Lamina System Semi Automatic Laminator Stroj Za Laminiranje nakup rabljenega (104.876)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Nwodpfjr A Eq Rsx Ah Usg The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Nwodshy Tlrspfx Ah Uog Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Njdpfxjl D Rp Es Ah Uswg Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Nedpfxslc Ewij Ah Uowg Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Nodpfewiwnqsx Ah Uowg Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Nodpsd Supgsfx Ah Uowg Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Nwedpfjt Dx U Ssx Ah Ueg Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device Nwjdjuxqzuepfx Ah Ujg 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Nedpfx Ahjtt Da Dj Uowg Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Nwedpov Hm Nmjfx Ah Ujg Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: Nsdpfjg Nn E Nsx Ah Uswg • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: zelo dobro (rabljeno), Brusilni stroj za nože MVM z vrtljivim magnetom, dolžina 1500 mm Nsdpfx Aey Tpf Njh Ujwg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, vhodni tok: 2 A, vhodna frekvenca: 50 Hz, moč: 0,48 kW (0,65 KM), For sale: Mosca strapping machine P-5, year of manufacture 2006. Suitable for bundling newspapers, magazines, or shipping cartons. The machine was used very little and stored away for 6 years in between. The strapping cycle is triggered manually via foot pedal. Strapping tape: 5 mm; cycle output: 50 to 55 strappings per minute; automatic tape threading and tape end ejection; electronic tension adjustment via potentiometer, with soft tension button. The machine has been fully refurbished and is in very good condition. Frame size: 600 x 500 mm Video available upon request. Viewing and test operation possible by appointment. Delivery free of charge within 200 km of Vienna. We can secure and pack the machine on a pallet for freight forwarding or self-collection. Type: RO-M-P5 Serial number: 87878 Connection type: 1L~N~PE Voltage: 230 V Current type: AC Power: 0.48 kW Frequency: 50 Hz Current: 2.6 A Year of manufacture: 2007 Nedoy Ew N Tjpfx Ah Ujwg Control voltage: V Control current type: DC If you have any questions or need further information, please feel free to send us a message or call us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.250 kN, premer vijaka: 40 mm, delovna prostornina: 217 cm³, tlak vbrizgavanja: 2.377 letvica, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.480 mm, skupna širina: 1.510 mm, skupna višina: 2.190 mm, skupna masa: 6.000 kg, moč: 18,5 kW (25,15 KM), Oprema: dokumentacija / priročnik, In perfect shape. Nwedswlhb Tjpfx Ah Ujg

Stanje: rabljeno, Lokacija skladišča: Sonnefeld Nwjdpfx Ahsway Dce Ueg

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Nedpfx Ahevvkd Te Uswg

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Nodpfx Asvvkfdsh Ujwg Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Stanje: rabljeno, Leto izdelave: 2001, Hrúbka hrany: 0,2 - 6 mm Rozmery obrobku: - Minimálna šírka: 70 mm - Minimálna/maximálna výška: 8 / 42 mm - Minimálna dĺžka pri pásových hranách: 150 mm Posuvná rýchlosť: 12 m/min Valec na nanášanie lepidla Rozmery stroja (d x š x v): 3500 x 900 - 1300 x 1250 mm Hmotnosť: cca 1130 kg Njdpfx Aovvkfqoh Uswg Prípojný výkon: cca 6,0 kW, 400 V, 50 Hz Vybavenie: - Dvojité horné pritláčanie s manuálnym nastavením výšky - Automatický zásobník na rolkové hrany do 800 mm priemeru - Rýchloohrevná lepiaca vaňa s nanášacím valcom v súhlasnom aj protibežnom smere - Pneumatické zapínanie a vypínanie všetkých pracovných jednotiek - Pneumatické kapovacie nožnice pre pásové hrany do 3 mm - Manuálne nastaviteľné vodiacie pravítko - Dvojitá kapovacia píla s 2 vysokofrekvenčnými motormi, 0,2 kW, 12 000 ot./min, 2 automatické pozície (0° + 3°) - Orezávacia/zrovnávacia frézovacia jednotka s 2 vysokofrekvenčnými motormi, 0,43 kW, 12 000 ot./min, obojstranné snímanie, s 2 vysokofrekvenčnými hlavami s otočnými nožmi - Rádiusová stieracia čepeľ, automatické podávanie - Plochá stieracia čepeľ, automatické podávanie Miesto skladovania: Nattheim

