrated dressing device • Digital position display • Robust machine base made from torsion-resistant cast iron for maximum rigidity and stability • Play-free and self-centering longitudinal, cross, and vertical guideways configured as V and flat guides • Precision recirculating ball screws • Centrally lubricated guideways and feed screws Lsdpfx Ahjymdtyjujhh • All flat guides are finely scraped to ensure the highest precision in all manual movements • Safety circuits operating at 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines comply with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel (grit size 46) suitable for all standard steels • Swiveling control panel for greatly improved operability • Separate hydraulic unit with heat exchanger eliminates vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly lower energy consumption and substantial cost savings Dimensions and Weights Length: approx. 3200 mm Width/Depth: approx. 2200 mm Height: approx. 2100 mm Weight: approx. 3000 kg Electrical Data Total connected load: 6.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping surface length: 300 mm Clamping surface width: 600 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Radial run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Scope of Delivery Unit of measure: piece Packaging unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit size 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetizing function Equipment Electromagnetic clamping plate Table enclosure splash guard Automatic demagnetizing device Parallel dressing fixture ✔ Coolant system: 125 W Worklight: LED lamp Leveling feet ✔

Stanje: rabljeno, High-Pressure Industrial Water Pumps – 90 kW – 55 bar – 33 m³/h Available: 2 multi-stage industrial pumps for high-pressure water lifting, complete with three-phase asynchronous electric motor and installation baseframe. The pumps come from a snowmaking system and are in good general condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical Data Pump Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multi-stage pump Skid-mounted with flexible coupling Electric Motor Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Configuration Industrial baseframe Flexible shaft coupling between motor and pump Complete group, ready for installation Identification plates present Typical Applications Lodpfxeytgvwe Ahujhh Industrial water pumping systems Pressurization plants Process systems Fire-fighting systems Artificial snowmaking plants Industrial washing systems 2 identical units available.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Power output: 0.85 / 1.5 kW Speed range: 300 - 4000 rpm Speed settings: stepless Lhjdpehpmbbjfx Ahuoh Spindle taper: MK-3 (Morse taper 3) Drilling stroke: approx. 105 mm Spindle reach: 200 mm Weight: 152 kg

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: 442109, Creasing Machine E. Bickel HK3/61, Year 1980 - Serial No. 442109 Online video inspection via Skype video. We would be pleased to welcome your visit – more machines available in stock. Ljdpfx Ajh Axfbehujhh Available immediately – can be inspected. Located at Emskirchen / Nuremberg – test run possible.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), barva: rdeča, skupna masa: 4.500 kg, lastna masa: 3.000 kg, največja dovoljena obremenitev: 1.500 kg, Leto izdelave: 2025, FARMER 815T The modern FARMER 815T telescopic loader – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, as well as service providers in similar industries. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under the supervision of European technicians and based on European technology. The machine is built on a stable frame and can work reliably under all conditions. The comfortable, fully glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Operating weight: 3,000 kg Overall dimensions (L×W×H): 4,100×1,520×2,450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1,500 kg Dump height: 2,200–3,000 mm Lifting height: 3,450 mm Dump reach: 700 mm Wheelbase: 2,100 mm Track width: 1,405 mm Rear frame articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 hp Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated power: 18.8 kW Rated speed: 2,400 rpm Minimum fuel consumption: ≤1,800 g/kW·h HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom lift/lowering time: 7 s Fuel tank capacity: 55 l Lodpfx Ajxp Ibxjhushh Hydraulic tank capacity: 65 l Automatic leveling function: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Axle-mounted, constantly engaged gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKING SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Front tyre pressure: 320 kPa Rear tyre pressure: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the only authorised stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main Kingway branch in Germany. We have an extensive selection with around 100 machines always in stock. We supply machines across Germany, Austria, Switzerland, Italy, and other neighbouring countries, and offer our customers access to all spare parts as well as mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 0 km, barva: rdeča, lastna masa: 2.050 kg, največja dovoljena obremenitev: 650 kg, dvižna višina: 3.330 mm, širina izkopne žlice: 1.160 mm, Leto izdelave: 2025, Oprema: standardna žlica, vilice za palete, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket capacity (m³): 0.25 Max steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Total cycle time (s): 8 Working time (h): 6 Speed (km/h): Low: 10 km/h, High: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Rated voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Rated speed (rpm): Low: 800 rpm High: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder dimension (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge selection of machines in stock, with around 100 machines available at any time. We deliver machinery throughout Germany, Austria, Switzerland, Italy and other neighbouring countries. We also offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus Lsdpfx Ahjw Ufploushh 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), vrsta goriva: dizel, barva: rdeča, skupna masa: 7.500 kg, obratovalna teža: 5.500 kg, največja dovoljena obremenitev: 2.000 kg, Leto izdelave: 2025, The model 825T is the ideal machine for the most demanding construction, electrical, hydraulic, renovation companies, and service providers in related industries. This unit is built on a robust frame and can be operated under all conditions. The comfortable, glazed cab ensures safe and pleasant operation. The machine offers an impressive lifting height of 4.8 m! PERFORMANCE: Rated load capacity: 2,000 kg Operating weight: 5,500 kg Bucket capacity: 1.2 m³ Maximum drawbar pull: ≥34 kN Breakout force: ≥51 kN Max. gradeability: 30° Max. dumping height: 4,006 mm Max. dumping reach: 854 mm Dimensions (L×W×H): 6,200×2,100×2,580 mm Minimum turning radius: 4,043 mm ENGINE: Standard model: YUNEI DEF20CAF4 Type: Vertical, inline, water-cooled, 4-stroke diesel engine No. of cylinders – bore/stroke: 4 – 100 × 125 mm Rated power: 55 kW Max. torque: 250 N·m Minimum specific fuel consumption: ≤243 g/kW·h DRIVELINE: Torque converter: YJ1—26501 Transmission: Split-shaft, power-shift type Gear range: 2 forward, 2 reverse Max. speed: 20 km/h Drive axles: Main reduction – spiral bevel, single-stage Reduction type: Planetary gear, single stage Lhodpfxoxcv His Ahueh Wheelbase: 2,551 mm Track width: 1,650 mm Ground clearance: 310 mm HYDRAULIC SYSTEM: Operating pressure: 16 MPa Lift arm raise time: 4.8 s ± 0.2 s Total cycle time: 9.2 s ± 0.5 s Fuel tank capacity: 80 L Automatic leveling: Yes BRAKING SYSTEM: Service brake: Disc brakes on all four wheels Parking brake: Handbrake TYRES: Type and size: 16/70-20 Front tyre pressure: 0.22 MPa Rear tyre pressure: 0.22 MPa PRICE: €30,500 net €36,295 gross WARRANTY: - Every machine includes a 12-month warranty, extendable for up to two additional years. - After the warranty period, we guarantee our customers access to all spare parts. SERVICE: - We have our own mobile service team, serving all our customers in Germany and abroad. KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. For 25 years, we have been active on the European market, importing and selling around 3,000 to 4,000 machines annually, earning the trust of many customers. KINGWAY DEUTSCHLAND is the only physical distributor of the Kingway brand in Germany. Only here can you view and test all our machines on-site. We are the largest importer of construction and agricultural machinery in Europe and serve as Kingway’s main German branch. We offer a wide selection of machines in stock, with around 100 units available at any time. We supply machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. For our customers, we also provide access to all spare parts and mobile service support. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), vrsta goriva: dizel, barva: rdeča, lastna masa: 2.200 kg, največja dovoljena obremenitev: 600 kg, emisijski razred: Euro 5, prostornina žlice: 0,3 m³, širina izkopne žlice: 1.100 mm, Leto izdelave: 2025, obratovalne ure: 1 h, Modern KINGWAY H180T telescopic loader – professional and durable. This model, with a load capacity of 600 kg, is the ideal equipment for the most demanding sectors in construction, electrical, plumbing, renovation, and similar fields. We also guarantee equipment servicing after the warranty expires. The loaders are manufactured with the input and under the supervision of European technicians. The machine is built with a strong structure and is suitable for use in all conditions. TECHNICAL DATA: ✒︎ XINCHAI engine ✒︎ Power: 18.2/24.5 kW/HP ✒︎ Number of cylinders: 3 ✒︎ Rated load capacity: 600 kg ✒︎ Maximum hydraulic pump pressure: 200 bar ✒︎ Maximum hydraulic pump flow: 42 l/min Lhedpfxewzcb To Ahueh ✒︎ Speed: 3000 rpm ✒︎ Bucket volume: 0.3 m³ ✒︎ Bucket width: 1100 mm ✒︎ Weight: 2200 kg ✒︎ Travel speed: 17 km/h ✒︎ Min. turning radius: 2700 mm ✒︎ Maximum steering angle: ±49° ✒︎ Length: 3820 mm ✒︎ Height: 2310 mm ✒︎ Width (tyres 10.0/75-15.3): 1050 mm ✒︎ Width (tyres 31×15.5-15): 1270 mm ✒︎ Width (tyres 400/60-15.5): 1350 mm ✒︎ Maximum lifting height (fully extended arm): 3526 mm ✒︎ Maximum dumping height (fully extended arm): 3000 mm ✒︎ Maximum lifting height (arm retracted): 2900 mm ✒︎ Maximum dumping height (arm retracted): 2380 mm ✒︎ Discharge distance: 1132 mm ✒︎ Minimum ground clearance: 200 mm ✒︎ Wheelbase: 1540 mm ✒︎ Hydraulic tank capacity: 40 l ✒︎ Fuel tank capacity: 45 l SPECIAL FEATURES: ✒︎ Very high-quality and robust build ✒︎ Euro mount ✒︎ Easy to operate ✒︎ Highly maneuverable ✒︎ Compact and versatile ✒︎ Lighting system ✒︎ Hydraulic quick coupler ✒︎ Third hydraulic circuit for attachments ✒︎ CE certified according to the latest standards and regulations SCOPE OF DELIVERY: ✒︎ One wheel loader / yard loader H180 T ✒︎ Incl. bucket + pallet forks ✒︎ Hydraulic quick coupler ✒︎ Joystick control ✒︎ 4-wheel drive ✒︎ Euro mount ✒︎ Road approval PRICE: €16,050 net €19,100 gross - INCLUDES bucket + forks + quick coupler - For machines maintained by us regularly, we EXTEND the WARRANTY to TWO YEARS - FREE 12-month WARRANTY – after this period, we supply all original spare parts on request! - FREE delivery within a 200 km radius - VAT-free sale possible (VAT number required) - Financing available - We are always at your service! KINGWAY GERMANY is the only official stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe, and the main Kingway branch in Germany. We have a huge selection of machines in stock – around 70 machines are available at any time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts. Book an appointment and come for a test drive!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), kapaciteta rezervoarja za gorivo: 15 l, barva: siv, lastna masa: 1.200 kg, prostornina žlice: 0,3 m³, Leto izdelave: 2025, obratovalne ure: 1 h, The tracked excavator YAMA S15 LITE – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, renovation companies, as well as service providers in similar industries. The YAMA S15 LITE is also equipped with a swing boom, which significantly facilitates operation in confined spaces. We also offer service after the warranty period has expired. The mini excavators are developed and manufactured under the supervision of European engineers. The robust construction ensures that the machine operates reliably under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Ledpfjwzh A Nex Ahujhh Bucket capacity (set of 3 buckets): 0.03 m³ Engine model: LAIDONG Engine output: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Expandable tracks: No Maximum gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Maximum travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Undercarriage width: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. digging radius: 2,400 mm Minimum swing radius: 1,550 mm Max. ground-level digging radius: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 10,3 kW (14,00 KM), barva: rdeča, dvižna moč: 600 kg/m, prostornina žlice: 0,13 m³, Leto izdelave: 2025, The design of the simplified control panel is user-friendly, making operation more convenient and comfortable. Comfortable seat, easy operation Ergonomically designed seats enable long working hours without fatigue. The recommended operator arrangement simplifies the workflow and increases efficiency. High-quality machine body The frame of the mini loader is made of high-grade steel, which increases stability and wear resistance, improving the machine's durability. Stronger machine core A branded engine and high-quality internal components ensure the mini