Demag Mostni Žerjav Žerjav Na Meter nakup rabljenega (30.380)

Stanje: rabljeno, Leto izdelave: 2000, (1) Brizgalni stroj, rokovanje: Wittmann | WX142-0325 | 2023 Razno: 1x zaščitni pokrov 1x rokovalni sistem, podjetje Wittmann, serija 9 1x transportni trak z možnostjo menjave zabojev Rjdpfxsy N R Uqj Apbeu 1x V2A drč za izmet 1x Euromap 12/67 predelava 1x zunanji sistem vročih kanalov, podjetje Mold Masters M1-06-12 (leto izdelave 2016), 12 con 1x transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 196 Tok 2 (A): 110 Tok 3 (A): 86 Tok 4 (A): 67 Teža (t): 9,7 Tlak (bar): 190 Pretok (l/min): 190

Stanje: rabljeno, Leto izdelave: 2014, (1) Stroj za brizganje, Ravnanje: Sepro Robotique | Success 22 | 2016 Kontrola temperature: GWK Razno: 1x zaščitni pokrov 1x transportni trak, 1x transportna enota, podjetje Somos FG 204; leto izdelave 2022 Tehnične podrobnosti: Sila zapiranja (kN): 2100 Razmak veznih stebrov (mm): 580 Brizgalna enota: 430 Redjy N R R Espfx Apbju Napajanje: 3/400 V Frekvenca (Hz): 50 Tok 1 (A): 175 Tok 2 (A): 116 Tok 3 (A): 59 Teža (t): 8,93 Tlak (bar): 190

Stanje: rabljeno, Leto izdelave: 2003, (1) Brizgalni stroj, Ravnanje: Wittmann | W621 | 2003 Nadzor temperature: HB Therm | HB-100 Z1 | 2013 Razno: 1x Zaščitni ohišje 1x Transportni trak 1x Krmilnik vročih kanalov, podjetje Mold Masters, 1x Transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Rsdpfxjy N R Iqo Apbju Frekvenca (Hz): 50 Tok 1 (A): 189 Tok 2 (A): 152 Tok 3 (A): 37 Teža (t): 10,1 Tlak (bar): 190 Pretok (l/min): 206

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18616 Manufacturer: DEMAG Model: IntElect 80/370-100 NC4 Year of manufacture: 2007 Clamping Unit Clamping force: 80 t Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4,750 kg Additional information: Technology that sets new standards in energy efficiency: Lower power consumption, higher precision The Demag IntElect series pioneered the introduction of fully electric drive technology to the plastics injection molding sector in the late 2000s. In contrast to conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is only activated when movement is actually required. This fundamental difference provides energy savings of 50–70% compared to hydraulic machines, significantly reducing annual operating costs. Motor system — Siemens MOTICS 3 Main drive motor: water-cooled servo motor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor: water-cooled servo motor Based on the same Siemens MOTICS 3 platform, this motor ensures homogeneous material melt through precise speed and torque control; the water-cooled design enables stable operation during continuous high-volume production. 5-axis fully servo-controlled system Rodpfx Apezabkvsbou The machine features five independent servo motors. Clamping, injection, screw retraction, ejection, and plasticizing are all fully servo-controlled. Because each axis can be programmed independently, all movements can be performed simultaneously. This architecture delivers repeatedly precise, micrometer-level accuracy, reduced cycle times, and minimal mechanical wear compared to hydraulic configurations. NC4 control system The keypad-based NC4 control system manages all machine parameters—including injection profile, mold protection, and cycle analysis—via a single display.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Hydraulic injection moulding machine from 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mould height of 1530 mm. It is equipped with a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking for a high-quality injection moulding machine, you should consider the DEMAG 420/810 - 2300 we are offering for sale. Please contact us for further details. • Tie bar distance (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mould height: 820 mm • Max. mould height: 1530 mm • Max. daylight between platens: 1530 mm • Max. weight of the moving mould half: 2200 kg • Diameter/height of the centring ring: 160 × 15 • Sprue bush radius: R19 • Diameter of the ejector coupling thread: M24 • Shot volume: 1090 cm³ • Hot runner zones: 8 • Air cascade (quantity): 6 Redjy Nyflepfx Apbou • Cascade hydraulics (quantity): 6 • Hydraulic core pulls: 2 • Oil fill capacity: 730 • Power supply: 217 A • Connected load: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002

Stanje: zelo dobro (rabljeno), nosilnost: 5.000 kg, DEMAG P-Zug Rjdpfx Apsy Swb Asbeu Nosilnost 5 t Hod poti kavlja 5,5 metra 2 hitrosti dviga: 4/0,4 m/min Električni voziček Zelo dobro ohranjen, uporabljen le občasno.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 2.000 mm, nosilnost: 1.500 kg, Prodam vrtljiv žerjav z verižnim vitlom Demag, višina stebra je 286 cm, dolžina roke od vrtljivega čepa 320 cm. Rodeymv T Sopfx Apbsu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech 80-310 Compact Rjdpowav Htsfx Apbju Schließkraft: 80 Tonnen Baujahr: 1995 Holmenabstand: 400 x 400 mm Schneckendurchmesser: 40 mm Schussgewicht: 196 g

