Danfoss Vlt Hvac Drive Fc 102 nakup rabljenega (23.645)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Without turning device Direct Drive InlineColorPilot IPC (Graphometronic): Register and color measurement and control system PressPilot control desk APL (fully automatic plate changer): Automatic plate changing system with motorized clamping and tensioning of the printing plates IntegrationPilot plus Automatic impression cylinder washing device Automatic ink roller washing device Automatic blanket washing device with brush SelectAntistatic ionization system: feeder & delivery section manufacturer Eltex Non-stop LCS: Low Coverage Stabilisation software for inking unit adjustment at very low output Quickstart: software for optimizing machine control after stops Inking unit temperature control Grapho Metronic Technotrans cooling and circulation Pedpfxox Nm Ade Agxjgk QuickChange Infeed: automatic selection and motorized positioning of front lays QuickChange Air: job-specific and reproducible air settings for all relevant air consumers via the control desk Double sheet control – electronic Rolandmatic dampening unit Airglide delivery BECKER VariAir compressor cabinet Powder extraction including SCIP self-cleaning system, manufacturer Schneider Dynamic sheet brake Impression counter reading: 270 million

Stanje: rabljeno, številka stroja/vozila: IC1333, Leto izdelave: 2018, obratovalne ure: 5.936 h, nosilnost: 1.300 kg, dvižna višina: 5.000 mm, gradbena višina: 2.235 mm, vrsta motorja: Električni, proizvajalec: Jungheinrich Pgedpfxsy Eaz Es Agxok

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 227 kg, lastna masa: 900 kg, gradbena višina: 1.880 mm, vrsta goriva: električni, skupna dolžina: 2.000 mm, vrsta pogona: Elektro, gradbena širina: 810 mm, delovna višina: 6.300 mm, Škarjasta dvižna ploščad Tehnično stanje: Novo Pgjdpfx Aeyw Az Eogxsk

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 227 kg, lastna masa: 900 kg, gradbena višina: 1.880 mm, vrsta goriva: električni, skupna dolžina: 2.000 mm, vrsta pogona: Elektro, gradbena širina: 810 mm, delovna višina: 6.300 mm, Škarjasta dvižna ploščad Tehnično stanje: Novo Podpfxeyw Az So Agxegk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Podvozje za robne lepilke Bil je nameščen na Homag Edgeteq S-200, KDF 1130 FC (1100 kg). Zagotovo pa ustreza tudi drugim strojem, npr. Brandt (morda bodo potrebne manjše prilagoditve) Dolžina U-profilov pribl. 1130 mm Vgradna višina z valji pribl. 150 mm 4 robustna kovinska vrtljiva kolesa z mazalko 2 zavore Pgedpfx Ajw S Dmdjgxek 2 podložni plošči za uravnavo višine Stroj je možno po dogovoru prikazati na naši lokaciji. Ponujamo samo stroje, ki so pripravljeni za prikaz v naši skladišču; glejte še "druge ponudbe tega ponudnika".

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, nazivna moč: 5,5 kW (7,48 KM), Premer cevi (maks.): 1.600 mm, hitrost vrtenja (razdalja/čas): 36.000 mm/min, najv. debelina pločevine: 2 mm, najv. debelina bakrene pločevine: 1 mm, najv. debelina jeklene pločevine: 1 mm, maks. debelina pločevine iz nerjavečega jekla: 1 mm, Oprema: dozator, nujno zaustavitev, HVAC – Stroj za izdelavo spiralnih cevi (SPIRO) iz pločevine, dolžina 120–8000 mm, širina traku 137 mm, debelina pločevine: pocinkano 0,4–1,2 mm / inox 0,4–0,8 mm / Al 0,5–1,5 mm / Cu 0,5–1,2 mm, hitrost 1–36 m/min, PLC, rezanje z žago (4 kW), glavni pogon 5,5 kW. Ta stroj je srce proizvodnje: sprejema trak in hitro proizvaja spiralne cevi. Spirol cevi premera 80–1600 mm. Priložena so rezervna vodilna kolesca in trakovi za različne premere cevi. Več informacij na naši spletni strani. Na fotografijah je stroj v transportnem stanju. Podpfxjykpb Re Agxogk

