Hesse By Beka-Mak Bmso 440 Cgh Nc nakup rabljenega (20.957)

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity Hsdpsynm Euofx Aqtet The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 38.000 € Leasing obrok 725,8 € Dolžina upogibanja 2050 mm Maks. zmogljivost upogibanja – konstrukcijsko jeklo 8 mm Maks. debelina pločevine brez predupogiba – konstrukcijsko jeklo 8 mm Maks. debelina pločevine s predupogibom – konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba pri D=5x zgornji valj 8 mm Maks. debelina pločevine brez predupogiba pri D=1,5x zgornji valj 6 mm Maks. debelina pločevine s predupogibom pri D=5x zgornji valj 6 mm Maks. debelina pločevine s predupogibom pri D=1,5x zgornji valj 4 mm Premer zgornjega valja 180 mm Premer spodnjega valja 180 mm Premer stranskega valja 150 mm Hitrost valjanja 5 m/min Dolžina 3850 mm Širina 1350 mm Višina 1290 mm Teža 3300 kg Motoriziran pogon valjev Hjdpfxoyb S Afj Aqtot Poganjana zgornji in spodnji valj Hidravlično nastavljanje stranskih valjev 3 digitalni prikazovalniki Hidravlična preklopna ležišča Kaljeni valji Naprava za konusno upogibanje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hsdpjynmylsfx Aqtot Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Turkey Price: €197,600 Leasing rate: €3,734.64 Pressing force: 400 tons Bending length: 6,050 mm Axes: 3 Stroke: 365 mm Distance between frames: 5,100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive system: hydraulic Rapid traverse Y-axis: 120 mm/s Working speed Y-axis: 8 mm/s Return speed Y-axis: 100 mm/s Backgauge stroke X-axis: 750 mm Backgauge speed X-axis: 350 mm/s Backgauge speed R-axis: 300 mm/s Backgauge stroke R-axis: 250 mm Table height: 1,220 mm Table width: 154 mm Oil tank: 500 l Motor power: 37 kW Length: 7,500 mm Width: 2,110 mm Height: 3,810 mm Weight: 34,660 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15" 2D graphic display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of blank length for sheet cutting - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software enables programming also on PC, with subsequent USB transfer to the machine Servo motor-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning system Top tool 1010/A/75°, segmented and goose-necked 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil fill included Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - More stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double rather than single linear guide - More available options, such as: additional backgauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls… Hjdpfjyui R Tox Aqtjt Price FCA Turkey Options (prices on request): R-Axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC Control Delem DA66 S DA-69S 3D incl. PC software Profile-S with 3D file import function Hydraulic tool clamping systems

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €102,300 Leasing rate: €1,933.47 Pressing force: 80 tons Bending length: 2,550 mm Axes: 4 Stroke: 320 mm Distance between uprights: 2,840 mm Installation height: 500 mm Drive concept: servo-motorized belt drive Rapid traverse Y-axis: 105 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 105 mm/s Back gauge travel X-axis: 650 mm Back gauge travel R-axis: 250 mm Length: 3,700 mm Width: 2,200 mm Height: 2,550 mm Weight: 6,400 kg Servo-motorized drive Power transmission via multi-guided flat belt 4 axes (Y1, Y2, X, R) Hodpfx Aoynndfsqtet CNC control DELEM DA-66S - 17" 2D graphics display - 3D visualization in simulation and production - Intuitive touch screen operation (easy drawing of bending contours with finger) - Simple and convenient data transfer - Multi-simulation capability - User-friendly dialog programming - Graphical simulation of bending process Servo-driven back gauge with linear guides and ball screws Back gauge finger blocks with double linear guides Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8/105, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground BLVT light barrier safety system Sheet support arms with linear guides Side and rear safety barriers Equipment in accordance with CE regulations Operating instructions in GERMAN or ENGLISH Advantages of this design: - No reduction of working width due to side frames, distance between uprights is larger than the bending length - Up to 30% higher productivity versus conventional hydraulic press brakes due to almost instantaneous pedal signal response - Minimal frame deflection - No crowning system required as bending force is applied over many points along bending length - High repeatability and bending accuracy throughout entire bending length - Low energy consumption - No hydraulic components Options: CNC control DELEM DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Cena: 97.800 € Leasing obrok: 1.848,42 € Pritisk: 160 t Dolžina mize: 1100 mm Širina mize: 700 mm Prebojna odprtina v mizi: 210 mm Hod: 23 - 110 mm Število hodov: 60 1/min Bat: 630 x 400 mm Vodila bata: 8 Nastavitev bata: 95 mm Luknja za čep v batu: 65 mm Izvleček: 325 mm Višina vgradnje: 480 mm Dolžina: 2400 mm Širina: 1430 mm Višina: 3200 mm Teža: 9950 kg 8-kratno vodenje bata Sprednja zaščita z varnostno svetlobno zaveso Motorska nastavitev bata Hjdpfsynnbwex Aqtot Hidravlična zaščita pred preobremenitvijo Samodejno mazanje Oprema po CE predpisih Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje novo Dobavni rok približno 3–6 tednov po naročilu Država izvora: Turčija Cena: 62.500 € Leasing mesečna rata: 1.181,25 € Tlačna moč: 63 t Dolžina mize: 750 mm Širina mize: 500 mm Prehodna odprtina v mizi: 170 mm Hod: 4–102 mm Število hodov: 54 1/min Bata velikost: 490x325 mm Nastavitev bata: 90 mm Izmet: 270 mm Čista razdalja okvirja: 440 mm Motor: 7,5 kW Dolžina: 1800 mm Širina: 1150 mm Višina: 2750 mm Teža: 4100 kg 8-kratno vodilo bata Sprednja zaščita s svetlobno zaveso Hodpfxoynna To Aqtst Ročna nastavitev hoda Nastavitev bata preko raglje Pogon preko menjalnika Elektropnevmatska kombinacija sklopke in zavore Fiksna delovna miza Enojni in trajni hod Pedal in dvoročna upravljanja Mehanska zaščita pred preobremenitvijo Samodejno centralno mazanje Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI (Simbilična slika)