Stanje: rabljeno, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase linear-rotor motor DEMAG Type: KBA 125 B Motor no. 3926599 Speed: 915 rpm Motor power: 4.7 kW Mains connection: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement in direct drive 1 unit three-phase linear-rotor motor DEMAG Type: KBA 80 A Motor no. 3926599 Speed: 1360 rpm Motor power: 0.83 kW Mains connection: 400 Volt, 50 Hz Redpfoy N D E Aex Apbsu - Brake disconnects via armature thrust movement when driving - When stationary, the brake operates via the reduction gearbox on the motor - Output speed via the gearbox: 174 rpm Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no. 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor rotor: Ø 32 mm Shaft stub length: 80 mm Pilot diameter on motor: Ø 125 mm Bolt circle diameter on motor: Ø 150 mm / 4xM12 internal thread Dimensions LxWxH: 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Stanje: rabljeno, Leto izdelave: 1978, Doseg 5.500 mm Nosilnost 250 kg Višina 3.800 mm Dvižna višina 3.800 mm Številka žerjava 1.30 Tehnični podatki so podatki proizvajalca ali upravljavca in so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; izključno veljajo naše poslovne in prodajne pogoje. O nas Rsdpfx Aoyqvliopbsu več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna zmogljivost 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: zelo dobro (rabljeno), DEMAG verižni dvigalo Tip PK 2 N-F Dvižne hitrosti: 10 in 2,5 m/min 380 V 0,5 kW Pogon vozička: 380 V 0,5 kW Rsdpfx Ajy Sldlopbsu

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Pogon: kolesni Lastna teža: 22.000 kg Dvižna zmogljivost: 30.000 kg Dimenzije tovornega prostora: 830 x 240 x 345 cm Serijska številka: 86584 Rjdpfx Apswwqbysbju Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Za dodatne informacije se obrnite na skupino PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Namen uporabe: Gradbeništvo Pogon: Kolesa Lastna teža: 48.000 kg Dvižna zmogljivost: 220.000 kg Serijska številka: 82609 Rsdpswk T Uijfx Apbju Stanje prednjih pnevmatik: 90 Stanje zadnjih pnevmatik: 90 Transportne mere (D x Š x V): 15,3x3x4 Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Rsdpfowk Aw Hox Apbju Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information & extras Core pull: 1 pc. Additional information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, fully electric injection moulding machines developed specifically for technical plastic components, automotive applications, electronic parts, and demanding serial production. All main machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector functions are performed entirely electrically, allowing for highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. At the same time, the low heat generation reduces the cooling requirement and lowers overall operating costs. The machine features a direct servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticising and stable process conditions, especially with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance Rodpfx Ajy Ub D Tjpbsu * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision components * Suitable for fast serial production Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains among the most sought-after fully electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Redpfx Apsy Ub D Hebsu Clamping Unit Clamping force: 100 ton Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components, and demanding mass production requirements. All major movements of the machine are driven by direct-drive servo-electric motors. Injection, dosing, mould movements, as well as ejector functions are fully electric, providing the highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the reduced heat generation lowers the cooling requirements and further reduces overall operating costs. The machine is equipped with a direct servo injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features 4 heating zones to ensure homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance effort * Clean production environment * Ideal solution for technical and precision parts * Suitable for rapid mass production Thanks to its long service life, consistent production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market even today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18620 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2180 bar Dimensions and Weight Dimensions (L x W x H): 4.8 x 1.4 x 2.2 m Machine weight: 5500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components as well as demanding high-volume production. All main movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements and ejector functions are fully electric, thus providing maximum precision, excellent repeatability and outstanding process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on application. Low heat generation also reduces cooling requirements and lowers overall operating costs. Rjdpfxsy Ub Dyo Apbeu This machine is equipped with a direct servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit features 4 heating zones to ensure homogeneous plasticising and stable process conditions, particularly for technical plastics. Key Advantages of the IntElect Series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast serial production Thanks to its long service life, stable production output and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight PS: 76 g Injection pressure: 2180 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: Rodpfey Ub Dtsx Apbsu The Sumitomo (SHI) Demag IntElect series is a range of high-precision, all-electric injection moulding machines designed specifically for technical plastic parts, automotive applications, electronic components, and demanding series production. All main movements of the machine are driven by direct-drive servo electric motors. Injection, dosing, mould movements, and ejection functions are fully electric, enabling maximum precision, outstanding repeatability, and optimal process stability. The IntElect series is particularly known for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% to 80% can be achieved, depending on the application. At the same time, minimal heat generation reduces cooling requirements and thus overall operating costs. The machine features a direct servo injection and dosing system, which allows for extremely fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous melt plasticisation and stable process conditions, especially for technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low noise and vibration levels * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed series production Due to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2012, Ref. No.: 18610 Manufacturer: DEMAG Model: IntElect 160/520-340 NC5 Year of manufacture: 2012 Clamping Unit Clamping force: 160 t Opening stroke: 495 mm Tie bar spacing (h x v): 520 x 520 mm Minimum mould height: 275 mm Maximum mould height: 585 mm Platen size (h x v): 760 x 785 mm Injection Unit Screw diameter: 35 mm Shot volume: 156 cm³ Shot weight PS: 139 g Injection pressure: 2180 bar Dimensions and Weights Dimensions (LxWxH): 5.4 x 1.5 x 2.1 m Machine weight: 7600 kg Additional Information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, fully electric injection moulding machines developed specifically for technical plastic parts, automotive applications, electronic components, and demanding high-volume production environments. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements and ejector functions are performed entirely electrically, delivering maximum precision, outstanding repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and its high production accuracy. Depending on the application, energy savings of approximately 60% up to 80% can be achieved compared to conventional hydraulic injection moulding machines. At the same time, lower heat generation reduces cooling requirements and cuts overall operating costs. The machine features a direct servo-driven injection and dosing system which provides very fast response times and highly accurate injection control. The injection unit is equipped with four heating zones, ensuring a homogeneous melt and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption Rjdpfoy Ub Dmox Apbou * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume productions Thanks to its long service life, stable production performance and outstanding energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Concept 125/475-320 Rjdpfxsxd Sz Ee Apbeu Zatezna sila: 125 ton 2 x izvleki jedra na premičnih ploščah + Robot Demag W621-1831: X-550, Y-1000, Z-2000 (2004)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 3.000 kN, skupna masa: 13.900 kg, Ta 5-osni DEMAG ERGOTECH CONCEPT 3000-1450 je bila izdelana leta 2001. Ima zapiralno silo 3000 kN in maso stroja 13,9 ton. Z maksimalnim hidravličnim tlakom 190 bar in pretokom 164 l/min je ta stroj zasnovan za učinkovito delovanje. Če iščete visokokakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju DEMAG ERGOTECH CONCEPT 3000-1450, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Maks. hidravlični tlak: 190 bar • Maks. pretok: 164 l/min • Skupni tok: 181 A • Tok ogrevanja: 102 A • Pogonski tok: 79 A • Krmilni tok: 67 A • Obratovalna napetost: 400 V Rodpoy Icikjfx Apbou • Frekvenca: 50 Hz • Certifikat: CE

