Galdabini Tisk Z Dvema Stolpcema nakup rabljenega (49.661)

Stanje: rabljeno, Leto izdelave: 2004, Druck 80 t Hub 16 - 63 mm Hubzahl 100 - 750 /min Ständerweite 970 mm Einbauhöhe (Hub + Stösselverstellung oben) 380 mm seitlicher Ständerdurchgang 380 mm Tischfläche 940 x 910 mm Durchfallöffnung im Tisch 770 x 190 mm Bdodpevuua Nsfx Agtsb Tischhöhe über Flur 1180 mm Stößelfläche 940 x 510 mm Stößelverstellung 76 mm Materialbreite 203 mm Materialstärke - 6,0 mm Vorschublänge 0 - 120 mm Antriebsleistung 37,0 kW Gewicht 14,50 t Raumbedarf ca. 2,7 x 1,7 x 3,6 m Für Automatikbetrieb zugelassen gemäß CE-Norm mit stufenlos regelbarem Drehstromantrieb, pneumatischer Kupplungs-/Bremskombination, halbautomatischer Hubverstellung, automatischer Stößelverstellung, festem Tisch, Öl-Umlaufschmierung mechanischem Walzenvorschub Bruderer BBV 205/120 mit Antrieb über Hauptwelle/Gelenkwelle der Presse Kragconsolen Guethle CK Optional kann eine Schallschutzkabine angeboten werden - Preis auf Anfrage

Stanje: rabljeno, Leto izdelave: 1998, Tlak 160 t Hod 30 - 90 mm Število hodov 50 - 300 /min Širina stojala 1270 mm Vgradna višina (hod + nastavitev batnice zgoraj) 590 mm Stranski prehod stojala 440 mm Površina mize 1250 x 900 mm Prebočna odprtina v mizi 950 x 300 mm Površina batnice 1250 x 800 mm Nastavitev batnice 100 mm Širina materiala 200 mm Debelina materiala - 6,0 mm Bdsdpfjvut Uxex Agteb Dovodna dolžina 0 - 120 mm Pogon 64,5 kW Teža 21,00 t Prostorska zahteva pribl. 3,0 x 2,2 x 3,9 m Odobreno za avtomatsko delovanje po CE-normah z brezstopenjsko nastavljivim enosmernim pogonom, hidravličnim sklopko/zavorno kombinacijo (Desch), avtomatsko nastavitvijo hoda, motornim nastavljanjem batnice, fiksno mizo, krožnim oljnim mazanjem mehaničnim valjčnim podajalnikom Bruderer BBV 205/120 s pogonom preko glavne/gibalne osi stiskalnice konzola Guethle CK 01/0800

