Ked, Kurt Ehemann G 12,5 X 20 nakup rabljenega (94.632)

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Ncodpfx Alshrnbke Njr Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Stanje: rabljeno, Wall-mounted slewing crane with hoist, slewing drive, and trolley ABUS Wall-Mounted Slewing Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Capacity: 3200 kg Slewing range: 180° Projection (boom tip to wall): approx. 6640 mm Minimum projection (crane hook to wall): approx. 1450 mm Maximum projection (crane hook to wall): approx. 6250 mm Trolley travel: approx. 4800 mm Hook distance from boom tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Boom length without wall bracket (slewing bearing): 6530 mm Overall height with wall bracket (slewing bearing) and additions: 2590 mm (total height) - Boom profile: double-T steel (height 600 x width 220 mm) - Electrically slewed boom via geared motor (2 speeds) - Slewing via electric drive with end and preliminary limit switches Ncodpowzmi Ijfx Al Njr - Slewing angle end positions with electric end and pre-limit switches - Paint finish (ABUS yellow - original paint) - 2 wall flanges 340 x 280 mm, each with 6 holes Ø 27 mm - Mounting surface for wall flanges W x H = 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Reeving: 4/1 Lifting height max.: 6 meters Lifting speed: 5 m/min Creep lifting speed: 0.8 m/min Trolley travel speed: approx. 4.5 and 19 m/min - Controlled via radio remote control and emergency operation via pendant cable - Trolley travel with electric drive, with end and preliminary limit switches - Approx. 20 operating hours - Last inspection April 2024 at 19 operating hours Weight of wire rope hoist: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight boom with wire rope hoist: 1500 kg Very good condition

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 819 h, številka stroja/vozila: G320-00-6069, vrsta goriva: dizel, Lastna teža: 31.200 kg Dvižna zmogljivost: 1.000 kg Delovna višina: 3.400 cm Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Transportne mere (D x Š x V): 7,02 x 2,98 x 3,63 m Za več informacij se obrnite na PFEIFER GROUP. Nedsxwix Ijpfx Al Necr

Stanje: rabljeno, prevoženi kilometri: 642.835 km, moč: 309 kW (420,12 KM), prva registracija: 07/2017, vrsta goriva: dizel, lastna masa: 9.791 kg, največja dovoljena obremenitev: 16.209 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, naslednji pregled (TÜV): 10/2025, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, Oprema: ABS, klimatska naprava, nadzor oprijema, spojka prikolice, tempomat, zapora diferenciala, Lastna masa: 9791 kg, dovoljena skupna masa: 26000 kg, zračno vzmetenje spredaj-zadaj, 1 zračna blazina, dvižna os (brez krmiljene osi), tahograf, BDF menjalni okvir, ASR sistem proti zdrsu pogona, električna stekla, strešno okno, strešni spojler, električni zunanji ogledali, centralno zaklepanje z daljincem, blokada zadnjega diferenciala, hladilnik, - 2 prejšnja lastnika - Nemško vozilo - tehnični pregled/HU/AU potekel/zapadlo, pridržujemo si pravico do napak in sprememb. Nedpfx Aoyut Iiol Necr

Stanje: rabljeno, prevoženi kilometri: 642.835 km, moč: 309 kW (420,12 KM), prva registracija: 07/2017, vrsta goriva: dizel, lastna masa: 9.791 kg, največja dovoljena obremenitev: 16.209 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, naslednji pregled (TÜV): 10/2025, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, Oprema: ABS, klimatska naprava, nadzor oprijema, spojka prikolice, tempomat, zapora diferenciala, Lastna masa: 9791 kg, dovoljena skupna masa: 26000 kg, zračno vzmetenje spredaj-zadaj, 1 zračna blazina, dvižna os (brez krmiljene osi), tahograf, BDF menjalni okvir, ASR sistem proti zdrsu pogona, električna stekla, strešno okno, strešni spojler, električni zunanji ogledali, centralno zaklepanje z daljincem, blokada zadnjega diferenciala, hladilnik, - 2 prejšnja lastnika - Nemško vozilo - tehnični pregled/HU/AU potekel/zapadlo, pridržujemo si pravico do napak in sprememb. Ncedpfxsyat Ugj Al Njr

