Hidravlični Razdelilni Blok nakup rabljenega (2.865)

Leto izdelave: 1975, stanje: dober (rabljeno), številka stroja/vozila: 12148, 2 hydraulic power units Upright oil tank with an immersed hydraulic pump and flange-mounted motor, as well as 2 each control blocks with connecting hoses Hydraulic pump: Maximum pressure: 55 bar Speed: 1500 rpm Bdodpfx Akjghba Norec Hydraulic oil capacity approx.: 100 l

Stanje: pripravljen za uporabo (rabljen), Hydraulic power unit, comprising an oil tank with a mounted drive motor and flange-mounted hydraulic pump, as well as two valve blocks positioned above. 1. Valve block manufacturer: WANDFLUH Hydraulik Max. pressure: 160 bar Flow rate: 20 l/min Bsdedz Dliepfx Akrodc 2. Valve block manufacturer: BOSCH Operating pressure: 319 bar Drive motor: 220/380 V, 1420 rpm, 2.2 kW Space requirement: 700 x 620 x 1050 mm Weight incl. hydraulic oil (approx. 90 l): 193 kg

Stanje: zelo dobro (rabljeno), Jaw width: 103 mm Jaw height: 37 mm Bjdefgx R Ujpfx Akredc Clamping range: 175 mm Required space: 600 x 180 x 150 mm Weight: 27 kg

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Punching capacity in sheet metal with 37 kg strength up to: 2 and 3 mm Bsdod D Ryfspfx Akrodc with various punching tools

Stanje: rabljeno, številka stroja/vozila: 01655, Jaw width: 125 mm Jaw height: 42 mm Clamping width: 175 mm Bededqgiyepfx Akrodc Overall height: 108 mm

Stanje: pripravljen za uporabo (rabljen), Jaw width: 100 mm Bdjdjd Hurfopfx Akrec Jaw height: 41 mm Clamping width: 160 mm Total height: 127 mm

Stanje: rabljeno, številka stroja/vozila: V-17 1782, Jaw width: 103 mm Jaw height: 37 mm Clamping range: 175 mm Swivel range: 90° Required space: 600 x 180 x 150 mm Bodjdp S U Nspfx Akrsdc

Stanje: rabljeno, Jaw width: 125 mm Jaw height: 40 mm Clamping range: 215 mm Bedpfjda Aibox Akrodc Overall height: 135 mm

Stanje: rabljeno, Jaw width: 125 mm Bdsdpfx Ajda Aipjkrec Jaw height: 47 mm Clamping range: 220 mm Overall height: 160 mm

Stanje: pripravljen za uporabo (rabljen), 1 brusilni disk, plemeniti korund: 200 Ø x 20 mm Hitrost vrtenja brusilnega diska: 2800 o/min Pogon motorja: 220 V, 0,9 kW Bedpfx Asyv Dukekrodc Potrebni prostor: 500 x 400 x 450 mm

Stanje: pripravljen za uporabo (rabljen), Dimenzije brusnega koluta: 175 x 25 mm Hitrost brusnega koluta: 3000 vrt/min Bdedpfx Aeyv Dr Askroc Električni priključek: 220 V, 250 W Potrebni prostor: 400 x 230 x 215 mm

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls Bdjdpfxjw Sld Rs Akrjc OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel Bdsdpfx Akow Smdforoc * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Bodpfexw D Udjx Akrjdc Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.000 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guideway H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long lifespan. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are designed with consideration for heavy industrial environments. The frame and main support structures are stress-relieved via vibration. The Bronze Zr14 slideway bearings provide uniform load distribution and high precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guideways - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - Welding applications approved by WPQR & WPS under TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 1000 - Type: Steel construction, H-frame press with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Moving Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding Application: WPQR and WPS approved, certified by TÜRK-AK per EN ISO 15614-1/2017 - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Pressing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø500 mm – Ck45 (2 units) - Auxiliary Fast Forward Cylinders: 2 units - Approximate Height: 6000 mm - Approximate Width: 3450 mm - Approximate Depth: 2400 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Ruler: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Bdodpfx Aox N T Rbokrjc

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.200 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP Series H-type hydraulic deep drawing presses are specially designed for deep drawing, flow forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame design, it delivers maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model provides reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved by vibration, ensuring balanced load distribution during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame with vibration technique - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guided H-frame press body Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1,200 tons Moving Table Dimensions: 1,500 × 2,000 mm Fixed Table Dimensions: 1,500 × 2,000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1,000 mm Min. Clearance: 100 mm Max. Clearance: 1,100 mm Stress Relief: Vibration stress relief Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 welding certification Max. Working Pressure: 250 bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,100 mm Approx. Press Width: 3,550 mm Approx. Press Depth: 2,400 mm Lower Table Height From Floor: 1,450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Bedpfx Ajx N T Ruokredc

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, hod: 1.000 mm, širina mize: 1.800 mm, dolžina mize: 2.600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, and metal spinning applications requiring very high tonnage. The 8-guided H-frame structure ensures maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2500 model, with its large table dimensions, multi-cylinder main pressing system, and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame body type - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified by TURK-AK with WPQR and WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame body type Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relieving Welding Certification: TURK-AK accredited, WPQR and WPS approved, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec. Movable Table Drawing Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Bore: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 6500 mm Approximate Press Width: 3950 mm Approximate Press Depth: 2600 mm Height of Lower Table from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Bdedpfx Akex N T S Eorsc Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) Bdsdpfx Ajw Slctskrec User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * The hydraulically opening head allows for easy removal of bent workpieces * Very easy operation with movable control panel * The position of the lower rolls can be easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends for mounting profile or pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special work * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16/20 mm Bending : 20/22 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Bsdow Slg Sepfx Akrodc Length : 4100 mm Width : 1500 mm Height : 1550 mm Weight : 7400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 30 mm, STANDARD EQUIPMENT * The top, bottom, and side rolls move up and down linearly via hydraulic cylinders attached to the machine frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent parts thanks to the hydraulically opening head and automatic lifting shaft * Highly user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Upper crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bsdpfow Sl T Ssx Akrjdc Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 5 kW (6,80 KM), STANDARDNA OPREMA Varjeno ohišje iz jeklene konstrukcije Trije valji z motornim pogonom Iz posebnega visoko odpornega materiala, kaljeni in brušeni valji Horizontalni in vertikalni delovni položaj Kaljeni standardni valjčni koluti Ločena premična upravljalna plošča Bdedpfsw Smibjx Akroc 3-smerne mehanske ročne stranske podpore Natančno upogibanje z motorjem z zavoro 2 digitalna prikazovalnika IZBIRNA OPREMA Valjčni koluti za krivljenje cevi in profilov Izbirne dvoosne hidravlične stranske podpore Avtomatizacija z NC krmiljenjem TEHNIČNE LASTNOSTI Premer zgornje gredi: 80 mm Premer spodnje gredi: 70 mm Premer valjčnega kolesa: 245 mm Delovna hitrost: 7 m/min Moč motorja: 4,75 kW Dolžina: 1500 mm Širina: 1000 mm Višina: 1400 mm Teža: 1645 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) Bjdpexbzptofx Akredc * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200 H-Frame Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibratory stress-relieved frame and load-bearing components - Bronze Zr14 slide bearings - WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Bdodpfex N T D Uex Akrsc - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7") - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration stress relief Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Bdedpfsw Slxzex Akrjc Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bodpfxsw Sl I Ne Akrodc Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Top & Bottom Roll : 460 mm Side Roll : 380 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg