Mse Micro Centaur nakup rabljenega (1.112)

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, STAR SH-12 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - STAR SH-12 CNC automatic lathe - Bar feeder Fgodpfx Abevllmhstoc - Coolant pump - Transformer For the exact scope of supply, please refer to the photos. We do not assume any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), STAR SR-20R Swiss-Type Automatic Lathe TECHNICAL DATA Spindle bore: 20 mm Turning length: 205 mm Fgsdou Hkh Rspfx Abtjc Spindle speed range: 500 – 12,000 rpm Spindle motor power: 2.2 / 3.7 kW X-axis travel: 265 mm Counter spindle speed range: 500 – 8,000 rpm Counter spindle motor power: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: linear tool holders, front tool post, backwork machining SCOPE OF SUPPLY Includes (but is not limited to): - STAR SR-20R Swiss-type automatic lathe - LNS bar feeder - Transformer - Coolant pan - Exact scope of delivery as per photo documentation We do not assume liability for the accuracy, completeness, or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Electrical Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery Fgjdpswi Ty Ajfx Abtsc No guarantee is given regarding the accuracy, completeness, or currency of the information provided.

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), STAR ECAS 32 T CNC Automatic Lathe - Very good condition - Extensive range of accessories included - Detailed photo series available in the PDF catalogue TECHNICAL DATA Max. machining diameter: 32 mm Max. headstock stroke: 350 mm Tool post: First turret: 10 stations Second turret: 10 stations Number of turning tools: Max. 2 tools per station Tool shank: 16 mm Sleeve holder: Number of tools: Max. 3 tools per station Max. drilling capacity: 23 mm Max. tapping capacity: M12 x P1.75 Max. die cutting capacity: M12 x P1.75 Driven tool attachment: Number of tools: Max. 2 tools per 1 station Max. drilling capacity: 10 mm Fodpfx Abjl R Ix Setjgc Max. tapping capacity: M8 x P1.25 Max. milling capacity: 12 mm Max. slotting capacity: 2 mm x 10 mm Main spindle min. indexing degree: 0.01° Main spindle speed: 7,000 rpm Driven tool spindle speed: 5,700 rpm Coolant tank capacity: 230 l Dimensions: 3,175 x 1,745 x 1,860 mm Centre height: 1,084 mm Weight: 5,700 kg Power consumption: 8.0 kVA No guarantee is given for the correctness, completeness or currentness of the information provided.

Stanje: dober (rabljeno), STAR SV-20 CNC Automatic Lathe TECHNICAL DATA OF CONTROL AXES Rapid traverse X, Y: 15,000 mm/min Rapid traverse A, B: 15,000 mm/min Rapid traverse Z1, Z2, E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. tapping capacity: Stationary: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Fgjdpfx Absiq Dp Njtjc Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for front ejection: 150 mm Max. part release length: 75 mm Sub spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2,670 x 1,375 x 1,650 mm Weight: 3,400 kg No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Stanje: skoraj kot novo (rabljeno), Neto teža: 410 kg Premer koles: 600 mm Moč motorja: 2,2 kW Fsdpfx Absy Skx Ustsgc Premer izsesovalnega priključka: 100 mm Obseg nagiba mize: 0–20° 715 o/min Varnostni gumb CE oznaka Leto proizvodnje: 2001

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 34.500 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, OPREMA: Fgsdpfx Asy Hq Tzjbtjc Krmilnik FANUC 18i Obdelava na zadnji strani Sinhronsko vreteno Pogonska orodja C-os Transportni trak za dele Magazin za nalaganje palic FMB TURBO 3-26

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, CNC dolgostružni avtomat Znamka: STAR Tip: SR-20 Letnik: 1998 z: krmiljenjem FANUC 16-T obdelava zadnje strani sinhronsko vreteno pogonska orodja C-os magazin za podajanje palic FMB TURBO 3-26 Fodey Hg Hdopfx Abtjgc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 1.000 mm, širina brušenja: 500 mm, Stroji so takoj pripravljeni za delo. Microstatic ima magnet 1000x650 mm, Delta ima magnet 1000x500 mm. Fsdpfx Abex Ara Sotegc

