Cronosstech Chsp 2000/600 nakup rabljenega (19.330)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body Lajdpfew Sld Rox Ahuoc * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft Ljdpow Smdfjfx Ahueac * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick-release clamping system • Sliding front support system • Manual crowning system (Original WILA cam lock) • Narrow lower table (European type) • GIVI linear scales • Standard upper die (H:67, 850 R:08) • Standard lower die (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-groove tools • Backgauge X distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge support TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Lsdpex Nn Easfx Ahueac Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank (Liters) 290 Machine Weight (kg) 14,700 Main Motor (kW) 22 CNC Control Unit ESA S640 CNC Axis Count Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 200 mm, širina mize: 1.000 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, thanks to their rigid frame construction. The CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed with a focus on stable operation for high-volume production, die protection, and operator safety. With a monoblock frame, 8-point guided slide system, hydraulic overload protector, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages Stable operation with a large 1000×2000 mm table for big dies Die/equipment protection with hydraulic overload protection Controlled and user-friendly operation via PLC + touchscreen interface High operator safety with photoelectric light curtain (LEUZE) Quick die changes with 99 die memory slots Application Areas Punching/cutting/forming applications requiring large tables Mass production with automatic feeding lines Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch–brake • Additional T-slotted sub-plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterweight piston on slide • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse movement • Overload hydraulic protection • Motorized slide adjustment mechanism • Photoelectric safety curtain • Enclosed lubrication gear unit • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of table • Custom die options ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm SPM (strokes per minute): 25–45 Max. closed die height: 600 mm Min. closed die height: 480 mm Side window dimensions: 600×600 mm Adjustment (slide): 120 mm Ljdpjx N Ruqofx Ahusac Number of connecting rods: 2 Number of eccentric shafts (cranks): 2 Safety fuse: Hydraulic Internal panel switchgear: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating system: 4-position Die memory: 99 slots Mounting style: Floor standing Frame type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.000 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, primarily used for cold forming operations such as punching, cutting, and forming by dies. H type (straight-side) eccentric presses provide high stability and process safety in applications that require large tables and heavy dies, thanks to their rigid frame construction. CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton, is specifically designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock frame, 8-point guided ram system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key advantages: - Large 2000×1200 mm table size for stable performance with large dies - Hydraulic overload safety for die/equipment protection - Precise guidance with 8-point guided ram & balancer piston - PLC + touchscreen for controlled and user-friendly operation - Light curtain safety system for high operator safety Lajdpfx Aox N Rzwjhusc Application areas: - Punching/cutting/forming processes requiring a large table - High-volume production with automated feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel frame construction • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Ram with balancer piston • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD • Motor reverse motion • Hydraulic overload safety • Motorized ram adjustment system • Light curtain safety system • Gear unit in closed oil reservoir • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Dies with customized features ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–ram distance: 500 mm Housing width: 2130 mm Ram adjustment: 120 mm Press width: 3050 mm Press depth: 3200 mm Press height: 4700 mm Table size: 2000×1200 mm Ram face size: 2000×1200 mm Stroke (fixed): 200 mm Motor power: 55 kW Weight: 51,000 kg ✅ MANUFACTURING / DELIVERY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 200 mm, širina mize: 1.200 mm, dolžina mize: 2.200 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety in large bolster and heavy die applications, thanks to their rigid frame designs. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is engineered for stable performance in high-volume production, with a focus on die protection and operator safety. With its monoblock frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable operation under continuous production conditions. Highlighted Advantages - Stable operation for large dies with a 2200×1200 mm bolster - Die/equipment protection with hydraulic overload safety system - Precision guidance through 8-point guided ram and balancer piston - Controlled, user-friendly operation via PLC and touchscreen - Advanced operator safety with light curtain protection system Areas of Application - Punching, cutting, and forming operations requiring large bolsters - Mass production integrated with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse rotation motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety guard • Enclosed gear group in oil bath • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard for bolster front • Custom dies per requirements ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg Laedpfex N R Ahsx Ahusc ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 