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 03/2027, vrsta vhodnega toka: trifazni, skupna masa: 1.000 kg, König Mini Rex 4000-S z vzhajalno komoro G 2000 Za okrogle, preluknjane, dolgo valjane in pregibno dolgo valjane ter rustikalne žemljice Glavni stroj z 2 vrstama, nagiben do 45° Kapaciteta do 2400 kosov/uro Vzhajalna komora z 2 vrstama, z dolgim valjarjem in preluknjevalcem Kapaciteta do 2000 kosov/uro Rabljeni stroj Ncjdpfx Aewyrumel Njr Dostavna storitev Obiščite naš veliko skladišče pekarskih strojev!

Stanje: dober (rabljeno), Leto izdelave: 2016, stružna dolžina: 1.585 mm, moč vretenovega motorja: 22.000 W, hitrost vretena (min.): 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 1.585 mm, pomik po osi Z: 230 mm, skupna višina: 3.100 mm, skupna dolžina: 6.100 mm, skupna širina: 3.230 mm, skupna masa: 16.600 kg, Turn-milling center MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Manufacturer: MAZAK Model: Integrex i-200ST x 1500U Control: Smooth Mazatrol Year of manufacture: 2016 5-axis simultaneous EIA/ISO Milling spindle with thread cutting function Additional M-code (1 pair for 2 M-codes) Ncodpsyrcxlofx Al Ner Preparation for RMP-60 Sub spindle with C-axis, C1 + C2 synchronization High-pressure coolant (IKZ) 70 bar at main spindle High-pressure coolant (IKZ) 15 bar at lower turret Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3-jaw chuck Max. turning diameter: 658 mm X-axis: 260 mm Y-axis: 1585 mm Z-axis: 230 mm B-axis: 360° Spindle bore: 76 mm Spindle speed: 5000 rpm Spindle power: 22 kW Sub spindle speed: 5000 rpm Sub spindle bore: 65 mm Sub spindle power: 22 kW Tool changer: 36 stations Driven tool speed: 12,000 rpm B-axis interface: HSK-63 Lower turret stations: 9 Driven tool speed (lower turret): 6,000 rpm Driven tool power: 5.5 kW Length: 6,100 mm Width: 3,230 mm Height: 3,100 mm Weight: 16,600 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, sourced from the manufacturer. This information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 3630 x 1790 x 1760 mm Nodev A Hpfjpfx Al Nscr Weight: 4300 kg Total Power Requirement: 42.6 kW Four-Side Planer - Moulder TIMBERMAX 5-20 High-Speed - Planing width: 20 - 200 mm - Planing height: 8 - 125 mm - Grooving bed - Minimum workpiece length: 590 mm (single) / 150 mm (in series) - 5 spindles - Spindle diameter: 40 mm - Spindle speed: 8,000 rpm - Feed speed, stepless: 10 - 60 m/min - Bottom jointer shaft max. tool diameter: 125 mm - Right vertical shaft max. tool diameter: 100 - 180 mm - Left vertical shaft max. tool diameter: 100 - 180 mm - Top horizontal shaft max. tool diameter: 100 - 180 mm - Second bottom horizontal shaft max. tool diameter: 100 - 180 mm Spindle sequence: 1. Bottom: 5.5 kW 2. Right vertical: 5.5 kW 3. Left vertical: 5.5 kW 4. Top: 7.5 kW 5. Second bottom: 5.5 kW - Feed motor: 7.5 kW - Height adjustment motor: 0.75 kW - Conveyor belt motor: 0.75 kW - Total output: 42.6 kW - Compressed air connection: max. 6 bar - Extraction ports: 5 x 120 mm - Dimensions (LxWxH): 3630 x 1790 x 1760 mm - Weight: 4300 kg Included: - Hard-chrome plated tables - CE standard, TÜV Rheinland certified - Motor-driven rollers in the table - Pneumatic pressure on feed rollers - Feed system with cardan drive - Lubrication pump OPTION: Automatic feeding system with conveyor belt for finger-jointed timber, wood thickness 20~100 mm - Wood width: 20~100 mm - Wood length: 150~450 mm - Centrifugal tray speed: 45 rpm - Centrifugal diameter: 2,100 mm - Total motor power: 3.69 kW - Main spindle motor: 2.2 kW - Separator motor: 0.37 kW - Wood brushing motor: 0.37 kW - Feed motor: 0.75 kW - Conveyor belt unit size: 3,000 x 220 mm - Weight: 1,580 kg