Stanje: rabljeno, Leto izdelave: 2004, Frekvenca: 50 Hz Teža stroja cca 2,510 t 3-osni obdelovalni center Microcut Challenger 2412 Tehnologije: vrtanje / rezanje navojev, oblikovno rezkanje (3D), rezkanje, HSC-rezkanje brez primeža Velikost mize: 30" x 14,3" Največja obremenitev mize: 550 lbs X-os: 24" Y-os: 12" Z-os: 20,47" Vrtljaji vretena: 8.000 min⁻¹ Konus vretena: 40 Fodpfx Abexgv D Astsgc Vretenov motor: 5,5 KM ATC: 16

Stanje: zelo dobro (rabljeno), For sale: professional Schneider Electric Masterpact NW25 H1 circuit breaker with Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—low-voltage switchboards, manufacturing plants, industrial halls, and energy installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection for installations against overloads and short circuits. Device is in very good visual and technical condition—the exact state can be seen in the photos. Fedpsyua Amjfx Abtegc Technical data: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operational voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of manufacture: 2011 Assembly: Schneider Electric Venray (Netherlands) The circuit breaker provides protection against overload and short-circuit and allows for adjustable protection parameters thanks to the Micrologic unit. Applications: - Low-voltage switchboards - Industrial plants - Power installations - Power distribution systems - Large machinery and production lines ✔ Robust industrial design ✔ High short-circuit breaking capacity ✔ Adjustable Micrologic protection ✔ Equipment from the renowned manufacturer Schneider Electric

Stanje: skoraj kot novo (rabljeno), Do you have large quantities of components to sell? We are interested in purchasing bulk lots (capacitors, crystals, ICs, resistors, shunts, transistors, FETs, relays, transformers, switches, semiconductors, SMD components, and anything else typically found on a circuit board, as well as related accessories). We are also interested in surplus and clearance items from electronics manufacturing. Fgodjizi Twopfx Abtsc Please contact us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 172822005, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain TNC530i, največja hitrost vretena: 18.000 obr/min, TEHNIČKI DETALJI Hod X ose: 600 mm Hod Y ose: 500 mm Hod Z ose: 500 mm Zakrivna osa A: ±120° Rotaciona osa C: 360° Prečnik rotacionog stola: 500 mm Maksimalna brzina vretena: 18.000 obrtaja/min Brza hod X ose: 36 m/min Brza hod Y ose: 36 m/min Fedsy S Ua Njpfx Abtjgc Brza hod Z ose: 36 m/min Broj mesta u magacinu alata: 24 Poziciona tačnost: 0,01 / 300 mm Ponavljajuća tačnost: ±0,01 mm DETALJI MAŠINE Upravljanje: Heidenhain TNC530i Dovod rashladnog sredstva: 20 bar Dimenzije i težina Dimenzije (D x Š x V): 3.015 x 5.050 x 3.000 mm Ukupna težina: 9.000 kg Tip ulaznog napajanja: Trofazna struja Snaga: 60 kVA Frekvencija: 50 Hz Nominalni napon: 400 V Broj faza: 3 + PE Nominalna struja pri punom opterećenju: 100 A Kratkotrajan struja kratkog spoja: 25 kA Maksimalna struja opterećenja: 200 A Osigurač / Nominalna struja: 80 A Radni sati Vreme rada vretena: 6.940 h Rad programa: 7.686 h Ukupno vreme rada mašine: 17.193 h Ukupno vreme rada upravljača: 19.880 h OPREMA Transporter za strugotinu