Stanje: rabljeno, Laser Sintering System Vanguard si2 SLS system upgraded in 2017 to modern standards Machine dimensions: Width: approx. 157 cm Depth: approx. 119 cm Height: approx. 198 cm Minimum installation area: 4.57 m × 3.66 m × 3.05 m Door height: 2.13 – 2.44 m Floor requirements: Level (maximum deviation 25 mm) 50 psf load bearing capacity Non-vibrating Non-tiled / non-carpeted Approx. 1,150 kg Process station: 240 VAC ±5 % 3-phase 12.5 kVA Dedicated circuit Bdjdpfx Ageyl Tv Ioteb 4-wire cable Ceiling connection If other voltage required: Transformer necessary: 208→240 V 400→240 V 480→240 V Upgrade details: UniHeat V5 / 10-zone build chamber heating Layer structure software-adjustable All listed materials parameterized to 0.10 mm 70 watt CO2 laser Fully digital 3-axis high-speed scan system with 'XStream BDS' scanner control system with scan speeds of 6–12 m/s Build progress at medium packing density: 10–15 mm/h 2 x 20 kg powder reservoirs within the machine Including unpacking container and manual unpacking station (see images in attachment) Including machine and software documentation in digital format Last maintenance August 2024 (Laser window + ATC sensor replaced in 2024) Includes 2 x nitrogen generators and 1 x cooler included Operating hours: unknown / average use 2x weekly The following materials are qualified for a layer thickness of 0.10 mm: - PA12 - PA2200 / EOS - TPU - natural / Stratasys - PP - natural / Lehmann & Voss - PA12 - PA2210FR / EOS - PA11 - black / AM Polymers (Support is ensured despite the discontinuation of LSS, as the service technicians have been taken over by a Belgian company) Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, all information without obligation!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Proizvajalec: ROVETTA Model: SC2-630 Leto: 1995 Stanje: Rabljeno Zaloga št.: 0393 Tlačna sila: 630 t Število točk tlačenja: 2 Hod drsnika: 152 mm Nastavitev drsnika: 203 mm Bodpfx Agjyv I N Sotsdb Dimenzije mize: 1.830 x 1.220 mm Dimenzije drsnika: 1.830 x 1.220 mm Uporabna prednja odprtina: 1.880 mm Število hodov/min: 25-60 Glavna moč motorja: 58 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, vhodni tok: 81 A, vhodna frekvenca: 60 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 1.830 mm, skupna širina: 1.618 mm, skupna višina: 2.400 mm, skupna masa: 5.000 kg, obratovalna temperatura: 140 °C, premer cilindra: 65 mm, širina odpiranja: 100 mm, Shelf press for veneer, plywood, MDF boards, chipboards, solid wood, etc. Manufacturer: JOOS Model: HPS 20 Year of manufacture: 2021 Total pressing force: 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure: 150 bar Pressure: 2.0 daN/cm² 5 heating plates, each 1000 mm x 1000 mm Working temperature: 0℃ - 140℃ Bjdpet Eq E Sofx Agtodb Stepless temperature control. Timer for setting operational time; after the set time elapses, the press opens automatically. Heating power – 5 x 12 kW Total power – 64 kW (81A, 60Hz) Weight: 5000 kg Brand new press – never used Complete technical documentation included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, številka stroja/vozila: 5058870, Pressing force: 25 t Throat depth: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Bedem Uxzujpfx Agtodb Stroke adjustment: 4 - 80 mm Strokes per minute: 150 /min Drive motor: 380 V, 1.1 kW Space requirements: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a press force of 200 T and an extendable sliding table system. The machine is equipped with heating plates measuring 800 × 800 mm, an open height of 800 mm, and a hydraulic stroke of 600 mm, making it particularly suitable for laminating, forming, and thermal pressing applications with temperature-controlled tools. ==== Technical Data + Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Press force: 200 T - Usable table area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table travel: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: Welded steel construction ==== Hydraulic Cylinder - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. working pressure: 260 bar ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Flow rate: 42 l - Motor power: 7.5 kW - Power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure holding up to 60 minutes ==== Heating System - Electrically heated steel plates - Heating power: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate - Temperature fluctuation: approx. 5–10 °C ==== Control System - Two-hand operation - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment by rotary valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC Bdjdpfx Agjyuvrdetsb - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastic processing, laminating applications, composite materials, rubber and elastomer processing, compression molding, thermal pressing, hot pressing processes Hydraulic press, hydraulic heated press, heated press, sliding table press, 200-ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. For the hydraulic components, we primarily use parts from leading European manufacturers.