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hodpjynm Ehjfx Aqtet Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €88,113 Leasing rate: €1,665.34 Pressing force: 220 t Bending length: 3,050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 2,600 mm Throat depth: 450 mm (side frame) Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 140 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 22 kW Length: 4,250 mm Width: 1,770 mm Height: 3,000 mm Weight: 12,600 kg Standard equipment: – 3 axes (Y1, Y2, X) – CNC control DT-15 - 2D graphic display 15” - Intuitive touch-screen operation (easy drawing of bending contour with finger) - User-friendly dialog-based programming - Automatic bending sequence calculation - Automatic calculation of developed length for sheet cutting - Graphic product and tool memory - Correction options - USB ports for backup and program transfer - PC software allowing programs to be written on PC and then transferred to the machine via USB – Servo-driven backgauge on linear guides and ballscrews – Backgauge finger blocks on double linear guides – CNC-controlled crowning – Upper tool 1010/A/75°, segmented and offset Hjdpfowiqudjx Aqtet – 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) – Laser safety device Fiessler AKAS mounted on upper beam – Sheet support arms on linear guides – Equipment according to CE directives – Oil filling – Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: – Greater stroke, installation height, and throat depth – Higher approach and return speeds of the upper beam – Increased backgauge speed – Backgauge fingers mounted on double, not single, linear guides – More available options, e.g., additional backgauge axes (such as Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls, etc. OPTIONS: – R-axis – R/Z1/Z2 axes – CNC control Delem DA66 S – CNC control DELEM DA-69S 3D incl. PC software Profile-S with import function for 3D files – Hydraulic or pneumatic tool clamping for Euro or Wila tooling