Stanje: skoraj kot novo (rabljeno), vrsta goriva: dizel, Leto izdelave: 2021, CITROEN BERLINGO PODALJŠANA OS, LETNIK 2021, IZOTERMIČNO VOZILO Z HLADILNO ENOTO (ATP FRC -20°C DO 2027, PODALJŠLJIVO), ODSTRANLJIV DVOJNI PREDAL, 191.000 KM, 3 SEDEŽI, KLIMATSKA NAPRAVA, SERIJSKI RADIO, EN LASTNIK, REDNO SERVISIRAN, MENJANA VERIGA, 1 LETO GARANCIJE, MOŽNOST FINANCIRANJA ALI LEASINGA. Ncjdpext Eibsfx Al Nor

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: CTX162-2950-9675, Leto izdelave: 2018, obratovalne ure: 2.210 h, nosilnost: 2.000 kg, dvižna višina: 4.780 mm, prosto dvigovanje: 1.497 mm, vrsta goriva: električni, tip droga: triplex, moč: 88 kW (119,65 KM), širina nosilnega okvirja vilic: 940 mm, lastna masa: 3.745 kg, barva: zelen, Oprema: bočni pomik, osvetlitev, podaljšek vilic, vilice za palete, zaščita za glavo, The electric forklift is in very good and honest condition. The forklift was in operation in Germany, where it was also serviced by specialist companies. The low operating hours and year of manufacture reflect the condition of the machine. Equipment: - Charger - Fork extensions - Side shift - Overhead guard - Rotating beacon - Reversing alarm - Lighting You are welcome to inspect and test drive the forklift. A video will follow shortly! Ncedpfx Ajuzalzjl Ner We are happy to assist you in arranging transport.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: CATXQP20KXPZ00144, vrsta goriva: dizel, moč: 16 kW (21,75 KM), proizvajalec motorjev: Cat C2.2, Namen uporabe: Gradbeništvo Lastna teža: 815 kg Moč generatorja: 20 kVA CE označba: da Stopnja emisij: Stage V / Tier IV final Prostornina rezervoarja za vodo: 56 l Transportne dimenzije (D x Š x V): 1.718 x 1.001 x 1,3 Država proizvodnje: CN Za več informacij kontaktirajte Kennyja Bongersa, Tijmena Pesselse ali Arjena van Dijka. Ncjdpfxot D Uhne Al Nsr = Dodatne možnosti in oprema = - Baterija - Nadzorna plošča - Jeklena streha - Rezervoar