loader’s performance. PERFORMANCE: Model: H130 PRO Rated load: 238 kg Bucket volume: 0.13 m³ Max. lifting force: 600 kg Travel speed: 0–4.2 km/h Hydraulic pressure: 18.5 MPa Lifting time: 4.7 s Lowering time: 3.2 s Dumping time: 4.6 s Gradeability: 30% Operating weight: 780 kg ENGINE: Brand: KOOP Model: 192F Type: 1-cylinder, diesel Power output: 14 HP / 3600 rpm Fuel consumption: ≤ 2.3 l/h Start: electric Tank capacities Fuel tank: 5.5 l Engine oil: 1.65 l Hydraulic oil: 23 l DIMENSIONS: Length with bucket: 2373 mm Width with bucket: 1050 mm Width without bucket: 1010 mm Height with ROPS: 1867 mm Height without ROPS: 1291 mm Track width: 800 mm Ground clearance: 180 mm WORKING RANGE: Max. working height: 2572 mm Height to bucket hinge pin: 1953 mm Max. dump height: 1484 mm Dump reach: 561 mm Dump angle at max. height: 29° Rollback angle of bucket at ground level: 24° PRICE: €6,900 net €8,211 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. Lhedpfx Ahew Ufqisueh We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge selection of machines in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: bencin, kapaciteta rezervoarja za gorivo: 10 l, barva: rumena, obratovalna teža: 500 kg, dvižna moč: 350 kg/m, dvižna višina: 1.600 mm, Leto izdelave: 2025, Oprema: pogon na vsa štiri kolesa, The KINGWAY HERACLES H130 is a surprisingly compact machine with impressive capabilities, equipped with a hydrostatic 3WD drive. Thanks to its compact dimensions and a turning radius of just 993 mm, it offers exceptional maneuverability, making it ideal for work in confined spaces. The machine features a mounting plate compatible with "Avant" and "Multione" attachments, further enhancing its versatility. With a maximum lifting capacity of 350 kg and a tipping load of 400 kg, this model is an excellent choice for agriculture, construction, and larger private properties. Its low operating weight of 500 kg and easy transportability make it an ideal solution for users seeking a mobile and versatile machine. The KINGWAY HERACLES H130 is perfectly suited for agricultural businesses, construction companies, electrical and plumbing firms, as well as renovation service providers and similar sectors. We also offer customer-specific service after the warranty period. All machines are assembled under European technical supervision and are based on a robust design for reliable operation under all conditions. TECHNICAL DATA: Model: H130 Operating weight: 500 kg Lifting height: 1600 mm Engine: PETROL Fuel type: Petrol Cylinders: 2 Displacement: 740 cm³ Emission standard: EU Stage V & EPA Tier 4 Final Max. torque: 47 Nm at 2,500 rpm Cooling system: Air-cooled Operating voltage: 12 V Lsdpfx Ahswifvcsushh Battery: 20 Ah Max. tipping load: 400 kg Max. lifting capacity: 350 kg Cab: None Travel speed: 0~15 km/h Steering angle: 0~360° Turning radius (inside/outside): 0/993 mm Standard tires: 18×9.50-8 Fuel tank: 10 l Hydraulic oil tank: 10 l Hydraulic flow: 29 l/min Hydraulic pressure: 160 bar Transmission type: Hydrostatic Length: 1854 mm Width: 993 mm Bucket width: 1000 mm Height: 1304 mm THE MACHINE COMES WITH DIFFERENT TIRES THAN THOSE SHOWN IN SOME OF THE PHOTOS. THE CURRENT TIRES ARE DISPLAYED IN THE LAST TWO IMAGES. PRICE: Net: €6,600 Gross: €7,854 WARRANTY: Each machine includes a 12-month warranty, extendable by an additional year. After the warranty expires, we ensure all spare parts remain fully available for our customers. SERVICE: We operate our own mobile service that provides support to all our customers both in Germany and abroad. KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. With 25 years of experience on the European market, we import and sell around 3,000 to 4,000 machines each year, earning the trust of countless customers.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 52,96 kW (72,01 KM), vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 120 l, barva: rdeča, lastna masa: 7.700 kg, največja dovoljena obremenitev: 3.000 kg, emisijski razred: Euro 5, Leto izdelave: 2025, obratovalne ure: 1 h, Oprema: kabina, pogon na vsa štiri kolesa, EQUIPMENT AND ADVANTAGES: - Electric-hydraulic joystick for easy one-handed control - Hydraulic quick coupler and front hydraulic connection for fast tool changes - Electro-hydraulic proportional control for precise operation - Pivoting frame with leveling function for increased stability - Radio with USB and Bluetooth - Load securing indicator for improved safety - Cabin doors can be opened separately at the top and bottom - Three wipers (front, top, rear) for optimal