Leto izdelave: 2025, stanje: novo, New machine Podpjwx Aadjfx Agxogk Year of manufacture: 2025 Features and technical specifications: Standard configuration: - Robust machine base body - Dowel system for: dowel diameter 8 mm dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) recoil-free insertion gun vibratory feeder for dowel transport dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels water tank (stainless steel, 7.5 liters) closed water system with 6 bar water pressure and spray nozzle - Electronic control system with: main power switch ON / OFF program selector switch water / water + insertion potentiometer for dowel feed rate via vibratory feeder potentiometer for water injection quantity indicator light for minimum water level in tank - Chassis/mobile base - Pneumatics: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-bore processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit incl. devices for hanging/connecting to the DübelJet incl. height-adjustable suspension for glue hose/ Included: 1 HoKuTech | LeimJet glue dispensing unit for counter-bore application for use with PVAc glues up to 75,000 mPas viscosity incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Stanje: rabljeno, Electric Lifting Platform – Pedestrian Stacker, Tiller Stacker for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Podpoflt Egjfx Agxegk Serial No.: 19153-HD Year of manufacture: 2010 Model No.: Rated capacity: 225 kg Lifting stroke: 1770 mm Lift height: 2350 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis configuration (front/rear): Ø 80 / 150 mm (2 fixed / 2 swivel castors) Total length: 1130 mm Total width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 pcs lead-acid batteries, 12 Volt, 17 Ah installed in battery pack, battery NEW - External charger 24 VDC, 3 ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-position parking brake - Continuously height-adjustable handle - Load handling flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 spaced 100-120-100 mm Mounted lifting aid: Quadruple fork attachment Expresso type, lifting aid capacity 40 kg - Lifting aid manually swivels by 90° (can only be locked in 0° position) - Lifting aid laterally shiftable on linear guide by +-100 mm (locking only in center) - Width between holding arms: 320 mm - Height between holding arms (height lockable at): 365 / 400 / 450 mm (max. opening width without locking hole: 510 mm) - Depth between holding arms: 150 mm to stop bolt / 300 mm maximum Total weight: 100 kg good condition

Stanje: rabljeno, Electric Loading Lift – Pedestrian Stacker, Pallet Truck for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No. 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1,680 mm Lift height: 2,200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 861 mm Chassis length: 1,020 mm Underride height: 90 mm Underride length: 600 mm Chassis configuration (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1,400 mm Overall width: 600 mm Overall height: 2,450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick change system - Charge status indicator Pjdsflt Edepfx Agxsgk - 2 lead-acid batteries, 12 Volt, 17 Ah integrated in battery pack - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually movable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load reception flange according to EXPRESSO standard Special design: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid swivelable 90° via manual hydraulic pump - Opening width between support jaws: 300 / 330 mm - Opening width between clamping rollers: 200 – 300 mm - Clamping via hand wheel - Dead weight of lifting aid: 60 kg Total weight: 140 kg Very good condition