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Hedpfxjwird Ho Aqtet Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Hedpfxoyb Syko Aqtet Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support Hedpfx Asyb Sz Ieqtst NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Hedpfxjynm Ene Aqtjt Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Hedpsynmrujfx Aqtst Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €51,900 Leasing rate: €980.91 Shaft diameter: 120 mm Roller diameter: 390 mm Driven rollers: 3 Motor power: 15 kW Speed: 2 / 7.5 m/min Flat bar upright (cross-section / min. diameter): 125x25 mm / 1,200 mm; 30x Flat bar flat (cross-section / min. diameter): 200x50 mm / 1,000 mm; 100x Square bar (cross-section / min. diameter): 65x65 mm / 750 mm; 20x20 mm Round bar (cross-section / min. diameter): Ø 80 mm / 850 mm; Ø 20 mm Tube (cross-section / min. diameter): Ø 160x4 mm / 2,800 mm; Ø ... Rectangular tube upright (cross-section / min. diameter): 120x40x4 mm / 1,800 mm; 3x Square tube (cross-section / min. diameter): 90x90x5 mm / 1,800 mm; 30x Angle iron, leg outwards (cross-section / min. diameter): 120x120x12 mm / 1,200 mm; Angle iron, leg inwards (cross-section / min. diameter): 100x100x10 mm / 1,200 mm; UPN, leg outwards (cross-section / min. diameter): UPN 220 / 1,000 mm; UPN 1... UPN, leg inwards (cross-section / min. diameter): UPN 220 / 1,200 mm; UPN 1... IPN horizontal (cross-section / min. diameter): IPN 220 / 1,000 mm; IPN 8... Length: 2,000 mm Width: 1,650 mm Height: 1,900 mm Weight: 4,450 kg 3 driven rollers (hydraulic motor and planetary gearbox) Shafts made of hardened and ground special steel Hydraulic adjustment of both lower rollers Hardened universal rollers Side guide rolls hydraulically adjustable in 3 axes 2 speeds Usable horizontally and vertically Mobile control panel Digital display (3 axes) Machine and equipment according to CE standards Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov po oddaji naročila Država izvora: Turčija Cena: 14.800 € Mesečni obrok ob finančnem lizingu: 284,16 € Hedswirrkepfx Aqtet Teža tuljave: 2500 kg Maks. zunanji premer tuljave: 1300 mm Min. notranji premer tuljave: 450 mm Maks. notranji premer tuljave: 550 mm Maks. širina tuljave: 600 mm Min. širina tuljave pri različici s pnevmatsko pritiskalno roko: 80 mm Dolžina: 1600 mm Širina: 1550 mm Višina: 2000 mm Teža: 580 kg Motoriziran pogon Mehansko nastavljiv nosilec tuljave s 4 čeljustmi Regulacija hitrosti za hitrost odvijanja, kot tudi za pospeševanje in zaviranje Fotoelektrični senzor bližine SICK za nadzor prepogiba Pnevmatska pritiskalna roka ALTERNATIVNE MOŽNOSTI (cene po povpraševanju): Različica brez pnevmatske pritiskalne roke Različica brez pogona, z zavoro, z ali brez pnevmatske pritiskalne roke

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od oddaje naročila Država izvora: Turčija Cena: 104.800 € Mesečni obrok ob finančnem lizingu: 1.980,72 € Sila stiskanja: 150 ton Hod: 500 mm Bat: 950 x 650 mm Miza: 1200 x 750 mm Višina vgrajenega stroja: 750 mm Hitri hod: 100 mm/s Delovna hitrost: 5,5 mm/s Hitrost povratnega hoda: 165 mm/s Motor: 11 kW Dolžina: 2200 mm Širina: 2200 mm Višina: 3650 mm Teža: 9500 kg Delovni tlak: 254 bar Sila stiskanja vlečne blazine: 32 tone Hod vlečne blazine: 200 mm Premer luknje v mizi: Ø 120 mm Delovni tlak vlečne blazine: 160 bar Hitrost povratnega hoda vlečne blazine: 40 mm/s Površina vlečne blazine: 720 x 540 mm Senzorji Vlečna blazina Ročno in avtomatsko upravljanje Ročna nastavitev hoda s pomočjo gumbnega stikala Vzdrževalno brez, samopodmazujoča, štiridelna vodila bata Napetna plošča s T-utori Hjdpfx Aqewirl Rjtot Izvedba v skladu s predpisi "CE"