160 t, hod: 200 mm, širina mize: 750 mm, dolžina mize: 1.100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press operated by the force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structures. CRONOSSTECH CEHP-TB-160 – H-Type Eccentric Press 160 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its mono-block frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure ensure reliable performance under continuous production conditions. Key Advantages - Stable and repeatable production with 1100×750 mm table dimensions - Die/equipment protection via hydraulic overload safety device - Controlled, user-friendly operation with PLC + touchscreen interface - Enhanced operator safety with light curtain - Low maintenance requirements thanks to automatic lubrication system Laodpfx Aex N Sbljhusc Areas of Application - Punching / Cutting / Die forming applications - Mass production with automatic feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted supplementary plate • 8-point ram guidance • Adjustable stroke via single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control unit • Piano-style control panel • Touchscreen LCD display • Motorized reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil sump with gear set • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-160) Capacity: 160 Ton Table–Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 120 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4600 mm Table Dimension: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 22 kW Weight: 18,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are handled by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 500 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 500 H-Frame Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are robust industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures balanced load distribution during pressing, providing stable and repeatable operation. The CHP 500 model is specifically designed for long-term, reliable performance in heavy-duty production processes that require high tonnage. Ljdox N T H Aspfx Ahujac CHP Series – Structural Features The CHP series presses are engineered with heavy-duty service in mind. The frame and carrier components are stress-relieved by vibration. The Zr14 bronze slide bearings ensure uniform load distribution and long-term precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components via vibration - Zr14 bronze slide bearings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on display - Cooling system - Offline filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guide H-frame press type - Frame Material: St52 – ERDEMIR - Slide Bearings: Zr14 bronze - Capacity (Ram): 500 Tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5800 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Offline Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.000 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guideway H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long lifespan. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are designed with consideration for heavy industrial environments. The frame and main support structures are stress-relieved via vibration. The Bronze Zr14 slideway bearings provide uniform load distribution and high precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guideways - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - Welding applications approved by WPQR & WPS under TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touchscreen panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert Lajdpfxjx N T Rbs Ahusc - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 1000 - Type: Steel construction, H-frame press with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Moving Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding Application: WPQR and WPS approved, certified by TÜRK-AK per EN ISO 15614-1/2017 - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Pressing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø500 mm – Ck45 (2 units) - Auxiliary Fast Forward Cylinders: 2 units - Approximate Height: 6000 mm - Approximate Width: 3450 mm - Approximate Depth: 2400 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Ruler: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.200 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP Series H-type hydraulic deep drawing presses are specially designed for deep drawing, flow forming, shaping, and heavy-duty pressing applications. Thanks to its 8-guided H-frame design, it delivers maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model provides reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved by vibration, ensuring balanced load distribution during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame with vibration technique - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guided H-frame press body Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1,200 tons Moving Table Dimensions: 1,500 × 2,000 mm Fixed Table Dimensions: 1,500 × 2,000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1,000 mm Min. Clearance: 100 mm Max. Clearance: 1,100 mm Stress Relief: Vibration stress relief Welding: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 welding certification Max. Working Pressure: 250 bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,100 mm Approx. Press Width: 3,550 mm Approx. Press Depth: 2,400 mm Lower Table Height From Floor: 1,450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Lajdpfox N T Rusx Ahusc

