Europaeischer Markenhersteller Konzolni Regal, Enostranski, Višina 3 M, 1,20 M nakup rabljenega (103.952)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Nwjdpfomhhyaox Agxjf - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. Nwjdpfxjh Ek Dae Agxef We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Nodsd Tqalopfx Agxjwf Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. Nwjdpfx Agemhhf Soxjf When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Nwjdpfemhhl Hjx Agxjf Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) Nodpfx Agsmidyfexswf - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support Nwjdpfxsmkixwo Agxef - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg Njdsqt Dmyepfx Agxswf - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, z indikatorjem obremenitve osi, dolžina nakladalne površine 8.200 mm, nakladalna višina obremenjena pribl. 900 mm, 20 pritrdilnih ušes po 10 t, 14 žepov za kole v zunanjem okvirju, nakladalne rampe (pribl. 3.000 x 750 mm), plezalna letvica na zunanji strani pri rampi in zadnjem nagibu, rampe nastavljive po širini, vzmetni dvižnik za enodelne rampe, lesen pod debeline 70 mm, zabo za shranjevanje z verižnim ali napenjalnim trakom, označevalni trak v skladu s predpisi, parkirna zavora z vzmetnim akumulatorjem, vozilo popolnoma vroče pocinkano, vključno z indikatorji obremenitve osi; dodatki za doplačilo: opozorilne table + osvetlitev + rotacijska luč = cena: 800 €, razširitev na 3 m = cena: 1.100 €, hidravlične enodelne rampe 500 €, hidravlični pomik ramp? = cena: 1.000 €, izrez za izkopno roko = cena: 1.000 €. Na zalogi tudi z dolžino nakladalne površine 9,20 m. -- Pridržujemo si pravico do napak in sprememb, vzorčne slike -- Več podatkov na:!, More Details: ! Nodpfx Ajy Dkb Hegxjwf

Stanje: rabljeno, prevoženi kilometri: 183.811 km, moč: 235 kW (319,51 KM), prva registracija: 06/2019, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 44 m³, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.410 mm, Leto izdelave: 2019, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, ANTOS 2532 L Beverage Box Body 7.20 m with BÄR BC-S4 3,000 kg Tail Lift * Body: ORTEN Swing Wall Overhead Roof * 4-row rear load securing, LASI VDI 2700 compliant * Rear tag axle 7.5 t, steered and liftable * Vehicle number for customer inquiries: 4543 * Engine specification: Euro VI with OBD-C * Rear tag axle, 7.5 t, steered, liftable * Active Brake Assist * Rear axle differential lock * Air conditioning * Radio/navigation system with Bluetooth, comfort version * Lane Keeping Assist * Tail lift * Standard trailer coupling, D40, Ringfeder * Attention Assist * High Performance Engine Brake * Air suspension, rear axle, low-frame * Adjustable air deflector * Axle configuration 6x2 * Electronic Stability Program (ESP) * Front axle with air suspension * Rear trailer brake connection, Duo-Matic + Standard * Two-line trailer brake, brake connections on left * 12V trailer socket, 13-pin, fixed to frame, LED * 24V trailer socket, 15-pin * Antos * Electronic braking system with ABS and ASR * Driver's comfort air suspension seat * Gearbox G 211-12/14.93–1.0 * Comfort locking system * Mercedes PowerShift 3 * External sun visor, transparent * Digital tachograph, EC, with rev counter * Cruise control * High storage compartment on engine tunnel * AdBlue tank 60 l, left * Hill start assist, speed limiter 30 km/h * Roof hatch/ventilation flap * Weight variant 26.0 t (7.5/11.5/7.5) * Heating, electronic air supply unit * Engine OM936, inline 6-cylinder, 7.7 l, 235 kW (320 hp), 1300 Nm * Wheelbase 4600 mm * Tubeless tires, 315/70 R 22.5 rear axle * Tubeless tires, 315/70 R 22.5 front/middle/rear tag axle * S-Cab ClassicSpace, 2.30 m, tunnel 320 mm * Side sunblind, driver's side * Fuel tank 290 l, left, 650 x 565 x 950 mm, aluminum * Pre-equipment for toll system * Environmental badge (green) * Two-seater * Full service history * 2/3-doors Nodpfx Asx Im Ukjgxswf No liability for typographical or printing errors Sale to trade customers only Errors and prior sale excepted – subject to change without notice. Description is for vehicle identification only and does not constitute a warranty under commercial law. The contractual description in the purchase agreement is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING, FINANCING, or HIRE PURCHASE plan Warranty insurance available on request from insurer * TÜV / UVV LBW / tachograph testing and installation of OBU device by our local partners * Zoll (export) plates for 30 days All export documentation possible upon request, must be arranged individually * Toll registration for Toll Collect can be handled in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL BY TRAIN STATION: 72555 METZINGEN/ WÜRTT. * FOR ENGLISH: Andreas Pittas, Thomas Pittas, Alexander Pittas, Robin Pittas WHATSAPP Number ---- Visit our website: * Over 200 vehicles always in stock