Stanje: novo, Leto izdelave: 2026, Condition: New Year of manufacture: 2026 Stock number: 090180 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €8,300 Leasing rate: €160.19 In stock: 1 Shaft diameter: 50 mm Top roller diameter: 152 mm Bottom roller diameter: 162 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 4.5 m/min Flat bar, upright (cross-section / min. diameter): 60x10 mm / 600 mm; 20x10 Flat bar, flat (cross-section / min. diameter): 100x15 mm / 600 mm; 50x Hsdpfjwiqm Tox Aqtst Square bar (cross-section / min. diameter): 35x35 mm / 600 mm; 15x15 Round bar (cross-section / min. diameter): 35 mm / 600 mm; Ø 20 mm Tube (cross-section / min. diameter): 70x2 mm / 1200 mm; Ø 25 Rectangular tube, upright (cross-section / min. diameter): 70x30x3 mm / 1500 mm; 30x Square tube (cross-section / min. diameter): 50x50x3 mm / 1600 mm; 20x Angle steel, legs outside (cross-section / min. diameter): 50x50x6 mm / 600 mm; 30x3 Angle steel, legs inside (cross-section / min. diameter): 50x50x6 mm / 900 mm; 30x3 Length: 810 mm Width: 950 mm Height: 1500 mm Weight: 500 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of top roller Hardened universal rollers Side guide rolls adjustable manually on one axis Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment in accordance with CE regulations Operating instructions in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: dober (rabljeno), Leto izdelave: 1998, nosilnost: 2.500 kg, dvižna višina: 4.400 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.100 mm, Yang FD-25 Triplo 440 Freelift / 3. funkcija Isuzu Diesel 1998 Video je mogoče poslati prek WhatsAppa. Neprekinjena zaloga, glejte spletno stran. Cene so iz Nulanda. Van de Wert Trading B.V. ima raznoliko zalogo strojev, tovornjakov, prikolic in dodatne opreme. Vse dobave so po trgovinskih cenah v stanju AS-IS, brez garancij (glejte naše splošne pogoje). Za ogled in/ali testno vožnjo lahko neobvezujoče rezervirate termin. Prosimo, pokličite vnaprej, saj nismo stalno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Hodpfezqyvqsx Aqtot

Stanje: novo, Leto izdelave: 2026, Stanje: novo Letnik izdelave: 2026 Številka zaloge: 090204 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Cena: 4.290 € Na zalogi: 1 Dolžina reza: 1250 mm Maks. debelina pločevine - konstrukcijsko jeklo: 1,5 mm Hjdpfjyz Dc Sox Aqtot Zadnji prislon: 500 mm Dolžina: 2250 mm Širina: 1000 mm Višina: 1150 mm Teža: 460 kg Varjena jeklena konstrukcija Z ročnim pritiskačem Zadnji prislon nastavljiv ročno preko ročnega kolesa Navodila za uporabo v ANGLEŠČINI

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov po oddaji naročila Država izvora: Turčija Cena: 80.100 € Mesečni obrok ob finančnem lizingu: 1.513,89 € Sila stiskanja: 60 ton Hod: 350 mm Bat: 550–850 mm Miza: 600–1000 mm Vgradna višina: 600 mm Hitrost hitrega premika: 100 mm/s Delovna hitrost: 10 mm/s Hitrost povratnega premika: 165 mm/s Motor: 11 kW Dolžina: 1950 mm Širina: 1900 mm Višina: 2850 mm Teža: 5350 kg Delovni tlak: 170 bar Sila stiskanja pri vlečnem stroju: 24 tone Hod pri vlečnem stroju: 150 mm Hedpfxewiqz Re Aqtot Premer luknje v mizi: 100 mm Delovni tlak pri vlečnem stroju: 156 bar Hitrost povratnega premika pri vlečnem stroju: 65 mm/s Površina vlečnega stroja: 470–650 mm Svetlobne pregrade Vlečni stroj Ročno in avtomatsko upravljanje Ročno nastavljanje hoda s kamnim stikalom Vzdrževalno nezahtevni, samopodmazani 4-delni vodniki bata Napetna plošča z utori v obliki črke T Izvedba v skladu z direktivami „CE“

Stanje: novo, Condition: New Delivery time: approx. 4-6 months from order Country of origin: Turkey Price: €231,900 Pressing force: 400 tons Bending length: 6050 mm Axes: Y1 / Y2 / X and R axes Stroke: 365 mm Distance between uprights: 5100 mm Throat depth (side frame): 510 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 150 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 150 mm/s Backgauge travel X-axis: 750 mm Oil tank: 160 l Length: 7500 mm Width: 2110 mm Height: 3810 mm Weight: 34,600 kg ONE SERVOMOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (simple drawing of the bending contour with your finger) - User-friendly programming via dialog, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool memory - Correction options - USB ports and Ethernet connection for import, backup, and program outsourcing - Operating system: Windows - Import support for IGES, STEP, DXF files Servo motor-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and goosenecked 4-way die block 60x60 2009 (V= 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed Hodpfewir Avex Aqtot PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €144,300 Leasing rate: €2,727.27 Press force: 320 t Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 2,600 mm Throat depth: 410 mm (side frame) Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2 x 11 kW Length: 4,300 mm Width: 1,820 mm Height: 3,330 mm Weight: 16,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22: - Full HD graphic display 21.5” with 2D and 3D visualization of programmed part - Intuitive touchscreen operation (easy drawing of bending contour with finger) - Operator-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bend sequence calculation - Graphical product and tool storage - Correction function - USB ports and Ethernet connection for import, backup, and program transfer - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning system Top tool 1010/A/75°, segmented and gooseneck 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Hjdpfx Aewiqphjqtjt Fiessler AKASam laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE standards Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emission - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamping levers for the upper tool