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2202, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control: IMSNC Oxyfuel cutting table: 3000 x 1500 mm Extraction duct left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions via soft-switch inverter and microprocessor control • Optimal process management through extremely fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition and power source • Operating status and error indication via LED and display • Analog and serial interface for CNC control integration Fedpfxsy Nd Hye Abtogc • Stepless adjustment of cutting current from 10 - 160 A and for marking from 5 - 25 A • Optimal piercing thanks to stepless delay for main arc and adjustable current ramp-up • Adjustable current reduction for corners, start, and end signals of the guidance system • Automatic display of preset cutting current • Serial data transfer for diagnostic purposes on PC Plasma Cutting Technology Contour Cut • Advancement of HiFocus technology for mild steel • Optimized for cutting fine inner and outer contours • High cut quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 in the range of 2-4 • Minimal angular deviation and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No time-consuming reworking – high productivity and low costs • No additional equipment, software, or new consumables needed • Standard equipment Plasma Torch PerCut 200/210 • PerCut 200 plasma machine torch for standard and high-precision bevel cutting • PerCut 210 quick-change torch with threaded lock for fast and convenient fitting • Special torches available for special applications • Higher cutting speeds reduce cost per cut meter • Long service life of consumables saves resources • Narrower kerf, resulting in less emissions and waste • Significantly lower gas consumption compared to competitors due to efficient liquid cooling to the nozzle tip • Lower noise level thanks to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking with the same consumables Power Source HiFocus 161i Mains connection: 400 V; 3-phase; 50 Hz Max. connected load: 28 kVA (100% duty cycle) Main fuse, slow: 50 A Protection class: IP 22 Open-circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: - Maximum: 50 mm - Recommended: 0.5 – 38 mm Maximum piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je bil leta 2025 obnovljen in posodobljen. Posodobitev vključuje dodajanje funkcij samodejnega podajanja in samodejnega cikla. Fsdpsvtl Rpofx Abtogc Dimenzije brusnega kolesa (zunanji premer x notranji premer x širina) Ø 350 x Ø 127 x 100 mm Širina brusnega kolesa: 100 mm Minimalni / maksimalni premer za obdelavo: 1,5 / 50 mm Število hitrosti brusnega kolesa: neskončno Minimalna / maksimalna hitrost regulacijskega kolesa (obr/min): 10/250 obr/min Podajanje: Avtomatsko Samodejni cikel: Da Oblikovanje: Ročno Dimenzije regulacijskega kolesa (zunanji premer x notranji premer x širina): Ø 230 x Ø 76,2 x 100 mm Širina regulacijskega kolesa: 100 mm Največja dolžina za obdelavo v plongeé: 200 mm Dolžina: 1800 mm Širina: 1300 mm Višina: 1600 mm Teža: 2000 kg Dodatki: Nov rezervoar za hladilno tekočino s papirnim filtrirnim sistemom.

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 6.023 h, skupna višina: 2.500 mm, skupna dolžina: 3.500 mm, skupna širina: 2.000 mm, Unladen weight: 5,000 kg Price: On request - Year of manufacture: 2001 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 00600169 - Operating hours: 6,023 - Control: CNC Fgjdpsyk Hbnsfx Abtec - Power [kW]: 15.0 - Number of axes [pcs.]: 4 - X-axis travel [mm]: 1,020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 510 - Table length [mm]: 1,150 - Table width [mm]: 500 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8,000 - Options: Chip conveyor, external cooling, tool magazine - Transport dimensions: 3,500 mm x 2,000 mm x 2,500 mm (L x W x H) - Transport weight [kg]: 5,000 kg - Number of transport packages: 1 Financial Information VAT: The listed price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Lukas van Rossum

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, maks. debelina aluminijaste pločevine: 35 mm, skupna masa: 4.000 kg, skupna širina: 2.000 mm, skupna dolžina: 6.000 mm, delovna širina: 2.000 mm, potovalna razdalja osi X: 6.000 mm, vrsta hlajenja: zrak, okoljska temperatura (maks.): 40 °C, Oprema: dokumentacija / priročnik, Rabljeni MicroStep rezalni stroj SPL 6001.20 P (plazemski sistem) s gorilnikom Kjellberg. Rabljen, delujoč. Pred oddajo bo še očiščen. Možen ogled na lokaciji. Odsesovalni sistem je možno dokupiti. Fsdoy T Exrepfx Abtsgc