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Features and technical specifications: - Professional panel saw in heavy-duty construction - With scoring unit; externally adjustable with separate drive motor Nwodsx Hbruspfx Agxef - Sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - With integrated on/off switch on the sliding table - With motorized height and tilt adjustment of the saw unit, digital display for tilt - Programmed control of saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality Made in Italy - Maximum cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut capacity to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Stanje: dober (rabljeno), Cantilever racking OHRA 3 m high Over 100 m in stock, see photos. Height: 3 m Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms Nsdpfscd Dwyox Agxowf Negotiable price: €2,360.-- net Offer includes: 4 uprights with base, 3 m high 4 adjustable arms per upright, 100 cm each, load capacity 800 kg/arm Diagonal bracing, stiffeners, and spacers included. Frame spacing: 150 cm Load capacity per upright per side: 3,200 kg Other heights available: 2.5 m, 4 m, or 6 m Other configurations available on request: Over 3,000 running meters of pallet racks from various manufacturers in stock at all times. Transport and assembly available on request. (Technical modifications, errors in data, specifications and prices, and prior sale excepted! See our Terms and Conditions; all prices ex VAT ex works.) Purchase / Sale We are constantly looking for and offering numerous items from various sectors Broom-clean business clearances Company liquidations Fast - flexible - efficient! We also clear out and/or dispose for insolvency administrators. Send us some keywords and we will get back to you promptly. To visit our page, please click on our logo!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 125.000 km, moč: 110 kW (149,56 KM), prva registracija: 07/2011, vrsta goriva: dizel, barva: bela, emisijski razred: Euro 5, Leto izdelave: 2011, Oprema: ABS, klimatska naprava,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 820 mm, skupna širina: 590 mm, gradbena širina: 715 mm, skupna dolžina: 48.000 mm, dolžina opore: 3.000 mm, Rabljeni pogonski valjčni transporter s skupno dolžino 48 m, vključno z ovinkom 90°, idealen za paketno pošiljanje. Transporter ima valje s premerom 49 mm na razdalji 130 mm, notranja širina znaša 590 mm, zunanja širina pa 715 mm. Po višini nastavljiva konstrukcija je nastavljena na 820 mm in je sestavljena iz 3 m dolgih segmentov. Robustno in kakovostno izdelan valjčni transporter je v zelo dobrem stanju in popolnoma delujoč. Samorazstavljanje je idealno, saj omogoča hitro ponovno uporabo. Sistem ima 3 segmente z motornimi pogoni, zato ga je možno razdeliti na tretjine. Po želji nudimo tudi demontažo in dostavo. Valjčni transporter za spletno trgovino 47 m, 3 motorji in 90° ovinkom. Nwjdey Aahgspfx Agxof