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 41 mm, dolžina tračnega lista: 6.880 mm, Fully automatic horizontal miter bandsaw for cutting angles from +60° to -60° with Siemens control system and 2000 mm material feed conveyor - Double-column guided horizontal bandsaw for cutting solid bars and bar profiles - Siemens S7-1500 control with extensive functionality and operation via large 7" touchscreen display - Supplied as standard with 2000 mm material transporter – frequency-controlled feed via recirculating ball screw and servomotor - Material database with pre-set sawing parameters and cutting curves - Cutting motion via recirculating ball screw and servomotor - With ARP (automatic cutting feed control) – automatic bandsaw blade feed depending on material resistance. Feed speed is continuously adjusted to the current cutting load. ARP allows for shorter processing cycles and longer saw blade life. - Automatic positioning after entering the desired miter angle - Hydraulic clamping of the rotary table enables precise angular cuts - Rigid machine frame and minimal distance between the saw blade, machine guide, and workpiece reduce vibrations for optimum sawing performance - Continuously variable cutting speed from 15 – 150 m/min Nsdex Uk Aropfx Al Necr - Saw blade drive via bevel gear, asynchronous motor, and frequency converter - For straight cuts, material is clamped in front of and behind the cut by a split vice - Hydraulic vise pressure adjustable via control valve with pressure gauge - 7° saw blade inclination and hydraulic blade tensioning increase blade life - Front bandsaw guide moves automatically parallel to the moving vise jaw - Swarf removal brush driven by band wheel - Emulsion cooling with fluid distribution to both the saw blade guides and directly into the cutting channel - LEUZE safety light curtain in front of the machine and the material transporter - More powerful motor optionally available - Saw blade guides with integrated cooling system

Leto izdelave: 2022, stanje: rabljeno, New: No Application: Construction Engine brand: - VAT/Margin scheme: VAT deductible Serial number: 450220265 Transport dimensions (L x W x H): 1.1 x 1.1 x 2.65 Njdpfx Aloucrykj Njcr Please contact PFEIFER GROUP for further information.

Stanje: novo, Bernardo Production Lathe Goliath 500 x 2000 Technical Specifications Distance between centers: 2000 mm Center height: 250 mm Swing over bed: 500 mm Swing over gap*: 720 mm Swing over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (24): 9 – 1600 rpm Longitudinal feed range (80): 0.063 – 6.43 mm/rev Cross feed range (80): 0.027 – 2.73 mm/rev Metric threads (46): 1 – 224 mm Ncjdjxl D Aqspfx Al Nsr Inch threads (44): 1/8 – 28 TPI Tailstock quill diameter: 75 mm Tailstock quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3520 x 1240 x 1550 mm Weight approx.: 3375 kg * Removable gap length: 200 mm Features • Versatile applications in general engineering, production, single-part manufacturing, etc. • The machine bed is cast in one piece, offering exceptional rigidity and vibration damping, ensuring precise turning operations • Modern main spindle bearings using precision angular contact ball bearings • Central, user-friendly controls for feeds and threading, with leadscrew and feed shaft • Rapid traverse in longitudinal and cross axes as standard, to reduce downtime • Large-sized, hardened and precision-ground gears • The removable gap allows machining of large-diameter workpieces • Sliding tailstock for taper turning, handwheel with adjustable fine graduation (0.02 mm) • Electromechanical foot brake to minimize non-productive times • Excellent cutting performance in facing operations too Scope of delivery • Slip clutch • Rapid traverse longitudinal and cross • LED machine lamp • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 400 mm • Fixed steady rest – max. pass-through diameter 200 mm • Travelling steady rest – max. pass-through diameter 110 mm • 1 dead center / 1 revolving center • Motor with magnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Reducing sleeve • Chip guard • Service tools

Stanje: novo, Industrial Belt Grinder Scantool 150 x 2000 with integrated dual extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 HP Belt speed: 34 m/sec Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Surface grinding area: 530 mm Weight: 115 kg The Scantool industrial belt grinder models with dual extraction (75 x 2000 and 150 x 2000) are high-performance, quality machines built to the strictest environmental and safety standards. Ncodpfxsflt Ale Al Njr All belt grinders are equipped as standard with a motor brake, adjustable working height, eye protection, miter gauge, and motor protection switch with no-voltage release. The low-noise, CE-certified machine is ideal for grinding all types of metals. Motor protection switch with no-voltage release Separate emergency stop Motor brake Adjustable miter gauge Eye protection The steplessly adjustable working height enables an ergonomically correct working position Perfect design for fast, effective, and safe grinding Self-adjusting belt tension Top-quality Danish manufacture