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1323, CNC stružnica Star SR-32J Leto izdelave: 2011, Serijska številka: 1323 Fedjyznvpepfx Abtjgc Krmilnik: Fanuc, tip 18i-TB Polžnik za palice: FMB Turbo 3-36 Transporter ostružkov: Mayfran CO2 gasilni sistem: Kraft & Bauer ----- Privlačna ponudba – prilagodljivo in brez skrbi Nudimo vam ne le kakovosten izdelek, temveč tudi financiranje po meri, ki je prilagojeno vašim potrebam. Predplačilo, obročno plačilo ali individualni finančni modeli – skupaj najdemo ustrezno rešitev. Po želji prevzamemo tudi celotno organizacijo prevoza. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, tako da vam ni treba skrbeti za nič. 📞 Za dodatne informacije ali neobvezujočo ponudbo nas kontaktirajte. Svetujemo vam osebno in strokovno.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1324, CNC dolgostrajni avtomat Star SR-32J Leto izdelave: 2011, Serijska številka 1324 Krmiljenje: Fanuc, tip 18i-TB Polnilnik palic: FMB Turbo 3-36 Fedpsyznurjfx Abtjgc Transporter ostružkov: Mayfran CO2 gasilni sistem: Kraft & Bauer ----- Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne le visoko kakovosten izdelek, temveč tudi prilagojene možnosti financiranja, ki ustrezajo vašim potrebam. Plačilo akontacije, obročno odplačevanje ali individualni finančni modeli – skupaj bomo našli pravo rešitev. Na željo prevzamemo tudi celotno organizacijo transporta. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, da se vam ni treba ukvarjati z ničemer. 📞 Za več informacij ali nezavezujočo ponudbo nas kontaktirajte. Z veseljem vam bomo osebno in strokovno svetovali.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1251, CNC stružnica z glavno in protivreteno ter podajalnikom palic Proizvajalec: Star, tip SR-32J Letnik: 2011, serijska številka 1251 Krmiljenje: Fanuc, tip 18i-TB Podajalec palic proizvajalca FMB, tip Turbo 3-36, transporter odrezkov proizvajalca Mayfran, CO2 gasilni sistem proizvajalca Kraft & Bauer ----- Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne le visokokakovosten izdelek, temveč tudi individualne možnosti financiranja, ki se prilagodijo vašim potrebam. Naj gre za polog, obročno odplačevanje ali individualno finančno rešitev – skupaj najdemo pravo možnost. Fgodpfx Aboyzmxpotjc Po želji prevzamemo tudi popolno organizacijo transporta. Od načrtovanja do zanesljive dostave zagotovimo gladek in pravočasen potek, da se vi ne obremenjujete. 📞 Kontaktirajte nas za več informacij ali nezavezujočo ponudbo. Z veseljem vas osebno in strokovno svetujemo.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1306, CNC stružnica z glavno/vzporedno glavo in podajalcem palic Znamka: Star, tip SR-32J Leto izdelave: 2011, serijska številka 1306 Krmiljenje: Fanuc, tip 18i-TB Podajalnik palic znamke FMB, tip Turbo 3-36, transporter za odrezke znamke Mayfran, CO2 gasilni sistem znamke Kraft & Bauer Fjdpfx Abjyzmv Ietogc ----- Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne le kakovosten izdelek, temveč tudi prilagojene možnosti financiranja glede na vaše potrebe. Predplačilo, obročno plačilo ali individualni finančni modeli – skupaj bomo našli pravo rešitev. Na zahtevo prevzamemo tudi celotno organizacijo prevoza. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, tako da vam ni treba skrbeti za nič. 📞 Za dodatne informacije ali nezavezujočo ponudbo nas kontaktirajte. Z veseljem vas strokovno in osebno svetujemo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, proizvajalec krmilnikov: MicroStep, model krmilnika: iMSNC, število osi: 3, This 3-axis plasma cutting machine MicroStep 3001.15P/ME was manufactured in 2021. It offers a working area of 1500x3000 mm, making it ideal for precise and large-scale cutting tasks. If you are looking for high-quality cutting capabilities, you should consider the MicroStep 3001.15P/ME machine, which we have available for sale. Please contact us for further information. • Working area: 1500 x 3000 mm • Permissible sheet thickness: robust design for material thickness up to 100 mm • Guides/drives: high-quality linear guides and backlash-free dual-sided drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic core gas console • Table surface: slatted cover on the cutting table • Height control: "THC" module for automatic height adjustment via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: dual-sided rope safety system (collision protection) for the gantry with emergency stop • Optical signaling: 2-color LED signal tower on the gantry crossbeam • Operator interface: externally mounted MMI console Fgsdpoycvq Ajfx Abtjc • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Leto izdelave 2014 z podajalnikom palic IEMCA Boss 332 Tip 32C, leto 2014. Büchele sistem za odstranjevanje ostružkov. Ojačana oljna črpalka (posebna oprema) z izpiranjem vretena. Signalna luč. Priprava za visok tlak spredaj in zadaj vključena. Kroglični ležaji na odjemnem vretenu so novi (podjetje Star, računi na voljo). Stroj je še vedno v uporabi in si ga je možno ogledati po dogovoru. Rabljeni stroji brez garancije. Fgedpjw Tkcuefx Abtsc