Stanje: rabljeno, Electric Lift Truck – Pedestrian Stacker, Tiller Stacker For ergonomic handling of small loads EXPRESSO Type Lift & Drive 125 (lift2move) Serial No.: 194679 Year of Manufacture: 2015 Type No.: 1418242111 Rated capacity: 125 kg Lift travel: 1450 mm Lift height: 1785 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid reach: 530 mm Chassis length: 890 mm Clearance height: 90 mm Clearance length: 490 mm Psdpfsflt Ebjx Agxjgk Chassis design (front / rear): Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length: 890 mm Overall width: 545 mm Overall height: 1930 mm Motor power: 250 W Battery capacity: 24 V / 7.2 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 pcs. lead-acid battery 12 Volt, 7.2 Ah integrated in battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Manually movable, swivel castors with three-stage locking brake - Continuously height-adjustable handle - Load support U-profile for square section according to EXPRESSO standard 210 x 45 mm / internal size 30 mm / 4 mounting holes M8 spaced 50-60-50 mm Mounted lifting aid: Special design by GIESLER, type LAM-DC power rail Lifting aid load capacity: 40 kg Lifting aid net weight: 24 kg Support rail laterally adjustable via linear guides ±90 mm (3 locking positions: left, center, right) Support rail tiltable ±38° (infinitely lockable) Support rail with 2 clamping tongs Distance between clamping tongs: 550 mm Material clamping thickness: 100 mm Dimensions of material support (W x D): 650 x 155 mm Total weight: 75 kg Very good condition

Stanje: rabljeno, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Pgedpjw Uc T Ijfx Agxjk Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Stroke length: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ballscrew Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum ballscrew spindle speed: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Power consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Almost identical linear unit under stock number 59700 Servo drive controller 61488 = compatible with linear units 59702 + 59700

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 3.596 h, številka stroja/vozila: G320-00-6364, vrsta goriva: dizel, Lastna masa: 31.200 kg Dvižna zmogljivost: 1.000 kg Delovna višina: 3.400 cm Dimenzije tovornega prostora: 702 x 298 x 363 cm Stanje pnevmatik spredaj: 40 Pgsdpey Hz R Refx Agxjk Stanje pnevmatik zadaj: 40 Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, Roller Conveyor 2750/2180/1500-420-350 with Chain Drive RA2003 The chain-driven roller conveyor is in good (used) condition and fully operational. It is equipped with a SEW geared motor. The support legs are not included in the delivery but are available as an option upon request. Technical Data: Condition: good (used) Conveyor length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (external width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Rollers: galvanized, diameter 50 mm Roller pitch: 65 mm (spacing) Motor: SEW Eurodrive Drive: chain drive with continuous chain, tensioned via adjustment device Electrical specifications: 380 V, 0.75 kW, 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Pgjdpfsk Abtasx Agxok Optional: - Supports - Side guides - Frequency inverter for stepless speed control Availability: 3 identical conveyors – individually adaptable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Roller Conveyor 2750/2180/1500-420-350 with Chain Drive RA2003 Pjdpjrvmtdofx Agxsgk The chain-driven roller conveyor is in good (used) condition and fully operational. It is equipped with a SEW geared motor. The support legs are not included in the delivery but are available as an option upon request. Technical Data: Condition: good (used) Conveyor length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (external width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Rollers: galvanized, diameter 50 mm Roller pitch: 65 mm (spacing) Motor: SEW Eurodrive Drive: chain drive with continuous chain, tensioned via adjustment device Electrical specifications: 380 V, 0.75 kW, 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: - Supports - Side guides - Frequency inverter for stepless speed control Availability: 3 identical conveyors – individually adaptable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Roller Conveyor 2750/2180/1500-420-350 with Chain Drive RA2003 The chain-driven roller conveyor is in good (used) condition and fully operational. It is equipped with a SEW geared motor. The support legs are not included in the delivery but are available as an option upon request. Technical Data: Condition: good (used) Conveyor length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (external width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Rollers: galvanized, diameter 50 mm Roller pitch: 65 mm (spacing) Motor: SEW Eurodrive Drive: chain drive with continuous chain, tensioned via adjustment device Electrical specifications: 380 V, 0.75 kW, 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: - Supports - Side guides - Frequency inverter for stepless speed control Availability: 3 identical conveyors – individually adaptable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consultation, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics. Psdpsk Abtdofx Agxegk