Stanje: rabljeno, Single-column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, ram at TDC, largest stroke: max. 469 mm Installation height, ram at BDC, largest stroke: max. 387 mm Strokes: 50–200 strokes/min Main drive motor power: 18.5 kW Power supply: 400 Volts, 50 Hz - Hydraulically operated multi-disc wet clutch and spring-actuated safety brake - Infinitely variable drive via PIV gearbox with crawl speed for automatic stroke adjustment and setup operations - Hydraulic overload protection in ram - Press force and process monitoring via UNIDOR APS - Pneumatic, infinitely adjustable ram counterbalance - Roller feed MABU WE16, 160 x 3 mm, feed length programmable - Centralized grease lubrication - Operating manual and press documentation Includes: Roller Feed Device MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feed control MABU Bdjdpex U Eiasfx Agtob Space requirements eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Océ Arizona 2280 XT je 8-kanalni UV flatbed tiskalnik z Océ VariaDot tehnologijo sivinskih odtenkov, z največjim tiskalnim območjem 1,25 x 2,50 m (49,2'' x 98,4'') na togih materialih, največjo debelino materiala 50,8 mm (2'') ter hitrostjo do 64 m²/h (691 ft²/h) v ekspresnem načinu. Omogoča tisk na fleksibilne medije preko opcijske Roll Media Option (RMO), podpira belo barvo in lak ter omogoča tisk besedila velikosti 2 točki v načinu High Definition. Cena vključuje demontažo in nakladanje na tovornjak v originalnih škatlah (embalažo je potrebno vrniti). Pretek tiskanja: 60.000 m² Leto izdelave: 2016 Roll-to-roll opcija vključena Barvna konfiguracija: CMYK Lc Lm 2W (možna pretvorba enega kanala v lak) Lokacija: Zahodna Evropa RIP Onyx vključen Stroj je v produkciji, možen ogled in predstavitev Glavne tehnične specifikacije: Model: Océ Arizona 2280 XT Sistem črnil: 8-kanalni piezo-inkjet sistem z VariaDot sivinsko tehnologijo Tehnologija črnil: Izmet kapljic velikosti 6 do 42 pikolitrov, dve tiskalni glavi na barvo Načini tiskanja: Near-photographic, High Definition, Production in Quality načini Format trdega medija: 1,25 x 2,50 m (49,2'' x 98,4'') Največja debelina materiala: 50,8 mm (2'') Opcijska Roll Media Option (RMO): Na voljo za tisk na fleksibilne materiale Hitrost tiskanja (ekspresni način): do 64 m²/h (691 ft²/h) Možnosti črnil: CMYK, svetlo cian, svetlo magenta, belo UV črnilo in prozoren lak Kakovost tiska besedila: Bsdpfx Aeyly Idegtjdb Berljivo besedilo velikosti 2 pt v načinu High Definition Tehnologija upodabljanja: Océ VariaDot sivinska tehnologija z variabilno velikostjo kapljic črnila Za dodatne tehnične podatke prosimo, glejte priloženo brošuro.

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Bdedoyupulspfx Agtjb Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Proizvajalec: ROVETTA Model: S4-800 Leto: 2001 Bdjdpfxeyq Tdps Agteb Stanje: Rabljeno Številka zaloge: 0392 Proizvajalec: Rovetta Sila drsnega bloka: 800 ton Število potisnih točk: 4 Hod drsnega bloka: 700 mm Nastavitev drsnega bloka: 350 mm Število udarcev/min: 10-24 Višina orodja pri spodnjem gibu in zgornjem položaju drsnika: 1.100 mm Uporabna razdalja med sprednjima stebroma: 4.200 mm Dimenzija mize za orodje: 4.000 x 2.000 mm Dimenzija drsnika: 4.000 x 2.000 mm Višina premične mize: 600 mm Dimenzija stranskega okna: 3.400 x 1.900 mm Število blazin: 1 Sila hidravlične blazine (skupaj): 150 ton Hod spodnje hidravlične blazine: 250 mm Delovno območje spodnje hidravlične blazine: 1.500 x 1.000 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Proizvajalec: ROVETTA Bdjdpfjyq Tdiox Agtjb Model: S4-1500 Link Drive Leto: 2001 Stanje: Rabljeno Inventarna številka: 0391 Izdelovalec: Rovetta Število batov: 4 Sila drsnika: 1500 ton Hod drsnika: 763 mm Nastavitev drsnika: 400 mm Svetla višina spodnji hod/zgornja nastavitev: 1.200 mm Razdalja med sprednjimi stebri: 5.700 mm Dimenzija mize za orodja: 5.500 x 2.500 mm Dimenzija drsnika: 5.500 x 2.500 mm Višina premične mize: 600 mm Dimenzija stranskega okna: 3.400 x 1.900 mm Moč glavnega motorja: 319 kW Sila spodnjega pritisnega blazinica: 150 ton Hod spodnjega pritisnega blazinica: 250 mm Delovno območje spodnjega pritisnega blazinica: 2.000 x 1.200 mm Število udarcev/min: 8-24

Stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma obnovljena in prenovljena stiskalnica Oevermann. Tlačna moč: 150t, izstop: 400mm, hod: 400mm, vgradna višina: 600mm, dimenzije mize X/Y: 1200mm/710mm, pogonska moč: 37kW, teža: ca. 9500kg. Prenovljena in obnovljena so bila naslednja področja: hidravlika, sestavni deli, rezervoar, cevne napeljave in varnostne naprave. Krmiljenje je povsem novo nameščeno. Na voljo je dokumentacija. Možen je ogled na lokaciji. Bjdpeyxgr Rofx Agtodb

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 63 t Bdjdpsvut Ixsfx Agtjb Stroke: 10 – 80 mm Strokes per minute: 75 – 400 /min Upright clearance: 1080 / 920 mm Shut height (stroke + ram adjustment top): 450 mm Lateral frame passage: 300 mm Table area: 1000 x 550 mm Through-hole in table: 700 x 160 mm Table height above floor: 1080 mm Ram area: 900 x 450 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 – 3.0 mm Material cross-section: 750 mm² Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Space requirements: approx. 2.8 x 2.7 x 3.1 m (L x W x H) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (Ortlinghaus brand), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram counterbalance Servo roll feeder: Kaiser KWV 250

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 250 t, širina mize: 1.200 mm, dolžina mize: 2.000 mm, skupna masa: 55.000 kg, Certificirano po DGUV do: 09/2026, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 40.200 mm, Raster avtomatski stiskalni in oblikovalni stroj RSU 2500 - 2000 P Desch kompaktni pogon Bjdpfx Aoxcbbrsgtedb Elektronski sistem za merjenje sile stiskanja Hidravlični sistem za zaščito pred preobremenitvijo Trodelen odlit okvir z napenjalnimi drogovi Nosilec orodja Miza in vpenjalo bata Raster VWA hidravlični valjčni podajalnik, širina traku 500 mm, z Topochrom valjčno prevleko Površina bata 1000 x 2000 mm Število hodov 20 - 150 1/min Nastavljiv hod 40 - 200 mm Raziol segmentni valjčni oljilec Po želji z Kohler trakasto linijo 20030.400/9-2000.2H

Stanje: rabljeno, Presse excentrique à colonne unique WEINGARTEN type EV 63 Numéro de machine 738 / 61 Année de fabrication : 1962 Force de pression : 63 tonnes Profondeur du col de cygne : 260 mm Surface de la table : 630 x 530 mm Ouverture de la table : Ø 210 mm Surface du coulisseau : 315 x 260 mm Course du coulisseau, réglable : 8–100 mm Réglage du coulisseau : 63 mm Alésage pour épaulement d’outil : Ø 40 mm, avec pièce de serrage Hauteur d’installation : max. 450 mm Nombre de courses : 115 coups/min Besoins en air comprimé : min. 4,5 bar Puissance du moteur : 4 kW Connexion électrique : 380 Volt, 50 Hz Hauteur de table au-dessus du sol : env. 750 à 900 mm - Déclenchement électrique du coup par pédale ou commande bimanuelle - Sécurité contre les surcharges par plaque de rupture - Combinaison embrayage-frein par embrayage à friction fileté WEINGARTEN avec sécurité de passage PMH - Palier de support de vilebrequin avant - Table de presse réglable en hauteur via 2 broches filetées - Graissage centralisé manuel - Armoire électrique séparée - Sécurité UVV pour opérations manuelles Encombrement (L x l x h) : 1750 x 1600 x 2430 mm Poids : 4,5 tonnes Bdjdpfx Agsk S Htxstsb Bon état