visibility - Efficient coolers for hydraulic oil, torque converter, and water TECHNICAL DATA: Model: 830 Load capacity: 3,000 kg Max. lifting height: 8,000 mm Operating weight: 7,700 kg Engine: Yanmar 4TNV98CT, 53.7 kW / 72 hp Rated speed: 2,500 rpm Cooling system: Liquid-cooled Engine type: 4-cylinder, 4-stroke diesel DIMENSIONS: Length (without attachments): 7,400 mm Width: 2,195 mm Height to cab roof: 2,600 mm Bucket size (L × W × H): 1,850 × 1,300 × 900 mm Telescopic arm movements: Rotation: 42° Lifting time: 11.5 s Lowering time: 9 s Extension time: 6 s Retraction time: 11 s Bucket tip: 3.5 s Bucket emptying: 3 s HYDRAULICS: Working pressure: 28 MPa Pump capacity: 117 l/min Tank capacity: Fuel: 120 l Hydraulic oil: 160 l Further details: Tyres: 16/70-24 Brakes: Disc brakes Transmission: Hydrodynamic Max. speed: 34 km/h Gears: 4 forward / 4 reverse Shifting: Electro-hydraulic + mechanical Drive: All-wheel drive Steering angle: 27° Track width: 1,760 mm Wheelbase: 2,800 mm PRICE: €50,500 net Lsdpfx Aewzb Ufehujhh €60,095 gross

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 55 l, barva: rdeča, lastna masa: 3.000 kg, največja dovoljena obremenitev: 1.500 kg, dvižna višina: 3.300 mm, emisijski razred: Euro 5, tip droga: teleskopski, prostornina žlice: 0,6 m³, širina izkopne žlice: 1.670 mm, Leto izdelave: 2025, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies in related industries. We also provide equipment servicing after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust framework and can operate under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Ledpfxjw Ufixo Ahuohh Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL SPECIFICATIONS: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes WORKING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (top of mounting): 3.0 m Maximum lifting height (top of bucket): 3.3 m Dump height (45°): 2.05 m Maximum payload (at tool carrier): 1.5 t Bucket width: 1.67 m Bucket capacity: 0.6 m³ Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick coupler system * 2x hydraulic circuits * Reversing camera * Heater * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lighting PRICE: €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge selection of machines in stock, with around 100 units always available. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also provide customers with access to all spare parts and mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, barva: rumena, lastna masa: 990 kg, Leto izdelave: 2025, obratovalne ure: 1 h, Now only €6,500!! BAGGER 1000 – professional and durable. The BAGGER 1000 model is the ideal equipment for even the most demanding construction, electrical, hydraulic, repair, and service companies in related industries. We also guarantee equipment servicing after the warranty period expires. The mini excavators are manufactured based on and under the supervision of European engineers. The machine features a robust structure and is capable of operating in all conditions. TECHNICAL DATA: - Weight: 990 kg - Engine: Koop - Number of cylinders: 1 - Euro 5 - Oil cooler: YES - Maximum speed: 1.3 km/h - Maximum gradeability: 30° - Pump type: Gear pump WORKING RANGE: - Maximum digging reach at ground level: 2,850 mm - Maximum digging depth: 1,650 mm - Maximum dumping height: 2,610 mm - Maximum discharge height: 1,850 mm - Maximum vertical digging depth: 1,375 mm - Dozer blade lift height above ground: 345 mm - Dozer blade lowering depth: 255 mm Ljdow Ufraspfx Ahujhh DIMENSIONS: - Overall length: 2,300 mm - Overall height: 2,300 mm - Overall width: 930 mm PRICE: Net: €6,500 Gross: €7,735 - INCLUDES 3 digging buckets (20, 40, 80 cm) - For machines that are regularly serviced with us, we extend the warranty to three years (warranty applies exclusively to machines purchased directly from us – not through other dealers). - FREE 12-month WARRANTY – after this period, we offer any original spare parts as needed! - We offer our own mobile service team that can reach all our customers in Germany and beyond. - FREE delivery within a 200 km radius - Sale WITHOUT VAT possible (only with valid VAT ID number) - FINANCING available. KINGWAY DEUTSCHLAND e.K. is the only on-site distributor of the Kingway brand in Germany. Only with us can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a large selection of machines in stock—with around 70 models available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide our customers with unrestricted access to all spare parts. Schedule an appointment and come for a test drive!