Stanje: novo, Industrial Belt Grinder Scantool 75 x 2000 with Integrated Double Extraction Sanding belt: 75 x 2000 mm Working width: 75 mm Motor: 4.1 hp Speed: 34 m/sec Table height: 475 to 1240 mm Belt dimensions: 75 x 2000 mm Flat grinding area: 530 mm Weight: 100 kg Nedpoflt Amsfx Al Nscr The Scantool industrial belt grinder models with double extraction, 75 x 2000 and 150 x 2000 mm, are high-performance quality machines built according to the strictest environmental and safety standards. Standard equipment includes motor brake, adjustable working height, eye protection, angle stop, and a motor protection switch with no-volt release. The low-noise, CE-certified machine is ideal for grinding all types of metal. • Motor protection switch with no-volt release • Separate emergency stop • Motor brake • Adjustable angle stop • Eye protection • Infinitely adjustable working height enables ergonomic operation • Perfect design for fast, efficient and safe grinding • Self-adjusting belt tension • Danish premium quality

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 23.200 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2014, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 13.490 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.300 mm, skupna dolžina: 26.000 mm, skupna širina: 38.000 mm, skupna višina: 140.000 mm, vzmetenje: drugo, velikost pnevmatike: 425 / 65 R 22,5, barva: bela, Leto izdelave: 2014, velikost sprednje pnevmatike: 425 / 65 R 22,5, emisijski razred: noben, Oprema: dvižna zadnja plošča, Proizvajalec osi SAF, kolutna zavora ET0, tip Frischdienst, obratovalne ure 3.504 dizel / 3.721 elektrika, električni priključek, dviganje in spuščanje, nakladalna ploščad Bär 2.000 kg z 2.300 mm aluminijasto ploščo z zaklepanjem in zaščito pred premikanjem, termografi DataCold T 500, hladilni agregat Carrier Maxima 1300 d/e, orodjarna, antispray, ABS / EBS, klobučasti profili, aluminijasta tla, pritrdilna letev za tovor, 3x pritrdilni tramovi, 1x blokirni tram za LDS, tehnični pregled do 06/2026, SP do 12/2026, trodelna hladilna zavesa, 2. os prisilno vodena, bat pri LBW oljno vlažen, potreben pregled hladilnega agregata. Njdsytydzjpfx Al Nscr

Stanje: rabljeno, prevoženi kilometri: 767.300 km, moč: 309 kW (420,12 KM), prva registracija: 12/2011, vrsta goriva: dizel, velikost pnevmatike: 315/70 R 22.5, konfiguracija osi: 6x2, medosna razdalja: 4.050 mm, gorivo: dizel, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, skupna dolžina: 6.450 mm, skupna širina: 2.550 mm, Leto izdelave: 2011, Oprema: ABS, AdBlue, električno upravljanje oken, klimatska naprava, spojler, tempomat, = Dodatne opcije i oprema = - 6x2 - Aluminijumski rezervoar za gorivo - Krovni spojler - Digitalni tahograf - Podizna osovina - Vazdušno vešanje - Radio/CD plejer - Kabina za spavanje = Dodatne informacije = Nedpfxjyvh Sgj Al Nocr Tehničke informacije Broj cilindara: 6 Zapremina motora: 11.705 cc Konfiguracija osovina Dimenzije guma: 315/70 R 22.5 Prednja osovina: upravljiva; profil gume levo: 30%; profil gume desno: 30%; vešanje: lisnate opruge Zadnja osovina 1: upravljiva; profil gume levo: 40%; profil gume desno: 40%; vešanje: vazdušno vešanje Zadnja osovina 2: dvostruka montaža; profil gume levo unutra: 35%; profil gume levo spolja: 35%; profil gume desno unutra: 35%; profil gume desno spolja: 35%; redukcija: jednostavna redukcija; vešanje: vazdušno vešanje Težine Prazna masa: 8.350 kg Nosivost: 18.150 kg Dozvoljena ukupna masa: 26.500 kg Stanje Oštećenja: nema Identifikacija Registracija: BZ-LS-35