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: GIGANT Model: G2-1200/2 Leto: 1993 Bdsdpex R U Idofx Agtjb Stanje: Rabljeno Inventarna številka: 0375 Tlačna sila: 1200 ton Število točk potiska: 2 Velikost delovne površine za orodja: 3.700 x 2.700 mm Velikost drsnika: 3.700 x 2.700 mm Hod drsnika: 1.000 mm Največja vertikalna odprtina: 1.590 mm Odpiranje orodja pri PMI: 610 mm Spodnji hod pritiskača pločevine: 400 mm Premični voziček: Prednji, prisoten

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina mize: 730 mm, dolžina mize: 810 mm, MODEL ROVETTA FO-200 Nazivna zmogljivost: 200 ton Fiksni hod: 200 mm Mize: 730 x 810 mm Svetla razdalja med stojali: 760 mm Udari na minuto: 65 Vertikalna odprtina med mizami: 450 mm Bdedsya Hidjpfx Agtjb Delovna višina: 800 mm Regulacija vretena (drsnik): 100 mm Glavni motor: 11 kW Hod pnevmatske blazine: 100 mm Sila pnevmatske blazine: 25 ton

Leto izdelave: 2025, stanje: zelo dobro (rabljeno), Nous proposons une extrudeuse monovis neuve en stock. L'installation n'a servi qu'à des fins de test et se trouve donc dans un état excellent, proche du neuf. Idéale pour les laboratoires, le développement de matériaux, les petites séries ou les applications d'extrusion sur mesure. --- Caractéristiques techniques & équipements • Diamètre de la vis : 30 mm • Rapport L/D : 25:1 • État : neuve / uniquement essais • Entraînement : moteur SEW 4 kW avec réducteur • Zones de chauffe : 4 zones avec régulateurs de température • Armoire électrique : comprise dans la livraison Bdsdpfx Agexxim Istob • Filière : filière à brins modifiable ou réalisable sur demande • Conception : construction robuste pour laboratoire / installation pilote • Mobilité : châssis roulant avec roulettes renforcées – facile à déplacer --- Points forts • Conception très compacte • Idéale pour filaments, profils, essais en laboratoire et tests de matériaux • Fût et vis en excellent état (voir photos) • Disponible immédiatement en stock

Leto izdelave: 1985, stanje: pripravljen za uporabo (rabljen), Tlačna sila: 100t, število hodov: 60/min, hod bata: 8mm-137mm, nastavitev bata: 80mm, izsev: 375mm, dimenzije mize X/Y/Z: 800mm/630mm, dimenzije stroja X/Y/Z: cca 1500mm/2400mm/3500mm, teža: cca 8800kg. Ogled na lokaciji je možen. Bedpfx Agoyu T Dqjtjdb