Stanje: dober (rabljeno), For sale: CRATHERN, PERONDI IA630, NA 900. Rsdpfx Apeud Axgobou

Stanje: zelo dobro (rabljeno), Catalogue number: 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer in very good condition TECHNICAL DATA - Max planing width: 610 mm - Max planing height: 200 mm Rodpfx Asy Sny Aepbsu - Top section: - Geared infeed roller - Kickback fingers - Pressure beam - 2 geared feed rollers - Pressure beam - Planing shaft: 610 mm, 6 knives, 15 kW - Pressure beams - Outfeed smooth feed roller - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Geared feed roller - Planing shaft: 610 mm, 6 knives, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear section: - 2 side spindles + pressure systems: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW (electronically adjustable left/right) - Spindle diameter: 40 mm - Spindles adjustable alternately - Spindles adjustable up/down, left/right 3) Additional lower horizontal spindle 160 mm, adjustable up/down + left/right, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal idler rollers, 2 lower rubber-driven rollers - Adjustable rollers in lower table - Electric adjustment of planing height - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120 mm, 2×160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (subject to 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Premer vijaka: 50 mm Premer vijaka 2: 22 mm Redpfx Apeyz Tmysbeu Razdalja med stebri V: 580 mm Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični 2x hidravlični ventil

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, nosilnost: 125 kg, globina grla: 6.000 mm, Naprodaj je galgenski žerjav znamke Demag (Demag Cranes & Components GmbH), tip D-AS270. Žerjav je popolnoma funkcionalen in takoj pripravljen za uporabo. Rjdoy Dqmpjpfx Apbsu Tehnični podatki: Leto izdelave: 07/2003 Nosilnost: 125 kg Izpust: 6 m Kot vrtenja: 270 ° Po želji se lahko organizira transport in nakladanje za doplačilo, po vsej Evropi. Cene so navedene brez DDV. Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Možen je tudi odkup ali menjava! Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV TER OSTALO. Potrebujete kakovosten, a cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali pa želite svojega prodati? Za več informacij ali kontakt nas obiščite na naši spletni strani.