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €188,488 Leasing rate: €3,562.42 Laser power: 3 kW Manual table / shuttle table: Shuttle table Max. sheet thickness – mild steel: 16 mm Max. sheet thickness – stainless steel: 8 mm Max. sheet thickness – aluminium: 8 mm Max. sheet thickness – copper: 5 mm Max. sheet thickness – brass: 8 mm Total connected load: 26.4 kW (with extraction) Cutting area: 3,100 x 1,525 mm X-axis: 3,100 mm Y-axis: 1,525 mm Z-axis: 125 mm Max. sheet size: 3,084 x 1,524 mm Max. sheet weight: 240 kg (for 3–12 kW) / 400 kg/m² Max. total weight for double table: 2,200 kg (for 3–12 kW) / 360 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table changeover time: 25 s The HD-FN features two tables that are automatically exchanged in alternation, allowing for simultaneous cutting and loading/unloading operations. The shuttle table is positioned longitudinally, providing optimum accessibility for optional loading and unloading systems. Hedjx U Elbjpfx Aqtjt Control, laser source, and cooling system are integrated into the unit. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinally positioned for best accessibility for optional loading/unloading systems) - Enclosed cutting area with protective glass - CNC graphic control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated cooling unit for cutting head and laser source - Lantek CAD/CAM software for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap bin - Work area lighting - Multi-chamber extraction system - Light barrier protection for the shuttle table - Remote maintenance access - Control cabinet air conditioning - Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material | 4 kW | 6 kW | 12 kW | 15 kW | 20 kW -----|-----|-----|-----|-----|----- Mild steel S235 | 20 | 25 | 30 | 35 | 40 Stainless steel (304) | 10 | 15 | 25 | 35 | 40 Aluminium (5083) | 12 | 20 | 30 | 35 | 40 Copper | 6 | 10 | 15 | 15 | 15 Brass (CuZn39 Pb3) | 10 | 12 | 20 | 20 | 20 OPTIONS: - Extraction with filter unit - Sheet handling systems - Automatic nozzle changer

Stanje: novo, Stanje: novo Dobavni rok: cca. 3–6 tednov od naročila Država izvora: Turčija Hsdsynnbqepfx Aqtst Cena: 79.900 € Leasing obrok: 1.510,11 € Tlačna sila: 130 t Dolžina mize: 1000 mm Širina mize: 640 mm Prehodna odprtina v mizi: 210 mm Hod: 5 - 110 mm Število hodov: 60 1/min Bat: 630x400 mm Nastavitev bata: 90 mm Izsev: 330 mm Motor: 11 kW Dolžina: 2200 mm Širina: 1372 mm Višina: 3000 mm Teža: 8200 kg 8-kratno vodilo bata Sprednja zaščita z varovalno svetlobno zaveso Ročna nastavitev bata Mehanska zaščita pred preobremenitvijo Samodejno mazanje Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €163,101 Leasing rate: €3,082.61 Working area: 2000 x 6000 mm Plasma power source: Hypertherm XPR 170 CORE Max. sheet thickness (mild steel): 60 mm Max. sheet thickness (stainless steel): 38 mm Max. sheet thickness (aluminium): 38 mm Hsdpewiq Hasfx Aqtet Max. pierce thickness (mild steel): 35 mm Max. pierce thickness (stainless steel): 22 mm Max. pierce thickness (aluminium): 25 mm Current: 170 A Max. cutting speed: 12 m/min Positioning speed: 35 m/min Positioning accuracy: +/- 0.1 mm Repeatability: 0.1 mm Weight: 6,000 kg HyPerformance plasma source Hypertherm XPR 170 CORE with True Hole technology Automatic gas console Plasma torch height control Laser for zero point determination Collision protection (torch breakaway system) CNC control with AURORA plasma cutting software Lantek CAD/CAM software incl. nesting Filter unit control via CNC Remote diagnostics via network Sheet alignment function Operating manual in GERMAN and ENGLISH Options: - Extraction unit with filter - Additional charge for Optimix instead of Core Further options such as 3D cutting head, drilling head, tube cutting device, oxy-fuel torch, Durma Cloud etc. available on request.