Leto izdelave: 1998, obratovalne ure: 297 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 200 mm, največja hitrost vrtenja: 3.000 obr/min, premer vijaka: 35 mm, številka stroja/vozila: E0195/10, Pas de prix de réserve – vente garantie au plus offrant ! Extrudeuse monovis avec seulement 297 heures de fonctionnement, y compris scie de tronçonnage et unité de tirage ! Hussmann ES35 x 30D DÉTAILS TECHNIQUES Diamètre de la vis : 35 mm Longueur : 30D DÉTAILS DE LA MACHINE Puissance moteur : 16 kW Heures de fonctionnement : 297 h Scie de tronçonnage DÉTAILS TECHNIQUES Vitesse moteur triphasé : 3 000 tr/min Puissance moteur triphasé : 0,55 kW Diamètre lame : 200 mm Unité de tirage DÉTAILS TECHNIQUES Vitesse de tirage : 20/30/40/50/60 m/min Force de tirage : 11 700 / 7 800 / 5 800 / 4 700 / 3 900 N Longueur de contact : 800 mm Largeur bande max. : 160 mm Bodpfeyrmzqsx Agtjdb Hauteur profil max. : 160 mm DÉTAILS DE LA MACHINE Puissance d'entraînement : 2 - 5,6 kW Poids : 800 kg ÉQUIPEMENT Commande électrique et électronique complète avec pupitre de commande à distance Affichage digital de la vitesse Ampèremètre Potentiomètre hélicoïdal 10 positions

Stanje: dober (rabljeno), Leto izdelave: 2003, Automatic Hydraulic Gluing Press Kallesoe Type LV 7821 This press is used for gluing wooden elements, such as panels, with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by warm water supplied to the press bed, which is kept in continuous circulation (it can be supplied from central heating or heated by built-in electric heaters on the press). Press heating power: 72 kW Bjdpjrqzgkefx Agtsdb Maximum press output: up to 2000 m² / 7.5 hours Glue applicator with feed system for Kallesoe Press Type KL40 – designed for automatic glue application to each lamella and direct transfer to the LV7821 press.

Stanje: rabljeno, Double-column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Drawing Press Machine no. 3973 Year of manufacture: 1983 Pressing force: 125 tons Column spacing: 1,050 mm Lateral column opening: 550 mm Table surface: 1,000 x 800 mm Bsdpfx Aoguvtlsgtodb Ram surface: 1,000 x 800 mm Ram stroke: 350 mm Max. installation height: 750 mm Table height above floor: 960 mm Blank holder force: approx. 12 tons at 105 bar Blank holder stroke: 100 mm Table opening diameter: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1,000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Hydraulic blank holder under the table with bore through the table plate Ø 202 mm - Precise 4-column guidance system on ram corners - Infinitely variable pressing force adjustment - Adjustable fixed stop, electrically controlled via hydraulic motor - Cutting stroke damping - Two-hand control panel for ram stroke activation on the press - Free-standing control cabinet (1,600 x 500 mm) - Documentation available, including operating manual, electrical diagrams, and PLC program printout Space requirement (L x W x H): 2,600 x 2,400 x 4,270 mm Weight: approx. 14 tons In good condition

Stanje: rabljeno, Double-column Hydraulic Press SCHÖN Model SH 25 Machine No. 4453 Year of manufacture: 1999 Pressing force: 25 tons Column gap: 500 mm Lateral column opening: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz - Safety light curtain SICK, type FGS 300-11 - Two-hand operation Bodpfow A Amrjx Agtjdb - Stroke counter - Rapid traverse and working stroke - Stroke limiter, pressure- or path-dependent - Mechanically adjustable fixed stop - Press force regulation - Pressing time extension 1-10 s (pressure holding time) - Adjustable return stroke speed - Prepared for electric blow-off device (without air valve) - Hydraulic tool safety, manually adjustable via handwheel Required space (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Stanje: rabljeno, Single-column hydraulic press DUNKES Type HZT 2.5 Machine no.: H94-2558 Year of manufacture: 1994 Pressing force: 2.5 tons Throat depth: 180 mm Table size: 420 x 300 mm Table opening: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Maximum installation height: 250 mm Rapid downstroke: 65 mm/sec Rapid upstroke: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Bdsdoh Uhqyopfx Agtsb Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Power connection: 400 V, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and travel cut-off - Two-hand operation at the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual loading operations) - 32,047 logged operating hours - Electrical and hydraulic circuit diagrams included Required space (L x W x H): 1100 x 980 x 1950 mm Weight: 700 kg Very good condition