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, hod: 1.000 mm, širina mize: 1.800 mm, dolžina mize: 2.600 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, and metal spinning applications requiring very high tonnage. The 8-guided H-frame structure ensures maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2500 model, with its large table dimensions, multi-cylinder main pressing system, and high-capacity hydraulic unit, is designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame body type - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - Welding applications certified by TURK-AK with WPQR and WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Ability to monitor hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection Lasdpfxox N T S Ej Ahuoc - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame body type Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 Tons Movable Table Size: 1800 × 2600 mm Fixed Table Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress relieving Welding Certification: TURK-AK accredited, WPQR and WPS approved, EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec. Movable Table Drawing Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Bore: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 6500 mm Approximate Press Width: 3950 mm Approximate Press Depth: 2600 mm Height of Lower Table from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: električni, število valjev: 3, premer spodnjega valja: 190 mm, premer zgornjega valja: 190 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, moč: 4 kW (5,44 KM), STANDARD EQUIPMENT Lodpox D Dfvsfx Ahujac This mechanical model is generally manufactured for use in light and medium-duty applications. It is particularly suited for rolling materials up to 10 mm in thickness. Typical uses include aluminum processing, ventilation duct manufacturing, billboard production, machine bodyworks, sheet metal assemblies, and many similar applications. All models with planetary gearbox drive High-strength shafts made from SAE 1050 (CK 45) certified steel Welded steel main frames Hand-operated upper roll opening Movable control panel Conical bending roller Centralized lubrication system Accurate bending with brake motor and planetary gearbox Motorized rear roll for vertical movement Upper roll support system Compliant with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for pipe and profile bending tools Profile and pipe bending roll set Motorized lower roll with vertical movement Delrin-covered upper roll for Alucobond bending Adjustable speed settings NC Control TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 4/5 mm Bending Capacity: 5/6 mm Upper & Lower Roll Diameter: 190 mm Min. Bending Diameter: 285 mm Motor Power: 4 kW Rear Motor Power: 1.5 kW Length: 4700 mm Width: 950 mm Height: 1300 mm Weight: 3400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT Lsdpoxw D Udofx Ahueac - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 76 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, skupna dolžina: 5.800 mm, skupna širina: 1.550 mm, skupna višina: 1.750 mm, trajanje garancije: 12 meseci, maks. debelina aluminijaste pločevine: 4 mm, najv. debelina jeklene pločevine: 4 mm, MAXIMUM CAPACITY: Ø76x4mm MAXIMUM BENDING RADIUS: 250mm BENDING ANGLE: 190 degrees WORKING LENGTH: 4000mm MOTOR POWER: 23 kW LENGTH: 5800mm WIDTH: 1550mm HEIGHT: 1750mm BENDING SPEED: Variable STANDARD FEATURES Custom bending die set according to customer specifications Servo motor-driven feed axis Servo motor-driven rotation axis Automatic emailing of detailed work reports Servo bending axis (SFB 38-CNC/R1) Gear-driven bending system (51-65-76-90) Mobile 21” color screen CNC control unit 3D bending simulation Daily, weekly, and monthly total production quantity display Total material length calculation Estimated bending process time calculation X-Y-Z data conversion to Y-B-C Remote assistance capability Portable foot pedal with emergency stop Manual–Automatic bending modes Mandrel and non-mandrel bending Safety sheet with limit switch behind the bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Lasdpou Hix Isfx Ahujc Electric panel safety lock and key-operated cabinet lock Electric panel cooler Overload protection

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 200 t, hod: 60 mm, širina mize: 400 mm, dolžina mize: 4.200 mm, nastavitev hoda: 60 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Kapı, pencere aksesuarları sektörü için ürettiğimiz çiftli ve tekli çalışma özelliğine sahip bu preslerimiz ve besleme hatları maksimum verimlilikte uzun yıllar boyunca çalışmayı garanti eder. Yüksek adetli üretimin kaçınılmaz olduğu pencere aksesuarları sektöründe preslerimiz ve bununla beraber getireceğimiz tecrübemiz ile maksimum müşteri memnuniyeti sağlanır. -400 tona kadar baskı gücü -6000 mm'ye kadar tabla boyu -2 ve 3 biyel kolu seçeneği -Otomatik sürekli geri dönüşlü ince yağlama -Prograsif yağlama bloğu kullanımı -Arka ve önden prese ulaşılabilir olması -Manyetik sensörlü kayar kapaklar -İndüksiyon ile sertleştirilmiş ve taşlanmış dişliler -Konik kilit ile yapılan dişli-göbek geçmeleri BASIN : 200 TON DEVİR : 40-70 DEV/DAK STROK : 60 MM MASİMUM KALIP YÜKSEKLİĞİ : 340MM MASA-KOÇ YÜKSEKLİĞİ : 400MM REGLAJ AYARI : 100MM ÜST TABLA ÖLÇÜSÜ : 400X3000MM Lsdpfx Asxrbmyehueac ALT TABLA ÖLÇÜSÜ : 400X4200MM MOTOR : 18,5 KW MOTOR DEVRİ : 3000 DEV/DAK

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R – 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam-type) • Narrow lower table (European type) • GIVI brand linear scales Laodpfx Asx Nnzbshujc • Standard upper tool (H:67, 850 R:08) • Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4, 6, and 8-axis backgauge configurations starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping systems • Wide lower table for multi-way dies • Backgauge X travel: 1000 mm • AKAS or DSP laser-guided front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Daylight) (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 11,300 Main Motor Power (kW) 18.5 CNC Control Unit ESA S640 CNC Axis Count Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam-type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, višina mize: 935 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 175 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow bottom table (European type) • GIVI brand linear scales • Standard top punch (H: 67, 850 R:08) • Standard bottom die (60x60 mm, 4 channels V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic top and bottom die clamping • Wide bottom table for multi-channel tooling • Backgauge X-axis travel up to 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge stop TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 175 Bending Length (mm) 3100 Clearance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 180 Ljdpfx Ahox Nn U Ueusac Machine Weight (kg) 9700 Main Motor Power (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 2 °, frekvenca hodov (min.): 15 obr/min, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke, and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic adjustment of cutting angle according to material type and thickness Automatic stroke reduction for short sheet cutting (higher speed) CNC software infrastructure to reduce operator errors Heavy-duty steel construction frame subjected to stress-relieving process Hardened guides and roller-equipped upper beam movement system 1,000 mm CNC-controlled, motorized, and programmable backgauge Backgauge features: - Programmable retract function - Lift-up feature for long parts - ±0.1 mm positioning accuracy Ball transfer front support table Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special linkage system minimizing maintenance requirements Front squaring arms with ruler, T-slots, and stops (1,000 mm) Cutting line illumination and shadow wire Front finger guard (retractable type) Front and side safety guards Foot pedal Movable control pendant Emergency stop buttons Safety equipment conforming to CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with forward feeding) Angle-adjustable front gauge (0–180°) Front squaring arms in custom lengths Full-length front finger guard (openable) Lasdsx Nqp Ijpfx Ahuec Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line indicator Oil heater or oil cooler Automatic or manual central lubrication system Electrical cabinet with air-conditioned cooling system CNC-controlled front sheet support and feed arms Custom throat depth (500 mm) Light-duty safety guards TECHNICAL SPECIFICATIONS (MODEL C 06 / 3100) Cutting capacity (450 N/mm²): 6 mm Cutting capacity (700 N/mm²): 4 mm Cutting length: 3,100 mm Cutting angle: 0.5° – 2° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge stroke (X axis): 1,000 mm Cutting speed: 10 – 15 strokes/min Motor power: 10 kW Oil tank capacity: 200 liters Machine weight: ~6.7 tons Machine dimensions (LxWxH): approx. 4,830 x 2,995 x 1,975 mm

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 60 mm, radij upogibanja (maks.): 200 mm, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 12 MONTHS Steel tube capacity: 60 x 3 mm Easy one-touch control allows any operator to program the bending angle and automatically save it. Lasdpevn Euqefx Ahujc Single bending speed Initiate the bending cycle from the control panel or via the integrated foot pedal Designed on a cabinet with wheels and handles for easy mobility.

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, prebijalna sila: 200 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 60 mm, nastavitev hoda: 180 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready use with PLC control and dual hand/foot controls Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction Ledpjvtyx Ijfx Ahujac • Four-surface slide guides • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Central, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-solenoid safety valve • Manually adjustable stroke • Light curtain hand–finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor movement • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Decoiler, feeder, and straightener • One set of tooling/custom die as requested • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Bed–ram distance: 500 mm Slide–bed distance: 600 mm Distance between uprights: 510 mm Ram adjustment (shut height): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchor distance: 920 mm Side anchor distance: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping slot diameter: Ø60 mm Ram size: 620×350 mm Floor to bed height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: If you require any changes to the technical specifications, please let us know. ✅ MANUFACTURING / SUPPLY NOTE: This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting parts are stress-relieved via vibration. Bronze Zr14 material is used for the slide bearings, providing long-lasting and stable operation. Key Advantages - 8-guided H-frame structure - Vibration stress-relieved steel construction - Welding applications in compliance with ISO standards - PLC-controlled operation with touch screen interface - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Stress-relieved frame and support components by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured to meet CE standards - PLC-controlled hydraulic system - Touch panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination indicator - Monitoring of hydraulic unit oil temperature and system conditions via display - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Ton Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ljdpfx Ahox N Tx Sjujac Stroke (Ram): 500 mm Min. Clear Opening: 100 mm Max. Clear Opening: 600 mm Stress Relief Method: Vibration stress relief Welding Certification: Accredited WPQR and WPS by TÜRK-AK; welding application certificate per EN ISO 15614-1/2017 (monitored by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200 H-Frame Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibratory stress-relieved frame and load-bearing components - Bronze Zr14 slide bearings - WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7") - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status Lajdpfx Ahex N T D Ujujc - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration stress relief Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 60 t, hod: 400 mm, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 20 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 60/20 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-post hydraulic deep drawing press is a robust and compact solution designed for precise metal forming, deep drawing, and spinning applications. The four-post construction ensures stable parallelism and perpendicularity tolerances are maintained throughout the pressing process. The frame is manufactured from St52 grade steel and undergoes stress relief treatment via vibration. The ram and blankholder systems are independently controllable; stroke and pressure adjustments can be set precisely via the touchscreen panel. Outfitted with REXROTH or PARKER brand hydraulic components, IE3 class motors, and an automatic lubrication system, it offers long-lasting, safe, and efficient operation. Operator errors are minimized with its PLC-controlled system. This model is an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid four-post press frame - Independent stroke and tonnage control for ram and blankholder - Adjustable system via touchscreen panel - High precision and repeatability - Low maintenance requirement, long service life Applications - Metal spinning operations - Deep drawing processes - Die testing and prototype productions - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMİR POST DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (BLANKHOLDER): 20 Ton DISTANCE BETWEEN POSTS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (BLANKHOLDER): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELD STRESS RELIEF: Vibration stress relieving WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, complies with EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/sec MOVING TABLE PRESSING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec BLANKHOLDER TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 BLANKHOLDER CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm Lajdpfx Ahjx N Ulgjujc APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM/BLANKHOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Displayed on screen DIE MEMORY: Adjustable via screen LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 80 t, hod: 500 mm, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 30 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Spinning Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic spinning press is an industrial press solution designed for metal spinning, deep drawing, and die trial applications that require high precision. It features a rigid four-column body structure. The body is constructed from St52 grade steel, stress-relieved by vibration to ensure high parallelism and perpendicularity tolerances during pressing. The ram and die cushion systems operate independently; stroke and pressure settings can be precisely controlled from the operator panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled architecture, the press offers long life, safety, and energy efficiency. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. This model is an ideal solution for small and medium batch production, die trials, and precision forming operations. Key Advantages - Rigid four-column press frame construction - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touchscreen panel - High repeatability and accuracy - Low maintenance cost, long service life Application Areas - Metal spinning - Deep drawing operations - Die trials and prototype manufacturing - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons CAPACITY (DIE CUSHION): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DISTANCE BETWEEN TABLES: 100 mm MAX. DISTANCE BETWEEN TABLES: 600 mm STRESS RELIEVING: Vibration method WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 Lasdpfx Asx N Ultshuoc MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST APPROACH SPEED: 150 mm/sec MOVABLE TABLE SPINNING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE DIAMETER: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE DIAMETER: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE MACHINE HEIGHT: 3300 mm APPROXIMATE MACHINE WIDTH: 1050 mm APPROXIMATE MACHINE DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm MAIN FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (Adjustable via screen) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable via screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, hod: 800 mm, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 80 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-column hydraulic deep drawing press is a high-rigidity hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The ST52 grade steel frame undergoes stress relief via vibration treatment to ensure long-term high parallelism and perpendicularity tolerances. The ram and cushion systems operate independently, allowing precise adjustment of stroke and pressure via the touchscreen panel. Featuring REXROTH or PARKER hydraulic components, IE3 class motors, and PLC-controlled structure, this model delivers high efficiency and reliable operation. Automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton capacity, this model is ideal for medium and heavy-duty metal forming, deep drawing, and die applications—making it the perfect industrial press solution. Key Advantages - High-rigidity four-column frame design - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Long service life and low maintenance design Application Areas - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes Ledpfxjx N Um Re Ahueac ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 250 Ton CAPACITY (CUSHION): 80 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm LOWER TABLE HEIGHT FROM GROUND: 1300 mm MAIN FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.