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut system NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control system Motorized backgauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Ncsdpfod Ab Hhjx Al Nsr Wide support table with ball transfers Foldable finger guard 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Qualified customer service Operating instructions in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Leto izdelave: 2024, Hole diameter: 20 mm Dimensions (LxWxH): 2480 x 1200 x 930-1003 mm Table width: 1200 mm Table length: 2250 mm Working height: 930 - 1003 mm Plate thickness: 12 mm Product Specifications – Welding Tables - Plate size: 2480 mm x 1200 mm - All-round reinforcement rim, 140 mm high, fitted with a double-row hole grid. - The hole grid is spaced 100 mm x 100 mm (center to center). - Equipped with the necessary reinforcing ribs across width and length. - Table material: S355, pickled and oiled. - The legs are fitted with ball joints and are height-adjustable. - The welding table is oiled and pickled, creating a smoother work surface and making the table less susceptible to weld spatter. Additional Options: Engraved guide lines: €85 Nsdpfx Aloukkrvj Necr Hole diameter 16 mm: €80 Hole diameter 28 mm: €80 Diagonal hole pattern 50x50 mm: €250 4 adjustable castors: €360 The welding tables with feet and rollers are height-adjustable. Working height from 92 to 93 cm. The legs can be adjusted up to 10 cm higher. A welding table with adjustable rollers has a minimum working height of 87 cm. The rollers can be set to a maximum working height of 100 cm.

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total power requirement: 18 kW Weight approx.: 9,200 kg Dimensions (LxWxH): 4,000 x 1,900 x 2,350 mm Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. KK kletzer CNC-guided guillotine shear Featuring robust, durable mechanical and hydraulic systems, a precise CNC backgauge with ball screw, and a user-friendly CNC controller, KK kletzer guillotine shears are highly efficient production machines. Our standard portfolio covers shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters. Higher sheet thicknesses and cutting lengths are available upon customer request. Their exceptionally sturdy, fully welded frame accounts for the long service life of our guillotine shears. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring maximum cutting quality. By entering the sheet thickness and material type, the CNC control automatically determines the required cutting angle and cutting gap. Our renowned brand KK kletzer CNC GUILLOTINE SHEAR, guided ram design Model 3213, offers everything required for perfect cutting operations. Technological advantages: - Fast and precise cuts - Stable, long-lasting frame structure - Automatic cutting gap and angle adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from leading manufacturers - Low unit costs Technical data: - Sheet thickness: 13 mm - Cutting length: 3,280 mm - Cutting angle: 0.3 – 2° - Backgauge: 1,000 mm via CNC - Motor power: 18 kW - Length: 4,000 mm - Width: 1,900 mm - Height: 2,350 mm Nodjfl S Efjpfx Al Necr - Weight: 9,200 kg Features: • Guided ram design • CNC controller ELGO P 40 T - Backgauge - Cutting angle - Cutting gap - Cutting length • Ball screw for backgauge positioning • Ball transfers in the table • Side gauge • 2 support arms • 1,000 mm flip-up finger guard We have numerous references!