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, CNC stružnica za dolgotrajno struženje Znamka: STAR Tip: SR-32 Leto izdelave: 1999 z: FANUC 16-T krmiljenjem Fedpfxoyzyr Ne Abtjgc obdelava zadnje strani sinhronsko vreteno gnana orodja C-os magazin za podajanje palic FMB TURBO 5-42

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, skupna masa: 4.100 kg, skupna širina: 1.345 mm, skupna višina: 1.780 mm, Premer palice (maks.): 32 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 32i-B, največja dolžina izdelka: 2.690 mm, število osi: 7, This 7-axis STAR MICRONICS SR-32JII-Type A was manufactured in 2017. It features a bar capacity of Ø32 mm, and is equipped with a main spindle and a counter spindle, both with C-axis capability. The machine includes a synchronized guide bushing and a multi-tool plate with 6 positions. If you are looking for a high-quality Swiss-type lathe, consider the STAR MICRONICS SR-32JII-Type A, which we have available for sale. Please contact us for further details. Fjdpfey Am I Hsx Abtjgc • Bar capacity: Ø32 mm • Spindles: Main and counter spindle with C-axis • Guide bushing: Synchronized type (Neukomm) • Cross slides: X-Y / X-Z configuration Standard Equipment • Pneumatic unit • Safety door lock • Cooling unit for spindle and counter spindle • Coolant tank: 255 l with level and flow monitoring • Automatic lubrication system • Work area lighting • Pneumatic cleaning through the counter spindle • Tool breakage detection • Parts conveyor • Electronic hand wheel • RS232/USB interface • CE marking Tool Configuration • Gang tool plate with 6 positions • 5 radial tool positions (incl. 3 powered ER20) • 5 front tool positions (incl. ER16 + ER20) • Powered backworking plate (6 positions) Additional Equipment • High-pressure pre-installation • High-pressure coolant system: 69 bar / 20 L/min • Rear axial drilling/milling unit (ER16) • Chip conveyor • Coolant filtration system Bar feeder • IEMCA BOSS 338/37 HD • Maximum bar length: 3700 mm • Capacity: Ø38 mm Machine hours: 4,000 operating hours Technical Specification Counter Spindle: Yes