Stanje: rabljeno, Mechanic's Lathe SCHAUBLIN Type 102 Machine No. 1998 Centre Distance: 350 mm Bed Length (total, from headstock): 635 mm Swing over Bed: 200 mm Centre Height over Bed: 102 mm Swing over Cross Slide: 120 mm Centre Height over Cross Slide: 61 mm Spindle Bore: 18/20 mm Spindle Speed, Gear Stage 1: approx. 120 / 190 / 320 rpm Spindle Speed, Gear Stage 2: approx. 590 / 970 / 1500 rpm Chuck Flange External Thread: M38 x 3 mm Tailstock Taper: MK 1 Pjdpfoy Dvf Rex Agxjgk Drive Motor: 0.55 kW, 920 rpm Electrical Connection: 380V, 50 Hz - Spindle speed via 2 gear stages and 3-step belt change - Main spindle with forward and reverse - Spindle nose with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet equipment with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated indexing plate on main spindle with 48 / 60 / 100 holes - Toolholder mounting approx. 10 x 18 mm with clamping screw - Robust wooden base with 42 mm laminated wood tabletop Space requirements with base L x W x H: 1160 x 750 x 1300 mm Weight with base: 150 kg In good condition

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 227 kg, lastna masa: 1.179 kg, gradbena višina: 1.970 mm, vrsta goriva: električni, skupna dolžina: 1.400 mm, vrsta pogona: Elektro, gradbena širina: 810 mm, delovna višina: 7.550 mm, Škarjasta dvižna ploščad Tehnično stanje: Novo Pgsdpex Uum Ijfx Agxsk

Stanje: dober (rabljeno), Schaublin 102 N, Številka stroja BL 329218, Letnik izdelave ca. 1998, Višina konic 102 mm, Razdalja med konicama 375 mm, Najv. premer struženja nad posteljo 200 mm, Najv. premer struženja nad suportom 120 mm, Pjdpoy Hip Isfx Agxjgk Hitrost vretena do 2.800 vrt/min, Konjiček, Dodatna oprema,

Stanje: dober (rabljeno), Schaublin 102 N - VM, Številka stroja: BL 330699, Letnica izdelave: cca 1993, Stroj z vodilnim vretenom, Višina konic: 102 mm, Vodilno vreteno: premer 40 mm, kaljeno in brušeno z navojem. Navoj vodilnega vretena: 4 mm. Pomiki: 8 vzdolžnih pomikov od 0,02 do 0,3 mm/obrat. Območje navojev: Pgodpfx Asy Hin Regxjk Metrski: 20 korakov od 0,25 do 4 mm. Colski: 25 korakov od 80 do 6 tpi. Razdalja med konicama: 450 mm, Največji premer struženja nad posteljo: 200 mm, Največji premer struženja nad sani: 120 mm, Vrtljaji vretena do 2.800 min⁻¹, Konjiček, Pribor,

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, moč: 2,5 kW (3,40 KM), skupna masa: 1.000 kg, dolžina mize: 350 mm, širina mize: 200 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe obvezuje k prevzemu med 23.06.2026 in 26.06.2026! Pjdsy D T Ehopfx Agxogk TEHNIČNE PODROBNOSTI Dimenzije mize: 350 mm x 200 mm PODROBNOSTI O STROJU Priključek: 2,5 kW Dimenzije in teža Dimenzije (D x Š x V): 1.500 x 1.100 x 2.200 mm Teža stroja: 1.000 kg OPREMA Ustrezna delovna miza z različnimi bakrenimi elektrodami Digitalni prikazovalnik z dvema osema (proizvajalec: HEIDENHAIN) Zunanja referenca: 30

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 30 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZS181205-189, število kartuš s črnilom: 6, število tiskalnih glav: 2, loèitev (maks.): 1.200 DPI (pik na palec), skupna dolžina: 120 mm, skupna širina: 110 mm, skupna višina: 65 mm, potrebna širina: 160 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 220 V, moč: 0,7 kW (0,95 KM), skupna masa: 90 kg, Digitalni tiskalnik Freecolor FC-UV4060PRO, kot NOV. Pjdpfxey Dt R Re Agxjgk