Stanje: novo, Leto izdelave: 2025, Sheet thickness: 10 mm Sheet length: 3200 mm Combination Package: CNC Press Brake & Swing Beam Shear For precise, cost-effective, and safe sheet metal processing We offer you a high-performance, complete package consisting of a CNC press brake (160 t / 3200 mm) and a swing beam shear (10 mm / 3200 mm) – optimally matched for modern sheet metalworking with high precision and efficiency. CNC Press Brake – 160 tons / 3,200 mm With 4 CNC axes (Y1, Y2, X, R) & CNC crowning system Ncsdjwnz Apopfx Al Nsr Standard features: - Robust, torsion-resistant construction for precise bending and long service life - CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability - Motorized CNC crowning system for automatic bending angle correction - CNC control ZY 68 (comparable to Delem) – intuitive, powerful, and flexible - Backgauge with linear guides & ball screw, 4 gauging fingers - 2 sheet support arms for ergonomic operation - Laser safety device on the upper beam for high operator safety - Quick clamping system for top tools - Tooling system: Promecam Amada (segmented and gooseneck) - Die system compatible with Promecam & Amada - Complete CE safety equipment Swing Beam Shear SWC 3200 x 10 mm With NC control and motorized backgauge Technical data: - Sheet thickness: up to 10 mm, cutting length: 3,200 mm - Cutting angle: 1.30°, Motor power: 15 kW - Motorized backgauge: up to 1,000 mm - Dimensions: L 3,800 × W 1,820 × H 1,920 mm - Weight: 7,700 kg Features - Swing beam design for clean cuts - NC control ELGO P40 T with front-side operation (incl. blade gap adjustment) - Hydraulic hold-downs close to the cutting line - Clear control console on swing arm - Foot switch, blade gap adjustment & cutting line illumination - Wide support table with ball transfers, 2 sheet support arms with T-slot - Folding finger guard, 1 side gauge with T-slot - Upper blade double-edged / lower blade four-edged, reversible - Adjustable cutting length for time-saving operation - Qualified customer service, English operating manual - CE-compliant design Your advantage – Everything from a single source: - Perfectly coordinated machines - Time and cost savings with the combination offer - Ideal for workshops, metal fabricators & job shops Enquire now and secure a non-binding quotation!

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm Ncsdpfx Alod Ab Hms Nor - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing - Lower blade can be turned 4 times - Upper blade can be turned 2 times - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 290.196 km, moč: 302 kW (410,61 KM), prva registracija: 04/2016, velikost pnevmatike: 13R22.5, konfiguracija osi: 6x4, zavore: zaviranje z motorjem, barva: bela, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: jeklo, dolžina tovornega prostora: 6.810 mm, širina tovornega prostora: 2.500 mm, Leto izdelave: 2016, Oprema: ABS, AdBlue, airbag, centralno zaklepanje, električno upravljanje oken, klimatska naprava, meglenke, nadzor oprijema, spojka prikolice, tempomat, zapora diferenciala, žerjav, = Additional Options and Accessories = - Aluminium fuel tank - Leaf spring suspension - Power brake booster - Differential lock - PTO - Radio/CD player - Reversing camera - Sun visor = Remarks = Palfinger 20001 K Remote control Njdoylzgbopfx Al Nocr 4 outriggers 3 extensions Rotator Pallet hook available for an additional charge of €1,500 = Further Information = Axle configuration Tyre size: 13R22.5 Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 8,000 kg; Steered; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 1: Twin tyres; Differential lock; Max. axle load: 10,500 kg; Tyre tread inner left: 30%; Tyre tread outer left: 30%; Tyre tread inner right: 30%; Tyre tread outer right: 30% Rear axle 2: Twin tyres; Differential lock; Max. axle load: 10,500 kg; Tyre tread inner left: 60%; Tyre tread outer left: 60%; Tyre tread inner right: 60%; Tyre tread outer right: 60% Weights Unladen weight: 14,595 kg Payload: 8,405 kg Gross vehicle weight: 23,000 kg Functional Body brand: Palfinger PK 20001 K Condition Technical condition: very good Optical condition: very good For more information Please contact Bas Wolfs for further details.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2541925, vrsta goriva: dizel, proizvajalec motorjev: Kubota V2203M, Namen uporabe: Gradbeništvo Lastna masa: 1.020 kg Nsdpfxex N Duwj Al Nocr Moč generatorja: 20 kVA CE označba: da Emisijska stopnja: Stage V / Tier IV final Prostornina rezervoarja za vodo: 150 l Transportne dimenzije (D x Š x V): 2,04x1x1,406 Država proizvodnje: ES Za dodatne informacije kontaktirajte Kennyja Bongersa, Tijmena Pesselseja, Arjena van Dijka ali Ronalda van der Laara. = Druge možnosti in dodatna oprema = - Baterija - Krmilna plošča - Jeklena streha - Cisternsko vozilo