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2021, prostornina tovornega prostora: 25 m³, Leto izdelave: 2021, Oprema: ABS, Jeklena prekucna korita s 3 osmi Dolžina nadgradnje pribl. 7.480 mm Širina nadgradnje pribl. 2.354 mm Višina stranic pribl. 1.460 mm Višina nakladanja pri praznem SKH pribl. 2.995 mm Prostornina: 24,6 m³ Medosna razdalja 4.800 mm Velikost pnevmatik 385/65R22.5 - Izjemno lahek okvir podvozja 7.2, varjen iz finega jekla - Nosilec za metlo in lopato - Medosna razdalja osi 1310/1310 mm Nwsdpfjy Dyuiex Agxjf - Dvižni podvozni ščit - Dvig osi: 1. os samodejno/pnevmatsko, električna pomoč pri speljevanju - Zračno vzmetenje - Samodejno spuščanje pri nagibanju - Manometer za obremenitev - LED svetlobni sistem, LED zadnje luči - SCB drsna ponjava, električno upravljanje za poševni RWK Vse informacije brez jamstva. Možne napake. Možna vmesna prodaja.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), največja višina reza: 200 mm, največja širina rezanja: 1.450 mm, premer žaginega lista: 550 mm, največja hitrost vrtenja: 4.800 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna masa: 1.280 kg, dolžina rezanja (maks.): 3.200 mm, višina reza z zareznim rezilom (max.): 200 mm, širina reza pri vzporednem vodilu: 140 mm, dolžina mize: 3.200 mm, Oprema: dozator, motorna zavora, Heavy-duty panel saw with scoring unit and Siemens three-axis control Suspended operator panel with Siemens control and 10" large touchscreen display Control of saw blade height/tilt and positioning of the rip fence via the operator panel Max. cutting height: 200 mm Scoring unit with separate drive motor Nwedpfevmfawsx Agxsf Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High net weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminium rip fence with three folding stops and digital position display Powerful 7.5 kW main motor mounted on a robust cast iron frame Quadruple-supported sliding table with double trolley made of anodised aluminium featuring high torsional rigidity Multiple locking positions on the sliding table Standard with steel sheet table extension and table widening Large swing-away overhead guard, easily adjustable via gas pressure spring Saw blade clamping via tool-free rapid system The panel saw is set up in our demonstration centre in Chemnitz. It is new and unused. We are happy to assist with transport, installation, and commissioning.

Stanje: novo, lastna masa: 7.320 kg, največja dovoljena obremenitev: 22.680 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.100 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading platform length 8,100 mm, loading height (laden) approx. 900 mm, 20 lashing rings, each rated for 10 t, 14 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring assist for one-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or straps, contour markings as per regulations, spring-loaded parking brake, vehicle fully hot-dip galvanized, Nsdpfxeyy Naye Agxewf Surcharges available for: warning panels with lighting and beacon = Price: €800, platform widening to 3 m = Price: €1,100, hydraulic one-piece ramps = €500. Also available with 9 m loading platform length and platform widening in stock. -- Subject to typing errors, mistakes, and changes. Sample images -- More data available at: !, More details: !

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Nwjdpfxeyy I U Aj Agxsf

Stanje: novo, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina nalagalne površine pribl. 940 mm, 20 pritrditvenih ušes po 6 t, 20 pritrditvenih zank po 6 t, 18 pritrdilnih lukenj, 7 središčnih odprtin za kole, 14 odprtin za kole v zunanjem okvirju, 2 para kontejnerskih zapahov, Doplačilo za sprednjo steno pribl. 1.600 mm visoko, snemljiva Cena: 1.500 €, Doplačilo za izvlečno vlečno kljuko Cena: 1.500 €, Doplačilo za 4 opozorilne table z razsvetljavo Cena: 800 €, Na voljo tudi z dolžino nakladalne površine 8.600 mm, 9.000 mm ali 10.500 mm! -- Napake pri tisku, napake in spremembe pridržane, slike so vzorčne -- Več podatkov na zahtevo! Nwodpfjyyzf Iex Agxsf

Stanje: novo, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Nakladalna višina ca. 940 mm, stranske stene 600 mm, 20 pritrdilnih ušes po 6 t, 20 pritrdilnih spon po 6 t, 18 pritrdilnih lukenj, 7 sredinskih žepov za stebričke, 14 žepov za stebričke v zunanjem okviru, 2 para kontejnerskih zapiral, doplačilo za sprednjo steno ca. 1.600 mm višine, odstranljiva Cena: 1.500 €, doplačilo za vlečno oje, izvlečno Cena: 1.500 €, doplačilo za 4 opozorilne table z osvetlitvijo Cena: 800 €. Na voljo tudi z dolžino nakladalne površine 8.600 mm, 10.000 mm ali 10.500 mm! -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih informacij, vzorčne slike --, Več podatkov na: !, More Details: ! Nwedpoyyzfzsfx Agxof

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2150, lastna masa: 5.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2016, naslednji pregled (TÜV): 04/2026, prostornina tovornega prostora: 27 m³, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 1.310 mm, barva: srebrn, Leto izdelave: 2016, Oprema: ABS, Kempf aluminijasta kesona s kovinskim šasijem, 27 m³, dvižna os, rolo ponjava, podest, zložljiva zaščita proti podletu, BPW osi z disk zavornim sistemom, nemška polprikolica. Prodaja izključno pravnim osebam in brez kakršnekoli garancije. Dobavimo v katerokoli nemško morsko pristanišče. Nwedpfxex Rrfmj Agxjf