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0012077 - Koda proizvajalca: HDS03,2W075N-HS12-01-FW - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Kompatibilen stroj: - Teža: 14 kg - Dimenzije: 70x46x34 - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. Pgjdpfx Asyztwlsgxok

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 5.593 h, številka stroja/vozila: 0300137313, vrsta goriva: dizel, Lastna teža: 20.058 kg Dvižni steber: zgibna roka Pgjdpfx Aoy Hbtlsgxsk Dvižna zmogljivost: 454 kg Delovna višina: 4.010 cm Dimenzije tovornega prostora: 1448 x 249 x 305 cm Stanje sprednjih pnevmatik: 40 Stanje zadnjih pnevmatik: 40 Maks. vodoravni doseg: 1925 m Za več informacij kontaktirajte PFEIFER GROUP.

Leto izdelave: 2026, stanje: rabljeno, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. Accessories: - Full enclosure - Heavy-duty grinding wheel motor, 4 kW - Heavy-duty dressing wheel motor, 2.2 kW - 2 machine lights, 12 V - Glass scale on X and Z linear axes - 2/3" camera system with 17" LCD monitor (microscope with 15-120x zoom) - High-precision angle measuring device (0.05°) - Diamond/CBN wheel spindle, infinitely variable, 100 – 1000 rpm - Dressing wheel speed, infinitely variable, 200 – 2000 rpm - Continuously adjustable oscillation stroke speed - Automatic central lubrication - SIC manual dressing wheel Grinding wheel mount: HSK 50 E Psdpslfil Sofx Agxegk Diamond grinding wheel diameter: 50 – 250 mm Max. grinding wheel width: 70 mm Grinding wheel bore diameter: 20 mm Diamond/CBN wheel spindle speed: infinitely variable, 100 – 1000 rpm Grinding wheel radius: 0–30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Dressing wheel speed: 200 – 2000 rpm Dressing wheel oscillation stroke: 0–70 mm Dressing wheel motor rating: 2.2 kW Weight approx.: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm

Leto izdelave: 2026, stanje: novo, Suitable for dressing and profiling diamond and CBN grinding wheels. Accessories: - Motor upgrade (reinforced motors for the drive of the dressing wheel and the wheel to be dressed) - Reinforced grinding wheel motor with 4 kW - Reinforced dressing wheel motor with 2.2 kW - 2 machine lights, 12 V - Glass scales on the X and Z linear axes - 2/3" camera system with 19" LCD monitor (microscope with 15-70x zoom) - High-precision angle measuring device (0.05°) - Infinitely variable diamond/CBN wheel spindle speed 100 - 1000 rpm - Dressing wheel rotational speed infinitely adjustable 200 - 2000 rpm - Continuously variable oscillating stroke speed - Automatic central lubrication - SIC manual dressing wheel - Protective cover Technical data: - Grinding wheel mount: HSK 50 E - Diamond grinding wheel diameter: 50 - 250 mm - Max. grinding wheel width: 70 mm - Grinding wheel bore diameter: 20 mm - Diamond/CBN wheel spindle speed, infinitely adjustable: 100 - 1000 rpm - Grinding motor: 4 kW - Cross travel: 200 mm - Longitudinal travel: 140 mm - Grinding wheel radius: 0-R30 mm - Dressing wheel: 180 x 25 x 32 mm - Dressing wheel rotational speed: 200 - 2000 rpm Pgjdpfsfpxd Aex Agxjk - Oscillation speed: 3400 mm/1 mm (infinitely adjustable) - Oscillation stroke of the dressing wheel: 0-70 mm - Drive rating of dressing wheel motor: 2.2 kW - Weight: approx. 900 kg - Dimensions: 1165 x 1150 x 1950 mm - Colour: White RAL 9003.