Stanje: rabljeno, Leto izdelave: 2002, Dolžina stroja: 6240 mm Teža: 2400 kg Priključna moč: 14 kW Premer odsesovanja: 120 / 140 mm Lokacija skladišča: Nattheim Nwsdjvvkfwspfx Ah Usg

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Nsdpfx Ajxyiiljh Uswg

Stanje: rabljeno, Leto izdelave: 2022, Oscilirajoč valjasti brusilni stroj, tehnični podatki: Možna varianta vijačenja za pritrditev na vretenasti tulec. Uporablja se nekaj podobnega kot naprava ProLoc. Lokacija skladišča: Nattheim. Nwjdpswhqprjfx Ah Uog

Stanje: rabljeno, Leto izdelave: 2022, Oscilirajoč valjasti brusilni stroj, tehnični podatki: Možna varianta vijačenja za pritrditev na vretenasti tulec. Uporablja se nekaj podobnega kot naprava ProLoc. Lokacija skladišča: Nattheim. Nsdpowhqplofx Ah Uswg

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: Nsdpfx Ahey U Dv Ee Uowg - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier

Stanje: rabljeno, Leto izdelave: 1999, Višina roba: 10 - 60 mm Debelina roba: 0,4 - 3 mm Minimalni radij krivulje: 20 mm Hitrost podajanja: 2 - 18 / 4 - 14 m/min. Motor: 5,2 kW Zračni tlak: 6 bar Dimenzije: 900 x 1300 x 1200 mm Teža: pribl. 350 kg Lokacija skladišča: Nattheim Nsdpfsymcrbox Ah Uswg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, številka stroja/vozila: CA90H2 PIPE BENDING ROLL, premer gredi: 90 mm, premer valja: 260 mm, vrtljajska hitrost (min.): 8 obr/min, največja hitrost vrtenja: 8 obr/min, skupna masa: 1.000 kg, skupna dolžina: 1.260 mm, skupna širina: 1.000 mm, skupna višina: 1.260 mm, moč: 3,68 kW (5,00 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, obratovalna hitrost: 8 mm/s, premer valja: 260 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, PROFILBIEGEWALZEN, WELLEN-AUSGANG 90 MM – ROHRBIEGEWALZE MARGI CA90H2, BAUJAHR 2007 WELLEN AUSGANGSGRÖSSE: 90 MM SATZ UNIVERSALWALZEN, DURCHMESSER 260 MM SEITLICHE RICHTWALZEN LINKS/RECHTS, SCHRAUBENVERSTELLUNG 4 WALZENSÄTZE FÜR ROHRBIEGEN: 61 – 78 – 90 – 116 MM KONSOLE ELEKTRISCH FAHRBAR AUF ROLLEN, ALLE BEDIENELEMENTE ZENTRALISIERT DIGITALE ANZEIGE DER WALZENPOSITION OBERE WALZE ANGETRIEBEN, ELEKTROMOTOR MIT GETRIEBE SEITENWALZEN HYDRAULISCH EINZELN VERSTELLBAR MIT KOLBEN MASCHINE REVERSIERBAR – BETRIEB MIT WELLEN VERTIKAL/HORIZONTAL MÖGLICH SICHERHEITS- UND NOT-AUS-AUSRÜSTUNG AN DER MASCHINE INSTALLIERT BEDIENUNGSANLEITUNG UND SCHALTPLAN IM ORIGINAL MIT DER MASCHINE GEWICHT: 1.000 KG ABMESSUNGEN: 1.260 X 1.000 X H 1.260 MM Nodowkrr Topfx Ah Uowg