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 9.435 h, nosilnost: 1.800 kg, dvižna višina: 5.220 mm, prosto dvigovanje: 1.850 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.350 mm, kapaciteta baterije: 625 Ah, preostala kapaciteta baterije: 85 odstotek, napetost baterije: 48 V, Certificirano po DGUV do: 04/2027, dolžina vilic: 1.600 mm, Oprema: CE označba, UVV varnostni pregled, bočni pomik, osvetlitev, popolna servisna zgodovina, Linde E 18 L-01 electric forklift with the following specifications: Operating hours: 9,435 Lifting capacity: 1,800 kg Lifting height: 5,220 mm Overall height: 2,350 mm Year of manufacture: 2014 Nwjdpfxoyuafno Agxef LINDE 1.8 ton electric three-wheel forklift with front and overhead windows, near-new battery from 2023, good front tires, new rear tires, triplex mast with full free lift, side shifter, mini-levers, dual-pedal controls, lighting, fork length 1,600mm (or 1,200mm), battery charger. Price ex works, incl. 1,000-hour service per Linde manufacturer's specification and valid UVV inspection. Viewing, demonstration and test drive available by prior telephone appointment. Sale exclusively to businesses, subject to prior sale and errors or typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp-equipped low loader (transport costs upon request). Further information and additional offers can be found on our website!

Stanje: rabljeno, prevoženi kilometri: 269.811 km, moč: 115 kW (156,36 KM), prva registracija: 12/2014, vrsta goriva: dizel, skupna masa: 7.490 kg, naslednji pregled (TÜV): 03/2027, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, prostornina tovornega prostora: 36 m³, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.380 mm, Leto izdelave: 2014, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, ATEGO 816 L box body 6.10 m with 1 t tail lift * AIR CONDITIONING + 3-seater cab * Vehicle No. for customer inquiries: 4657 * Engine version Euro VI * Air conditioning * Middle seat with 3-point seatbelt * Tail lift * Rear axle air suspension * Stability control assistant (ESP) * Electronic braking system with ABS and ASR * Driver’s standard air-sprung seat * Gearbox G 71-6/9.20-1.0 * Mercedes PowerShift 3 * Exterior sun visor, transparent Njdpfxeyz Eims Agxswf * Cruise control * 25 l AdBlue tank * Roof hatch/roof ventilation flap * Weight variant 7.49 t (3.4/4.6) * Main mirror, electrically adjustable, driver’s side * Heating, electronic air supply unit * 120 l plastic tank, left side * Engine OM934, R4, 5.1 l, 115 kW (156 HP), 650 Nm * Wheelbase 4220 mm * Tubeless tires, 215/75 R 17.5 VA/VLA * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer under frame, rear axle * Digital tachograph, EC, rev counter, ADR * Emissions sticker (green) * Three-seater cab No liability for typographical or printing errors Sale to trade customers only Subject to prior sale and errors. Changes, prior sale, and errors expressly reserved. The description is for vehicle identification only and does not constitute a guarantee in the legal sense of sales law. The specification in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCING-INSTALLMENT PURCHASE proposal * Warranty insurance available on request from the insurer * TÜV / UVV tail lift / tachograph inspection and OBU device installation by our local partners * Export license plates for 30 days All export customs documents possible, but must be requested individually * TOLL for Toll-Collect can be booked onsite * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2016, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, velikost pnevmatike: 445/45 R19,5, barva: modra, Oprema: ABS, dvižna zadnja plošča, KRONE SD standardna polprikolica z MBB/Palfinger 2,0 t podzložljivo dvižno ploščadjo BPW osi z disk zavorami Zračno vzmetenje z dvigom/spustom Wabco SmartBoard ABS/EBS 2x 7-polni električni vtikač 15-polni električni vtikač Dvižna streha Edscha pomična streha Drsna ponjava/Curtainsider Portalna vrata Orodjna skrinja Nodoyugg Ejpfx Agxswf Lastna teža 7.060 kg Dovoljena skupna masa 39.000 kg Dimenzije tovornega prostora D 13,62 m x Š 2,48 m x V 2,79 m Pnevmatike 385/65 R22,5 Globina profila: 1. os 10-10 mm 2. os 5-12 mm 3. os 10-15 mm

Stanje: pripravljen za uporabo (rabljen), Na voljo je popolna dvojna mešalna naprava 2 x 3000 l iz visokokakovostnega nerjavečega jekla V2A, vključno s propelerskimi mešali iz V2A, s tekočo nastavitvijo števila obratov. Ogled možen po dogovoru. Nwodpfx Aey A Sk Tegxof